SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 Re: Help & Support (Crunchbang 11 "Waldorf") » Empty tint2 icons after waking up from sleep » 2012-03-26 15:04:10

Hi to everybody,
I do experience the same problem with widening gap right to the systray area - the area is active and shows battery data.
I have also tried several changes to config file but with no success. I even deleted the battery section - the problem persists:(
Regards,
D*

#2 Re: Help & Support (Crunchbang 11 "Waldorf") » [SOLVED] Cannot see content of CDs and DVDs burned in Win7 [SOLVED] » 2011-12-28 11:51:02

Hi,
thanks for your advice with the PCmanFM:) Well, I do not have Win7 anymore - I used to burn CDs when I was employed ... now I am more then 6 month @home hopelessly searching for a new job and my only comp is running @this point of time only !#CB ... now I found also another CD that was burned under Vista and it has the same problem - no show in Thunar.
I helpped myself with:

sudo mount -t iso9660 /dev/sr0 /media/cdrom

After this I can see its content in /media/cdrom (also in Thunar)...
This will do the work for me for this moment. I best believe that some keen on pro will once recognize where thr BUG is and it will be resolved... I am so lazy stupid idiot that I have no power to help anyone including myself better.

I've been strongly hit by the over-all paralysis of unknown origin...

Gud Luck on your side!
I close this post 4 now.

#3 Re: Help & Support (Crunchbang 11 "Waldorf") » [SOLVED] Cannot see content of CDs and DVDs burned in Win7 [SOLVED] » 2011-12-28 09:19:29

I am using the currently last release of !#CB in the default install on my ThinkPad X61.
Well, all I do is:
1) I insert a DVD or CD in my Samsung SE-S084 device and then usually the disc is automatically mounted so I can see the content of the disk in Thunar
2) If I insert DVD or CD that was burned under Win7 (that is by now the only difference I can clearly recognize it from others that work just fine) and NOTHING happens.
I do not see any obvious reason why shoud that happen. I am just a user. I do no tricks from bash - I do not know any commands what so ever. All I do is CUT and PASTE what is suggestet (while in bash.)
If there is noone who could understand my problem from what I am describing - then I see no way for me using any LINUX at all --- for my own loss:((( And I have to either crucify myself or submit to slavery of Windows.
Anyway - thanks for your time.

#4 Help & Support (Crunchbang 11 "Waldorf") » [SOLVED] Cannot see content of CDs and DVDs burned in Win7 [SOLVED] » 2011-12-28 08:18:27

dalbrecht77
Replies: 7

Hello evevrybody,
I could't find any help for to above mentioned problem. Sorry, I do not have always a whole day to find how to do something so natural like viewing a content of a CD (although) burbned in Win7.
I love !#CB very much, but sometimes it drives me mad....
Please help. I do not want to go back to M$:(

#6 Help & Support (Crunchbang 11 "Waldorf") » Bluetooth setup for ThinkPad X61 » 2011-12-10 09:02:39

dalbrecht77
Replies: 0

Hello all,
I would appreciate any help on setting the bluetooth-applet. My bluetooth works just fine, the only thing that drives me crazy is that I do not use it very often... I do not need to use it, but I need to use wifi and as long as thouse to are bound together I want the bluetooth to be switched off right after the laptop starts.
I have tried
/etc/bluetooth/main.conf  key "InitiallyPowered =" set to false instead to default (true), but it screws things up - the icon for bluetooth-applet says "off" but the hw device is still on and it cannot be changed
The same thing happens if I change
file:///etc/default/bluetooth
key BLUETOOTH_ENABLED=1 to 0

The problem must be probably in the HW switch for wireless devices on the laptop
---
So I need a help on how to just change the propriety of the bluetooth-applet "Turn On/Off Bluetooth" after it start automatically. Because to do it everytime I start my laptop manually.... it just drives me nuts:(

Any advice will be a gr8 help to every owner of this hi-tech history item:)

#7 Help & Support (Crunchbang 11 "Waldorf") » What is the "Fn" key modifier for OpenBox RC? [Solved] » 2011-12-10 08:48:49

dalbrecht77
Replies: 4

Hello,
I would use a pro-help on setting the keyboard shortcut combinations marked on my Lenovo ThinkPad X61 keyboard - Especially for Fn + F5, Fn + F2, Fn + F3 and Fn + F4 combinations.
I cannot find any help on "Fn" key modifier for openbox rc file.
Is there any script that sets it all at once?

