You are not logged in.
Hey,
My Crunchbang doesn't start a desktop anymore. I did try to install proprietary drivers (for steam etc), if I remember correctly (was some time ago).
But it didn't work and now im facing only a console login after boot. I'm missing my crunchbang and want to recover it. I don't really care what driver it uses now, I just need a GUI again
As I did this some time ago, I don't remember what I did excactly... I hope someone can help me....Must be a small change, but I don't remeber what
(had a common problem when I tried the same some months ago)
I attach some output that I think are maybe relevant:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/phenom-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffb8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffb8000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000bffee000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4N68T-M LE, BIOS 1401 07/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffa0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffa0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ bff9f000-bffa0000
[ 0.000000] RAMDISK: 369ac000 - 374ce000
[ 0.000000] ACPI: RSDP 00000000000fb6d0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bffa0100 0005C (v01 070511 XSDT1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffa0290 000F4 (v03 070511 FACP1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffa0460 079CA (v01 A1556 A1556000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bffb8000 00040
[ 0.000000] ACPI: APIC 00000000bffa0390 00090 (v01 070511 APIC1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffa0420 0003C (v01 070511 OEMMCFG 20110705 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffb8040 00071 (v01 070511 OEMB1826 20110705 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bffa7e30 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000bffa7f40 00038 (v01 070511 OEMHPET0 20110705 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bffa7f80 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,c0000000) -> [0,c0000000)
[ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bffa0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048363
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767960 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffb8000
[ 0.000000] PM: Registered nosave memory: 00000000bffb8000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000bffee000
[ 0.000000] PM: Registered nosave memory: 00000000bffee000 - 00000000bfff0000
[ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82944 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030438
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/phenom-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2558000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3983920k/5242880k available (3432k kernel code, 1049428k absent, 209532k reserved, 3307k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.803 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.60 BogoMIPS (lpj=11251212)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004047] Security Framework initialized
[ 0.004051] AppArmor: AppArmor disabled by boot time parameter
[ 0.004242] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005603] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006213] Mount-cache hash table entries: 256
[ 0.006303] Initializing cgroup subsys cpuacct
[ 0.006307] Initializing cgroup subsys memory
[ 0.006316] Initializing cgroup subsys devices
[ 0.006318] Initializing cgroup subsys freezer
[ 0.006320] Initializing cgroup subsys net_cls
[ 0.006321] Initializing cgroup subsys blkio
[ 0.006326] Initializing cgroup subsys perf_event
[ 0.006348] tseg: 0000000000
[ 0.006358] CPU: Physical Processor ID: 0
[ 0.006359] CPU: Processor Core ID: 0
[ 0.006360] mce: CPU supports 6 MCE banks
[ 0.006607] ACPI: Core revision 20110623
[ 0.011414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051111] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
[ 0.052002] Performance Events: AMD PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 48
[ 0.052002] ... generic registers: 4
[ 0.052002] ... value mask: 0000ffffffffffff
[ 0.052002] ... max period: 00007fffffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000000000f
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 96000
[ 0.140023] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.140093] #2
[ 0.140095] smpboot cpu 2: start_ip = 96000
[ 0.232025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.232103] #3
[ 0.232104] smpboot cpu 3: start_ip = 96000
[ 0.324050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.324129] #4
[ 0.324130] smpboot cpu 4: start_ip = 96000
[ 0.416037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.416140] #5 Ok.
[ 0.416142] smpboot cpu 5: start_ip = 96000
[ 0.508045] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.508066] Brought up 6 CPUs
[ 0.508068] Total of 6 processors activated (33753.55 BogoMIPS).
[ 0.512200] devtmpfs: initialized
[ 0.517334] PM: Registering ACPI NVS region at bffb8000 (163840 bytes)
[ 0.517334] print_constraints: dummy:
[ 0.517334] NET: Registered protocol family 16
[ 0.517334] node 0 link 0: io port [1000, ffffff]
[ 0.517334] TOM: 00000000c0000000 aka 3072M
[ 0.517334] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.517334] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.517334] node 0 link 0: mmio [a0000, bffff]
[ 0.517334] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
[ 0.517334] TOM2: 0000000140000000 aka 5120M
[ 0.517334] bus: [00, 07] on node 0 link 0
[ 0.517334] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.517334] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.517334] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.517334] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.517334] bus: 00 index 4 [mem 0x140000000-0xfcffffffff]
[ 0.517334] Extended Config Space enabled on 1 nodes
[ 0.517334] ACPI: bus type pci registered
[ 0.517334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.517334] PCI: not using MMCONFIG
[ 0.517334] PCI: Using configuration type 1 for base access
[ 0.517334] PCI: Using configuration type 1 for extended access
[ 0.517334] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.517334] mtrr: probably your BIOS does not setup all CPUs.
[ 0.517334] mtrr: corrected configuration.
[ 0.517334] bio: create slab <bio-0> at 0
[ 0.517334] ACPI: Added _OSI(Module Device)
[ 0.517334] ACPI: Added _OSI(Processor Device)
[ 0.517334] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.517334] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.517334] ACPI: EC: Look up EC in DSDT
[ 0.520485] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.564711] ACPI: Interpreter enabled
[ 0.564716] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.564733] ACPI: Using IOAPIC for interrupt routing
[ 0.564748] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.566177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.579696] ACPI: No dock devices found.
[ 0.579698] HEST: Table not found.
[ 0.579701] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.579820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.579946] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.579948] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.579949] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.579951] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.579953] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.579954] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.579976] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
[ 0.580149] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
[ 0.580155] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.580205] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[ 0.580215] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.580229] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.580234] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.580261] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.580274] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[ 0.580312] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[ 0.580320] pci 0000:00:02.0: reg 10: [mem 0xdfcfb000-0xdfcfbfff]
[ 0.580353] pci 0000:00:02.0: supports D1 D2
[ 0.580355] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580367] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[ 0.580376] pci 0000:00:02.1: reg 10: [mem 0xdfcfac00-0xdfcfacff]
[ 0.580414] pci 0000:00:02.1: supports D1 D2
[ 0.580416] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580434] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[ 0.580471] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[ 0.580483] pci 0000:00:05.0: reg 10: [mem 0xdfcf4000-0xdfcf7fff]
[ 0.580521] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.580539] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[ 0.580559] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.580587] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[ 0.580596] pci 0000:00:07.0: reg 10: [mem 0xdfcf9000-0xdfcf9fff]
[ 0.580600] pci 0000:00:07.0: reg 14: [io 0xc480-0xc487]
[ 0.580636] pci 0000:00:07.0: supports D1 D2
[ 0.580637] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580650] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[ 0.580657] pci 0000:00:08.0: reg 10: [io 0xc400-0xc407]
[ 0.580661] pci 0000:00:08.0: reg 14: [io 0xc080-0xc083]
[ 0.580664] pci 0000:00:08.0: reg 18: [io 0xc000-0xc007]
[ 0.580667] pci 0000:00:08.0: reg 1c: [io 0xbc00-0xbc03]
[ 0.580671] pci 0000:00:08.0: reg 20: [io 0xb880-0xb88f]
[ 0.580674] pci 0000:00:08.0: reg 24: [mem 0xdfcf8000-0xdfcf8fff]
[ 0.580698] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[ 0.580705] pci 0000:00:08.1: reg 10: [io 0xb800-0xb807]
[ 0.580708] pci 0000:00:08.1: reg 14: [io 0xb480-0xb483]
[ 0.580712] pci 0000:00:08.1: reg 18: [io 0xb400-0xb407]
[ 0.580715] pci 0000:00:08.1: reg 1c: [io 0xb080-0xb083]
[ 0.580719] pci 0000:00:08.1: reg 20: [io 0xb000-0xb00f]
[ 0.580722] pci 0000:00:08.1: reg 24: [mem 0xdfcef000-0xdfceffff]
[ 0.580752] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[ 0.580774] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580786] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[ 0.580808] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580819] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[ 0.580841] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.580859] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.580872] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.580883] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.580895] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.580908] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.580946] pci 0000:01:06.0: [1106:3038] type 0 class 0x000c03
[ 0.580977] pci 0000:01:06.0: reg 20: [io 0xdc00-0xdc1f]
[ 0.581004] pci 0000:01:06.0: supports D1 D2
[ 0.581006] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.581018] pci 0000:01:06.1: [1106:3038] type 0 class 0x000c03
[ 0.581049] pci 0000:01:06.1: reg 20: [io 0xd880-0xd89f]
[ 0.581076] pci 0000:01:06.1: supports D1 D2
[ 0.581077] pci 0000:01:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.581090] pci 0000:01:06.2: [1106:3104] type 0 class 0x000c03
[ 0.581101] pci 0000:01:06.2: reg 10: [mem 0xdfdffc00-0xdfdffcff]
[ 0.581148] pci 0000:01:06.2: supports D1 D2
[ 0.581149] pci 0000:01:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.581178] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.581181] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.581183] pci 0000:00:04.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.581186] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.581188] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.581190] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.581192] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.581194] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.581196] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.581220] pci 0000:02:00.0: [1002:68da] type 0 class 0x000300
[ 0.581229] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.581236] pci 0000:02:00.0: reg 18: [mem 0xdfee0000-0xdfefffff 64bit]
[ 0.581241] pci 0000:02:00.0: reg 20: [io 0xe800-0xe8ff]
[ 0.581250] pci 0000:02:00.0: reg 30: [mem 0xdfec0000-0xdfedffff pref]
[ 0.581272] pci 0000:02:00.0: supports D1 D2
[ 0.581286] pci 0000:02:00.1: [1002:aa60] type 0 class 0x000403
[ 0.581295] pci 0000:02:00.1: reg 10: [mem 0xdfebc000-0xdfebffff 64bit]
[ 0.581334] pci 0000:02:00.1: supports D1 D2
[ 0.588050] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.588055] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.588057] pci 0000:00:09.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.588060] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.588101] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[ 0.588125] pci 0000:03:00.0: reg 10: [mem 0xdfffe000-0xdfffffff 64bit]
[ 0.588219] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.596054] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.596058] pci 0000:00:0b.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 0.596081] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.596093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.596224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.596270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.596298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.596325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.596429] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.596586] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.596588] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.600254] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.600342] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 0.600427] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.600510] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.600595] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 0.600676] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.600747] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.600819] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.600891] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.600963] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.601035] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.601113] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.601184] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.601259] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.601337] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.601409] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.601481] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.601566] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.601639] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.601639] vgaarb: loaded
[ 0.601639] vgaarb: bridge control possible 0000:02:00.0
[ 0.601639] PCI: Using ACPI for IRQ routing
[ 0.607666] PCI: pci_cache_line_size set to 64 bytes
[ 0.607715] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 0.607717] reserve RAM buffer: 00000000bffa0000 - 00000000bfffffff
[ 0.607797] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.607802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.607805] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.628210] Switching to clocksource hpet
[ 0.629343] pnp: PnP ACPI init
[ 0.629355] ACPI: bus type pnp registered
[ 0.629437] pnp 00:00: [bus 00-ff]
[ 0.629439] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.629441] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.629443] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.629445] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.629447] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.629449] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.629451] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.629486] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.629508] pnp 00:01: [dma 4]
[ 0.629510] pnp 00:01: [io 0x0000-0x000f]
[ 0.629511] pnp 00:01: [io 0x0081-0x0083]
[ 0.629513] pnp 00:01: [io 0x0087]
[ 0.629515] pnp 00:01: [io 0x0089-0x008b]
[ 0.629517] pnp 00:01: [io 0x008f]
[ 0.629518] pnp 00:01: [io 0x00c0-0x00df]
[ 0.629540] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.629549] pnp 00:02: [io 0x0070-0x0071]
[ 0.629560] pnp 00:02: [irq 8]
[ 0.629579] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.629586] pnp 00:03: [io 0x0061]
[ 0.629607] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.629614] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.629622] pnp 00:04: [irq 13]
[ 0.629645] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.630266] pnp 00:05: [io 0x0378-0x037f]
[ 0.630273] pnp 00:05: [irq 7]
[ 0.630275] pnp 00:05: [dma 0 disabled]
[ 0.630495] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.630787] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.630789] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.630791] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.630793] pnp 00:06: [io 0x0010-0x001f]
[ 0.630794] pnp 00:06: [io 0x0022-0x003f]
[ 0.630795] pnp 00:06: [io 0x0044-0x004d]
[ 0.630797] pnp 00:06: [io 0x0050-0x005f]
[ 0.630798] pnp 00:06: [io 0x0062-0x0063]
[ 0.630800] pnp 00:06: [io 0x0065-0x006f]
[ 0.630801] pnp 00:06: [io 0x0072-0x007f]
[ 0.630802] pnp 00:06: [io 0x0080]
[ 0.630804] pnp 00:06: [io 0x0084-0x0086]
[ 0.630806] pnp 00:06: [io 0x0088]
[ 0.630807] pnp 00:06: [io 0x008c-0x008e]
[ 0.630808] pnp 00:06: [io 0x0090-0x009f]
[ 0.630810] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.630811] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.630813] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.630814] pnp 00:06: [io 0x0800-0x080f]
[ 0.630815] pnp 00:06: [io 0x0500-0x057f]
[ 0.630817] pnp 00:06: [io 0x0580-0x05ff]
[ 0.630818] pnp 00:06: [io 0x0800-0x087f]
[ 0.630819] pnp 00:06: [io 0x0880-0x08ff]
[ 0.630821] pnp 00:06: [io 0x0d00-0x0d7f]
[ 0.630822] pnp 00:06: [io 0x0d80-0x0dff]
[ 0.630823] pnp 00:06: [io 0x0900-0x097f]
[ 0.630825] pnp 00:06: [io 0x0980-0x09ff]
[ 0.630826] pnp 00:06: [io 0x1100-0x117f]
[ 0.630828] pnp 00:06: [io 0x1180-0x11ff]
[ 0.630829] pnp 00:06: [mem 0xfec80000-0x1fd93ffff]
[ 0.630831] pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
[ 0.630832] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
[ 0.630833] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.630839] pnp 00:06: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.630841] pnp 00:06: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.630910] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.630912] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.630914] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.630916] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.630918] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.630920] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.630922] system 00:06: [io 0x0d00-0x0d7f] has been reserved
[ 0.630924] system 00:06: [io 0x0d80-0x0dff] has been reserved
[ 0.630926] system 00:06: [io 0x1100-0x117f] has been reserved
[ 0.630928] system 00:06: [io 0x1180-0x11ff] has been reserved
[ 0.630930] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.630932] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.630934] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.630936] system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[ 0.630938] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.630940] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.630942] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.630944] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.630993] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.631013] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.631057] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.631059] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.631060] pnp 00:08: [mem 0xc0000000-0xbfffffff disabled]
[ 0.631091] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.631094] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.631096] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.631223] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.631225] pnp 00:09: [io 0x0230-0x023f]
[ 0.631226] pnp 00:09: [io 0x0290-0x029f]
[ 0.631228] pnp 00:09: [io 0x0a00-0x0a0f]
[ 0.631230] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.631263] system 00:09: [io 0x0230-0x023f] has been reserved
[ 0.631265] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.631267] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.631269] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.631271] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.631710] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.631718] pnp 00:0a: [irq 4]
[ 0.631719] pnp 00:0a: [dma 0 disabled]
[ 0.631788] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.631818] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.631823] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.631825] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.631948] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.631950] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.631952] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.631953] pnp 00:0c: [mem 0x00100000-0xbfffffff]
[ 0.631955] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.631998] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.632007] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.632009] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.632012] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.632014] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.632017] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.632236] pnp: PnP ACPI: found 13 devices
[ 0.632237] ACPI: ACPI bus type pnp unregistered
[ 0.638876] PCI: max bus depth: 1 pci_try_num: 2
[ 0.638889] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.638891] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.638894] pci 0000:00:04.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.638898] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.638900] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.638902] pci 0000:00:09.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.638904] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.638907] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.638909] pci 0000:00:0b.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 0.638912] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.638919] pci 0000:00:04.0: setting latency timer to 64
[ 0.638923] pci 0000:00:09.0: setting latency timer to 64
[ 0.638926] pci 0000:00:0b.0: setting latency timer to 64
[ 0.638929] pci 0000:00:0c.0: setting latency timer to 64
[ 0.638931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.638933] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.638934] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.638936] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.638937] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.638939] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.638941] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.638942] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.638944] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.638945] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.638947] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.638948] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.638950] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.638951] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.638953] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.638955] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.638956] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.638958] pci_bus 0000:03: resource 1 [mem 0xdff00000-0xdfffffff]
[ 0.639095] NET: Registered protocol family 2
[ 0.640378] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.641219] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.643724] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.644053] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.644055] TCP reno registered
[ 0.644062] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.644089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.644274] NET: Registered protocol family 1
[ 0.644504] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.224195] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.224318] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224364] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224418] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224471] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224523] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224578] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224641] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224701] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.224829] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 1.224967] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 1.225101] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[ 1.225176] pci 0000:02:00.0: Boot video device
[ 1.225314] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16
[ 1.225357] PCI: CLS 64 bytes, default 64
[ 1.225404] Unpacking initramfs...
[ 1.401706] Freeing initrd memory: 11400k freed
[ 1.405046] PCI-DMA: Disabling AGP.
[ 1.407805] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.407807] PCI-DMA: using GART IOMMU.
[ 1.407810] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.411892] IBS: LVT offset 1 assigned
[ 1.411928] perf: AMD IBS detected (0x0000001f)
[ 1.412150] audit: initializing netlink socket (disabled)
[ 1.412163] type=2000 audit(1415905010.408:1): initialized
[ 1.422039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.422819] VFS: Disk quotas dquot_6.5.2
[ 1.422851] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.422915] msgmni has been set to 7932
[ 1.423095] alg: No test for stdrng (krng)
[ 1.423139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.423142] io scheduler noop registered
[ 1.423143] io scheduler deadline registered
[ 1.423173] io scheduler cfq registered (default)
[ 1.423264] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.423288] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.423347] pcieport 0000:00:0b.0: setting latency timer to 64
[ 1.423364] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 1.423411] pcieport 0000:00:0c.0: setting latency timer to 64
[ 1.423426] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 1.423489] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.423516] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.423518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.423709] ERST: Table is not found!
[ 1.423710] GHES: HEST is not enabled!
[ 1.423777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.444111] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.584692] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.604275] Linux agpgart interface v0.103
[ 1.604376] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.604822] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.604828] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.604962] mousedev: PS/2 mouse device common for all mice
[ 1.605003] rtc_cmos 00:02: RTC can wake from S4
[ 1.605134] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.605171] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.605179] cpuidle: using governor ladder
[ 1.605181] cpuidle: using governor menu
[ 1.605377] TCP cubic registered
[ 1.605471] NET: Registered protocol family 10
[ 1.605887] Mobile IPv6
[ 1.605889] NET: Registered protocol family 17
[ 1.605892] Registering the dns_resolver key type
[ 1.606026] PM: Hibernation image not present or could not be loaded.
[ 1.606033] registered taskstats version 1
[ 1.606537] rtc_cmos 00:02: setting system clock to 2014-11-13 18:56:51 UTC (1415905011)
[ 1.606577] Initializing network drop monitor service
[ 1.607487] Freeing unused kernel memory: 580k freed
[ 1.607586] Write protecting the kernel read-only data: 6144k
[ 1.609563] Freeing unused kernel memory: 648k freed
[ 1.611580] Freeing unused kernel memory: 688k freed
[ 1.621627] udevd[69]: starting version 175
[ 1.631080] usbcore: registered new interface driver usbfs
[ 1.631110] usbcore: registered new interface driver hub
[ 1.631345] usbcore: registered new device driver usb
[ 1.631767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.631833] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.631836] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.631867] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.631899] ehci_hcd 0000:00:02.1: debug port 1
[ 1.631906] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.631930] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfcfac00
[ 1.634184] SCSI subsystem initialized
[ 1.640145] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.640185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.640188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640190] usb usb1: Product: EHCI Host Controller
[ 1.640191] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.640193] usb usb1: SerialNumber: 0000:00:02.1
[ 1.640372] hub 1-0:1.0: USB hub found
[ 1.640377] hub 1-0:1.0: 10 ports detected
[ 1.640507] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 1.640510] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.640523] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.640697] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.640702] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 1.640707] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.640711] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 1.640715] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 1.640720] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 1.640724] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 1.640832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.640835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640837] usb usb2: Product: xHCI Host Controller
[ 1.640838] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.640840] usb usb2: SerialNumber: 0000:03:00.0
[ 1.640935] xHCI xhci_add_endpoint called for root hub
[ 1.640938] xHCI xhci_check_bandwidth called for root hub
[ 1.640964] hub 2-0:1.0: USB hub found
[ 1.640970] hub 2-0:1.0: 2 ports detected
[ 1.641029] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.641035] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.643248] libata version 3.00 loaded.
[ 1.644236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.644239] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.644241] usb usb3: Product: xHCI Host Controller
[ 1.644242] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.644244] usb usb3: SerialNumber: 0000:03:00.0
[ 1.644339] xHCI xhci_add_endpoint called for root hub
[ 1.644341] xHCI xhci_check_bandwidth called for root hub
[ 1.644368] hub 3-0:1.0: USB hub found
[ 1.644374] hub 3-0:1.0: 2 ports detected
[ 1.644496] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.644776] ehci_hcd 0000:01:06.2: EHCI Host Controller
[ 1.644786] ehci_hcd 0000:01:06.2: new USB bus registered, assigned bus number 4
[ 1.644829] ehci_hcd 0000:01:06.2: irq 17, io mem 0xdfdffc00
[ 1.646728] sata_nv 0000:00:08.0: version 3.5
[ 1.646915] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.646963] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.647194] scsi0 : sata_nv
[ 1.647283] scsi1 : sata_nv
[ 1.647376] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 21
[ 1.647379] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 21
[ 1.647552] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.647596] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.647862] scsi2 : sata_nv
[ 1.648131] scsi3 : sata_nv
[ 1.648233] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 20
[ 1.648235] ata4: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 20
[ 1.648336] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.648490] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.648495] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.652336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.660049] ehci_hcd 0000:01:06.2: USB 2.0 started, EHCI 1.00
[ 1.660072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.660075] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660077] usb usb4: Product: EHCI Host Controller
[ 1.660078] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.660080] usb usb4: SerialNumber: 0000:01:06.2
[ 1.660198] hub 4-0:1.0: USB hub found
[ 1.660202] hub 4-0:1.0: 4 ports detected
[ 1.660306] uhci_hcd 0000:01:06.0: UHCI Host Controller
[ 1.660317] uhci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 5
[ 1.660366] uhci_hcd 0000:01:06.0: irq 19, io base 0x0000dc00
[ 1.660392] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.660394] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660396] usb usb5: Product: UHCI Host Controller
[ 1.660397] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.660399] usb usb5: SerialNumber: 0000:01:06.0
[ 1.660499] hub 5-0:1.0: USB hub found
[ 1.660502] hub 5-0:1.0: 2 ports detected
[ 1.660587] uhci_hcd 0000:01:06.1: UHCI Host Controller
[ 1.660594] uhci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 6
[ 1.660623] uhci_hcd 0000:01:06.1: irq 18, io base 0x0000d880
[ 1.660646] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.660648] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660650] usb usb6: Product: UHCI Host Controller
[ 1.660651] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.660653] usb usb6: SerialNumber: 0000:01:06.1
[ 1.660753] hub 6-0:1.0: USB hub found
[ 1.660756] hub 6-0:1.0: 2 ports detected
[ 1.713091] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 48:5b:39:ca:c1:88
[ 1.713094] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.713210] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.713212] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.713223] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 7
[ 1.713247] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfcfb000
[ 1.770036] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.770039] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.770040] usb usb7: Product: OHCI Host Controller
[ 1.770042] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.770043] usb usb7: SerialNumber: 0000:00:02.0
[ 1.770162] hub 7-0:1.0: USB hub found
[ 1.770166] hub 7-0:1.0: 10 ports detected
[ 1.770301] pata_amd 0000:00:06.0: version 0.4.1
[ 1.770331] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.770635] scsi4 : pata_amd
[ 1.770697] scsi5 : pata_amd
[ 1.771206] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.771208] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.932322] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A104, max UDMA/33
[ 1.932328] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 1.948265] ata5.00: configured for UDMA/33
[ 1.952031] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 2.084329] usb 1-4: New USB device found, idVendor=0409, idProduct=005a
[ 2.084331] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.084629] hub 1-4:1.0: USB hub found
[ 2.084702] hub 1-4:1.0: 3 ports detected
[ 2.112049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.116045] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.120323] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 2.120326] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.124252] ata3.00: ATA-8: SAMSUNG HN-M500MBB, 2AR10001, max UDMA/133
[ 2.124254] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.132249] ata3.00: configured for UDMA/133
[ 2.136333] ata1.00: configured for UDMA/133
[ 2.136509] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 2.196034] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 2.328829] usb 1-5: New USB device found, idVendor=1e3d, idProduct=2096
[ 2.328831] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.328832] usb 1-5: Product: Flash Disk
[ 2.328833] usb 1-5: Manufacturer: Generic
[ 2.328835] usb 1-5: SerialNumber: CCBB1201101830051357695300
[ 2.408030] Refined TSC clocksource calibration: 2812.791 MHz.
[ 2.408034] Switching to clocksource tsc
[ 2.440023] usb 4-2: new high-speed USB device number 2 using ehci_hcd
[ 2.573103] usb 4-2: New USB device found, idVendor=03f0, idProduct=8711
[ 2.573105] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.573106] usb 4-2: Product: Deskjet 2050 J510 series
[ 2.573108] usb 4-2: Manufacturer: HP
[ 2.573109] usb 4-2: SerialNumber: CN14K3N2RC05D1
[ 2.604061] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.612285] ata2.00: ATA-8: WDC WD10EVVS-63M5B0, 01.00A01, max UDMA/133
[ 2.612288] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.620304] ata2.00: configured for UDMA/133
[ 2.620419] scsi 1:0:0:0: Direct-Access ATA WDC WD10EVVS-63M 01.0 PQ: 0 ANSI: 5
[ 2.620620] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HN-M500M 2AR1 PQ: 0 ANSI: 5
[ 2.796025] usb 4-4: new high-speed USB device number 4 using ehci_hcd
[ 2.930420] usb 4-4: New USB device found, idVendor=058f, idProduct=6364
[ 2.930423] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.930424] usb 4-4: Product: Mass Storage Device
[ 2.930426] usb 4-4: Manufacturer: Generic
[ 2.930427] usb 4-4: SerialNumber: 058F63646476
[ 2.942329] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.942377] Initializing USB Mass Storage driver...
[ 2.942462] scsi6 : usb-storage 1-5:1.0
[ 2.942568] scsi7 : usb-storage 4-4:1.0
[ 2.942617] usbcore: registered new interface driver usb-storage
[ 2.942618] USB Mass Storage support registered.
[ 2.946156] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A104 PQ: 0 ANSI: 5
[ 2.946331] ata6: port disabled--ignoring
[ 2.948322] generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:01:06.2-4/input1
[ 2.948338] usbcore: registered new interface driver usbhid
[ 2.948339] usbhid: USB HID core driver
[ 2.952331] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.952380] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.952384] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.952401] sd 0:0:0:0: [sda] Write Protect is off
[ 2.952403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.952421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.952431] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.952434] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.952437] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.952440] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.952484] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.952498] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.960536] sda: sda1 sda2 < sda5 >
[ 2.960923] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.973328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.973375] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.973405] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.973437] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 2.980027] sdb: sdb1 sdb2 sdb3
[ 2.980349] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.010914] sdc: sdc1 sdc2 < sdc5 >
[ 3.011264] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.017373] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.017376] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.017512] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.180040] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 3.363684] usb 6-1: New USB device found, idVendor=0556, idProduct=0001
[ 3.363687] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.363689] usb 6-1: Product: AK5370
[ 3.363691] usb 6-1: Manufacturer: AKM
[ 3.452204] usb 1-4.1: new low-speed USB device number 4 using ehci_hcd
[ 3.577330] usb 1-4.1: New USB device found, idVendor=04f2, idProduct=0971
[ 3.577333] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.577334] usb 1-4.1: Product: Tt eSPORTS Challenger Pro gaming keyboard
[ 3.577336] usb 1-4.1: Manufacturer: Thermaltake
[ 3.583891] input: Thermaltake Tt eSPORTS Challenger Pro gaming keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
[ 3.583949] generic-usb 0003:04F2:0971.0002: input,hidraw1: USB HID v1.11 Keyboard [Thermaltake Tt eSPORTS Challenger Pro gaming keyboard] on usb-0000:00:02.1-4.1/input0
[ 3.598285] input: Thermaltake Tt eSPORTS Challenger Pro gaming keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.1/input/input1
[ 3.598378] generic-usb 0003:04F2:0971.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Thermaltake Tt eSPORTS Challenger Pro gaming keyboard] on usb-0000:00:02.1-4.1/input1
[ 3.684203] usb 1-4.2: new low-speed USB device number 5 using ehci_hcd
[ 3.733850] microcode: CPU0: patch_level=0x010000bf
[ 3.735718] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.735764] microcode: CPU0: new patch_level=0x010000dc
[ 3.735773] microcode: CPU1: patch_level=0x010000bf
[ 3.737541] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.737583] microcode: CPU1: new patch_level=0x010000dc
[ 3.737592] microcode: CPU2: patch_level=0x010000bf
[ 3.739293] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.739329] microcode: CPU2: new patch_level=0x010000dc
[ 3.739344] microcode: CPU3: patch_level=0x010000bf
[ 3.741196] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.741233] microcode: CPU3: new patch_level=0x010000dc
[ 3.741243] microcode: CPU4: patch_level=0x010000bf
[ 3.743008] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.743047] microcode: CPU4: new patch_level=0x010000dc
[ 3.743057] microcode: CPU5: patch_level=0x010000bf
[ 3.744890] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 3.744931] microcode: CPU5: new patch_level=0x010000dc
[ 3.744974] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.749065] device-mapper: uevent: version 1.0.3
[ 3.749118] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.801327] usb 1-4.2: New USB device found, idVendor=046d, idProduct=c01e
[ 3.801329] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.801331] usb 1-4.2: Product: USB-PS/2 Optical Mouse
[ 3.801333] usb 1-4.2: Manufacturer: Logitech
[ 3.805522] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input2
[ 3.805610] generic-usb 0003:046D:C01E.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-4.2/input0
[ 3.940468] scsi 6:0:0:0: Direct-Access Generic Flash Disk 5.00 PQ: 0 ANSI: 2
[ 3.940928] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.940948] scsi 7:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.941479] sd 6:0:0:0: [sdd] 7866368 512-byte logical blocks: (4.02 GB/3.75 GiB)
[ 3.941566] scsi 7:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.941963] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.941966] sd 6:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[ 3.942069] scsi 7:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.942458] sd 6:0:0:0: [sdd] No Caching mode page found
[ 3.942487] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.942690] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.943130] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 3.943272] sd 7:0:0:1: Attached scsi generic sg6 type 0
[ 3.943414] sd 7:0:0:2: Attached scsi generic sg7 type 0
[ 3.943754] sd 7:0:0:3: Attached scsi generic sg8 type 0
[ 3.946978] sd 6:0:0:0: [sdd] No Caching mode page found
[ 3.947008] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.947597] sdd: sdd1
[ 3.949837] sd 6:0:0:0: [sdd] No Caching mode page found
[ 3.949866] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.949894] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.957070] sd 7:0:0:1: [sdf] Attached SCSI removable disk
[ 3.958315] sd 7:0:0:2: [sdg] Attached SCSI removable disk
[ 3.960950] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 3.962193] sd 7:0:0:3: [sdh] Attached SCSI removable disk
[ 4.140240] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.250958] udevd[476]: starting version 175
[ 6.284379] EDAC MC: Ver: 2.1.0
[ 6.289158] MCE: In-kernel MCE decoding enabled.
[ 6.314933] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.314937] ACPI: Power Button [PWRB]
[ 6.314993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.314995] ACPI: Power Button [PWRF]
[ 6.322863] AMD64 EDAC driver v3.4.0
[ 6.322896] EDAC amd64: DRAM ECC disabled.
[ 6.322904] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.322905] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.322906] (Note that use of the override may cause unknown side effects.)
[ 6.380447] ACPI: resource nForce2_smbus [io 0x0600-0x063f] conflicts with ACPI region SMRG [io 0x600-0x6ff]
[ 6.380450] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.380481] i2c i2c-0: nForce2 SMBus adapter at 0x700
[ 6.492639] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.492683] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.535757] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.558484] ACPI: acpi_idle registered with cpuidle
[ 6.573029] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
[ 6.573042] powernow-k8: Core Performance Boosting: on.
[ 6.573075] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 6.573076] powernow-k8: 1 : pstate 1 (2200 MHz)
[ 6.573078] powernow-k8: 2 : pstate 2 (1500 MHz)
[ 6.573079] powernow-k8: 3 : pstate 3 (800 MHz)
[ 6.774062] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 6.774077] hda_intel: Disabling MSI
[ 6.774135] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.981160] usbcore: registered new interface driver snd-usb-audio
[ 7.410005] usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8711
[ 7.410059] usbcore: registered new interface driver usblp
[ 7.993486] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
[ 7.993623] snd_hda_intel 0000:02:00.1: irq 50 for MSI/MSI-X
[ 7.993676] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 8.023299] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 8.023569] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card2/input6
[ 9.522789] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 9.759748] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 9.883880] lp0: using parport0 (interrupt-driven).
[ 9.925593] ppdev: user-space parallel port driver
[ 9.959151] loop: module loaded
[ 10.477300] Adding 16773116k swap on /dev/mapper/phenom-swap_1. Priority:-1 extents:1 across:16773116k
[ 11.016658] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.069164] fuse init (API version 7.17)
[ 16.605505] input: uinput-unifiedremote as /devices/virtual/input/input7
[ 17.112812] usblp2: removedlsmod
Module Size Used by
nls_utf8 12456 1
nls_cp437 16553 1
vfat 17316 1
fat 45642 1 vfat
uinput 17440 1
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
cpufreq_stats 12866 0
cpufreq_powersave 12454 0
fuse 62012 3
ext2 59231 1
loop 22641 0
ppdev 12763 0
lp 17149 0
snd_hda_codec_hdmi 30824 1
snd_hda_codec_via 41160 1
usblp 17343 0
snd_usb_audio 89083 0
snd_usbmidi_lib 23369 1 snd_usb_audio
snd_seq_midi 12848 0
snd_seq_midi_event 13316 1 snd_seq_midi
snd_rawmidi 23060 2 snd_seq_midi,snd_usbmidi_lib
snd_hda_intel 26259 0
snd_hda_codec 78031 3 snd_hda_intel,snd_hda_codec_via,snd_hda_codec_hdmi
snd_hwdep 13186 2 snd_hda_codec,snd_usb_audio
snd_pcm 68083 4 snd_hda_codec,snd_hda_intel,snd_usb_audio,snd_hda_codec_hdmi
psmouse 69265 0
joydev 17266 0
snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
serio_raw 12931 0
powernow_k8 17618 1
mperf 12453 1 powernow_k8
processor 28149 7 powernow_k8
pcspkr 12579 0
k10temp 12611 0
parport_pc 22364 1
thermal_sys 18040 1 processor
snd_seq 45126 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 13176 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 22917 2 snd_seq,snd_pcm
evdev 17562 0
snd 52893 12 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_rawmidi,snd_usbmidi_lib,snd_usb_audio,snd_hda_codec_via,snd_hda_codec_hdmi
i2c_nforce2 12584 0
asus_atk0110 17297 0
parport 31858 3 parport_pc,lp,ppdev
i2c_core 23876 1 i2c_nforce2
soundcore 13065 1 snd
button 12937 0
edac_mce_amd 17103 0
edac_core 35258 0
ext4 350763 2
crc16 12343 1 ext4
jbd2 62115 1 ext4
mbcache 13114 2 ext4,ext2
dm_mod 63645 9
microcode 30126 0
sr_mod 21899 0
sg 25874 0
cdrom 35401 1 sr_mod
sd_mod 36136 7
crc_t10dif 12348 1 sd_mod
usbhid 36418 0
usb_storage 43870 1
hid 81372 1 usbhid
pata_amd 13322 0
ata_generic 12479 0
ohci_hcd 26563 0
forcedeth 49338 0
uhci_hcd 26865 0
sata_nv 26690 3
xhci_hcd 73413 0
libata 140630 3 sata_nv,ata_generic,pata_amd
scsi_mod 162321 5 libata,usb_storage,sd_mod,sg,sr_mod
ehci_hcd 40249 0
usbcore 128741 10 ehci_hcd,xhci_hcd,uhci_hcd,ohci_hcd,usb_storage,usbhid,snd_usbmidi_lib,snd_usb_audio,usblp
usb_common 12354 1 usbcorexorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1440x900"
Option "TargetRefresh" "75"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1024x768"
Option "TargetRefresh" "60"
Option "Position" "1440 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-CRT1" "0-CRT1"
Option "Monitor-CRT2" "0-CRT2"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 2464 2464
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection/var/log/X11/Xorg.0.log
[ 15.358]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 15.358] X Protocol Version 11, Revision 0
[ 15.358] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 15.358] Current Operating System: Linux phenom 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2 x86_64
[ 15.358] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/phenom-root ro quiet
[ 15.358] Build Date: 17 December 2013 07:37:58PM
[ 15.358] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 15.358] Current version of pixman: 0.32.6
[ 15.358] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.358] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.358] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 13 19:57:05 2014
[ 15.368] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.369] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.398] (==) ServerLayout "aticonfig Layout"
[ 15.398] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 15.398] (**) | |-->Monitor "<default monitor>"
[ 15.399] (**) | |-->Device "aticonfig-Device[0]-0"
[ 15.399] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 15.399] (==) Automatically adding devices
[ 15.399] (==) Automatically enabling devices
[ 15.453] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 15.453] Entry deleted from font path.
[ 15.466] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 15.466] Entry deleted from font path.
[ 15.466] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 15.466] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.466] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.466] (II) Loader magic: 0x7f07b5425ae0
[ 15.466] (II) Module ABI versions:
[ 15.466] X.Org ANSI C Emulation: 0.4
[ 15.467] X.Org Video Driver: 12.1
[ 15.467] X.Org XInput driver : 16.0
[ 15.467] X.Org Server Extension : 6.0
[ 15.468] (--) PCI:*(0:2:0:0) 1002:68da:1787:2297 rev 0, Mem @ 0xc0000000/268435456, 0xdfee0000/131072, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 15.468] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.468] (II) "extmod" will be loaded by default.
[ 15.468] (II) "dbe" will be loaded by default.
[ 15.468] (II) "glx" will be loaded by default.
[ 15.468] (II) "record" will be loaded by default.
[ 15.468] (II) "dri" will be loaded by default.
[ 15.468] (II) "dri2" will be loaded by default.
[ 15.468] (II) LoadModule: "extmod"
[ 15.494] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.514] (II) Module extmod: vendor="X.Org Foundation"
[ 15.515] compiled for 1.12.4, module version = 1.0.0
[ 15.515] Module class: X.Org Server Extension
[ 15.515] ABI class: X.Org Server Extension, version 6.0
[ 15.515] (II) Loading extension SELinux
[ 15.515] (II) Loading extension MIT-SCREEN-SAVER
[ 15.515] (II) Loading extension XFree86-VidModeExtension
[ 15.515] (II) Loading extension XFree86-DGA
[ 15.515] (II) Loading extension DPMS
[ 15.515] (II) Loading extension XVideo
[ 15.515] (II) Loading extension XVideo-MotionCompensation
[ 15.515] (II) Loading extension X-Resource
[ 15.515] (II) LoadModule: "dbe"
[ 15.515] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.523] (II) Module dbe: vendor="X.Org Foundation"
[ 15.523] compiled for 1.12.4, module version = 1.0.0
[ 15.523] Module class: X.Org Server Extension
[ 15.523] ABI class: X.Org Server Extension, version 6.0
[ 15.523] (II) Loading extension DOUBLE-BUFFER
[ 15.523] (II) LoadModule: "glx"
[ 15.523] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.544] (II) Module glx: vendor="X.Org Foundation"
[ 15.544] compiled for 1.12.4, module version = 1.0.0
[ 15.544] ABI class: X.Org Server Extension, version 6.0
[ 15.544] (==) AIGLX enabled
[ 15.549] (II) Loading extension GLX
[ 15.549] (II) LoadModule: "record"
[ 15.549] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.550] (II) Module record: vendor="X.Org Foundation"
[ 15.550] compiled for 1.12.4, module version = 1.13.0
[ 15.550] Module class: X.Org Server Extension
[ 15.550] ABI class: X.Org Server Extension, version 6.0
[ 15.550] (II) Loading extension RECORD
[ 15.550] (II) LoadModule: "dri"
[ 15.550] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.572] (II) Module dri: vendor="X.Org Foundation"
[ 15.572] compiled for 1.12.4, module version = 1.0.0
[ 15.573] ABI class: X.Org Server Extension, version 6.0
[ 15.573] (II) Loading extension XFree86-DRI
[ 15.573] (II) LoadModule: "dri2"
[ 15.573] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.580] (II) Module dri2: vendor="X.Org Foundation"
[ 15.580] compiled for 1.12.4, module version = 1.2.0
[ 15.580] ABI class: X.Org Server Extension, version 6.0
[ 15.580] (II) Loading extension DRI2
[ 15.580] (II) LoadModule: "fglrx"
[ 15.582] (WW) Warning, couldn't open module fglrx
[ 15.582] (II) UnloadModule: "fglrx"
[ 15.582] (II) Unloading fglrx
[ 15.582] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 15.582] (EE) No drivers available.
[ 15.582]
Fatal server error:
[ 15.582] no screens found
[ 15.582]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 15.582] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 15.582] Last edited by wotix (2014-11-15 09:39:25)
Offline
How did you try to install the drivers?
You should use this method:
https://wiki.debian.org/ATIProprietary# … 2Wheezy.22
xorg.conf:
Section "Device"
Identifier "My GPU"
Driver "fglrx"
EndSectionLast edited by Head_on_a_Stick (2014-11-13 20:02:20)
Offline
I think I used something called "smxi" iirc.
I'm troubelling with the very first step
Here's the output of aptitude: (i pressed Y at the end here)
(sorry it's in german)
Paketlisten werden gelesen...
Abhängigkeitsbaum wird aufgebaut....
Statusinformationen werden eingelesen....
Lesen der erweiterten Statusinformationen...
Initialisieren des Paketstatus'...
Lesen der Task-Beschreibungen...
Die folgenden NEUEN Pakete werden zusätzlich installiert:
acpi-support-base{a} acpid{a} fglrx-atieventsd{a} fglrx-driver
fglrx-glx-ia32{a} fglrx-modules-dkms{a} glx-alternative-fglrx{a}
glx-diversions:i386{ab} libc6-i386{ab} libfglrx{a} libfglrx:i386{a}
libfglrx-amdxvba1{a} libfglrx-amdxvba1:i386{a} libgl1-fglrx-glx{a}
libgl1-fglrx-glx:i386{ab} libgl1-fglrx-glx-i386:i386{a}
0 Pakete aktualisiert, 16 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert.
44,3 MB/48,3 MB an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 151 MB zusätzlich belegt sein.
Die folgenden Pakete haben verletzte Abhängigkeiten:
glx-diversions : Kollidiert mit: glx-diversions:i386 aber 0.2.2 soll installiert werden.
glx-diversions:i386 : Kollidiert mit: glx-diversions aber 0.4.2 ist installiert.
libgl1-mesa-glx : Beschädigt: glx-diversions (< 0.4) aber 0.4.2 ist installiert.
Beschädigt: glx-diversions:i386 (< 0.4) aber 0.2.2 soll installiert werden.
libgl1-mesa-glx:i386 : Beschädigt: glx-diversions (< 0.4) aber 0.4.2 ist installiert.
Beschädigt: glx-diversions:i386 (< 0.4) aber 0.2.2 soll installiert werden.
libc6-i386 : Hängt ab von: libc6 (= 2.13-38+deb7u6) aber 2.19-11 ist installiert.
libgl1-fglrx-glx:i386 : Kollidiert mit: fglrx-glx-ia32 aber 1:12-6+point-3 soll installiert werden.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Die folgenden Aktionen werden diese Abhängigkeiten auflösen:
Beibehalten der folgenden Pakete in ihrer aktuellen Version:
1) fglrx-atieventsd [Nicht installiert]
2) fglrx-driver [Nicht installiert]
3) fglrx-glx-ia32 [Nicht installiert]
4) glx-alternative-fglrx [Nicht installiert]
5) glx-diversions:i386 [Nicht installiert]
6) libc6-i386 [Nicht installiert]
7) libfglrx-amdxvba1 [Nicht installiert]
8) libfglrx-amdxvba1:i386 [Nicht installiert]
9) libgl1-fglrx-glx [Nicht installiert]
10) libgl1-fglrx-glx:i386 [Nicht installiert]
11) libgl1-fglrx-glx-i386:i386 [Nicht installiert]
Die folgenden Abhängigkeiten unaufgelöst lassen:
12) fglrx-driver empfiehlt fglrx-glx-ia32
13) fglrx-driver empfiehlt fglrx-atieventsd
14) libfglrx empfiehlt libfglrx-amdxvba1 (= 1:12-6+point-3)
15) libfglrx:i386 empfiehlt libfglrx-amdxvba1:i386 (= 1:12-6+point-3)
Diese Lösung akzeptieren? [Y/n/q/?] Es werden keine Pakete installiert, aktualisiert oder entfernt.
0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert.
0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 0 B zusätzlich belegt sein.
Schreiben der erweiterten Statusinformationen...
Paketlisten werden gelesen...
Abhängigkeitsbaum wird aufgebaut....
Statusinformationen werden eingelesen....
Lesen der erweiterten Statusinformationen...
Initialisieren des Paketstatus'...
Lesen der Task-Beschreibungen...pressing "n" results in ridicilous suggestions:
Paketlisten werden gelesen...
Abhängigkeitsbaum wird aufgebaut....
Statusinformationen werden eingelesen....
Lesen der erweiterten Statusinformationen...
Initialisieren des Paketstatus'...
Lesen der Task-Beschreibungen...
Die folgenden NEUEN Pakete werden zusätzlich installiert:
acpi-support-base{a} acpid{a} fglrx-atieventsd{a} fglrx-driver
fglrx-glx-ia32{a} fglrx-modules-dkms{a} glx-alternative-fglrx{a}
glx-diversions:i386{ab} libc6-i386{ab} libfglrx{a} libfglrx:i386{a}
libfglrx-amdxvba1{a} libfglrx-amdxvba1:i386{a} libgl1-fglrx-glx{a}
libgl1-fglrx-glx:i386{ab} libgl1-fglrx-glx-i386:i386{a}
0 Pakete aktualisiert, 16 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert.
44,3 MB/48,3 MB an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 151 MB zusätzlich belegt sein.
Die folgenden Pakete haben verletzte Abhängigkeiten:
glx-diversions : Kollidiert mit: glx-diversions:i386 aber 0.2.2 soll installiert werden.
glx-diversions:i386 : Kollidiert mit: glx-diversions aber 0.4.2 ist installiert.
libgl1-mesa-glx : Beschädigt: glx-diversions (< 0.4) aber 0.4.2 ist installiert.
Beschädigt: glx-diversions:i386 (< 0.4) aber 0.2.2 soll installiert werden.
libgl1-mesa-glx:i386 : Beschädigt: glx-diversions (< 0.4) aber 0.4.2 ist installiert.
Beschädigt: glx-diversions:i386 (< 0.4) aber 0.2.2 soll installiert werden.
libc6-i386 : Hängt ab von: libc6 (= 2.13-38+deb7u6) aber 2.19-11 ist installiert.
libgl1-fglrx-glx:i386 : Kollidiert mit: fglrx-glx-ia32 aber 1:12-6+point-3 soll installiert werden.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Die folgenden Aktionen werden diese Abhängigkeiten auflösen:
Beibehalten der folgenden Pakete in ihrer aktuellen Version:
1) fglrx-atieventsd [Nicht installiert]
2) fglrx-driver [Nicht installiert]
3) fglrx-glx-ia32 [Nicht installiert]
4) glx-alternative-fglrx [Nicht installiert]
5) glx-diversions:i386 [Nicht installiert]
6) libc6-i386 [Nicht installiert]
7) libfglrx-amdxvba1 [Nicht installiert]
8) libfglrx-amdxvba1:i386 [Nicht installiert]
9) libgl1-fglrx-glx [Nicht installiert]
10) libgl1-fglrx-glx:i386 [Nicht installiert]
11) libgl1-fglrx-glx-i386:i386 [Nicht installiert]
Die folgenden Abhängigkeiten unaufgelöst lassen:
12) fglrx-driver empfiehlt fglrx-glx-ia32
13) fglrx-driver empfiehlt fglrx-atieventsd
14) libfglrx empfiehlt libfglrx-amdxvba1 (= 1:12-6+point-3)
15) libfglrx:i386 empfiehlt libfglrx-amdxvba1:i386 (= 1:12-6+point-3)
Diese Lösung akzeptieren? [Y/n/q/?] Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Die folgenden Aktionen werden diese Abhängigkeiten auflösen:
Entfernen der folgenden Pakete:
1) 0ad
2) audacity
3) cb-lock
4) cb-meta-printer-support
5) cb-pipemenus
6) cb-welcome
7) compton-git
8) geany-plugin-webhelper
9) geany-plugins
10) gimp
11) gimp-gmic
12) gimp-plugin-registry
13) glx-alternative-mesa
14) glx-alternative-nvidia
15) glx-diversions
16) gvfs
17) gvfs-daemons
18) gvfs-fuse
19) icedtea-7-plugin
20) libbonoboui2-0
21) libgl1-mesa-glx
22) libgl1-mesa-glx:i386
23) libgle3
24) libglew1.7
25) libglu1-mesa
26) libglu1-mesa:i386
27) libglx-nvidia-alternatives
28) libgnome2-0
29) libgnomeui-0
30) libgtkglext1
31) libqt4-gui
32) libqt4-opengl
33) libqt4-opengl:i386
34) libqtwebkit4
35) libqtwebkit4:i386
36) libvisual-0.4-plugins
37) libwebkitgtk-1.0-0
38) libwebkitgtk-3.0-0
39) libwine
40) libwine:i386
41) libwxgtk2.8-0
42) mesa-utils
43) midori
44) obapps
45) openjdk-7-jre
46) playonlinux
47) python-gnome2
48) python-wxgtk2.8
49) python-wxtools
50) scrabble3d
51) skype:i386
52) steam-debian
53) system-config-printer
54) vlc
55) vlc-plugin-vlsub
56) wine
57) wine32:i386
58) wine64
59) winetricks
60) x11-utils
61) xscreensaver-gl
62) xscreensaver-gl-extra
63) zenity
Beibehalten der folgenden Pakete in ihrer aktuellen Version:
64) fglrx-atieventsd [Nicht installiert]
65) fglrx-driver [Nicht installiert]
66) fglrx-glx-ia32 [Nicht installiert]
67) glx-alternative-fglrx [Nicht installiert]
68) libc6-i386 [Nicht installiert]
69) libfglrx-amdxvba1 [Nicht installiert]
70) libfglrx-amdxvba1:i386 [Nicht installiert]
71) libgl1-fglrx-glx [Nicht installiert]
72) libgl1-fglrx-glx:i386 [Nicht installiert]
73) libgl1-fglrx-glx-i386:i386 [Nicht installiert]
Die folgenden Abhängigkeiten unaufgelöst lassen:
74) cb-metapackage empfiehlt obapps
75) cb-metapackage empfiehlt compton-git
76) cb-metapackage empfiehlt cb-pipemenus
77) cb-metapackage empfiehlt cb-lock
78) cb-metapackage empfiehlt cb-welcome
79) cb-metapackage empfiehlt gvfs-fuse
80) cb-metapackage empfiehlt zenity
81) cb-metapackage empfiehlt vlc
82) cb-metapackage empfiehlt geany-plugins
83) cb-metapackage empfiehlt gimp
84) cb-metapackage empfiehlt gimp-plugin-registry
85) terminator empfiehlt python-gnome2
86) thunar empfiehlt gvfs
87) audacity-data empfiehlt audacity
88) evince empfiehlt gvfs
89) file-roller empfiehlt gvfs
90) gimp-data empfiehlt gimp
91) gvfs-common empfiehlt gvfs
92) libvisual-0.4-0 empfiehlt libvisual-0.4-plugins
93) xdg-utils empfiehlt x11-utils
94) xterm empfiehlt x11-utils
95) winetricks empfiehlt zenity | kdebase-bin
96) fglrx-driver empfiehlt fglrx-glx-ia32
97) fglrx-driver empfiehlt fglrx-atieventsd
98) libfglrx empfiehlt libfglrx-amdxvba1 (= 1:12-6+point-3)
99) glx-diversions:i386 empfiehlt glx-alternative-mesa:i386
100) libfglrx:i386 empfiehlt libfglrx-amdxvba1:i386 (= 1:12-6+point-3)
Diese Lösung akzeptieren? [Y/n/q/?] Alle Anstrengungen, diese Abhängigkeiten aufzulösen, aufgegeben.
Abbruch.Offline
Try this instead & post the output:
sudo LC_ALL=C aptitude -r install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') fglrx-driverEDIT: Also, post the output of:
apt-cache policyLast edited by Head_on_a_Stick (2014-11-13 20:56:41)
Offline
btw, after smxi didnt work, i used some other guide but idk which one....
here the output:
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Reading task descriptions...
The following NEW packages will be installed:
acpi-support-base{a} acpid{a} fglrx-atieventsd{a} fglrx-driver
fglrx-glx-ia32{a} fglrx-modules-dkms{a} glx-alternative-fglrx{a}
glx-diversions:i386{ab} libc6-i386{ab} libfglrx{a} libfglrx:i386{a}
libfglrx-amdxvba1{a} libfglrx-amdxvba1:i386{a} libgl1-fglrx-glx{a}
libgl1-fglrx-glx:i386{ab} libgl1-fglrx-glx-i386:i386{a}
0 packages upgraded, 16 newly installed, 0 to remove and 0 not upgraded.
Need to get 44.3 MB/48.3 MB of archives. After unpacking 151 MB will be used.
The following packages have unmet dependencies:
glx-diversions : Conflicts: glx-diversions:i386 but 0.2.2 is to be installed.
glx-diversions:i386 : Conflicts: glx-diversions but 0.4.2 is installed.
libgl1-mesa-glx : Breaks: glx-diversions (< 0.4) but 0.4.2 is installed.
Breaks: glx-diversions:i386 (< 0.4) but 0.2.2 is to be installed.
libgl1-mesa-glx:i386 : Breaks: glx-diversions (< 0.4) but 0.4.2 is installed.
Breaks: glx-diversions:i386 (< 0.4) but 0.2.2 is to be installed.
libc6-i386 : Depends: libc6 (= 2.13-38+deb7u6) but 2.19-11 is installed.
libgl1-fglrx-glx:i386 : Conflicts: fglrx-glx-ia32 but 1:12-6+point-3 is to be installed.
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) fglrx-atieventsd [Not Installed]
2) fglrx-driver [Not Installed]
3) fglrx-glx-ia32 [Not Installed]
4) glx-alternative-fglrx [Not Installed]
5) glx-diversions:i386 [Not Installed]
6) libc6-i386 [Not Installed]
7) libfglrx-amdxvba1 [Not Installed]
8) libfglrx-amdxvba1:i386 [Not Installed]
9) libgl1-fglrx-glx [Not Installed]
10) libgl1-fglrx-glx:i386 [Not Installed]
11) libgl1-fglrx-glx-i386:i386 [Not Installed]
Leave the following dependencies unresolved:
12) fglrx-driver recommends fglrx-glx-ia32
13) fglrx-driver recommends fglrx-atieventsd
14) libfglrx recommends libfglrx-amdxvba1 (= 1:12-6+point-3)
15) libfglrx:i386 recommends libfglrx-amdxvba1:i386 (= 1:12-6+point-3)
Accept this solution? [Y/n/q/?] No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
Writing extended state information...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Reading task descriptions...apt-cache policy
Paketdateien:
100 /var/lib/dpkg/status
release a=now
500 http://repository.violetsky.ch/steam/ wheezy/main i386 Packages
release o=Dimitri Nüscheler,n=wheezy,l=Steam,c=main
origin repository.violetsky.ch
500 http://repository.violetsky.ch/steam/ wheezy/main amd64 Packages
release o=Dimitri Nüscheler,n=wheezy,l=Steam,c=main
origin repository.violetsky.ch
500 http://repo.steampowered.com/steam/ precise/steam i386 Packages
release o=Valve Software LLC,n=precise,l=Steam,c=steam
origin repo.steampowered.com
500 http://repo.steampowered.com/steam/ precise/steam amd64 Packages
release o=Valve Software LLC,n=precise,l=Steam,c=steam
origin repo.steampowered.com
500 http://dl.google.com/linux/talkplugin/deb/ stable/main i386 Packages
release v=1.0,o=Google, Inc.,a=stable,n=stable,l=Google,c=main
origin dl.google.com
500 http://dl.google.com/linux/talkplugin/deb/ stable/main amd64 Packages
release v=1.0,o=Google, Inc.,a=stable,n=stable,l=Google,c=main
origin dl.google.com
500 http://ftp.cz.debian.org/debian/ testing/non-free Translation-en
500 http://ftp.cz.debian.org/debian/ testing/main Translation-en
500 http://ftp.cz.debian.org/debian/ testing/main Translation-de_DE
500 http://ftp.cz.debian.org/debian/ testing/main Translation-de
500 http://ftp.cz.debian.org/debian/ testing/contrib Translation-en
50 http://ftp.cz.debian.org/debian/ testing/non-free i386 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=non-free
origin ftp.cz.debian.org
50 http://ftp.cz.debian.org/debian/ testing/contrib i386 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=contrib
origin ftp.cz.debian.org
50 http://ftp.cz.debian.org/debian/ testing/main i386 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=main
origin ftp.cz.debian.org
50 http://ftp.cz.debian.org/debian/ testing/non-free amd64 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=non-free
origin ftp.cz.debian.org
50 http://ftp.cz.debian.org/debian/ testing/contrib amd64 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=contrib
origin ftp.cz.debian.org
50 http://ftp.cz.debian.org/debian/ testing/main amd64 Packages
release o=Debian,a=testing,n=jessie,l=Debian,c=main
origin ftp.cz.debian.org
500 http://download.opensuse.org/repositories/home:/DarkPlayer:/Pipelight/Debian_7.0/ ./ Packages
release o=obs://build.opensuse.org/home:DarkPlayer:Pipelight/Debian_7.0,n=Debian_7.0,l=home:DarkPlayer:Pipelight,c=
origin download.opensuse.org
500 http://www.duinsoft.nl/pkg/ debs/all i386 Packages
release o=pkg@duinsoft.nl,a=debs,n=debs,l=Duinsoft repository,c=all
origin www.duinsoft.nl
500 http://www.duinsoft.nl/pkg/ debs/all amd64 Packages
release o=pkg@duinsoft.nl,a=debs,n=debs,l=Duinsoft repository,c=all
origin www.duinsoft.nl
500 http://www.deb-multimedia.org/ wheezy/non-free i386 Packages
release o=Unofficial Multimedia Packages,a=stable,n=wheezy,l=Unofficial Multimedia Packages,c=non-free
origin www.deb-multimedia.org
500 http://www.deb-multimedia.org/ wheezy/main i386 Packages
release o=Unofficial Multimedia Packages,a=stable,n=wheezy,l=Unofficial Multimedia Packages,c=main
origin www.deb-multimedia.org
500 http://www.deb-multimedia.org/ wheezy/non-free amd64 Packages
release o=Unofficial Multimedia Packages,a=stable,n=wheezy,l=Unofficial Multimedia Packages,c=non-free
origin www.deb-multimedia.org
500 http://www.deb-multimedia.org/ wheezy/main amd64 Packages
release o=Unofficial Multimedia Packages,a=stable,n=wheezy,l=Unofficial Multimedia Packages,c=main
origin www.deb-multimedia.org
500 http://security.debian.org/ wheezy/updates/non-free Translation-en
500 http://security.debian.org/ wheezy/updates/main Translation-en
500 http://security.debian.org/ wheezy/updates/contrib Translation-en
500 http://security.debian.org/ wheezy/updates/non-free i386 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=non-free
origin security.debian.org
500 http://security.debian.org/ wheezy/updates/contrib i386 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=contrib
origin security.debian.org
500 http://security.debian.org/ wheezy/updates/main i386 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=main
origin security.debian.org
500 http://security.debian.org/ wheezy/updates/non-free amd64 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=non-free
origin security.debian.org
500 http://security.debian.org/ wheezy/updates/contrib amd64 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=contrib
origin security.debian.org
500 http://security.debian.org/ wheezy/updates/main amd64 Packages
release v=7.0,o=Debian,a=stable,n=wheezy,l=Debian-Security,c=main
origin security.debian.org
500 http://ftp.de.debian.org/debian/ stable/non-free Translation-en
500 http://ftp.de.debian.org/debian/ stable/main Translation-en
500 http://ftp.de.debian.org/debian/ stable/main Translation-de_DE
500 http://ftp.de.debian.org/debian/ stable/main Translation-de
500 http://ftp.de.debian.org/debian/ stable/contrib Translation-en
500 http://ftp.de.debian.org/debian/ stable/non-free i386 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=non-free
origin ftp.de.debian.org
500 http://ftp.de.debian.org/debian/ stable/contrib i386 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=contrib
origin ftp.de.debian.org
500 http://ftp.de.debian.org/debian/ stable/main i386 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=main
origin ftp.de.debian.org
500 http://ftp.de.debian.org/debian/ stable/non-free amd64 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=non-free
origin ftp.de.debian.org
500 http://ftp.de.debian.org/debian/ stable/contrib amd64 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=contrib
origin ftp.de.debian.org
500 http://ftp.de.debian.org/debian/ stable/main amd64 Packages
release v=7.7,o=Debian,a=stable,n=wheezy,l=Debian,c=main
origin ftp.de.debian.org
990 http://packages.crunchbang.org/waldorf/ waldorf/main i386 Packages
release o=CrunchBang,a=waldorf,n=waldorf,l=CrunchBang,c=main
origin packages.crunchbang.org
990 http://packages.crunchbang.org/waldorf/ waldorf/main amd64 Packages
release o=CrunchBang,a=waldorf,n=waldorf,l=CrunchBang,c=main
origin packages.crunchbang.org
Mit Pinning verwaltete Pakete:Offline
I'm sorry, but I think you will have to re-install your system 
Debian Testing/Unstable sources break CrunchBang.
Offline
Damn it
I bet i followed a wrong guide.... maybe for debian or something...
well, so i am going to backup /etc (of course without sources.list, that should fix it, right?) and /home and reinstall.. thx for your help anyway
Last edited by wotix (2014-11-13 21:43:59)
Offline
Please check here first before following random guides -- some are written with malicious intent.
Offline
^ And some are well-intentioned, but the writer doesn't really know what they're talking about.
@wotix: Edit your original post and change the title to: [SOLVED] Desktop doesn't start after trying to install proprietary drivers
Also, why did you use smxi to attempt to install the drivers? It's not that difficult to install the proprietary AMD/ATI video drivers. I can send you my personal how-to on installing a proprietary AMD/ATI video driver, but you may need to modify the procedure as I'm using a legacy GPU. Send me a PM if you're interested.
DAH | Linux Format | Linux Journal | Linux User & Developer | Linux Voice | LXer | PGLCESC
Offline
Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.