SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

Pages: 1

#1 2013-05-10 18:24:47

gregkwaste
Member
Registered: 2012-01-25
Posts: 25

Second Gpu not detected

Hi there folks.

I needed a linux distro on my desktop, and after almost 2 years of running #! on my netbook, that had to be the best choice.
The point is that the desktop has SLI. Two quite old GPU's (Nvidia GTX 260)  that overheat on idle (they are too old). On windows i have an application that controls the fan speeds so i keep the temps low. I can't express how MAJOR it is that i can control the fan speeds while running on linux. I saw somewhere that i can manage to do it with nvidia settings,but:

The problem is that nvidia settings can't detect the second gpu.....
It detects the first one that that's all.....

lspci| grep VGA prints both gpus...

i added the device manually in xorg.conf and after a reboot ia managed to see it in nvidia-settings. After a second reboot, without changing ANYTHING, it simply dissapeared and never came back....

I tried to install every nvidia driver possible, and i ended up FUCKING the system up, because of the MOST STUPID DRIVER INSTALLER THAT EXISTS ON THE PLANET... And that is Nvidia's driver installer for linux....

nvidia-installer-autoclean is stuck now... i can't do absolutely anything.... And propably i'll immediately reinstall the distro.

So please, if anyone has to propose anything for the second gpu detenction, please help ^^.

Offline

Help fund CrunchBang, donate to the project!

#2 2013-05-10 19:21:02

damo
#! gimpbanger
From: N51.5 W002.8 (mostly)
Registered: 2011-11-24
Posts: 4,441

Re: Second Gpu not detected

Have you tried sgfxi in the smxi scripts? That sorted all my nvidia installation problems - sweet and easy to use

Artwork at deviantArt;  Iceweasel Personas;  SLiM #! Themes;  Openbox themes

Online

#3 2013-05-10 19:43:27

gregkwaste
Member
Registered: 2012-01-25
Posts: 25

Re: Second Gpu not detected

damo wrote:

Have you tried sgfxi in the smxi scripts? That sorted all my nvidia installation problems - sweet and easy to use


i don't even know about them. What are they and where can i find them yikes

Offline

#4 2013-05-10 20:24:14

damo
#! gimpbanger
From: N51.5 W002.8 (mostly)
Registered: 2011-11-24
Posts: 4,441

Re: Second Gpu not detected

Smxi How To

(PS Try the Search facility at the top of the page - most questions have been asked/answered before wink smile )

Artwork at deviantArt;  Iceweasel Personas;  SLiM #! Themes;  Openbox themes

Online

#5 2013-05-11 00:40:37

gregkwaste
Member
Registered: 2012-01-25
Posts: 25

Re: Second Gpu not detected

found it tried it but still the job s not done....

I seriously can't understand what is happening with xorg....


I install the drivers, then i run nvidia-xconfig (sgfxi makes the same thing) and i have a very basic configuration. That configuration creates only ONE device section, so what i should do is to create a SECOND one, with a different name and the correct BusID. When i reboot, i DO see the 2nd gpu on the settings.

Now if i go and add whatever i need in xorg.conf, i simply lose everything.... and not only that. Even if i restore the working configuration, i still don't see the second gpu......

I tried installing another distro, but the same thing happens there too....

Hands Up. I am trying to fix this stupidness the past 10 hours....

Offline

#6 2013-05-11 09:24:42

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: Second Gpu not detected

Post output of 

cat /var/log/Xorg.0.log

Last edited by xaos52 (2013-05-11 09:26:44)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#7 2013-05-11 11:16:10

gregkwaste
Member
Registered: 2012-01-25
Posts: 25

Re: Second Gpu not detected

xaos52 wrote:

Post output of 

cat /var/log/Xorg.0.log

Ok first of all here is the dmesg section:

[    7.678907] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[    7.679031] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 17
[    7.679043] nvidia 0000:04:00.0: setting latency timer to 64
[    7.679051] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[    7.679077] NVRM: The NVIDIA GPU 0000:04:00.0 (PCI ID: 10de:05e2)
[    7.679078] NVRM: installed in this system is not supported by the 319.17
[    7.679079] NVRM: NVIDIA Linux driver release.  Please see 'Appendix
[    7.679080] NVRM: A - Supported NVIDIA GPU Products' in this release's
[    7.679081] NVRM: README, available on the Linux driver download page
[    7.679082] NVRM: at [url=http://www.nvidia.com]www.nvidia.com[/url].
[    7.679095] nvidia: probe of 0000:04:00.0 failed with error -1
[    7.679117] NVRM: The NVIDIA probe routine failed for 1 device(s).
[    7.679119] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  319.17  Thu Apr 25 22:45:49 PDT 2013

Now the whole Xorg.0.log:

[    11.910] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    11.910] X Protocol Version 11, Revision 0
[    11.910] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[    11.910] Current Operating System: Linux crunchbang 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64
[    11.910] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=c3c6dfed-69c6-43eb-ac8a-d3f593658861 ro quiet vmalloc=256M
[    11.910] Build Date: 17 April 2013  10:22:47AM
[    11.910] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[    11.910] Current version of pixman: 0.26.0
[    11.910]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    11.910] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.910] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 11 07:10:00 2013
[    11.934] (==) Using config file: "/etc/X11/xorg.conf"
[    11.934] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.954] (==) ServerLayout "Layout0"
[    11.954] (**) |-->Screen "Screen0" (0)
[    11.954] (**) |   |-->Monitor "Monitor0"
[    11.955] (**) |   |-->Device "Device0"
[    11.955] (**) |-->Input Device "Keyboard0"
[    11.955] (**) |-->Input Device "Mouse0"
[    11.955] (==) Automatically adding devices
[    11.955] (==) Automatically enabling devices
[    12.127] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.127]     Entry deleted from font path.
[    12.133] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    12.133]     Entry deleted from font path.
[    12.133] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    12.133] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.133] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    12.133] (WW) Disabling Keyboard0
[    12.133] (WW) Disabling Mouse0
[    12.133] (II) Loader magic: 0x7f667b810ae0
[    12.133] (II) Module ABI versions:
[    12.133]     X.Org ANSI C Emulation: 0.4
[    12.133]     X.Org Video Driver: 12.1
[    12.133]     X.Org XInput driver : 16.0
[    12.133]     X.Org Server Extension : 6.0
[    12.134] (--) PCI:*(0:3:0:0) 10de:05e2:1043:8291 rev 161, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    12.134] (--) PCI: (0:4:0:0) 10de:05e2:1043:8291 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    12.134] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    12.134] (II) LoadModule: "extmod"
[    12.146] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    12.158] (II) Module extmod: vendor="X.Org Foundation"
[    12.158]     compiled for 1.12.4, module version = 1.0.0
[    12.158]     Module class: X.Org Server Extension
[    12.158]     ABI class: X.Org Server Extension, version 6.0
[    12.158] (II) Loading extension SELinux
[    12.158] (II) Loading extension MIT-SCREEN-SAVER
[    12.158] (II) Loading extension XFree86-VidModeExtension
[    12.158] (II) Loading extension XFree86-DGA
[    12.158] (II) Loading extension DPMS
[    12.158] (II) Loading extension XVideo
[    12.158] (II) Loading extension XVideo-MotionCompensation
[    12.158] (II) Loading extension X-Resource
[    12.159] (II) LoadModule: "dbe"
[    12.159] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    12.159] (II) Module dbe: vendor="X.Org Foundation"
[    12.159]     compiled for 1.12.4, module version = 1.0.0
[    12.159]     Module class: X.Org Server Extension
[    12.159]     ABI class: X.Org Server Extension, version 6.0
[    12.159] (II) Loading extension DOUBLE-BUFFER
[    12.159] (II) LoadModule: "glx"
[    12.159] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.099] (II) Module glx: vendor="NVIDIA Corporation"
[    14.099]     compiled for 4.0.2, module version = 1.0.0
[    14.099]     Module class: X.Org Server Extension
[    14.099] (II) NVIDIA GLX Module  319.17  Thu Apr 25 21:41:50 PDT 2013
[    14.106] (II) Loading extension GLX
[    14.106] (II) LoadModule: "record"
[    14.106] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    14.286] (II) Module record: vendor="X.Org Foundation"
[    14.286]     compiled for 1.12.4, module version = 1.13.0
[    14.286]     Module class: X.Org Server Extension
[    14.286]     ABI class: X.Org Server Extension, version 6.0
[    14.286] (II) Loading extension RECORD
[    14.286] (II) LoadModule: "dri"
[    14.286] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    14.324] (II) Module dri: vendor="X.Org Foundation"
[    14.324]     compiled for 1.12.4, module version = 1.0.0
[    14.324]     ABI class: X.Org Server Extension, version 6.0
[    14.324] (II) Loading extension XFree86-DRI
[    14.324] (II) LoadModule: "dri2"
[    14.325] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    14.353] (II) Module dri2: vendor="X.Org Foundation"
[    14.354]     compiled for 1.12.4, module version = 1.2.0
[    14.354]     ABI class: X.Org Server Extension, version 6.0
[    14.354] (II) Loading extension DRI2
[    14.354] (II) LoadModule: "nvidia"
[    14.354] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    14.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[    14.500]     compiled for 4.0.2, module version = 1.0.0
[    14.500]     Module class: X.Org Video Driver
[    14.549] (II) NVIDIA dlloader X Driver  319.17  Thu Apr 25 21:23:57 PDT 2013
[    14.549] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.555] (++) using VT number 7