#8 Re: Help & Support (Crunchbang 11 "Waldorf") » Crunchbanglinux Statler - Error in the image-checksum [Solved] » 2011-09-05 08:57:24

Sorry Paper82,
I know I should have replied long long ago. I am a complete freak - I have tried many OSs -- all the Bunts, OpenSUSE, fedora... and many small distros. My OEM OS is Win Vista Business - which is now my second OS. Since this summer my primary OS is CBL:)
Now almost everything runs smooth.

The only thing I cannot figure out is how to re-eneable Trackpoint scrolling after Sleep. Do you know how to achieve that?

#9 Re: Help & Support (Crunchbang 11 "Waldorf") » ThinkPad X61 - volume buttons [Solved] » 2011-09-05 08:50:43

Thanks again!
@ the end I've used xbindkeys-config ... don't know if it is the best (=simplest) possible way (I suppose not)...

#10 Re: Help & Support (Crunchbang 11 "Waldorf") » CB Statler - TrackPoint Scrolling on ThinkPad X61 [Solved] » 2011-09-05 07:14:17

By the way - just now I realized that after wake-up from sleep trackpoint scrolling stopped working - but I already found a solution. The script is similar and works also after wake-up from sleep:

xinput list | sed -ne 's/^[^ ][^V].*id=\([0-9]*\).*/\1/p' | while read id
do
        case `xinput list-props $id` in
        *"Middle Button Emulation"*)
                xinput set-int-prop $id "Evdev Wheel Emulation" 8 1
                xinput set-int-prop $id "Evdev Wheel Emulation Button" 8 2
                xinput set-int-prop $id "Evdev Wheel Emulation Timeout" 8 200
                xinput set-int-prop $id "Evdev Wheel Emulation Axes" 8 6 7 4 5
                xinput set-int-prop $id "Evdev Middle Button Emulation" 8 0
                ;;
        esac
done

#11 Re: Help & Support (Crunchbang 11 "Waldorf") » ThinkPad X61 - volume buttons [Solved] » 2011-09-02 08:54:33

Hi again, it is a long time since I asked for help.
Now I have tried but my buttons for Volume UP/DOWN/MUTE still doesn't work.
I should say aloud that I am far from being guru and even far from being whatever in Linux.
I have been using Ubuntu for a long time - because it just worked Out of the BOX. Ubuntu is no more option for me.
I love CB for its purity... but somehow I cannot help myself with the buttons. I've installed xbindkeys, I have also put it into autostart.sh - but it still does not work:(

I need a step by step description what to do... I would be really grateful if someone be so nice to help such an stupid asshole as I am...
thankx

#13 Help & Support (Crunchbang 11 "Waldorf") » Crunchbanglinux Statler - Error in the image-checksum [Solved] » 2010-12-16 08:57:35

dalbrecht77
Replies: 5

Hello,
I maight not mention it, but I've never writen any code and I am not used to Linux administration. So I would appreciate advices based on no knowledge.
I've downlodaed the i686 image and burnt it to CD-R - and it had several errors while booting the live image, so I did another attempt to download it and burt it to 8" DVD-RW and it was better, but still I receive the MD5 checksum error while trying to check the disk in the text install.
I am probably doing something wrong, but I don't know what it is. Please help me how to check the disk before install. You know, I ma used to click on an item in menu that does it for me without needing to know anythig more. Please pardon me for this lazy attitude.
Daniel

#15 Help & Support (Crunchbang 11 "Waldorf") » CB Statler - TrackPoint Scrolling on ThinkPad X61 [Solved] » 2010-12-15 15:10:12

dalbrecht77
Replies: 8

Hello,
is there anyone who could help me with setting up TrackPoint Scrolling on ThinkPad X61? I am used to scroll that way from Windows and Ubuntu. I have tried CrunchbangLinux when it used to be based on Ubuntu - 8.10 and then 9.04... And now when its not derived from Ubuntu - I believe it can be better than ever:)
I love OpenBox and I am willing to shift back to CrunchBang just after I will be sure I can set-up a couple of details.
Please help. I am offering help in exchange. I cannot write code, but I do consider myself as a reliable business analyst - so if there is anything I can be of use - do not hesitate to challenge me.
Daniel

#16 Re: Help & Support (Crunchbang 11 "Waldorf") » ThinkPad X61 - volume buttons [Solved] » 2009-05-06 12:06:28

Thank you very much for your kind help. I am sure I can find a solution for me now.

#17 Help & Support (Crunchbang 11 "Waldorf") » ThinkPad X61 - volume buttons [Solved] » 2009-05-05 12:11:43

dalbrecht77
Replies: 6

Hi! Is there anybody who could help me with the set-up of HW volume buttons? They does't work after clear install of !# 8.10.02 ... many thanx in advance!

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.
Server: acrobat

Debian Logo