SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

Pages: 1 2 3

#51 2011-08-29 07:56:58

machinebacon
#! unstable
From: China
Registered: 2009-07-02
Posts: 6,825
Website

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

@rhowaldt: http://crunchbanglinux.org/forums/post/141822/#p141822

...but we have been running #! on steam engines and microwave ovens, so age shouldn't matter big_smile

Sweaty lads picking up the soap | I love the new "Ignore user" button

Offline

Be excellent to each other!

#52 2011-08-29 08:43:03

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

My 2 cents:
1. Examine dmesg output for I/O or other errors
2. As has been suggested already, try running bootchart to find out which processes are stalling
gl

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#53 2011-08-29 09:03:40

Aleph
#! CrunchBanger
Registered: 2011-07-28
Posts: 165

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Hi xaos52,

I don't know how to do the bootchart...

luis@crunchbang:~$ dmesg 
Initializing cgroup subsys cpu
Linux version 2.6.36-2.dmz.5-liquorix-686 (Debian 2.6.36-25) (damentz@gmail.com) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 ZEN SMP PREEMPT Wed Dec 15 03:28:54 UTC 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f7df000 (usable)
 BIOS-e820: 000000001f7e0000 - 000000001f7fffc0 (ACPI data)
 BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1f7df max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 01F800000 mask FFF800000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 504MB, range: 8MB, type UC
total RAM covered: 504M
Found optimal setting for mtrr clean up
 gran_size: 64K     chunk_size: 16M     num_reg: 2      lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 504MB, range: 8MB, type UC
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000001f7df000
 0000000000 - 0000400000 page 4k
 0000400000 - 001f400000 page 2M
 001f400000 - 001f7df000 page 4k
kernel direct mapping tables up to 1f7df000 @ 7000-c000
RAMDISK: 16af5000 - 17a27000
ACPI: RSDP 000e5010 00014 (v00 INSYDE)
ACPI: RSDT 1f7fb30b 00034 (v01 INSYDE RSDT_000 00000100 ABCD 00010200)
ACPI: FACP 1f7ffb00 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
ACPI: DSDT 1f7fb970 0418E (v01 COMPAL EDL7x    00000001 INTL 02002036)
ACPI: FACS 1f7fffc0 00040
ACPI: APIC 1f7ffb90 00068 (v01 STUPID MAPIC_00 30307830 ABCD 00010200)
ACPI: SSDT 1f7fb517 002B9 (v01  PmRef  Cpu0Ist 00003000 INTL 20030522)
ACPI: SSDT 1f7fb33f 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
503MB LOWMEM available.
  mapped low ram: 0 - 1f7df000
  low ram: 0 - 1f7df000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x0001f7df
  HighMem  empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0001f7df
On node 0 totalpages: 128893
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 976 pages used for memmap
  Normal zone: 123919 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [8000 - 87ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 1f800000 (gap: 1f800000:e0700000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c1800000 s37760 r0 d23680 u2097152
pcpu-alloc: s37760 r0 d23680 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127885
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-2.dmz.5-liquorix-686 root=UUID=8e3e9fda-c392-4afb-a142-e3cfc25f36e9 ro quiet splash
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (44 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0000200000 - 00007ff58c]   TEXT DATA BSS
  #3 [0016af5000 - 0017a27000]         RAMDISK
  #4 [000009fc00 - 0000100000]   BIOS reserved
  #5 [0000800000 - 0000803114]             BRK
  #6 [0000002000 - 0000003000]      TRAMPOLINE
  #7 [0000003000 - 0000007000]     ACPI WAKEUP
  #8 [0000007000 - 0000008000]         PGTABLE
  #9 [0001000000 - 0001001000]         BOOTMEM
  #10 [0001001100 - 0001001140]         BOOTMEM
  #11 [0001002000 - 0001082000]         BOOTMEM
  #12 [0001082000 - 0001102000]         BOOTMEM
  #13 [0001102000 - 0001182000]         BOOTMEM
  #14 [0001182000 - 0001202000]         BOOTMEM
  #15 [0001202000 - 0001282000]         BOOTMEM
  #16 [0001282000 - 0001302000]         BOOTMEM
  #17 [0001302000 - 0001382000]         BOOTMEM
  #18 [0001382000 - 0001402000]         BOOTMEM
  #19 [0001001000 - 00010010c0]         BOOTMEM
  #20 [0001402000 - 0001403800]         BOOTMEM
  #21 [00010010c0 - 00010010e7]         BOOTMEM
  #22 [0001001140 - 0001001220]         BOOTMEM
  #23 [0001001240 - 0001001280]         BOOTMEM
  #24 [0001001280 - 00010012c0]         BOOTMEM
  #25 [00010012c0 - 0001001300]         BOOTMEM
  #26 [0001001300 - 0001001340]         BOOTMEM
  #27 [0001001340 - 0001001380]         BOOTMEM
  #28 [0001001380 - 00010013c0]         BOOTMEM
  #29 [00010013c0 - 0001001400]         BOOTMEM
  #30 [0001001400 - 0001001410]         BOOTMEM
  #31 [0001001440 - 00010014b4]         BOOTMEM
  #32 [00010014c0 - 0001001534]         BOOTMEM
  #33 [0001800000 - 000180f000]         BOOTMEM
  #34 [0001a00000 - 0001a0f000]         BOOTMEM
