New, and having problems with my resolution, would appreciate help.

Damnation · 2012-06-26 00:42:56

Hello, my alias is Damnation. A user on Forumkorner.com reccomended I begin to learn Unix ect. and he did not hold my hand, but he did help me set up crunchbang. However, right off the bat, I am experiencing a fairly impressive obstacle. My screen resolution will not fit properly. Yes I have fiddled with my moniter. Yes I have tried "xrandr". In xrandr, the best resolution I can get, is 900x600. My moniter is at least 1024x(?). Perhaphs someone can help me. And before you re-direct me to another thread, I have read multiple, I cannot seem to pull anything from them.

The sticker on the front of my computer says "AMD Sempron". (The sticker for my graphics card)

snowpine · 2012-06-26 01:12:51

Welcome to the forums! smile

A good first step is to open a terminal (super + T) and run the following command:

lspci | grep VGA

This will identify your video hardware. Copy & paste the output back here so we can take a look and help you. smile

Damnation · 2012-06-26 01:14:15

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter

snowpine · 2012-06-26 01:19:19

I see that forum member vicshrike reported success with this card, might want to contact him:

http://crunchbanglinux.org/forums/post/228413/#p228413

Damnation · 2012-06-26 01:21:26

What do I ask him?

Damnation · 2012-06-26 02:19:15

Still need help with this issue!

pidsley · 2012-06-26 02:24:47

Relax, and take a deep breath. You only waited an hour before you bumped your thread. Remember people here helping you are volunteers. Someone will be here to help you eventually, but maybe not as quickly as you'd like. There are people on this forum from all parts of the world, and some of them may be sleeping now (maybe the exact person with the answer to your problem). Relax. If you can't relax, do some more google searching. If that doesn't help, try reading some other active threads on this board so you can see how things work here. We are a very friendly and helpful group, and we will do our best to help you, but sometimes it takes a little while to get a good solution.

Last edited by pidsley (2012-06-26 03:09:12)

xaos52 · 2012-06-26 10:37:20

Do you have the correct video driver installed?
Run the following command in a terminal window:

dpkg -l | grep xserver-xorg-video-sis

If the command returns nothing, install the driver with:

sudo apt-get install xserver-xorg-video-sis

and reboot

Last edited by xaos52 (2012-06-26 10:38:17)

machinebacon · 2012-06-26 15:26:02

Just a little FYI, I once used a laptop with this card and needed to install a hand-made driver which I got from here: http://ubuntuforums.org/showthread.php? … sis+mirage

A quite long thread, but it was indeed 2-3 years ago when I last tried. bgerlich or Barros Lee (I think it was the latter, working for SiS) provided the driver there, good luck!

Damnation · 2012-06-29 23:21:29

I am still having problems with this issue.

pidsley · 2012-06-30 00:18:43

What have you tried? Did you follow machinebacon's link? Did you run the commands xaos52 gave in his post? Did you create an xorg.conf file, and if you did, what did you put in it? Did you follow the link you were given in this post by VDP76? Did you download and try any other distros, as I recommended in this post? What happened if you did? Please give us more information... "it still doesn't work" doesn't help us help you.

And please don't just say "I've tried everything" -- we need exact details on what you tried and any error messages you received.

Last edited by pidsley (2012-06-30 00:32:47)

Damnation · 2012-06-30 06:54:27

xaos52 wrote:

Do you have the correct video driver installed?
Run the following command in a terminal window:
dpkg -l | grep xserver-xorg-video-sis
If the command returns nothing, install the driver with:
sudo apt-get install xserver-xorg-video-sis
and reboot

I get this...

crunchbang@crunchbang:~$ sudo apt-get install xserver-xorg-video-sis
Reading package lists... Done
Building dependency tree       
Reading state information... Done
xserver-xorg-video-sis is already the newest version.
xserver-xorg-video-sis set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

Damnation · 2012-06-30 06:56:34

machinebacon wrote:

Just a little FYI, I once used a laptop with this card and needed to install a hand-made driver which I got from here: http://ubuntuforums.org/showthread.php? … sis+mirage
A quite long thread, but it was indeed 2-3 years ago when I last tried. bgerlich or Barros Lee (I think it was the latter, working for SiS) provided the driver there, good luck!

All the links for it were broken.

Damnation · 2012-06-30 06:58:29

snowpine wrote:

I see that forum member vicshrike reported success with this card, might want to contact him:
http://crunchbanglinux.org/forums/post/228413/#p228413

Didn't get back to me...

Damnation · 2012-06-30 07:02:27

Yes, I tried another distro. Was still incorrect resolution.

I made xorg.conf and put EXACTLY wwhat was in the thread I was linked to, into it.

SabreWolfy · 2012-06-30 08:18:03

^ Which other distro(s) did you try?

Gedis · 2012-06-30 09:06:58

in menu-settings-openbox-autostart,i put this line
xrandr -s 1024x768 -r 75 &
it's work to me.

xaos52 · 2012-06-30 10:01:48

Post output of

cat /var/log/Xorg.0.log

Damnation · 2012-06-30 15:59:27

xaos52 wrote:

Post output of
cat /var/log/Xorg.0.log

crunchbang@crunchbang:~$ cat /var/log/Xorg.0.log

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux crunchbang 2.6.32-5-686 #1 SMP Mon Jan 16 16:04:25 UTC 2012 i686
Kernel command line: initrd=/live/initrd1.img boot=live config   quiet BOOT_IMAGE=/live/vmlinuz1 
Build Date: 30 October 2011  08:56:49PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.24.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 30 02:47:18 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecce0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6330:1043:8159 Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xe8000000/134217728, 0xfeae0000/131072, I/O @ 0x0000bc00/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched sis as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 0.10.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 2.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 0.4.2
    ABI class: X.Org Video Driver, version 6.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
    SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 0.0.2
    ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.7.7.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xBC00
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(--) SIS(0): Video BIOS version "2.18.00" found (new SiS data layout)
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0):          whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
        http://www.winischhofer.eu/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): 32768K shared video RAM (UMA)
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 133.634 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xFEAE0000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0): 
    Dear SiS76x user, your machine is using a shared memory framebuffer.
    Due to hardware limitations of the SiS chip in combination with the
    AMD CPU, video overlay support is very limited on this machine. If you
    experience flashing lines in the video and/or the graphics display
    during video playback, reduce the color depth and/or the resolution
    and/or the refresh rate. Alternatively, use the video blitter.
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): Gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction is disabled
(--) SIS(0): Memory bandwidth at 32 bpp is 267.268 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT1 DDC probing failed
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.18.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level none
(II) SIS(0): VESA VBE DDC transfer in appr. 0 sec.
(II) SIS(0): VESA VBE DDC read failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 195 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Using real widescreen modes for CRT1 VGA devices
(II) SIS(0):     Use option "ForceCRT1VGAAspect" to overrule
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) SIS(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range:  10.00 to 195.31 MHz
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x400" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "320x200" (vrefresh out of range)
(II) SIS(0): Not using default mode "512x384" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "856x480" (hsync out of range)
(II) SIS(0): Not using default mode "1360x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(--) SIS(0): Virtual size is 960x600 (pitch 960)
(**) SIS(0): *Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600"x60.0   41.50  960 1008 1088 1120  600 603 609 618 +hsync +vsync (37.1 kHz)
(**) SIS(0): *Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540"x60.0   37.29  960 976 1008 1104  540 543 549 563 +hsync +vsync (33.8 kHz)
(**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SIS(0): *Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "768x576"x60.1   35.00  768 792 872 976  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "720x576"x60.1   32.73  720 744 816 912  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480"x59.8   33.94  856 872 1000 1072  480 492 495 529 -hsync -vsync (31.7 kHz)
(**) SIS(0): *Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480"x60.0   39.77  800 840 968 1056  480 552 556 628 +hsync +vsync (37.7 kHz)
(**) SIS(0): *Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480"x61.0   28.28  720 728 840 896  480 490 492 517 -hsync -vsync (31.6 kHz)
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 492 525 -hsync -vsync (31.3 kHz)
(**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync (31.3 kHz)
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.2.1
    ABI class: X.Org Video Driver, version 6.0
(II) SIS(0): 2D acceleration enabled
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.18.00
(II) SIS(0): Setting standard mode 0x22
(II) SIS(0): SiS76x/UMA: one video overlay(s) available in current mode
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (959,8582)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    8x8 color pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        15 512x512 slots
        32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1603.74Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0):     Checked libc memcpy()...     506.4 MiB/s
(--) SIS(0):     Checked built-in-1 memcpy()...     503.8 MiB/s
(--) SIS(0):     Checked built-in-2 memcpy()...     21.2 MiB/s
(--) SIS(0):     Checked MMX memcpy()...     484.4 MiB/s
(--) SIS(0):     Checked 3DNow! memcpy()...     503.4 MiB/s
(--) SIS(0):     Checked MMX2 memcpy()...     542.1 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(==) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
(**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
crunchbang@crunchbang:~$

pidsley · 2012-06-30 16:06:51

Did you delete the xorg.conf file you created? Is it still at /etc/X11/xorg.conf? It does not appear that it's being used. If you did not delete it, please post the output of

cat /etc/X11/xorg.conf

xaos52 · 2012-06-30 19:11:06

The info you posted is from a live boot.
Did you try installing to Hard Disk?
Did you have the same problem booting from HD?

CrunchBang Linux

SEARCH

#1 2012-06-26 00:42:56

New, and having problems with my resolution, would appreciate help.

#2 2012-06-26 01:12:51

Re: New, and having problems with my resolution, would appreciate help.

#3 2012-06-26 01:14:15

Re: New, and having problems with my resolution, would appreciate help.

#4 2012-06-26 01:19:19

Re: New, and having problems with my resolution, would appreciate help.

#5 2012-06-26 01:21:26

Re: New, and having problems with my resolution, would appreciate help.

#6 2012-06-26 02:19:15

Re: New, and having problems with my resolution, would appreciate help.

#7 2012-06-26 02:24:47

Re: New, and having problems with my resolution, would appreciate help.

#8 2012-06-26 10:37:20

Re: New, and having problems with my resolution, would appreciate help.

#9 2012-06-26 15:26:02

Re: New, and having problems with my resolution, would appreciate help.

#10 2012-06-29 23:21:29

Re: New, and having problems with my resolution, would appreciate help.

#11 2012-06-30 00:18:43

Re: New, and having problems with my resolution, would appreciate help.

#12 2012-06-30 06:54:27

Re: New, and having problems with my resolution, would appreciate help.

#13 2012-06-30 06:56:34

Re: New, and having problems with my resolution, would appreciate help.

#14 2012-06-30 06:58:29

Re: New, and having problems with my resolution, would appreciate help.

#15 2012-06-30 07:02:27

Re: New, and having problems with my resolution, would appreciate help.

#16 2012-06-30 08:18:03

Re: New, and having problems with my resolution, would appreciate help.

#17 2012-06-30 09:06:58

Re: New, and having problems with my resolution, would appreciate help.

#18 2012-06-30 10:01:48

Re: New, and having problems with my resolution, would appreciate help.

#19 2012-06-30 15:59:27

Re: New, and having problems with my resolution, would appreciate help.

#20 2012-06-30 16:06:51

Re: New, and having problems with my resolution, would appreciate help.

#21 2012-06-30 19:11:06

Re: New, and having problems with my resolution, would appreciate help.

Board footer