You are not logged in.
- Topics: Active | Unanswered
#1 2011-11-29 05:31:28
- lighthammer
- Member
- From: The Moon
- Registered: 2011-11-16
- Posts: 13
(Solved) Syntax error - Anyone notice anything out of the ordinary?
Here is my error message when I boot up #!
One or more XML syntax errors were found while parsing the Openbox configuration files. See stdout for more information. The last error seen was in file "/home/lighthammer/.config/openbox/rc.xml" line 803 with message: Premature end of data in tag openbox_config line 2
Here is my rc.xml file. Bear with me, its pretty long. Does anyone see anything out of the ordinary?
_____
<?xml version="1.0" encoding="UTF-8"?>
<openbox_config xmlns="http://openbox.org/3.4/rc">
<resistance>
<strength>10</strength>
<screen_edge_strength>20</screen_edge_strength>
</resistance>
<focus>
<focusNew>yes</focusNew>
<!-- always try to focus new windows when they appear. other rules do
apply -->
<followMouse>no</followMouse>
<!-- move focus to a window when you move the mouse into it -->
<focusLast>yes</focusLast>
<!-- focus the last used window when changing desktops, instead of the one
under the mouse pointer. when followMouse is enabled -->
<underMouse>no</underMouse>
<!-- move focus under the mouse, even when the mouse is not moving -->
<focusDelay>200</focusDelay>
<!-- when followMouse is enabled, the mouse must be inside the window for
this many milliseconds (1000 = 1 sec) before moving focus to it -->
<raiseOnFocus>no</raiseOnFocus>
<!-- when followMouse is enabled, and a window is given focus by moving the
mouse into it, also raise the window -->
</focus>
<placement>
<policy>Smart</policy>
<!-- 'Smart' or 'UnderMouse' -->
<center>yes</center>
<!-- whether to place windows in the center of the free area found or
the top left corner -->
<monitor>Any</monitor>
</placement>
<theme>
<name>Shiki-Statler</name>
<titleLayout>DSLIMC</titleLayout>
<!--
avaible characters are NDSLIMC, each can occur at most once.
N: window icon
L: window label (AKA title).
I: iconify
M: maximize
C: close
S: shade (roll up/down)
D: omnipresent (on all desktops).
-->
<keepBorder>yes</keepBorder>
<animateIconify>yes</animateIconify>
<font place="ActiveWindow">
<name>Sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="InactiveWindow">
<name>Sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuHeader">
<name>Sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="MenuItem">
<name>Sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
<font place="OnScreenDisplay">
<name>Sans</name>
<size>9</size>
<!-- font size in points -->
<weight>normal</weight>
<!-- 'bold' or 'normal' -->
<slant>normal</slant>
<!-- 'italic' or 'normal' -->
</font>
</theme>
<desktops>
<!-- this stuff is only used at startup, pagers allow you to change them
during a session
these are default values to use when other ones are not already set
by other applications, or saved in your session
use obconf if you want to change these without having to log out
and back in -->
<number>2</number>
<firstdesk>1</firstdesk>
<names>
<name>The Grid</name>
<name>Galactica</name>
<name>3</name>
<name>4</name>
</names>
<popupTime>875</popupTime>
<!-- The number of milliseconds to show the popup for when switching
desktops. Set this to 0 to disable the popup. -->
</desktops>
<resize>
<drawContents>yes</drawContents>
<popupShow>Nonpixel</popupShow>
<!-- 'Always', 'Never', or 'Nonpixel' (xterms and such) -->
<popupPosition>Center</popupPosition>
<!-- 'Center' or 'Top' -->
<popupFixedPosition>
<x>0</x>
<y>0</y>
</popupFixedPosition>
</resize>
<!-- You can reserve a portion of your screen where windows will not cover when
they are maximized, or when they are initially placed.
Many programs reserve space automatically, but you can use this in other
cases. -->
<margins>
<top>1</top>
<bottom>1</bottom>
<left>0</left>
<right>0</right>
</margins>
<dock>
<position>TopLeft</position>
<!-- (Top|Bottom)(Left|Right|)|Top|Bottom|Left|Right|Floating -->
<floatingX>0</floatingX>
<floatingY>0</floatingY>
<noStrut>no</noStrut>
<stacking>Above</stacking>
<!-- 'Above', 'Normal', or 'Below' -->
<direction>Vertical</direction>
<!-- 'Vertical' or 'Horizontal' -->
<autoHide>no</autoHide>
<hideDelay>300</hideDelay>
<!-- in milliseconds (1000 = 1 second) -->
<showDelay>300</showDelay>
<!-- in milliseconds (1000 = 1 second) -->
<moveButton>Middle</moveButton>
<!-- 'Left', 'Middle', 'Right' -->
</dock>
<keyboard>
<chainQuitKey>C-g</chainQuitKey>
<!-- Keybindings for desktop switching -->
<keybind key="C-A-Left">
<action name="DesktopLeft">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Right">
<action name="DesktopRight">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Up">
<action name="DesktopUp">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Down">
<action name="DesktopDown">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Left">
<action name="SendToDesktopLeft">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Right">
<action name="SendToDesktopRight">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Up">
<action name="SendToDesktopUp">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Down">
<action name="SendToDesktopDown">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="W-F1">
<action name="Desktop">
<desktop>1</desktop>
</action>
</keybind>
<keybind key="W-F2">
<action name="Desktop">
<desktop>2</desktop>
</action>
</keybind>
<keybind key="W-F3">
<action name="Desktop">
<desktop>3</desktop>
</action>
</keybind>
<keybind key="W-F4">
<action name="Desktop">
<desktop>4</desktop>
</action>
</keybind>
<keybind key="W-d">
<action name="ToggleShowDesktop"/>
</keybind>
<!-- Keybindings for windows -->
<keybind key="A-F4">
<action name="Close"/>
</keybind>
<keybind key="A-Escape">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</keybind>
<keybind key="A-space">
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</keybind>
<keybind key="Print">
<action name="Execute">
<execute>scrot '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/images/ & viewnior ~/images/$f'</execute>
</action>
</keybind>
<keybind key="A-Print">
<action name="Execute">
<execute>scrot -d 10 '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/images/ & viewnior ~/images/$f'</execute>
</action>
</keybind>
<!-- Keybindings for window switching -->
<keybind key="A-Tab">
<action name="NextWindow"/>
</keybind>
<keybind key="A-S-Tab">
<action name="PreviousWindow"/>
</keybind>
<keybind key="C-A-Tab">
<action name="NextWindow">
<panels>yes</panels>
<desktop>yes</desktop>
</action>
</keybind>
<!-- Keybindings for running applications -->
<keybind key="A-F2">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Run Program</name>
</startupnotify>
<command>gmrun</command>
</action>
</keybind>
<keybind key="A-F3">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>dmenu-bind</name>
</startupnotify>
<command>~/.config/dmenu/dmenu-bind.sh</command>
</action>
</keybind>
<keybind key="W-f">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>thunar</name>
</startupnotify>
<command>thunar</command>
</action>
</keybind>
<keybind key="W-t">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Terminal</name>
</startupnotify>
<command>terminator</command>
</action>
</keybind>
<keybind key="W-w">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Web Browser</name>
</startupnotify>
<command>x-www-browser</command>
</action>
</keybind>
<keybind key="W-l">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Lock screen</name>
</startupnotify>
<command>cb-lock</command>
</action>
</keybind>
<keybind key="W-e">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Editor</name>
</startupnotify>
<command>gedit</command>
</action>
</keybind>
<keybind key="W-m">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Mediaplayer</name>
</startupnotify>
<command>vlc</command>
</action>
</keybind>
<keybind key="W-v">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Volume</name>
</startupnotify>
<command>xfce4-mixer</command>
</action>
</keybind>
<keybind key="W-x">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Logout</name>
</startupnotify>
<command>openbox-logout</command>
</action>
</keybind>
<keybind key="W-Tab">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</keybind>
<keybind key="W-space">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</keybind>
<keybind key="A-C-q">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</keybind>
</keyboard>
<mouse>
<dragThreshold>8</dragThreshold>
<!-- number of pixels the mouse must move before a drag begins -->
<doubleClickTime>200</doubleClickTime>
<!-- in milliseconds (1000 = 1 second) -->
<screenEdgeWarpTime>400</screenEdgeWarpTime>
<!-- Time before changing desktops when the pointer touches the edge of the
screen while moving a window, in milliseconds (1000 = 1 second).
Set this to 0 to disable warping -->
<context name="Frame">
<mousebind button="A-Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="A-Left" action="Click">
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="A-Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Right" action="Drag">
<action name="Resize"/>
</mousebind>
<mousebind button="A-Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-S-Up" action="Click">
<action name="SendToDesktopPrevious"/>
</mousebind>
<mousebind button="A-S-Down" action="Click">
<action name="SendToDesktopNext"/>
</mousebind>
</context>
<context name="Titlebar">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="Left" action="DoubleClick">
<action name="ToggleMaximizeFull"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Up" action="Click">
<action name="Shade"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
<action name="Lower"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="Unshade"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Top">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>top</edge>
</action>
</mousebind>
</context>
<context name="Left">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>left</edge>
</action>
</mousebind>
</context>
<context name="Right">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>right</edge>
</action>
</mousebind>
</context>
<context name="Bottom">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>bottom</edge>
</action>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="BRCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="TLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="TRCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="Client">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Icon">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="AllDesktops">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleOmnipresent"/>
</mousebind>
</context>
<context name="Shade">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleShade"/>
</mousebind>
</context>
<context name="Iconify">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Iconify"/>
</mousebind>
</context>
<context name="Maximize">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleMaximizeFull"/>
</mousebind>
<mousebind button="Middle" action="Click">
<action name="ToggleMaximizeVert"/>
</mousebind>
<mousebind button="Right" action="Click">
<action name="ToggleMaximizeHorz"/>
</mousebind>
</context>
<context name="Close">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Close"/>
</mousebind>
</context>
<context name="Desktop">
<mousebind button="Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Root">
<!-- Menus -->
<mousebind button="Middle" action="Press">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</mousebind>
</context>
<context name="MoveResize">
<mousebind button="Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
</context>
</mouse>
<menu>
<!-- You can specify more than one menu file in here and they are all loaded,
just don't make menu ids clash or, well, it'll be kind of pointless -->
<!-- default menu file (or custom one in $HOME/.config/openbox/) -->
<!-- system menu files on Debian systems
<file>/var/lib/openbox/debian-menu.xml</file>
<file>debian-menu.xml</file> -->
<file>menu.xml</file>
<hideDelay>200</hideDelay>
<middle>no</middle>
<submenuShowDelay>100</submenuShowDelay>
<applicationIcons>yes</applicationIcons>
</menu>
<applications>
#
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.
<application name="first element of window's WM_CLASS property (see xprop)"
class="second element of window's WM_CLASS property (see xprop)"
role="the window's WM_WINDOW_ROLE property (see xprop)">
# the name or the class can be set, or both. this is used to match
# windows when they appear. role can optionally be set as well, to
# further restrict your matches.
# the name, class, and role use simple wildcard matching such as those
# used by a shell. you can use * to match any characters and ? to match
# any single character.
# when multiple rules match a window, they will all be applied, in the
# order that they appear in this list
# each element can be left out or set to 'default' to specify to not
# change that attribute of the window
<decor>yes</decor>
# enable or disable window decorations
<shade>no</shade>
# make the window shaded when it appears, or not
<position>
# the position is only used if both an x and y coordinate are provided
# (and not set to 'default')
<x>center</x>
# a number like 50, or 'center' to center on screen. use a negative number
# to start from the right (or bottom for <y>), ie -50 is 50 pixels from the
# right edge (or bottom).
<y>200</y>
<monitor>1</monitor>
# specifies the monitor in a xinerama setup.
# 1 is the first head, or 'mouse' for wherever the mouse is
</position>
<focus>yes</focus>
# if the window should try be given focus when it appears. if this is set
# to yes it doesn't guarantee the window will be given focus. some
# restrictions may apply, but Openbox will try to
<desktop>1</desktop>
# 1 is the first desktop, 'all' for all desktops
<layer>normal</layer>
# 'above', 'normal', or 'below'
<iconic>no</iconic>
# make the window iconified when it appears, or not
<skip_pager>no</skip_pager>
# asks to not be shown in pagers
<skip_taskbar>no</skip_taskbar>
# asks to not be shown in taskbars. window cycling actions will also
# skip past such windows
<fullscreen>yes</fullscreen>
# make the window in fullscreen mode when it appears
<maximized>true</maximized>
# 'Horizontal', 'Vertical' or boolean (yes/no)
</application>
# end of the example
-->
<application name="gmessage">
<decor>no</decor>
<shade>no</shade>
<skip_pager>yes</skip_pager>
<skip_taskbar>yes</skip_taskbar>
<fullscreen>no</fullscreen>
<maximized>no</maximized>
</application>
<application name="openbox-logout">
<decor>no</decor>
<shade>no</shade>
<skip_pager>yes</skip_pager>
<fullscreen>no</fullscreen>
<maximized>no</maximized>
<layer>above</layer>
</application>
</applications>
</openbox_config>Last edited by lighthammer (2011-11-29 22:16:46)
Offline
Be excellent to each other!
#2 2011-11-29 05:32:52
- machinebacon
- #! unstable
- From: China
- Registered: 2009-07-02
- Posts: 6,825
- Website
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
Edit your post and use [code ] tags
[ code ]
blah blah blah
[ /code ]
Else I refuse looking into it 
Sweaty lads picking up the soap | I love the new "Ignore user" button
Offline
#3 2011-11-29 05:36:22
- lighthammer
- Member
- From: The Moon
- Registered: 2011-11-16
- Posts: 13
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
Done. 
I'll sign up for a pastebin account after this question.
Offline
#4 2011-11-29 05:45:24
- machinebacon
- #! unstable
- From: China
- Registered: 2009-07-02
- Posts: 6,825
- Website
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
There's a crunchbang pastebin, see the top part of this website ("QUICK REFERENCE PASTEBIN GET CRUNCHBANG")
It's easier for us to find line 803 then.
Have you changed the file or is it the original?
Last edited by machinebacon (2011-11-29 05:46:08)
Sweaty lads picking up the soap | I love the new "Ignore user" button
Offline
#5 2011-11-29 06:05:16
- mynis01
- #! Die Hard
- From: 127.0.0.1
- Registered: 2010-07-02
- Posts: 2,005
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
I'm only counting 802 lines in that file.
Offline
#6 2011-11-29 06:39:21
- machinebacon
- #! unstable
- From: China
- Registered: 2009-07-02
- Posts: 6,825
- Website
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
#
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.add one line with <!-- as shown here:
<!--
#
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.save, reconfigure.
Last edited by machinebacon (2011-11-29 06:39:43)
Sweaty lads picking up the soap | I love the new "Ignore user" button
Offline
#7 2011-11-29 22:14:52
- lighthammer
- Member
- From: The Moon
- Registered: 2011-11-16
- Posts: 13
Re: (Solved) Syntax error - Anyone notice anything out of the ordinary?
Yes sir, that did the trick. The error message is gone.
I don't quite get how that line is important but thats for another day. Thanks for your help.
Offline
Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.