[    14.592] (II) Loading sub module "fb"
[    14.593] (II) LoadModule: "fb"
[    14.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.632] (II) Module fb: vendor="X.Org Foundation"
[    14.632]     compiled for 1.12.4, module version = 1.0.0
[    14.632]     ABI class: X.Org ANSI C Emulation, version 0.4
[    14.632] (II) Loading sub module "wfb"
[    14.632] (II) LoadModule: "wfb"
[    14.633] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    14.767] (II) Module wfb: vendor="X.Org Foundation"
[    15.262]     compiled for 1.12.4, module version = 1.0.0
[    15.262]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.262] (II) Loading sub module "shadow"
[    15.262] (II) LoadModule: "shadow"
[    15.262] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    15.353] (II) Module shadow: vendor="X.Org Foundation"
[    15.353]     compiled for 1.12.4, module version = 1.1.0
[    15.353]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.353] (II) Loading sub module "ramdac"
[    15.353] (II) LoadModule: "ramdac"
[    15.353] (II) Module "ramdac" already built-in
[    15.374] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    15.374] (==) NVIDIA(0): RGB weight 888
[    15.374] (==) NVIDIA(0): Default visual is TrueColor
[    15.374] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.374] (**) NVIDIA(0): Enabling 2D acceleration
[    16.784] drmOpenDevice: node name is /dev/dri/card0
[    16.787] drmOpenByBusid: Searching for BusID PCI:3:0:0
[    16.788] drmOpenDevice: node name is /dev/dri/card0
[    16.791] drmOpenByBusid: drmOpenMinor returns -1
[    16.791] drmOpenDevice: node name is /dev/dri/card1
[    16.795] drmOpenByBusid: drmOpenMinor returns -1
[    16.795] drmOpenDevice: node name is /dev/dri/card2
[    16.799] drmOpenByBusid: drmOpenMinor returns -1
[    16.799] drmOpenDevice: node name is /dev/dri/card3
[    16.802] drmOpenByBusid: drmOpenMinor returns -1
[    16.802] drmOpenDevice: node name is /dev/dri/card4
[    16.806] drmOpenByBusid: drmOpenMinor returns -1
[    16.806] drmOpenDevice: node name is /dev/dri/card5
[    16.810] drmOpenByBusid: drmOpenMinor returns -1
[    16.810] drmOpenDevice: node name is /dev/dri/card6
[    16.813] drmOpenByBusid: drmOpenMinor returns -1
[    16.813] drmOpenDevice: node name is /dev/dri/card7
[    16.817] drmOpenByBusid: drmOpenMinor returns -1
[    16.817] drmOpenDevice: node name is /dev/dri/card8
[    16.821] drmOpenByBusid: drmOpenMinor returns -1
[    16.821] drmOpenDevice: node name is /dev/dri/card9
[    16.824] drmOpenByBusid: drmOpenMinor returns -1
[    16.824] drmOpenDevice: node name is /dev/dri/card10
[    16.828] drmOpenByBusid: drmOpenMinor returns -1
[    16.828] drmOpenDevice: node name is /dev/dri/card11
[    16.832] drmOpenByBusid: drmOpenMinor returns -1
[    16.832] drmOpenDevice: node name is /dev/dri/card12
[    16.835] drmOpenByBusid: drmOpenMinor returns -1
[    16.835] drmOpenDevice: node name is /dev/dri/card13
[    16.839] drmOpenByBusid: drmOpenMinor returns -1
[    16.839] drmOpenDevice: node name is /dev/dri/card14
[    16.843] drmOpenByBusid: drmOpenMinor returns -1
[    16.843] drmOpenDevice: node name is /dev/dri/card15
[    16.846] drmOpenByBusid: drmOpenMinor returns -1
[    16.988] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    16.988] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    16.990] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:3:0:0 (GPU-0)
[    16.990] (--) NVIDIA(0): Memory: 917504 kBytes
[    16.990] (--) NVIDIA(0): VideoBIOS: 62.00.0e.00.03
[    16.990] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.993] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 260 at PCI:3:0:0
[    16.993] (--) NVIDIA(0):     CRT-0
[    16.993] (--) NVIDIA(0):     Samsung SyncMaster (CRT-1) (boot, connected)
[    16.993] (--) NVIDIA(0):     TV-0
[    16.993] (--) NVIDIA(0):     DFP-0
[    16.993] (--) NVIDIA(0):     DFP-1
[    16.993] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    16.993] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[    16.993] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    16.993] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    16.993] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    16.993] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[    16.993] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    16.993] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.993] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[    16.993] (**) NVIDIA(0):     has been enabled on all display devices.)
[    16.995] (==) NVIDIA(0): 
[    16.995] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    16.995] (==) NVIDIA(0):     will be used as the requested mode.
[    16.995] (==) NVIDIA(0): 
[    16.995] (II) NVIDIA(0): Validated MetaModes:
[    16.995] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select{}"
[    16.995] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    17.015] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[    17.015] (--) NVIDIA(0):     option
[    17.015] (--) Depth 24 pixmap format is 32 bpp
[    17.015] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    17.018] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    17.018] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    17.018] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    17.018] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    17.018] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    17.018] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    17.018] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    17.018] (II) NVIDIA(0):     Config Options in the README.
[    17.020] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select{}"
[    17.085] (II) Loading extension NV-GLX
[    17.147] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.147] (==) NVIDIA(0): Backing store disabled
[    17.147] (==) NVIDIA(0): Silken mouse enabled
[    17.148] (**) NVIDIA(0): DPMS enabled
[    17.166] (II) Loading extension NV-CONTROL
[    17.166] (II) Loading extension XINERAMA
[    17.167] (WW) NVIDIA(0): Option "Twinview" is not used
[    17.167] (II) Loading sub module "dri2"
[    17.167] (II) LoadModule: "dri2"
[    17.167] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.167] (II) Module dri2: vendor="X.Org Foundation"
[    17.167]     compiled for 1.12.4, module version = 1.2.0
[    17.167]     ABI class: X.Org Server Extension, version 6.0
[    17.167] (II) NVIDIA(0): [DRI2] Setup complete
[    17.167] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.167] (--) RandR disabled
[    17.167] (II) Initializing built-in extension Generic Event Extension
[    17.167] (II) Initializing built-in extension SHAPE
[    17.167] (II) Initializing built-in extension MIT-SHM
[    17.167] (II) Initializing built-in extension XInputExtension
[    17.167] (II) Initializing built-in extension XTEST
[    17.167] (II) Initializing built-in extension BIG-REQUESTS
[    17.167] (II) Initializing built-in extension SYNC
[    17.167] (II) Initializing built-in extension XKEYBOARD
[    17.167] (II) Initializing built-in extension XC-MISC
[    17.167] (II) Initializing built-in extension SECURITY
[    17.167] (II) Initializing built-in extension XINERAMA
[    17.167] (II) Initializing built-in extension XFIXES
[    17.167] (II) Initializing built-in extension RENDER
[    17.167] (II) Initializing built-in extension RANDR
[    17.167] (II) Initializing built-in extension COMPOSITE
[    17.167] (II) Initializing built-in extension DAMAGE
[    17.167] (II) SELinux: Disabled on system
[    17.168] (II) Initializing extension GLX
[    17.559] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    17.559] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.559] (II) LoadModule: "evdev"
[    17.559] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.571] (II) Module evdev: vendor="X.Org Foundation"
[    17.571]     compiled for 1.12.1, module version = 2.7.0
[    17.571]     Module class: X.Org XInput Driver
[    17.571]     ABI class: X.Org XInput driver, version 16.0
[    17.571] (II) Using input driver 'evdev' for 'Power Button'
[    17.571] (**) Power Button: always reports core events
[    17.571] (**) evdev: Power Button: Device: "/dev/input/event5"
[    17.571] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.571] (--) evdev: Power Button: Found keys
[    17.571] (II) evdev: Power Button: Configuring as keyboard
[    17.571] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    17.571] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.571] (**) Option "xkb_rules" "evdev"
[    17.571] (**) Option "xkb_model" "pc105"
[    17.571] (**) Option "xkb_layout" "us"
[    17.572] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    17.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.572] (II) Using input driver 'evdev' for 'Power Button'
[    17.572] (**) Power Button: always reports core events
[    17.572] (**) evdev: Power Button: Device: "/dev/input/event4"
[    17.572] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.572] (--) evdev: Power Button: Found keys
[    17.572] (II) evdev: Power Button: Configuring as keyboard
[    17.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[    17.572] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    17.572] (**) Option "xkb_rules" "evdev"
[    17.572] (**) Option "xkb_model" "pc105"
[    17.572] (**) Option "xkb_layout" "us"
[    17.572] (II) config/udev: Adding input device Razer Razer BlackWidow (/dev/input/event0)
[    17.572] (**) Razer Razer BlackWidow: Applying InputClass "evdev keyboard catchall"
[    17.572] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow'
[    17.572] (**) Razer Razer BlackWidow: always reports core events
[    17.572] (**) evdev: Razer Razer BlackWidow: Device: "/dev/input/event0"
[    17.572] (--) evdev: Razer Razer BlackWidow: Vendor 0x1532 Product 0x10e
[    17.572] (--) evdev: Razer Razer BlackWidow: Found keys
[    17.572] (II) evdev: Razer Razer BlackWidow: Configuring as keyboard
[    17.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb4/4-4/4-4:1.0/input/input0/event0"
[    17.572] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow" (type: KEYBOARD, id 8)
[    17.572] (**) Option "xkb_rules" "evdev"
[    17.572] (**) Option "xkb_model" "pc105"
[    17.573] (**) Option "xkb_layout" "us"
[    17.573] (II) config/udev: Adding input device Razer Razer BlackWidow (/dev/input/event1)
[    17.573] (**) Razer Razer BlackWidow: Applying InputClass "evdev keyboard catchall"
[    17.573] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow'
[    17.573] (**) Razer Razer BlackWidow: always reports core events
[    17.573] (**) evdev: Razer Razer BlackWidow: Device: "/dev/input/event1"
[    17.573] (--) evdev: Razer Razer BlackWidow: Vendor 0x1532 Product 0x10e
[    17.573] (--) evdev: Razer Razer BlackWidow: Found 1 mouse buttons
[    17.573] (--) evdev: Razer Razer BlackWidow: Found scroll wheel(s)
[    17.573] (--) evdev: Razer Razer BlackWidow: Found relative axes
[    17.573] (II) evdev: Razer Razer BlackWidow: Forcing relative x/y axes to exist.
[    17.573] (--) evdev: Razer Razer BlackWidow: Found absolute axes
[    17.573] (II) evdev: Razer Razer BlackWidow: Forcing absolute x/y axes to exist.
[    17.573] (--) evdev: Razer Razer BlackWidow: Found keys
[    17.573] (II) evdev: Razer Razer BlackWidow: Configuring as mouse
[    17.573] (II) evdev: Razer Razer BlackWidow: Configuring as keyboard
[    17.573] (II) evdev: Razer Razer BlackWidow: Adding scrollwheel support
[    17.573] (**) evdev: Razer Razer BlackWidow: YAxisMapping: buttons 4 and 5
[    17.573] (**) evdev: Razer Razer BlackWidow: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb4/4-4/4-4:1.1/input/input1/event1"
[    17.573] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow" (type: KEYBOARD, id 9)
[    17.573] (**) Option "xkb_rules" "evdev"
[    17.573] (**) Option "xkb_model" "pc105"
[    17.573] (**) Option "xkb_layout" "us"
[    17.573] (II) evdev: Razer Razer BlackWidow: initialized for relative axes.
[    17.573] (WW) evdev: Razer Razer BlackWidow: ignoring absolute axes.
[    17.573] (**) Razer Razer BlackWidow: (accel) keeping acceleration scheme 1
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration profile 0
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration factor: 2.000
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration threshold: 4
[    17.574] (II) config/udev: Adding input device Razer Razer BlackWidow (/dev/input/event2)
[    17.574] (**) Razer Razer BlackWidow: Applying InputClass "evdev pointer catchall"
[    17.574] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow'
[    17.574] (**) Razer Razer BlackWidow: always reports core events
[    17.574] (**) evdev: Razer Razer BlackWidow: Device: "/dev/input/event2"
[    17.574] (--) evdev: Razer Razer BlackWidow: Vendor 0x1532 Product 0x10e
[    17.574] (--) evdev: Razer Razer BlackWidow: Found 3 mouse buttons
[    17.574] (--) evdev: Razer Razer BlackWidow: Found scroll wheel(s)
[    17.574] (--) evdev: Razer Razer BlackWidow: Found relative axes
[    17.574] (--) evdev: Razer Razer BlackWidow: Found x and y relative axes
[    17.574] (II) evdev: Razer Razer BlackWidow: Configuring as mouse
[    17.574] (II) evdev: Razer Razer BlackWidow: Adding scrollwheel support
[    17.574] (**) evdev: Razer Razer BlackWidow: YAxisMapping: buttons 4 and 5
[    17.574] (**) evdev: Razer Razer BlackWidow: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb4/4-4/4-4:1.2/input/input2/event2"
[    17.574] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow" (type: MOUSE, id 10)
[    17.574] (II) evdev: Razer Razer BlackWidow: initialized for relative axes.
[    17.574] (**) Razer Razer BlackWidow: (accel) keeping acceleration scheme 1
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration profile 0
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration factor: 2.000
[    17.574] (**) Razer Razer BlackWidow: (accel) acceleration threshold: 4
[    17.574] (II) config/udev: Adding input device Razer Razer BlackWidow (/dev/input/mouse0)
[    17.574] (II) No input driver specified, ignoring this device.
[    17.574] (II) This device may have been added with another device file.
[    17.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event7)
[    17.575] (II) No input driver specified, ignoring this device.
[    17.575] (II) This device may have been added with another device file.
[    17.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js0)
[    17.575] (II) No input driver specified, ignoring this device.
[    17.575] (II) This device may have been added with another device file.
[    17.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event8)
[    17.575] (II) No input driver specified, ignoring this device.
[    17.575] (II) This device may have been added with another device file.
[    17.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js1)
[    17.575] (II) No input driver specified, ignoring this device.
[    17.575] (II) This device may have been added with another device file.
[    17.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event9)
[    17.576] (II) No input driver specified, ignoring this device.
[    17.576] (II) This device may have been added with another device file.
[    17.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js2)
[    17.576] (II) No input driver specified, ignoring this device.
[    17.576] (II) This device may have been added with another device file.
[    17.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/event10)
[    17.576] (II) No input driver specified, ignoring this device.
[    17.576] (II) This device may have been added with another device file.
[    17.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (/dev/input/js3)
[    17.576] (II) No input driver specified, ignoring this device.
[    17.576] (II) This device may have been added with another device file.
[    17.577] (II) config/udev: Adding input device Microsoft Comfort Optical Mouse 1000 (/dev/input/event3)
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: Applying InputClass "evdev pointer catchall"
[    17.577] (II) Using input driver 'evdev' for 'Microsoft Comfort Optical Mouse 1000'
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: always reports core events
[    17.577] (**) evdev: Microsoft Comfort Optical Mouse 1000: Device: "/dev/input/event3"
[    17.577] (--) evdev: Microsoft Comfort Optical Mouse 1000: Vendor 0x45e Product 0xf6
[    17.577] (--) evdev: Microsoft Comfort Optical Mouse 1000: Found 3 mouse buttons
[    17.577] (--) evdev: Microsoft Comfort Optical Mouse 1000: Found scroll wheel(s)
[    17.577] (--) evdev: Microsoft Comfort Optical Mouse 1000: Found relative axes
[    17.577] (--) evdev: Microsoft Comfort Optical Mouse 1000: Found x and y relative axes
[    17.577] (II) evdev: Microsoft Comfort Optical Mouse 1000: Configuring as mouse
[    17.577] (II) evdev: Microsoft Comfort Optical Mouse 1000: Adding scrollwheel support
[    17.577] (**) evdev: Microsoft Comfort Optical Mouse 1000: YAxisMapping: buttons 4 and 5
[    17.577] (**) evdev: Microsoft Comfort Optical Mouse 1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/input/input3/event3"
[    17.577] (II) XINPUT: Adding extended input device "Microsoft Comfort Optical Mouse 1000" (type: MOUSE, id 11)
[    17.577] (II) evdev: Microsoft Comfort Optical Mouse 1000: initialized for relative axes.
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: (accel) keeping acceleration scheme 1
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: (accel) acceleration profile 0
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: (accel) acceleration factor: 2.000
[    17.577] (**) Microsoft Comfort Optical Mouse 1000: (accel) acceleration threshold: 4
[    17.577] (II) config/udev: Adding input device Microsoft Comfort Optical Mouse 1000 (/dev/input/mouse1)
[    17.577] (II) No input driver specified, ignoring this device.
[    17.577] (II) This device may have been added with another device file.
[    17.577] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event11)
[    17.577] (II) No input driver specified, ignoring this device.
[    17.577] (II) This device may have been added with another device file.
[    17.578] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    17.578] (II) No input driver specified, ignoring this device.
[    17.578] (II) This device may have been added with another device file.
[    26.047] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    26.047] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    26.047] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.047] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[    26.047] (**) NVIDIA(0):     has been enabled on all display devices.)
[    26.131] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    26.131] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    26.131] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.131] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[    26.131] (**) NVIDIA(0):     has been enabled on all display devices.)

Last edited by gregkwaste (2013-05-11 12:22:43)

Offline

#8 2013-05-11 12:15:34

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: Second Gpu not detected

Try  the 310.51 driver from this page

PS: update your previous post. Put the info between ' code ' tags please.

Last edited by xaos52 (2013-05-11 12:16:26)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#9 2013-05-11 12:46:06

gregkwaste
Member
Registered: 2012-01-25
Posts: 25

Re: Second Gpu not detected

i just installed the drivers, after uninstalling the previous ones, and now not even nvidia module cannot be modprobed....

EDIT: After a 3rd reboot the module loaded. I saw both cards on nvidia-settings. i INSTANTLY rebooted. And the card is gone again........................

Dmesg prints again the initial output....

Last edited by gregkwaste (2013-05-11 12:51:45)

Offline

#10 2013-09-05 20:43:56

cup_of_squirrel
#! CrunchBanger
From: New York City
Registered: 2013-08-29
Posts: 141

Re: Second Gpu not detected

EDIT: Nevermind. It's a similar issue, but not quite the same. lspci detects second GPU but it isn't initialized. However dmesg doesn't say anything about "NVRM: installed in this system is not supported by the 319.17", which seems like the driver not supporting your card. Anyway, I kept the rest of my post in case you want to give it a try.

Having the same issue. Looked around and found this on Arch Wiki. Apparently, either setting your vmalloc higher in grub2, disabling IOMMU in your bios or changing your bios IRQ routing can fix this.

Unfortunately neither vmalloc solution nor IOMMU solution (don't have that setting in my bios) worked for me. Going to try bios IRQ whenever I have time. Will post the results here.

Last edited by cup_of_squirrel (2013-09-05 21:01:10)

Offline

Pages: 1

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo