SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 2013-03-20 23:46:15

Larsantos
Member
Registered: 2012-04-17
Posts: 15

Intel GMA500 Driver problems - #! Resolution

Hello,

I have installed #! on a Toshiba NB-510 that has the Intel GMA500 GPU and I can only get the 800x600 resolution, which makes using the netbook very hard on some internet sites and/or apps.

I've read and tried some solutions but without success, some point to changing xorg.conf or xorg.conf.d or adding options to the booting but I'm unable to find those files and I have no clue how to change option at boot time, as I'm a newbie I've already broke my netbook twice trying to figure it out, without success, obviously...

Any help at this time will be much appreciated, I know that Fedora 18 works alright with this netbook on 1024x600 resolution but I love #! and didn't want to change.

I'm not sure if is of any help but I'll put here the output of some commands I've seen in some posts on forums about Linux:

uname -a

Linux NB510 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686 GNU/Linux

lspci

00:00.0 Host bridge: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 10)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)

lsmod

Module                  Size  Used by
fuse                   52184  3 
cryptd                 14125  0 
aes_i586               16647  1 
aes_generic            32970  1 aes_i586
parport_pc             22036  0 
ppdev                  12651  0 
lp                     12797  0 
parport                31254  3 lp,ppdev,parport_pc
bnep                   17288  2 
rfcomm                 28626  0 
bluetooth             103791  10 rfcomm,bnep
cpufreq_userspace      12520  0 
cpufreq_powersave      12422  0 
cpufreq_conservative    12987  0 
cpufreq_stats          12762  0 
loop                   17810  0 
arc4                   12418  2 
uvcvideo               56896  0 
videodev               61658  1 uvcvideo
media                  13692  2 videodev,uvcvideo
snd_hda_codec_realtek   142274  1 
snd_hda_codec_hdmi     26352  1 
joydev                 17010  0 
rtl8192ce              56076  0 
snd_hda_intel          21786  2 
rtlwifi                71765  1 rtl8192ce
snd_hda_codec          63477  3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
rtl8192c_common        43842  1 rtl8192ce
snd_hwdep              12943  1 snd_hda_codec
mac80211              171389  3 rtl8192c_common,rtlwifi,rtl8192ce
snd_pcm                53461  3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc         12867  2 snd_pcm,snd_hda_intel
cfg80211              117541  2 mac80211,rtlwifi
snd_seq                39512  0 
snd_seq_device         13016  1 snd_seq
snd_timer              22356  2 snd_seq,snd_pcm
snd                    42722  13 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
rfkill                 18516  4 cfg80211,bluetooth
soundcore              12921  1 snd
psmouse                54961  0 
pcspkr                 12515  0 
acpi_cpufreq           12807  1 
mperf                  12421  1 acpi_cpufreq
evdev                  17225  7 
iTCO_wdt               16945  0 
serio_raw              12803  0 
iTCO_vendor_support    12632  1 iTCO_wdt
i2c_i801               12670  0 
i2c_core               19116  2 i2c_i801,videodev
battery                12986  0 
coretemp               12770  0 
ac                     12552  0 
power_supply           13283  2 ac,battery
video                  17459  0 
processor              27565  5 acpi_cpufreq
button                 12817  0 
ext4                  306912  2 
crc16                  12327  2 ext4,bluetooth
jbd2                   52288  1 ext4
mbcache                12938  1 ext4
usbhid                 31554  0 
hid                    60152  1 usbhid
microcode              17558  0 
ums_realtek            13012  0 
usb_storage            35137  1 ums_realtek
sg                     21476  0 
sd_mod                 35425  4 
crc_t10dif             12332  1 sd_mod
ahci                   20821  3 
libahci                18308  1 ahci
libata                125014  2 libahci,ahci
scsi_mod              135037  4 libata,sd_mod,sg,usb_storage
fan                    12594  0 
uhci_hcd               22337  0 
thermal                13103  0 
thermal_sys            17752  4 thermal,fan,processor,video
alx                    59294  0 
ehci_hcd               35509  0 
usbcore               104555  8 ehci_hcd,uhci_hcd,usbhid,usb_storage,ums_realtek,rtlwifi,uvcvideo
usb_common             12338  1 usbcore

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003edf4000 (usable)
[    0.000000]  BIOS-e820: 000000003edf4000 - 000000003f0fd000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f0fd000 - 000000003f52f000 (usable)
[    0.000000]  BIOS-e820: 000000003f52f000 - 000000003f5af000 (reserved)
[    0.000000]  BIOS-e820: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6af000 - 000000003f6ef000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f6ef000 - 000000003f6f0000 (usable)
[    0.000000]  BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: TOSHIBA TOSHIBA NB510/Portable PC, BIOS 1.30 4/3/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask FE0000000 write-back
[    0.000000]   2 base 020000000 mask FE0000000 write-back
[    0.000000]   3 base 03F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 base 03F6F0000 mask FFFFF0000 uncachable
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00fe250] fe250
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 36c02000 - 375f9000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 TOSINV)
[    0.000000] ACPI: XSDT 3f6ee120 00084 (v01 TOSINV TOSINV00 00000001      01000013)
[    0.000000] ACPI: FACP 3f6ec000 000F4 (v04 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 3f6e3000 04EF7 (v02 TOSINV TOSINV00 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 3f670000 00040
[    0.000000] ACPI: UEFI 3f6ed000 00236 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 3f6eb000 00038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 3f6ea000 00078 (v02 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 3f6e9000 0003C (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: WDRT 3f6e8000 00047 (v01 TOSINV TOSINV00 00000000 ACPI 00040000)
[    0.000000] ACPI: SLIC 3f6e2000 00176 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 3f6e1000 00028 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 3f6dd000 03DB5 (v01 TOSINV   TsbOdm 00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 3f6dc000 00655 (v01 INSYDE CPLCRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 3f6db000 00259 (v01 INSYDE CPLCRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 3f6da000 0020F (v01 INSYDE CPLCRB   00003000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 124MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0003f6f0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0003edf4
[    0.000000]     0: 0x0003f0fd -> 0x0003f52f
[    0.000000]     0: 0x0003f6ef -> 0x0003f6f0
[    0.000000] On node 0 totalpages: 258485
[    0.000000] free_area_init_node: node 0, pgdat c1412680, node_mem_map f6412200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 250 pages used for memmap
[    0.000000]   HighMem zone: 30511 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79be000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256455
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=088ba4fd-eee3-49b9-ae65-1e1cf9d1a8ba ro quiet acpi_osi=Linux
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f6f0)
[    0.000000] Memory: 1009328k/1039296k available (2847k kernel code, 24612k reserved, 1352k data, 416k init, 123044k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141a000 - 0xc1482000   ( 416 kB)
[    0.000000]       .data : 0xc12c7d40 - 0xc1419fc0   (1352 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c7d40   (2847 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1595.938 MHz processor.
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.87 BogoMIPS (lpj=6383752)
[    0.000015] pid_max: default: 32768 minimum: 301
[    0.000107] Security Framework initialized
[    0.000116] AppArmor: AppArmor disabled by boot time parameter
[    0.000154] Mount-cache hash table entries: 512
[    0.000401] Initializing cgroup subsys cpuacct
[    0.000415] Initializing cgroup subsys memory
[    0.000432] Initializing cgroup subsys devices
[    0.000438] Initializing cgroup subsys freezer
[    0.000443] Initializing cgroup subsys net_cls
[    0.000448] Initializing cgroup subsys blkio
[    0.000462] Initializing cgroup subsys perf_event
[    0.000519] CPU: Physical Processor ID: 0
[    0.000523] CPU: Processor Core ID: 0
[    0.000529] mce: CPU supports 5 MCE banks
[    0.000541] CPU0: Thermal monitoring handled by SMI
[    0.000548] using mwait in idle threads.
[    0.001104] ACPI: Core revision 20110623
[    0.031853] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032294] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071945] CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
[    0.178476] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
[    0.178491] ... version:                3
[    0.178495] ... bit width:              40
[    0.178499] ... generic registers:      2
[    0.178503] ... value mask:             000000ffffffffff
[    0.178508] ... max period:             000000007fffffff
[    0.178512] ... fixed-purpose events:   3
[    0.178516] ... event mask:             0000000700000003
[    0.178931] NMI watchdog enabled, takes one hw-pmu counter.
[    0.179302] CPU 1 irqstacks, hard=f60d4000 soft=f60d6000
[    0.179308] Booting Node   0, Processors  #1
[    0.179314] smpboot cpu 1: start_ip = 9a000
[    0.189361] Initializing CPU#1
[    0.266415] CPU1: Thermal monitoring handled by SMI
[    0.286544] NMI watchdog enabled, takes one hw-pmu counter.
[    0.286835] CPU 2 irqstacks, hard=f6104000 soft=f6106000
[    0.286840]  #2
[    0.286844] smpboot cpu 2: start_ip = 9a000
[    0.296799] Initializing CPU#2
[    0.374307] CPU2: Thermal monitoring handled by SMI
[    0.394443] NMI watchdog enabled, takes one hw-pmu counter.
[    0.394698] CPU 3 irqstacks, hard=f6116000 soft=f6118000
[    0.394703]  #3 Ok.
[    0.394707] smpboot cpu 3: start_ip = 9a000
[    0.404663] Initializing CPU#3
[    0.482203] CPU3: Thermal monitoring handled by SMI
[    0.502305] NMI watchdog enabled, takes one hw-pmu counter.
[    0.502360] Brought up 4 CPUs
[    0.502370] Total of 4 processors activated (12767.82 BogoMIPS).
[    0.503761] devtmpfs: initialized
[    0.504222] PM: Registering ACPI NVS region at 3edf4000 (3182592 bytes)
[    0.504413] PM: Registering ACPI NVS region at 3f5af000 (1048576 bytes)
[    0.504853] print_constraints: dummy: 
[    0.505002] NET: Registered protocol family 16
[    0.505233] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.505240] ACPI: bus type pci registered
[    0.505412] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.505421] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.505426] PCI: Using MMCONFIG for extended config space
[    0.505431] PCI: Using configuration type 1 for base access
[    0.507460] bio: create slab <bio-0> at 0
[    0.507783] ACPI: Added _OSI(Module Device)
[    0.507790] ACPI: Added _OSI(Processor Device)
[    0.507795] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.507801] ACPI: Added _OSI(Processor Aggregator Device)
[    0.507807] ACPI: Added _OSI(Linux)
[    0.510931] ACPI: EC: Look up EC in DSDT
[    0.514363] ACPI: Executed 1 blocks of module-level executable AML code
[    0.562226] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[    0.590732] ACPI: SSDT 3f566a90 002F5 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.591527] ACPI: Dynamic OEM Table Load:
[    0.591535] ACPI: SSDT   (null) 002F5 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.591922] ACPI: SSDT 3f565710 006D5 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.592691] ACPI: Dynamic OEM Table Load:
[    0.592698] ACPI: SSDT   (null) 006D5 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.614846] ACPI: SSDT 3f566e10 001CF (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.615687] ACPI: Dynamic OEM Table Load:
[    0.615695] ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.626357] ACPI: SSDT 3f567f10 0008D (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.627135] ACPI: Dynamic OEM Table Load:
[    0.627143] ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.639678] ACPI: Interpreter enabled
[    0.639691] ACPI: (supports S0 S3 S4 S5)
[    0.639741] ACPI: Using IOAPIC for interrupt routing
[    0.658055] ACPI: Power Resource [FN00] (on)
[    0.659175] ACPI: No dock devices found.
[    0.659181] HEST: Table not found.
[    0.659191] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.659725] \_SB_.PCI0:_OSC invalid UUID
[    0.659730] _OSC request data:1 8 1f 
[    0.659742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.660460] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.660468] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.660475] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.660482] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.660489] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[    0.660495] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[    0.660502] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0x3fffffff]
[    0.660509] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.660543] pci 0000:00:00.0: [8086:0bf1] type 0 class 0x000600
[    0.660618] pci 0000:00:02.0: [8086:0be1] type 0 class 0x000300
[    0.660639] pci 0000:00:02.0: reg 10: [mem 0x44000000-0x440fffff]
[    0.660650] pci 0000:00:02.0: reg 14: [io  0x40d0-0x40d7]
[    0.660775] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.660801] pci 0000:00:1b.0: reg 10: [mem 0x44100000-0x44103fff 64bit]
[    0.660907] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.660949] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.661067] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.661108] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.661222] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.661268] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.661343] pci 0000:00:1d.0: reg 20: [io  0x40a0-0x40bf]
[    0.661406] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.661479] pci 0000:00:1d.1: reg 20: [io  0x4080-0x409f]
[    0.661541] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.661614] pci 0000:00:1d.2: reg 20: [io  0x4060-0x407f]
[    0.661674] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.661749] pci 0000:00:1d.3: reg 20: [io  0x4040-0x405f]
[    0.661826] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.661856] pci 0000:00:1d.7: reg 10: [mem 0x44105000-0x441053ff]
[    0.661984] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.662040] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.662145] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[    0.662335] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[    0.662362] pci 0000:00:1f.2: reg 10: [io  0x40c8-0x40cf]
[    0.662378] pci 0000:00:1f.2: reg 14: [io  0x40dc-0x40df]
[    0.662393] pci 0000:00:1f.2: reg 18: [io  0x40c0-0x40c7]
[    0.662408] pci 0000:00:1f.2: reg 1c: [io  0x40d8-0x40db]
[    0.662423] pci 0000:00:1f.2: reg 20: [io  0x4020-0x402f]
[    0.662439] pci 0000:00:1f.2: reg 24: [mem 0x44104000-0x441043ff]
[    0.662497] pci 0000:00:1f.2: PME# supported from D3hot
[    0.662528] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.662598] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.662734] pci 0000:01:00.0: [1969:1090] type 0 class 0x000200
[    0.662769] pci 0000:01:00.0: reg 10: [mem 0x43000000-0x4303ffff 64bit]
[    0.662789] pci 0000:01:00.0: reg 18: [io  0x3000-0x307f]
[    0.662930] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.670066] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.670092] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.670102] pci 0000:00:1c.0:   bridge window [mem 0x43000000-0x43ffffff]
[    0.670115] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[    0.670240] pci 0000:02:00.0: [10ec:8176] type 0 class 0x000280
[    0.670269] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.670313] pci 0000:02:00.0: reg 18: [mem 0x42000000-0x42003fff 64bit]
[    0.670438] pci 0000:02:00.0: supports D1 D2
[    0.670444] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.678056] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.678083] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.678092] pci 0000:00:1c.1:   bridge window [mem 0x42000000-0x42ffffff]
[    0.678105] pci 0000:00:1c.1:   bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[    0.678229] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.678248] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.678255] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.678262] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.678269] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.678277] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[    0.678284] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.678292] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0x3fffffff] (subtractive decode)
[    0.678299] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.678326] pci_bus 0000:00: on NUMA node 0
[    0.678336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.678611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.678789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.678893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.679146] \_SB_.PCI0:_OSC invalid UUID
[    0.679151] _OSC request data:1 1f 1f 
[    0.679162]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.679273] \_SB_.PCI0:_OSC invalid UUID
[    0.679277] _OSC request data:1 0 1d 
[    0.679288]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.679293] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.688599] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.688743] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.688883] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.689022] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.689161] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.689302] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.689443] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.689581] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.689879] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.689899] vgaarb: loaded
[    0.689903] vgaarb: bridge control possible 0000:00:02.0
[    0.690020] PCI: Using ACPI for IRQ routing
[    0.699265] PCI: pci_cache_line_size set to 64 bytes
[    0.699380] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.699387] reserve RAM buffer: 000000003edf4000 - 000000003fffffff 
[    0.699394] reserve RAM buffer: 000000003f52f000 - 000000003fffffff 
[    0.699401] reserve RAM buffer: 000000003f6f0000 - 000000003fffffff 
[    0.699672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.699684] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.701713] Switching to clocksource hpet
[    0.705754] pnp: PnP ACPI init
[    0.705795] ACPI: bus type pnp registered
[    0.706207] pnp 00:00: [bus 00-ff]
[    0.706216] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.706222] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.706228] pnp 00:00: [io  0x0d00-0xffff window]
[    0.706235] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.706241] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.706247] pnp 00:00: [mem 0x000e0000-0x000effff window]
[    0.706254] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.706264] pnp 00:00: [mem 0x3f800000-0x3fffffff window]
[    0.706271] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.706413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.706467] pnp 00:01: [io  0x0000-0x001f]
[    0.706473] pnp 00:01: [io  0x0081-0x0091]
[    0.706478] pnp 00:01: [io  0x0093-0x009f]
[    0.706484] pnp 00:01: [io  0x00c0-0x00df]
[    0.706490] pnp 00:01: [dma 4]
[    0.706560] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.706591] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.706657] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.706859] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.706975] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.706984] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.707017] pnp 00:04: [io  0x00f0]
[    0.707037] pnp 00:04: [irq 13]
[    0.707108] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.707143] pnp 00:05: [io  0x002e-0x002f]
[    0.707149] pnp 00:05: [io  0x004e-0x004f]
[    0.707154] pnp 00:05: [io  0x0061]
[    0.707159] pnp 00:05: [io  0x0063]
[    0.707164] pnp 00:05: [io  0x0062]
[    0.707170] pnp 00:05: [io  0x0065]
[    0.707175] pnp 00:05: [io  0x0066]
[    0.707180] pnp 00:05: [io  0x0067]
[    0.707185] pnp 00:05: [io  0x0068]
[    0.707191] pnp 00:05: [io  0x006c]
[    0.707196] pnp 00:05: [io  0x0070]
[    0.707201] pnp 00:05: [io  0x0080]
[    0.707206] pnp 00:05: [io  0x0092]
[    0.707212] pnp 00:05: [io  0x00b2-0x00b3]
[    0.707217] pnp 00:05: [io  0x0680-0x069f]
[    0.707223] pnp 00:05: [io  0x1000-0x1003]
[    0.707229] pnp 00:05: [io  0x1010-0x101f]
[    0.707234] pnp 00:05: [io  0x1004-0x1007]
[    0.707240] pnp 00:05: [io  0x0400-0x047f]
[    0.707245] pnp 00:05: [io  0x0500-0x057f]
[    0.707369] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.707377] system 00:05: [io  0x1000-0x1003] has been reserved
[    0.707385] system 00:05: [io  0x1010-0x101f] has been reserved
[    0.707392] system 00:05: [io  0x1004-0x1007] has been reserved
[    0.707399] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.707406] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.707415] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.707488] pnp 00:06: [io  0x06a0-0x06af]
[    0.707495] pnp 00:06: [io  0x06b0-0x06ff]
[    0.707596] system 00:06: [io  0x06a0-0x06af] has been reserved
[    0.707604] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    0.707612] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.707640] pnp 00:07: [io  0x0070-0x0077]
[    0.707653] pnp 00:07: [irq 8]
[    0.707723] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.707755] pnp 00:08: [io  0x0060]
[    0.707760] pnp 00:08: [io  0x0064]
[    0.707773] pnp 00:08: [irq 1]
[    0.707851] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.707884] pnp 00:09: [irq 12]
[    0.707960] pnp 00:09: Plug and Play ACPI device, IDs TOS0220 SYN1900 SYN0002 PNP0f13 (active)
[    0.708385] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.708392] pnp 00:0a: [mem 0x00000000-0x00003fff]
[    0.708398] pnp 00:0a: [mem 0x00000000-0x00000fff]
[    0.708404] pnp 00:0a: [mem 0x00000000-0x00000fff]
[    0.708411] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.708417] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    0.708423] pnp 00:0a: [mem 0xff800000-0xff8001ff]
[    0.708556] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.708564] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[    0.708572] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.708580] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[    0.708588] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.708596] system 00:0a: [mem 0xff800000-0xff8001ff] has been reserved
[    0.708604] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.709031] pnp: PnP ACPI: found 11 devices
[    0.709036] ACPI: ACPI bus type pnp unregistered
[    0.709043] PnPBIOS: Disabled by ACPI PNP
[    0.751654] PCI: max bus depth: 1 pci_try_num: 2
[    0.751702] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.751712] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.751723] pci 0000:00:1c.0:   bridge window [mem 0x43000000-0x43ffffff]
[    0.751733] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[    0.751745] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.751752] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.751762] pci 0000:00:1c.1:   bridge window [mem 0x42000000-0x42ffffff]
[    0.751773] pci 0000:00:1c.1:   bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[    0.751785] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.751837] pci 0000:00:1c.0: setting latency timer to 64
[    0.751861] pci 0000:00:1c.1: setting latency timer to 64
[    0.751874] pci 0000:00:1e.0: setting latency timer to 64
[    0.751883] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.751890] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.751896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.751903] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.751910] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[    0.751916] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[    0.751923] pci_bus 0000:00: resource 10 [mem 0x3f800000-0x3fffffff]
[    0.751930] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[    0.751937] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.751943] pci_bus 0000:01: resource 1 [mem 0x43000000-0x43ffffff]
[    0.751950] pci_bus 0000:01: resource 2 [mem 0x40000000-0x40ffffff 64bit pref]
[    0.751957] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.751964] pci_bus 0000:02: resource 1 [mem 0x42000000-0x42ffffff]
[    0.751971] pci_bus 0000:02: resource 2 [mem 0x41000000-0x41ffffff 64bit pref]
[    0.751978] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.751984] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.751990] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.751997] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.752004] pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000effff]
[    0.752010] pci_bus 0000:03: resource 9 [mem 0x000f0000-0x000fffff]
[    0.752017] pci_bus 0000:03: resource 10 [mem 0x3f800000-0x3fffffff]
[    0.752023] pci_bus 0000:03: resource 11 [mem 0x40000000-0xfebfffff]
[    0.752200] NET: Registered protocol family 2
[    0.752389] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.753027] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.754049] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.754493] TCP: Hash tables configured (established 131072 bind 65536)
[    0.754500] TCP reno registered
[    0.754510] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.754531] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.754858] NET: Registered protocol family 1
[    0.754895] pci 0000:00:02.0: Boot video device
[    2.352225] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.352398] PCI: CLS 64 bytes, default 64
[    2.352538] Unpacking initramfs...
[    2.871021] Freeing initrd memory: 10204k freed
[    2.880648] Simple Boot Flag at 0x44 set to 0x1
[    2.881917] audit: initializing netlink socket (disabled)
[    2.881949] type=2000 audit(1363821155.704:1): initialized
[    2.912222] highmem bounce pool size: 64 pages
[    2.912234] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.913217] VFS: Disk quotas dquot_6.5.2
[    2.913306] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.913465] msgmni has been set to 1750
[    2.913945] alg: No test for stdrng (krng)
[    2.914042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.914050] io scheduler noop registered
[    2.914054] io scheduler deadline registered
[    2.914115] io scheduler cfq registered (default)
[    2.914305] pcieport 0000:00:1c.0: setting latency timer to 64
[    2.914401] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    2.914547] pcieport 0000:00:1c.1: setting latency timer to 64
[    2.914632] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    2.914833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.914885] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.914891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.915615] intel_idle: does not run on family 6 model 54
[    2.915720] ERST: Table is not found!
[    2.915726] GHES: HEST is not enabled!
[    2.915777] isapnp: Scanning for PnP cards...
[    3.269663] isapnp: No Plug & Play device found
[    3.269846] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.271488] Linux agpgart interface v0.103
[    3.272006] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    3.299058] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.299076] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.299474] mousedev: PS/2 mouse device common for all mice
[    3.300095] rtc_cmos 00:07: RTC can wake from S4
[    3.300337] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    3.300384] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.300408] cpuidle: using governor ladder
[    3.300413] cpuidle: using governor menu
[    3.300990] TCP cubic registered
[    3.301180] NET: Registered protocol family 10
[    3.302494] Mobile IPv6
[    3.302501] NET: Registered protocol family 17
[    3.302511] Registering the dns_resolver key type
[    3.302560] Using IPI No-Shortcut mode
[    3.302914] PM: Hibernation image not present or could not be loaded.
[    3.302938] registered taskstats version 1
[    3.303707] rtc_cmos 00:07: setting system clock to 2013-03-20 23:12:36 UTC (1363821156)
[    3.303863] Initializing network drop monitor service
[    3.304144] Freeing unused kernel memory: 416k freed
[    3.304574] Write protecting the kernel text: 2848k
[    3.304662] Write protecting the kernel read-only data: 1092k
[    3.304670] NX-protecting the kernel data: 3296k
[    3.331830] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.333913] udevd[59]: starting version 175
[    3.416287] usbcore: registered new interface driver usbfs
[    3.416362] usbcore: registered new interface driver hub
[    3.416492] usbcore: registered new device driver usb
[    3.416888] alx: module is from the staging directory, the quality is unknown, you have been warned.
[    3.418462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.418564] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.418577] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.418654] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.418707] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    3.418733] ehci_hcd 0000:00:1d.7: debug port 1
[    3.418915] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
[    3.418985] alx 0000:01:00.0: DMA to 64-BIT addresses
[    3.419017] alx 0000:01:00.0: setting latency timer to 64
[    3.419317] alx 0000:01:00.0: (unregistered net_device): HW Flags = 0x15
[    3.419748] alx 0000:01:00.0: (unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
[    3.421127] alx 0000:01:00.0: (unregistered net_device): speed = 0x2f, autoneg = 1
[    3.422629] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    3.422693] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x44105000
[    3.422864] alx 0000:01:00.0: irq 42 for MSI/MSI-X
[    3.424624] alx: Atheros Gigabit Network Connection
[    3.434138] thermal LNXTHERM:00: registered as thermal_zone0
[    3.434148] ACPI: Thermal Zone [TZ01] (51 C)
[    3.439234] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.439326] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.439337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.439346] usb usb1: Product: EHCI Host Controller
[    3.439354] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    3.439361] usb usb1: SerialNumber: 0000:00:1d.7
[    3.439866] hub 1-0:1.0: USB hub found
[    3.439885] hub 1-0:1.0: 8 ports detected
[    3.441347] uhci_hcd: USB Universal Host Controller Interface driver
[    3.441465] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.441477] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.441517] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.441582] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000040a0
[    3.441694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.441704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.441712] usb usb2: Product: UHCI Host Controller
[    3.441720] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    3.441727] usb usb2: SerialNumber: 0000:00:1d.0
[    3.442179] hub 2-0:1.0: USB hub found
[    3.442203] hub 2-0:1.0: 2 ports detected
[    3.442488] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.442500] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.442535] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.442626] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[    3.442750] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.442760] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.442768] usb usb3: Product: UHCI Host Controller
[    3.442775] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    3.442783] usb usb3: SerialNumber: 0000:00:1d.1
[    3.446046] ACPI: Fan [FAN0] (on)
[    3.446149] hub 3-0:1.0: USB hub found
[    3.446166] hub 3-0:1.0: 2 ports detected
[    3.446454] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.446466] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.446502] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.446607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    3.446731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.446741] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.446750] usb usb4: Product: UHCI Host Controller
[    3.446758] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    3.446766] usb usb4: SerialNumber: 0000:00:1d.2
[    3.447259] hub 4-0:1.0: USB hub found
[    3.447277] hub 4-0:1.0: 2 ports detected
[    3.447557] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    3.447570] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.447605] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.447695] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[    3.447823] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.447834] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.447843] usb usb5: Product: UHCI Host Controller
[    3.447852] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    3.447859] usb usb5: SerialNumber: 0000:00:1d.3
[    3.448282] hub 5-0:1.0: USB hub found
[    3.448299] hub 5-0:1.0: 2 ports detected
[    3.463381] SCSI subsystem initialized
[    3.473839] libata version 3.00 loaded.
[    3.476327] ahci 0000:00:1f.2: version 3.0
[    3.476475] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    3.476574] ahci: SSS flag set, parallel bus scan disabled
[    3.476648] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.476662] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
[    3.476677] ahci 0000:00:1f.2: setting latency timer to 64
[    3.480204] scsi0 : ahci
[    3.480642] scsi1 : ahci
[    3.480905] scsi2 : ahci
[    3.482955] scsi3 : ahci
[    3.483239] ata1: SATA max UDMA/133 abar m1024@0x44104000 port 0x44104100 irq 43
[    3.483249] ata2: SATA max UDMA/133 abar m1024@0x44104000 port 0x44104180 irq 43
[    3.483255] ata3: DUMMY
[    3.483259] ata4: DUMMY
[    3.802896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.803875] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA70K, max UDMA/133
[    3.803897] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.804903] ata1.00: configured for UDMA/133
[    3.805178] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
[    3.862826] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    3.878794] Refined TSC clocksource calibration: 1596.000 MHz.
[    3.878812] Switching to clocksource tsc
[    4.122567] ata2: SATA link down (SStatus 0 SControl 300)
[    4.132821] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    4.133058] sd 0:0:0:0: [sda] Write Protect is off
[    4.133070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.133175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.192579]  sda: sda1 sda2 < sda5 sda6 >
[    4.193605] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.197894] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.251287] usb 1-4: New USB device found, idVendor=0bda, idProduct=0138
[    4.251297] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.251303] usb 1-4: Product: USB2.0-CRW
[    4.251308] usb 1-4: Manufacturer: Generic
[    4.251313] usb 1-4: SerialNumber: 20090516388200000
[    4.263099] Initializing USB Mass Storage driver...
[    4.263244] usbcore: registered new interface driver usb-storage
[    4.263251] USB Mass Storage support registered.
[    4.283752] scsi4 : usb-storage 1-4:1.0
[    4.283997] usbcore: registered new interface driver ums-realtek
[    4.366363] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[    4.559851] usb 1-6: New USB device found, idVendor=10f1, idProduct=1a34
[    4.559876] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.559883] usb 1-6: Product: TOSHIBA Web Camera
[    4.559888] usb 1-6: Manufacturer: Importek
[    4.559893] usb 1-6: SerialNumber: MU462ASA
[    4.805931] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    4.947164] microcode: CPU0 sig=0x30661, pf=0x8, revision=0x10d
[    4.952463] platform microcode: firmware: agent aborted loading intel-ucode/06-36-01 (not found?)
[    4.952678] microcode: CPU1 sig=0x30661, pf=0x8, revision=0x10d
[    4.957998] platform microcode: firmware: agent aborted loading intel-ucode/06-36-01 (not found?)
[    4.958240] microcode: CPU2 sig=0x30661, pf=0x8, revision=0x10d
[    4.964795] platform microcode: firmware: agent aborted loading intel-ucode/06-36-01 (not found?)
[    4.965041] microcode: CPU3 sig=0x30661, pf=0x8, revision=0x10d
[    4.971351] platform microcode: firmware: agent aborted loading intel-ucode/06-36-01 (not found?)
[    4.971719] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.973276] usb 2-2: New USB device found, idVendor=4168, idProduct=1010
[    4.973288] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.973297] usb 2-2: Product: Targus Wireless Compact Laser Mouse
[    4.973305] usb 2-2: Manufacturer: reserved
[    4.975614] usb 1-4: USB disconnect, device number 3
[    4.989035] input: reserved Targus Wireless Compact Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[    4.989485] generic-usb 0003:4168:1010.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Targus Wireless Compact Laser Mouse] on usb-0000:00:1d.0-2/input0
[    4.989548] usbcore: registered new interface driver usbhid
[    4.989556] usbhid: USB HID core driver
[    5.094982] PM: Starting manual resume from disk
[    5.094990] PM: Hibernation image partition 8:5 present
[    5.094995] PM: Looking for hibernation image.
[    5.107258] PM: Image not found (code -22)
[    5.107263] PM: Hibernation image not present or could not be loaded.
[    5.156626] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.833973] udevd[380]: starting version 175
[    7.250137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.250156] ACPI: Power Button [PWRB]
[    7.250376] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    7.252780] ACPI: Lid Switch [LID0]
[    7.253021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.253037] ACPI: Power Button [PWRF]
[    7.256620] ACPI: Requesting acpi_cpufreq
[    7.273139] Monitor-Mwait will be used to enter C-1 state
[    7.274953] Monitor-Mwait will be used to enter C-2 state
[    7.274973] ACPI: acpi_idle registered with cpuidle
[    7.280328] ACPI: AC Adapter [ADP0] (on-line)
[    7.447944] coretemp coretemp.0: Unable to read TjMax from CPU 0
[    7.447967] coretemp coretemp.0: Using relative temperature scale!
[    7.448002] coretemp coretemp.0: Unable to read TjMax from CPU 2
[    7.448028] coretemp coretemp.0: Using relative temperature scale!
[    7.508035] ACPI: Battery Slot [BAT0] (battery present)
[    7.590922] iTCO_vendor_support: vendor-support=0
[    7.599141] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    7.599417] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[    7.599589] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.651698] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.898257] cfg80211: Calling CRDA to update world regulatory domain
[    8.218040] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    8.218103] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.278707] rtl8192ce 0000:02:00.0: setting latency timer to 64
[    8.278844] rtl8192ce:_rtl92ce_read_chip_version():<0-0> Chip Version ID: Unknown. Bug?
[    8.289015] ****** This B_CUT device may not work with kernels 3.6 and earlier
[    8.597943] Linux media interface: v0.10
[    8.612393] rtl8192ce 0000:02:00.0: firmware: agent loaded rtlwifi/rtl8192cfwU_B.bin into memory
[    8.618339] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[    8.620888] Linux video capture interface: v2.00
[    8.649291] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera (10f1:1a34)
[    8.663865] input: TOSHIBA Web Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[    8.664065] usbcore: registered new interface driver uvcvideo
[    8.664070] USB Video Class driver (1.1.1)
[    8.678349] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    8.689970] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    8.691519] rtlwifi: wireless switch is on
[    8.740669] cfg80211: World regulatory domain updated:
[    8.740677] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.740685] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.740692] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.740699] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.740706] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.740712] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.740908] cfg80211: Calling CRDA for country: EC
[    8.759614] cfg80211: Regulatory domain changed to country: EC
[    8.759624] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.759634] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    8.759643] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[    8.759652] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[    8.759661] cfg80211:     (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[   10.567208] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   10.568738] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0
[   10.571247] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.573019] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.573788] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.442422] Adding 2065404k swap on /dev/sda5.  Priority:-1 extents:1 across:2065404k 
[   12.472654] EXT4-fs (sda1): re-mounted. Opts: (null)
[   12.797832] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.924867] loop: module loaded
[   15.111790] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   18.877242] Bluetooth: Core ver 2.16
[   18.877311] NET: Registered protocol family 31
[   18.877321] Bluetooth: HCI device and connection manager initialized
[   18.877334] Bluetooth: HCI socket layer initialized
[   18.877343] Bluetooth: L2CAP socket layer initialized
[   18.877369] Bluetooth: SCO socket layer initialized
[   19.601235] Bluetooth: RFCOMM TTY layer initialized
[   19.601257] Bluetooth: RFCOMM socket layer initialized
[   19.601264] Bluetooth: RFCOMM ver 1.11
[   19.734149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.734160] Bluetooth: BNEP filters: protocol multicast
[   20.137736] lp: driver loaded but no devices found
[   20.200533] ppdev: user-space parallel port driver
[   20.813320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.815820] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.828645] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   21.171557] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.859483] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   23.988631] wlan0: authenticate with 00:26:5b:d2:73:88 (try 1)
[   23.990178] wlan0: authenticated
[   23.991371] wlan0: associate with 00:26:5b:d2:73:88 (try 1)
[   23.998616] wlan0: RX AssocResp from 00:26:5b:d2:73:88 (capab=0xc31 status=0 aid=1)
[   23.998625] wlan0: associated
[   24.009477] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.303985] eth0: no IPv6 routers present
[   35.253198] wlan0: no IPv6 routers present
[   41.418582] fuse init (API version 7.17)

TIA

Luis Santos


Toshiba NB520-11V -- Linux 2.6.32-5-amd64 x86_64

Offline

Be excellent to each other!

#2 2013-03-21 05:02:22

pvsage
Internal Affairs
From: North Carolina
Registered: 2009-10-18
Posts: 12,788

Re: Intel GMA500 Driver problems - #! Resolution

Looks like Poulsbo is still a mess.  It's getting better, but it's still not there.


I'm a moderator here.  How are we doing?  Feedback is encouraged.

Offline

#3 2013-03-21 13:10:44

snowpine
#!-a-roo
Registered: 2008-11-24
Posts: 2,924

Re: Intel GMA500 Driver problems - #! Resolution

Why not simply install Openbox on Fedora 18, copy over some of the #! config files?


/hugged

Offline

#4 2013-03-21 19:02:04

Larsantos
Member
Registered: 2012-04-17
Posts: 15

Re: Intel GMA500 Driver problems - #! Resolution

snowpine wrote:

Why not simply install Openbox on Fedora 18, copy over some of the #! config files?


I think I'll try that since I don't have much time to make things run on the netbook, I'm a bit afraid that the system will be bloated but I'm sure with a little help I'll manage to put a lean system up.


Toshiba NB520-11V -- Linux 2.6.32-5-amd64 x86_64

Offline

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo