CrunchBang Linux

elias.ericson

Member

Registered: 2013-03-01

Posts: 18

[Solved] Mouse lag and empty desktop (Waldorf 64-bit)

Hello, I just installed Waldorf 64-bit. The installation went great, but after I logged in, a complete gray and completely empty desktop was shown, only with the mouse-cursor. The cursor was really laggy the first few minutes, then I could move it. The desktop remained empty and no keybindings worked at all, not even ctrl-alt-f1. Does anyone know why this is happening? I checked the md5 of the install-iso and it was correct, I also tried to boot and run the same iso via my laptop and it worked. Something must be wrong with my hardware?

Last edited by elias.ericson (2013-05-07 21:42:29)

elias.ericson

Member

Registered: 2013-03-01

Posts: 18

Re: [Solved] Mouse lag and empty desktop (Waldorf 64-bit)

Bump. Is it possible to solve this? I can run the Statler but not Waldorf. What might be the cause of this?

xaos52

The Good Doctor

From: Planet of the @s

Registered: 2011-06-24

Posts: 4,602

Re: [Solved] Mouse lag and empty desktop (Waldorf 64-bit)

CAn you boot from live media and post output of

lspci -knn

in the forum.

---

bootinfoscript - emacs primer - wireless problems- I ♥ #!

elias.ericson

Member

Registered: 2013-03-01

Posts: 18

Re: [Solved] Mouse lag and empty desktop (Waldorf 64-bit)

CAn you boot from live media and post output of

lspci -knn

in the forum.

Sorry for the delay! About the problem. I boot from waldorf live media => the os is loading, I can see text output while it's booting, but then I enter the desktop and I can't do anything. I can't even open a terminal or a tty. How can I write "lspci -knn" If i cannot open a terminal?
Edit: I now booted statler live media and called the command "lspci -knn" in a terminal, this is the output:

crunchbang@crunchbang:~$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM Controller [8086:0100] (rev 09)
	Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge PCI Express Root Port [8086:0101] (rev 09)
	Kernel driver in use: pcieport
00:02.0 Display controller [0380]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0112] (rev 09)
	Subsystem: Giga-byte Technology Device [1458:d000]
	Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Giga-byte Technology Device [1458:1c3a]
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:5006]
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:a102]
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
	Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 5 [8086:1c18] (rev b5)
	Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b5)
	Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 7 [8086:1c1c] (rev b5)
	Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 8 [8086:1c1e] (rev b5)
	Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:5006]
	Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller [8086:1c44] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:5001]
00:1f.2 IDE interface [0101]: Intel Corporation Cougar Point 4 port SATA IDE Controller [8086:1c00] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:b002]
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:5001]
	Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation Cougar Point 2 port SATA IDE Controller [8086:1c08] (rev 05)
	Subsystem: Giga-byte Technology Device [1458:b002]
	Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1080] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:2550]
	Kernel driver in use: nouveau
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0e09] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:2550]
	Kernel driver in use: snd_hda_intel
03:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 10)
04:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
	Subsystem: Giga-byte Technology GA-7VT600-1394 Motherboard [1458:1000]
	Kernel driver in use: firewire_ohci
05:00.0 USB Controller [0c03]: Device [1b6f:7023] (rev 01)
	Subsystem: Giga-byte Technology Device [1458:5007]
	Kernel driver in use: xhci_hcd
06:00.0 USB Controller [0c03]: Device [1b6f:7023] (rev 01)
	Subsystem: Giga-byte Technology Device [1458:5007]
	Kernel driver in use: xhci_hcd
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
	Kernel driver in use: r8169
08:00.0 IDE interface [0101]: Marvell Technology Group Ltd. Device [1b4b:917a] (rev 11)
	Subsystem: Giga-byte Technology Device [1458:b000]
crunchbang@crunchbang:~$ 

Last edited by elias.ericson (2013-03-29 12:44:44)

elias.ericson

Member

Registered: 2013-03-01

Posts: 18

Re: [Solved] Mouse lag and empty desktop (Waldorf 64-bit)

Hm I was hoping that wheezy going stable would fix this. But I still cannot use Waldorf. Anyone know what might cause this problem?

Edit: I talked to the people @debian, I had the same problem when installing debian 7. The problem was the non-free nvidia driver.

Last edited by elias.ericson (2013-05-07 21:42:10)