  #35 [0001001540 - 0001001544]         BOOTMEM
  #36 [0001001580 - 0001001584]         BOOTMEM
  #37 [00010015c0 - 00010015c8]         BOOTMEM
  #38 [0001001600 - 0001001608]         BOOTMEM
  #39 [0001001640 - 00010016e8]         BOOTMEM
  #40 [0001001700 - 0001001768]         BOOTMEM
  #41 [0001403800 - 0001405800]         BOOTMEM
  #42 [0001405800 - 0001445800]         BOOTMEM
  #43 [0001445800 - 0001465800]         BOOTMEM
Initializing HighMem for node 0 (00000000:00000000)
Memory: 489200k/515964k available (3361k kernel code, 26372k reserved, 1729k data, 528k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe76000 - 0xfffff000   (1572 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdffdf000 - 0xff7fe000   ( 504 MB)
    lowmem  : 0xc0000000 - 0xdf7df000   ( 503 MB)
      .init : 0xc06f9000 - 0xc077d000   ( 528 kB)
      .data : 0xc0548462 - 0xc06f8be8   (1729 kB)
      .text : 0xc0200000 - 0xc0548462   (3361 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:512
CPU 0 irqstacks, hard=c1800000 soft=c1801000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1596.142 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.28 BogoMIPS (lpj=1596142)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Events: p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
SMP alternatives: switching to UP code
ACPI: Core revision 20100702
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Brought up 1 CPUs
Total of 1 processors activated (3192.28 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe9694, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd007ffff]
pci 0000:00:02.0: reg 14: [io  0xe000-0xe007]
pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xd0080000-0xd00bffff]
pci 0000:00:02.1: reg 10: [mem 0xd0100000-0xd017ffff]
pci 0000:00:1d.0: reg 20: [io  0x1200-0x121f]
pci 0000:00:1d.1: reg 20: [io  0x1220-0x123f]
pci 0000:00:1d.2: reg 20: [io  0x1240-0x125f]
pci 0000:00:1d.3: reg 20: [io  0x1260-0x127f]
pci 0000:00:1d.7: reg 10: [mem 0x00000000-0x000003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10: [io  0xe100-0xe1ff]
pci 0000:00:1e.2: reg 14: [io  0xe200-0xe23f]
pci 0000:00:1e.2: reg 18: [mem 0xd00c0000-0xd00c01ff]
pci 0000:00:1e.2: reg 1c: [mem 0xd00c0200-0xd00c02ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1e.3: reg 10: [io  0xe300-0xe3ff]
pci 0000:00:1e.3: reg 14: [io  0xe400-0xe47f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1300-0x133f] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0600-067f
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1100-0x110f]
pci 0000:00:1f.3: reg 20: [io  0x1400-0x141f]
pci 0000:01:00.0: reg 10: [mem 0xc0002800-0xc0002fff]
pci 0000:01:00.0: reg 14: [io  0xc100-0xc17f]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:01:01.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:01:01.0: reg 14: [mem 0xc0002000-0xc00020ff]
pci 0000:01:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:01.0: supports D1 D2
pci 0000:01:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:01.0: PME# disabled
pci 0000:01:02.0: reg 10: [mem 0xc0001000-0xc0001fff]
pci 0000:01:02.0: PME# supported from D0 D3hot D3cold
pci 0000:01:02.0: PME# disabled
pci 0000:01:04.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:01:04.0: supports D1 D2
pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.1: reg 10: [mem 0xc0000000-0xc000007f]
pci 0000:01:04.1: supports D1 D2
pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:01:04.1: PME# disabled
pci 0000:01:04.2: reg 10: [mem 0xc0000100-0xc00001ff]
pci 0000:01:04.2: supports D1 D2
pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:01:04.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000001f7df000 - 000000001fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:05: [io  0x0600-0x060f] has been reserved
system 00:05: [io  0x0680-0x06ff] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x1000-0x107f] has been reserved
system 00:05: [io  0x1180-0x11bf] has been reserved
system 00:05: [io  0x1640-0x164f] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:05: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
pci 0000:00:1d.7: BAR 0: assigned [mem 0x20000000-0x200003ff]
pci 0000:00:1d.7: BAR 0: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff]
pci 0000:01:04.0: BAR 9: assigned [mem 0x90000000-0x93ffffff pref]
pci 0000:01:04.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff]
pci 0000:01:01.0: BAR 6: assigned [mem 0x94000000-0x9401ffff pref]
pci 0000:01:04.0: BAR 0: assigned [mem 0xc0003000-0xc0003fff]
pci 0000:01:04.0: BAR 0: set to [mem 0xc0003000-0xc0003fff] (PCI address [0xc0003000-0xc0003fff]
pci 0000:01:04.0: BAR 7: assigned [io  0xc400-0xc4ff]
pci 0000:01:04.0: BAR 8: assigned [io  0xc800-0xc8ff]
pci 0000:01:04.0: CardBus bridge to [bus 02-05]
pci 0000:01:04.0:   bridge window [io  0xc400-0xc4ff]
pci 0000:01:04.0:   bridge window [io  0xc800-0xc8ff]
pci 0000:01:04.0:   bridge window [mem 0x90000000-0x93ffffff pref]
pci 0000:01:04.0:   bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:01:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xcfffffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff 64bit pref]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0xc400-0xc4ff]
pci_bus 0000:02: resource 1 [io  0xc800-0xc8ff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x93ffffff pref]
pci_bus 0000:02: resource 3 [mem 0xc4000000-0xc7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS mismatch (16 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 15560k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1314608321.740:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 985
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
serial 0000:00:1e.3: PCI INT B disabled
Adaptec aacraid driver 1.1-5[26400]-ms
Fixed MDIO Bus: probed
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP vegas registered
TCP yeah registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
TuxOnIce core not loaded yet.
registered taskstats version 1
Freeing unused kernel memory: 528k freed
CFS CPU scheduler.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[473]: starting version 164
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x20000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001200
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001220
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001240
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001260
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
r8169 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
r8169 0000:01:01.0: (unregistered net_device): no PCI Express capability
r8169 0000:01:01.0: eth0: RTL8169sb/8110sb at 0xe0188000, 00:0f:b0:5c:f0:a7, XID 10000000 IRQ 21
libata version 3.00 loaded.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:04.2: SDHCI controller found [1524:0550] (rev 0)
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
sdhci-pci 0000:01:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:04.2] using PIO
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
firewire_ohci 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[drm] Initialized drm 1.1.0 20060810
firewire_ohci: Added fw-ohci device 0000:01:00.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x1
ata1.00: ATA-5: TOSHIBA MK6021GAS, GA024A, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA 
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532A, TI51, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6021GA GA02 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L532A TI51 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
[drm] set up 7M of stolen space
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
firewire_core: created device fw0: GUID 00023f415e4001c3, S400
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
PM: Starting manual resume from disk
TuxOnIce core not loaded yet.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udev[734]: starting version 164
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
cfg80211: Calling CRDA to update world regulatory domain
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1e.2: setting latency timer to 64
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
intel_rng: FWH not detected
intel8x0_measure_ac97_clock: measured 50386 usecs (2429 samples)
intel8x0: clocking to 48000
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0x1400-0x141f] conflicts with ACPI region SMBI [??? 0x00001400-0x0000140f flags 0x49]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Battery Slot [BAT1] (battery present)
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
yenta_cardbus 0000:01:04.0: CardBus bridge found [14c0:0012]
yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:01:04.0: TI: mfunc 0x89001202, devctl 0x44
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: AC Adapter [ACAD] (on-line)
yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x0cd8, PCI irq 16
yenta_cardbus 0000:01:04.0: Socket status: 30000006
pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [io  0xc000-0xdfff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: excluding 0xc000-0xc17f 0xc400-0xc4ff 0xc800-0xc8ff
yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xcfffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xcfffffff: excluding 0xc0000000-0xc07fffff 0xc4000000-0xc7ffffff
yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x9fffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x9fffffff: excluding 0x90000000-0x9fffffff
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
ipw2200 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
Adding 989180k swap on /dev/sda5.  Priority:-1 extents:1 across:989180k 
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
IPv4 FIB: Using LC-trie version 0.409
fuse init (API version 7.15)
r8169 0000:01:01.0: eth0: link down
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth1: no IPv6 routers present
lib80211_crypt: registered algorithm 'CCMP'
padlock: VIA PadLock not detected.
lib80211_crypt: registered algorithm 'TKIP'
luis@crunchbang:~$

Offline

#54 2011-08-29 09:09:37

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Here is what I did (but I am in 'testing')

    sudo apt get install bootchart bootchart-view
    change /etc/bootchartd.conf
        TMPFS_SIZE=32m
        SAMPLE_PERIOD=0.2
        PROCESS_ACCOUNTING="no"
        BOOTLOG_DEST=/var/log/bootchart.tgz
        AUTO_STOP_LOGGER="yes"
        AUTO_RENDER="yes"
        AUTO_RENDER_FORMAT="png"
        AUTO_RENDER_DIR="/var/log"
    change kernel command line in grub
        init=/sbin/bootchartd
    boot
    shutdown
    normal boot
    bootchart
        creates png file in current dir
    view generated png in viewnior

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#55 2011-08-29 09:22:20

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

dmesg | grep -i error

gives

ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

some ACPI erors, but I must admit I do not know if that can cause the delays you are experiencing.
Perhaps someone else?

Edit: perhaps try adding -noacpi to boot command line in grub? See if it makes a difference.

Last edited by xaos52 (2011-08-29 09:24:24)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#56 2011-08-29 09:45:08

Aleph
#! CrunchBanger
Registered: 2011-07-28
Posts: 165

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Hi Xaos,

I tried 

 sudo apt get install bootchart bootchart-view

But it doesn't works for me.

I installed bootchart downloading the package from his web, but after reboot no bootchart.png was out...   Sorry

Edit: perhaps try adding -noacpi to boot command line in grub? See if it makes a difference.

How can I do this?

Offline

#57 2011-08-29 10:14:09

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Here are all messages containing "acpi" in dmesg:

 BIOS-e820: 000000003f66d000 - 000000003f6bf000 (ACPI NVS)
 BIOS-e820: 000000003f6ee000 - 000000003f6ff000 (ACPI data)
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 3f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
ACPI: FACP 3f6fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 3f6f0000 070CA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 3f688000 00040
ACPI: SSDT 3f6fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: HPET 3f6fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 3f6fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 3f6f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 3f6f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 3f6ef000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 3f6ee000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
  #7 [0000003000 - 0000007000]     ACPI WAKEUP
ACPI: Core revision 20100702
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 3f5b7c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 3f5b6e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 3f5b7f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 3f5b5f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
[b]PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug[/b]    <-------- ---------->
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7031a68), AE_ALREADY_EXISTS
ACPI: Power Button [PWRB]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button [SLPB]
ACPI: Power Button [PWRF]
ACPI: Thermal Zone [THRM] (27 C)
ACPI: Fan [FAN] (on)
acpi device:24: registered as cooling_device1
ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ACPI: acpi_idle yielding to intel_idle
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)

In the hope someone can come up with another suggestion
I have emphasized a message that could provide a solution.
Looking into that further now.
Perhaps moving to a more recent kernel might help.
But please wait a bit till I ( or someone else ) comes up with a more concrete suggestion.

Last edited by xaos52 (2011-08-29 10:16:35)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#58 2011-08-29 10:24:35

Aleph
#! CrunchBanger
Registered: 2011-07-28
Posts: 165

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Thanks Xaos52,

Ok, I will wait the solution.

Offline

#59 2011-08-29 10:58:55

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

OK. I would migrate to latest kernel in backports:
1. add backports repo if you havent already done so
2. sudo apt-get install update
3. sudo apt-get install linux-image-2.6-686-pae
this should install linux-image 2.6.39+35.1~bpo60+1
4. reboot with the new kernel
5. post new dmesg.log
thanks

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#60 2011-08-29 11:12:19

Aleph
#! CrunchBanger
Registered: 2011-07-28
Posts: 165

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

I don't know if the backports repo are added.
How to add?

Offline

#61 2011-08-29 11:41:45

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

edit /etc/apt/sources.list with your preferred editor, as root
The file probably contains these 2 lines:

## DEBIAN BACKPORTS
# deb http://backports.debian.org/debian-backports squeeze-backports main contrib nonfree

Remove the first 2 characters from that line
Then save the file

Last edited by xaos52 (2011-08-29 11:43:15)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#62 2011-08-29 12:12:07

rhowaldt
#!*$%:)
Registered: 2011-03-09
Posts: 4,396

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

machinebacon wrote:

@rhowaldt: http://crunchbanglinux.org/forums/post/141822/#p141822

...but we have been running #! on steam engines and microwave ovens, so age shouldn't matter big_smile

thanks, did not notice that one sentence in between all the logs and stuff smile
and while i agree that the age of a device should not matter for #! to run, it will matter if the device you're trying to run it on is broken because of that age. but that is the most meaningful thing i can add to this discussion, so i'll leave you guys to it with the logs and stuff, and hope for the OP's sake this isn't a hardware issue.

Offline

#63 2011-08-29 13:38:52

Aleph
#! CrunchBanger
Registered: 2011-07-28
Posts: 165

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

Hi friends,

the problem is solved... The hard drive is broken. I couldn't do anything and wasn't able to run again.

No HD at BIOS. I started with Puppy Linux without hard drive installed and work fine.

This afternoon i'll try bought a new hard drive and start again.

Thank you very much for your help.

See you soon.

Ah! do you like music?

This is me, Luis:

http://endrino.pntic.mec.es/~lorc0003/O … b/home.htm

Offline

#64 2011-08-29 16:11:12

rhowaldt
#!*$%:)
Registered: 2011-03-09
Posts: 4,396

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

@Aleph: post some stuff on Soundcloud for us too so we can actually hear you play after staring for minutes at the awesomeness of that picture smile

Offline

#65 2011-08-29 18:03:11

machinebacon
#! unstable
From: China
Registered: 2009-07-02
Posts: 6,825
Website

Re: [SOLVED] I have to wait about 3min to boot. Is it normal?

^ The colour scheme fits #! quite well, but doesn't look like rock & roll at first sight. However, +1 for a soundcloudish sample, Aleph. "Conciertos para amigos." That's us. We are waiting big_smile

BTW A pity that the drive broke, but I had a similar experience (damn you, Western Digital!) and there's nothing you can do about it.

Sweaty lads picking up the soap | I love the new "Ignore user" button

Offline

Pages: 1 2 3

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo