SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

Pages: 1

#1 2012-09-24 18:03:41

lazerking9
New Member
Registered: 2012-09-24
Posts: 4

wifi support?

I am running the stable version on a laptop with builtin wifi card.. For some reason, my wifi isnt showing up in NetworkManager... Can you help?

--------------------------------------------------

root@hvcp1-crunchbang:/# uname -a
Linux hvcp1-crunchbang 3.2.0-0.bpo.3-amd64 #1 SMP Thu Aug 23 07:41:30 UTC 2012 x86_64 GNU/Linux

root@hvcp1-crunchbang:/# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

Offline

Help fund CrunchBang, donate to the project!

#2 2012-09-24 18:09:21

dura
Bloated Gimp
From: interzone
Registered: 2012-09-15
Posts: 2,107

Re: wifi support?

Try:

sudo rfkill unblock all

Offline

#3 2012-09-24 18:23:42

lazerking9
New Member
Registered: 2012-09-24
Posts: 4

Re: wifi support?

http://ompldr.org/vZm1kcA
http://ompldr.org/vZm1kaQ

0: hp-wifi: Wireless LAN
    Soft blocked: no
    Hard blocked: no

No, it is still not showing up. When i try to turn on the wifi card using the switch on my computer, it doesnt acknowledge its turned on, like it cant find it or something,

Here's exactly what im talking about:
vZm1kcA
vZm1kaQ
normally, my wifi would show up here. In the first screengrab, it doesnt even show no connesctions available.. Ive used Ubuntu and the like before, and never had anywhere near this kind of problem..
When I tried #! i was expecting some hiccups, but nothing this big.

Offline

#4 2012-09-24 18:51:54

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: wifi support?

Post output of

lspci -knn | grep -EiA3 net

Do you have package 'firmware-realtek' installed?

Last edited by xaos52 (2012-09-24 18:53:01)

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#5 2012-09-24 20:44:49

Thinkit
New Member
Registered: 2012-05-04
Posts: 7

Re: wifi support?

Some help on this site?
http://wiki.debian.org/rtl819x

Offline

#6 2012-09-24 21:14:46

lazerking9
New Member
Registered: 2012-09-24
Posts: 4

Re: wifi support?

#lspci -knn | grepEiA3 net
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller [10ec:8171] (rev 10)
    Subsystem: Hewlett-Packard Company Device [103c:1467]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:1484]
    Kernel driver in use: r8169

And yes, I downloaded that firmware package already

Offline

#7 2012-09-25 07:16:58

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: wifi support?

No kernel driver loaded for your wifi card.
Should load 'rtl8192se' , and it is included with the kernel you are using.
Post output of 

dmesg

please.

bootinfoscript - emacs primer - wireless problems- I ♥ #!

Offline

#8 2012-09-26 19:11:30

lazerking9
New Member
Registered: 2012-09-24
Posts: 4

Re: wifi support?

Sorry... I dont always have access to an internet connection with my wifi not working..


#dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.3-amd64 (Debian 3.2.23-1~bpo60+2) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 23 07:41:30 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.3-amd64 root=UUID=54ccf5b1-0489-4076-a8ee-8492acf64c73 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bba61000 (usable)
[    0.000000]  BIOS-e820: 00000000bba61000 - 00000000bbabf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bbabf000 - 00000000bbb82000 (usable)
[    0.000000]  BIOS-e820: 00000000bbb82000 - 00000000bbbbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bbbbf000 - 00000000bbbe1000 (usable)
[    0.000000]  BIOS-e820: 00000000bbbe1000 - 00000000bbbf7000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bbbf7000 - 00000000bbc00000 (usable)
[    0.000000]  BIOS-e820: 00000000bbc00000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP G62 Notebook PC/1484, BIOS F.15 04/26/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xbbc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BBC00000 mask FFFC00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bbc00000
[    0.000000]  0000000000 - 00bbc00000 page 2M
[    0.000000] kernel direct mapping tables up to bbc00000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 37623000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000bbbf6120 00064 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bbbf5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000bbbe4000 0C8D0 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000bbb8f000 00040
[    0.000000] ACPI: HPET 00000000bbbf4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000bbbf3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000bbbf2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 00000000bbbf1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000bbbe3000 00176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 00000000bbbe2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bbbe1000 00655 (v01  PmRef    CpuPm 00003000 INTL 20060317)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bbc00000
[    0.000000] Initmem setup node 0 0000000000000000-00000000bbc00000
[    0.000000]   NODE_DATA [00000000bbbfb000 - 00000000bbbfffff]
[    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800b8200000-ffff8800babfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bba61
[    0.000000]     0: 0x000bbabf -> 0x000bbb82
[    0.000000]     0: 0x000bbbbf -> 0x000bbbe1
[    0.000000]     0: 0x000bbbf7 -> 0x000bbc00
[    0.000000] On node 0 totalpages: 768733
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10458 pages used for memmap
[    0.000000]   DMA32 zone: 754293 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bba61000 - 00000000bbabf000
[    0.000000] PM: Registered nosave memory: 00000000bbb82000 - 00000000bbbbf000
[    0.000000] PM: Registered nosave memory: 00000000bbbe1000 - 00000000bbbf7000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bb800000 s82816 r8192 d23680 u524288
[    0.000000] pcpu-alloc: s82816 r8192 d23680 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 758214
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.3-amd64 root=UUID=54ccf5b1-0489-4076-a8ee-8492acf64c73 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3012872k/3076096k available (3519k kernel code, 1164k absent, 62060k reserved, 3214k data, 612k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2294.129 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.25 BogoMIPS (lpj=9176516)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004052] Security Framework initialized
[    0.004059] AppArmor: AppArmor disabled by boot time parameter
[    0.004381] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010386] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011738] Mount-cache hash table entries: 256
[    0.011900] Initializing cgroup subsys cpuacct
[    0.011907] Initializing cgroup subsys memory
[    0.011920] Initializing cgroup subsys devices
[    0.011924] Initializing cgroup subsys freezer
[    0.011925] Initializing cgroup subsys net_cls
[    0.011927] Initializing cgroup subsys blkio
[    0.011936] Initializing cgroup subsys perf_event
[    0.011973] CPU: Physical Processor ID: 0
[    0.011975] CPU: Processor Core ID: 0
[    0.011977] mce: CPU supports 6 MCE banks
[    0.011985] CPU0: Thermal monitoring enabled (TM2)
[    0.012013] using mwait in idle threads.
[    0.013134] ACPI: Core revision 20110623
[    0.020452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062100] CPU0: Intel Pentium(R) Dual-Core CPU       T4500  @ 2.30GHz stepping 0a
[    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.064003] ... version:                2
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] Booting Node   0, Processors  #1
[    0.064003] smpboot cpu 1: start_ip = 99000
[    0.152043] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152084] Brought up 2 CPUs
[    0.152087] Total of 2 processors activated (9176.69 BogoMIPS).
[    0.153005] devtmpfs: initialized
[    0.156021] PM: Registering ACPI NVS region at bbb82000 (249856 bytes)
[    0.156176] print_constraints: dummy: 
[    0.156234] NET: Registered protocol family 16
[    0.156338] ACPI: bus type pci registered
[    0.156425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.156428] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.163444] PCI: Using configuration type 1 for base access
[    0.164077] bio: create slab <bio-0> at 0
[    0.164102] ACPI: Added _OSI(Module Device)
[    0.164102] ACPI: Added _OSI(Processor Device)
[    0.164102] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164102] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165649] ACPI: EC: Look up EC in DSDT
[    0.167297] ACPI: Executed 1 blocks of module-level executable AML code
[    0.169159] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.169704] ACPI: SSDT 00000000bba70c98 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20060317)
[    0.170084] ACPI: Dynamic OEM Table Load:
[    0.170087] ACPI: SSDT           (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20060317)
[    0.170274] ACPI: SSDT 00000000bba6e618 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20060317)
[    0.170634] ACPI: Dynamic OEM Table Load:
[    0.170637] ACPI: SSDT           (null) 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20060317)
[    0.192348] ACPI: SSDT 00000000bba6fe18 001CF (v01  PmRef    ApIst 00003000 INTL 20060317)
[    0.192746] ACPI: Dynamic OEM Table Load:
[    0.192749] ACPI: SSDT           (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20060317)
[    0.204160] ACPI: SSDT 00000000bba70f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060317)
[    0.204533] ACPI: Dynamic OEM Table Load:
[    0.204536] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20060317)
[    0.216116] ACPI: Interpreter enabled
[    0.216121] ACPI: (supports S0 S3 S4 S5)
[    0.216161] ACPI: Using IOAPIC for interrupt routing
[    0.225340] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.225538] ACPI: No dock devices found.
[    0.225541] HEST: Table not found.
[    0.225545] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.226638] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.226641] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.226644] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.226647] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.226660] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.226683] DMAR: Forcing write-buffer flush capability
[    0.226684] DMAR: Disabling IOMMU for graphics on this chipset
[    0.226712] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[    0.226725] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.226733] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.226739] pci 0000:00:02.0: reg 20: [io  0x4110-0x4117]
[    0.226776] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[    0.226787] pci 0000:00:02.1: reg 10: [mem 0xd2400000-0xd24fffff 64bit]
[    0.226861] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.226917] pci 0000:00:1a.0: reg 20: [io  0x40e0-0x40ff]
[    0.226992] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.227055] pci 0000:00:1a.1: reg 20: [io  0x40c0-0x40df]
[    0.227140] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.229740] pci 0000:00:1a.7: reg 10: [mem 0xd4505c00-0xd4505fff]
[    0.249783] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.249788] pci 0000:00:1a.7: PME# disabled
[    0.249816] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.249832] pci 0000:00:1b.0: reg 10: [mem 0xd4500000-0xd4503fff 64bit]
[    0.249904] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.249908] pci 0000:00:1b.0: PME# disabled
[    0.249931] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.250006] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.250010] pci 0000:00:1c.0: PME# disabled
[    0.250034] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.250109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.250113] pci 0000:00:1c.1: PME# disabled
[    0.250146] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.250197] pci 0000:00:1d.0: reg 20: [io  0x40a0-0x40bf]
[    0.250261] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.250316] pci 0000:00:1d.1: reg 20: [io  0x4080-0x409f]
[    0.250387] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.250448] pci 0000:00:1d.2: reg 20: [io  0x4060-0x407f]
[    0.252019] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[    0.252081] pci 0000:00:1d.3: reg 20: [io  0x4040-0x405f]
[    0.252164] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.255609] pci 0000:00:1d.7: reg 10: [mem 0xd4505800-0xd4505bff]
[    0.276063] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.276068] pci 0000:00:1d.7: PME# disabled
[    0.276091] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.276160] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.276288] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.276308] pci 0000:00:1f.2: reg 10: [io  0x4108-0x410f]
[    0.276317] pci 0000:00:1f.2: reg 14: [io  0x411c-0x411f]
[    0.276325] pci 0000:00:1f.2: reg 18: [io  0x4100-0x4107]
[    0.276334] pci 0000:00:1f.2: reg 1c: [io  0x4118-0x411b]
[    0.276342] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.276351] pci 0000:00:1f.2: reg 24: [mem 0xd4505000-0xd45057ff]
[    0.276400] pci 0000:00:1f.2: PME# supported from D3hot
[    0.276404] pci 0000:00:1f.2: PME# disabled
[    0.276423] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.276439] pci 0000:00:1f.3: reg 10: [mem 0xd4506000-0xd45060ff 64bit]
[    0.276462] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.276502] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[    0.276526] pci 0000:00:1f.6: reg 10: [mem 0xd4504000-0xd4504fff 64bit]
[    0.276671] pci 0000:02:00.0: [10ec:8171] type 0 class 0x000280
[    0.276689] pci 0000:02:00.0: reg 10: [io  0x3000-0x30ff]
[    0.276701] pci 0000:02:00.0: reg 14: [mem 0xd3500000-0xd3503fff]
[    0.276813] pci 0000:02:00.0: supports D1 D2
[    0.276815] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.276820] pci 0000:02:00.0: PME# disabled
[    0.284033] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.284037] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.284041] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd44fffff]
[    0.284048] pci 0000:00:1c.0:   bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.284112] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[    0.284129] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
[    0.284159] pci 0000:03:00.0: reg 18: [mem 0xd1410000-0xd1410fff 64bit pref]
[    0.284178] pci 0000:03:00.0: reg 20: [mem 0xd1400000-0xd140ffff 64bit pref]
[    0.284191] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.284259] pci 0000:03:00.0: supports D1 D2
[    0.284261] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284266] pci 0000:03:00.0: PME# disabled
[    0.292031] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.292035] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.292039] pci 0000:00:1c.1:   bridge window [mem 0xd2500000-0xd34fffff]
[    0.292045] pci 0000:00:1c.1:   bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.292110] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.292120] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.292123] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.292125] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.292128] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.292146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.292389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.292479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.292535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.292677]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.292854]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.298118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298180] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298241] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298363] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298423] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.298483] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.298544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.298728] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.298728] vgaarb: loaded
[    0.298728] vgaarb: bridge control possible 0000:00:02.0
[    0.298728] PCI: Using ACPI for IRQ routing
[    0.300378] PCI: pci_cache_line_size set to 64 bytes
[    0.300463] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    0.300466] reserve RAM buffer: 00000000bba61000 - 00000000bbffffff 
[    0.300469] reserve RAM buffer: 00000000bbb82000 - 00000000bbffffff 
[    0.300472] reserve RAM buffer: 00000000bbbe1000 - 00000000bbffffff 
[    0.300474] reserve RAM buffer: 00000000bbc00000 - 00000000bbffffff 
[    0.300600] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.300605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.300610] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.304118] Switching to clocksource hpet
[    0.306061] pnp: PnP ACPI init
[    0.306083] ACPI: bus type pnp registered
[    0.306123] pnp 00:00: [mem 0xf8000000-0xfbffffff]
[    0.306198] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.306202] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.306845] pnp 00:01: [bus 00-ff]
[    0.306847] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.306849] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.306851] pnp 00:01: [io  0x0d00-0xffff window]
[    0.306854] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.306856] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[    0.306858] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[    0.306860] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[    0.306862] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[    0.306864] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[    0.306866] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[    0.306868] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[    0.306870] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[    0.306872] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[    0.306874] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[    0.306877] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[    0.306879] pnp 00:01: [mem 0x000ec000-0x000effff window]
[    0.306881] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[    0.306883] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[    0.306885] pnp 00:01: [mem 0xfed40000-0xfed44fff window]
[    0.306963] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.307135] pnp 00:02: [io  0x002e-0x002f]
[    0.307137] pnp 00:02: [io  0x004e-0x004f]
[    0.307139] pnp 00:02: [io  0x164e-0x164f]
[    0.307141] pnp 00:02: [io  0x0061]
[    0.307143] pnp 00:02: [io  0x0070]
[    0.307145] pnp 00:02: [io  0x0080]
[    0.307146] pnp 00:02: [io  0x0092]
[    0.307148] pnp 00:02: [io  0x00b2-0x00b3]
[    0.307150] pnp 00:02: [io  0x0063]
[    0.307152] pnp 00:02: [io  0x0065]
[    0.307154] pnp 00:02: [io  0x0067]
[    0.307156] pnp 00:02: [io  0x0600-0x060f]
[    0.307158] pnp 00:02: [io  0x0610]
[    0.307159] pnp 00:02: [io  0x0800-0x080f]
[    0.307161] pnp 00:02: [io  0x0810-0x0817]
[    0.307163] pnp 00:02: [io  0x0820-0x0823]
[    0.307165] pnp 00:02: [io  0x0400-0x047f]
[    0.307166] pnp 00:02: [io  0x0500-0x053f]
[    0.307168] pnp 00:02: [io  0x0380-0x0387]
[    0.307170] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[    0.307172] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[    0.307174] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[    0.307176] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[    0.307178] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[    0.307180] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.307182] pnp 00:02: [mem 0xfed20000-0xfed3ffff]
[    0.307184] pnp 00:02: [mem 0xfed40000-0xfed44fff]
[    0.307185] pnp 00:02: [mem 0xfed45000-0xfed8ffff]
[    0.307187] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.307268] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.307272] system 00:02: [io  0x0600-0x060f] has been reserved
[    0.307275] system 00:02: [io  0x0610] has been reserved
[    0.307278] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.307280] system 00:02: [io  0x0810-0x0817] has been reserved
[    0.307283] system 00:02: [io  0x0820-0x0823] has been reserved
[    0.307285] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.307288] system 00:02: [io  0x0500-0x053f] has been reserved
[    0.307291] system 00:02: [io  0x0380-0x0387] has been reserved
[    0.307294] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.307296] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.307299] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.307302] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.307305] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.307308] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.307311] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.307313] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.307317] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.307320] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.307323] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.307333] pnp 00:03: [io  0x0000-0x001f]
[    0.307335] pnp 00:03: [io  0x0081-0x0091]
[    0.307337] pnp 00:03: [io  0x0093-0x009f]
[    0.307339] pnp 00:03: [io  0x00c0-0x00df]
[    0.307341] pnp 00:03: [dma 4]
[    0.307374] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.307400] pnp 00:04: [io  0x0070-0x0077]
[    0.307434] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.307505] pnp 00:05: [irq 0 disabled]
[    0.307517] pnp 00:05: [irq 8]
[    0.307519] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.307553] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.307565] pnp 00:06: [io  0x00f0]
[    0.307572] pnp 00:06: [irq 13]
[    0.307607] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.307618] pnp 00:07: [mem 0xff800000-0xffffffff]
[    0.307653] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[    0.307670] pnp 00:08: [io  0x0060]
[    0.307672] pnp 00:08: [io  0x0064]
[    0.307677] pnp 00:08: [irq 1]
[    0.307719] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.307739] pnp 00:09: [irq 12]
[    0.307782] pnp 00:09: Plug and Play ACPI device, IDs SYN1e2f SYN1e00 SYN0002 PNP0f13 (active)
[    0.307976] pnp: PnP ACPI: found 10 devices
[    0.307978] ACPI: ACPI bus type pnp unregistered
[    0.314985] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.314990] PCI: max bus depth: 1 pci_try_num: 2
[    0.315023] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.315026] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.315031] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd44fffff]
[    0.315035] pci 0000:00:1c.0:   bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.315044] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1420000-0xd142ffff pref]
[    0.315047] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.315050] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.315054] pci 0000:00:1c.1:   bridge window [mem 0xd2500000-0xd34fffff]
[    0.315059] pci 0000:00:1c.1:   bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.315065] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.315094] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.315099] pci 0000:00:1c.0: setting latency timer to 64
[    0.315109] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.315113] pci 0000:00:1c.1: setting latency timer to 64
[    0.315120] pci 0000:00:1e.0: setting latency timer to 64
[    0.315124] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.315126] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.315129] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.315131] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.315133] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.315135] pci_bus 0000:02: resource 1 [mem 0xd3500000-0xd44fffff]
[    0.315138] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.315140] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.315142] pci_bus 0000:03: resource 1 [mem 0xd2500000-0xd34fffff]
[    0.315144] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.315147] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.315149] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.315151] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.315153] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.315220] NET: Registered protocol family 2
[    0.315379] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.316779] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.322157] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.322815] TCP: Hash tables configured (established 524288 bind 65536)
[    0.322818] TCP reno registered
[    0.322838] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.322894] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.323109] NET: Registered protocol family 1
[    0.323132] pci 0000:00:02.0: Boot video device
[    0.323153] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.323172] pci 0000:00:1a.0: PCI INT A disabled
[    0.323191] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.323208] pci 0000:00:1a.1: PCI INT B disabled
[    0.323221] pci 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.340024] pci 0000:00:1a.7: PCI INT D disabled
[    0.340045] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.340062] pci 0000:00:1d.0: PCI INT A disabled
[    0.340071] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.340088] pci 0000:00:1d.1: PCI INT B disabled
[    0.340097] pci 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.340115] pci 0000:00:1d.2: PCI INT D disabled
[    0.340125] pci 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.340143] pci 0000:00:1d.3: PCI INT C disabled
[    0.340153] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.356021] pci 0000:00:1d.7: PCI INT A disabled
[    0.356045] PCI: CLS 64 bytes, default 64
[    0.356104] Unpacking initramfs...
[    0.590329] Freeing initrd memory: 10036k freed
[    0.595255] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.595258] Simple Boot Flag at 0x44 set to 0x1
[    0.595747] audit: initializing netlink socket (disabled)
[    0.595762] type=2000 audit(1348686325.588:1): initialized
[    0.616365] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.634766] VFS: Disk quotas dquot_6.5.2
[    0.634803] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.634876] msgmni has been set to 5904
[    0.635040] alg: No test for stdrng (krng)
[    0.635075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.635078] io scheduler noop registered
[    0.635080] io scheduler deadline registered
[    0.635094] io scheduler cfq registered (default)
[    0.635188] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.635241] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.635337] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.635382] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.635500] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.635503] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.635508] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.635528] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.635530] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.635534] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.635552] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.635577] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.635579] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.635904] intel_idle: does not run on family 6 model 23
[    0.635933] ERST: Table is not found!
[    0.635935] GHES: HEST is not enabled!
[    0.636027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.684420] Linux agpgart interface v0.103
[    0.684508] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    0.684592] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.685121] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    0.685253] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.685383] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.699834] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.699841] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.699976] mousedev: PS/2 mouse device common for all mice
[    0.701851] rtc_cmos 00:04: RTC can wake from S4
[    0.701968] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.701996] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.702007] cpuidle: using governor ladder
[    0.702008] cpuidle: using governor menu
[    0.702207] TCP cubic registered
[    0.702249] NET: Registered protocol family 10
[    0.702707] Mobile IPv6
[    0.702710] NET: Registered protocol family 17
[    0.702714] Registering the dns_resolver key type
[    0.702845] PM: Hibernation image not present or could not be loaded.
[    0.702855] registered taskstats version 1
[    0.712416] rtc_cmos 00:04: setting system clock to 2012-09-26 19:05:26 UTC (1348686326)
[    0.712483] Initializing network drop monitor service
[    0.713882] Freeing unused kernel memory: 612k freed
[    0.714042] Write protecting the kernel read-only data: 6144k
[    0.716222] Freeing unused kernel memory: 560k freed
[    0.719094] Freeing unused kernel memory: 716k freed
[    0.726091] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.734812] udev[49]: starting version 164
[    0.759525] usbcore: registered new interface driver usbfs
[    0.759557] usbcore: registered new interface driver hub
[    0.770922] SCSI subsystem initialized
[    0.778174] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.778209] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.778241] r8169 0000:03:00.0: setting latency timer to 64
[    0.778309] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.778773] r8169 0000:03:00.0: eth0: RTL8102e at 0xffffc9000062c000, c8:0a:a9:b1:c4:46, XID 04e00000 IRQ 42
[    0.807169] usbcore: registered new device driver usb
[    0.807731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.807763] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.807785] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.807789] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.807814] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.807845] ehci_hcd 0000:00:1a.7: debug port 1
[    0.809264] [Firmware Bug]: Invalid critical threshold (0)
[    0.811729] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.811789] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd4505c00
[    0.816497] thermal LNXTHERM:00: registered as thermal_zone0
[    0.816500] ACPI: Thermal Zone [TZ01] (30 C)
[    0.822565] libata version 3.00 loaded.
[    0.824035] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.824083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.824086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824088] usb usb1: Product: EHCI Host Controller
[    0.824090] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 ehci_hcd
[    0.824092] usb usb1: SerialNumber: 0000:00:1a.7
[    0.824217] hub 1-0:1.0: USB hub found
[    0.824224] hub 1-0:1.0: 4 ports detected
[    0.824320] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.824346] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.824349] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.824364] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.824397] ehci_hcd 0000:00:1d.7: debug port 1
[    0.828296] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.828319] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd4505800
[    0.844019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.844052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.844055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.844057] usb usb2: Product: EHCI Host Controller
[    0.844059] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 ehci_hcd
[    0.844061] usb usb2: SerialNumber: 0000:00:1d.7
[    0.844197] hub 2-0:1.0: USB hub found
[    0.844203] hub 2-0:1.0: 8 ports detected
[    0.844302] ahci 0000:00:1f.2: version 3.0
[    0.844319] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.844387] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.844451] ahci: SSS flag set, parallel bus scan disabled
[    0.844489] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.844493] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    0.844498] ahci 0000:00:1f.2: setting latency timer to 64
[    0.844919] uhci_hcd: USB Universal Host Controller Interface driver
[    0.868643] scsi0 : ahci
[    0.868759] scsi1 : ahci
[    0.868838] scsi2 : ahci
[    0.868912] scsi3 : ahci
[    0.868983] scsi4 : ahci
[    0.869056] scsi5 : ahci
[    0.869232] ata1: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505100 irq 43
[    0.869236] ata2: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505180 irq 43
[    0.869238] ata3: DUMMY
[    0.869239] ata4: DUMMY
[    0.869242] ata5: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505300 irq 43
[    0.869245] ata6: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505380 irq 43
[    0.869283] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.869298] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.869302] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.869325] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.869370] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[    0.869416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.869419] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.869421] usb usb3: Product: UHCI Host Controller
[    0.869423] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.869424] usb usb3: SerialNumber: 0000:00:1a.0
[    0.869572] hub 3-0:1.0: USB hub found
[    0.869579] hub 3-0:1.0: 2 ports detected
[    0.869665] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.869673] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.869677] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.869687] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.869726] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[    0.869763] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.869765] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.869767] usb usb4: Product: UHCI Host Controller
[    0.869769] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.869771] usb usb4: SerialNumber: 0000:00:1a.1
[    0.869895] hub 4-0:1.0: USB hub found
[    0.869899] hub 4-0:1.0: 2 ports detected
[    0.869974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.869982] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.869985] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.869992] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.870019] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
[    0.870055] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870058] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870060] usb usb5: Product: UHCI Host Controller
[    0.870062] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.870064] usb usb5: SerialNumber: 0000:00:1d.0
[    0.870170] hub 5-0:1.0: USB hub found
[    0.870174] hub 5-0:1.0: 2 ports detected
[    0.870245] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.870253] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.870256] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.870263] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.870291] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[    0.870324] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870327] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870329] usb usb6: Product: UHCI Host Controller
[    0.870330] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.870332] usb usb6: SerialNumber: 0000:00:1d.1
[    0.870437] hub 6-0:1.0: USB hub found
[    0.870441] hub 6-0:1.0: 2 ports detected
[    0.870513] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.870520] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.870523] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.870530] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.870557] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[    0.870592] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870594] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870596] usb usb7: Product: UHCI Host Controller
[    0.870598] usb usb7: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.870600] usb usb7: SerialNumber: 0000:00:1d.2
[    0.870705] hub 7-0:1.0: USB hub found
[    0.870709] hub 7-0:1.0: 2 ports detected
[    0.870777] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.870785] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.870788] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.870795] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.870833] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[    0.870869] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870871] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870873] usb usb8: Product: UHCI Host Controller
[    0.870875] usb usb8: Manufacturer: Linux 3.2.0-0.bpo.3-amd64 uhci_hcd
[    0.870877] usb usb8: SerialNumber: 0000:00:1d.3
[    0.870980] hub 8-0:1.0: USB hub found
[    0.870986] hub 8-0:1.0: 2 ports detected
[    1.136019] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.360022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.360943] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OCA1G, max UDMA/100
[    1.360946] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.362020] ata1.00: configured for UDMA/100
[    1.362152] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[    1.518976] usb 1-1: New USB device found, idVendor=0bda, idProduct=0158
[    1.518979] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.518981] usb 1-1: Product: USB2.0-CRW
[    1.518983] usb 1-1: Manufacturer: Generic
[    1.518984] usb 1-1: SerialNumber: 20071114173400000
[    1.525493] usbcore: registered new interface driver uas
[    1.592018] Refined TSC clocksource calibration: 2294.249 MHz.
[    1.592022] Switching to clocksource tsc
[    1.632013] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[    1.828859] usb 2-4: New USB device found, idVendor=064e, idProduct=f203
[    1.828862] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.828864] usb 2-4: Product: HP Webcam-101
[    1.828866] usb 2-4: Manufacturer: SuYin
[    1.828867] usb 2-4: SerialNumber: HF0317-J311-SE01-VH-R02.01.01
[    1.852017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.870913] ata2.00: ATAPI: hp       CDDVDW TS-L633N, 0300, max UDMA/100
[    1.888876] ata2.00: configured for UDMA/100
[    1.891302] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633N  0300 PQ: 0 ANSI: 5
[    2.208016] ata5: SATA link down (SStatus 0 SControl 300)
[    2.528016] ata6: SATA link down (SStatus 0 SControl 300)
[    2.529088] Initializing USB Mass Storage driver...
[    2.529174] usbcore: registered new interface driver usb-storage
[    2.529175] USB Mass Storage support registered.
[    2.535631] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.535710] sd 0:0:0:0: [sda] Write Protect is off
[    2.535713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.535746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.540387] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.540390] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.540517] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.541001] usb 1-1: USB disconnect, device number 2
[    2.544882] scsi6 : usb-storage 1-1:1.0
[    2.544979] usbcore: registered new interface driver ums-realtek
[    2.619870]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.620356] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.624390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.624457] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.401685] PM: Starting manual resume from disk
[    3.401689] PM: Hibernation image partition 8:7 present
[    3.401691] PM: Looking for hibernation image.
[    3.416787] PM: Image not found (code -22)
[    3.416789] PM: Hibernation image not present or could not be loaded.
[    3.425380] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.425383] EXT4-fs (sda1): write access will be enabled during recovery
[    3.443716] EXT4-fs (sda1): recovery complete
[    3.448290] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.554771] udev[344]: starting version 164
[    4.774584] ACPI: Requesting acpi_cpufreq
[    4.775440] Monitor-Mwait will be used to enter C-1 state
[    4.775478] Monitor-Mwait will be used to enter C-2 state
[    4.775499] Monitor-Mwait will be used to enter C-3 state
[    4.775504] Marking TSC unstable due to TSC halts in idle
[    4.775520] ACPI: acpi_idle registered with cpuidle
[    4.775689] Switching to clocksource hpet
[    4.794971] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.794978] ACPI: Power Button [PWRB]
[    4.795035] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    4.795446] ACPI: Lid Switch [LID0]
[    4.795559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.795564] ACPI: Power Button [PWRF]
[    4.925696] ACPI: Battery Slot [BAT0] (battery present)
[    4.954672] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.970843] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.067207] wmi: Mapper loaded
[    5.109270] ACPI: AC Adapter [ACAD] (on-line)
[    5.139261] [drm] Initialized drm 1.1.0 20060810
[    5.142524] cfg80211: Calling CRDA to update world regulatory domain
[    5.236104] rtl8192se 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.236123] rtl8192se 0000:02:00.0: setting latency timer to 64
[    5.247665] rtl8192se: rtl8192ce: FW Power Save off (module option)
[    5.247792] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[    5.247793] Loading firmware rtlwifi/rtl8192sefw.bin
[    5.367856] input: HP WMI hotkeys as /devices/virtual/input/input5
[    5.519299] rtl8192se:rtl92s_init_sw_vars():<0-0> Failed to request firmware!
[    5.519304] rtlwifi:rtl_pci_probe():<0-0> Can't init_sw_vars.
[    5.519337] rtl8192se 0000:02:00.0: PCI INT A disabled
[    5.602965] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.602970] i915 0000:00:02.0: setting latency timer to 64
[    5.640415] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    5.640422] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.640423] [drm] Driver supports precise vblank timestamp query.
[    5.640462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.643166] Linux media interface: v0.10
[    5.655093] Linux video capture interface: v2.00
[    5.656920] uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:f203)
[    5.663446] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6
[    5.663553] usbcore: registered new interface driver uvcvideo
[    5.663555] USB Video Class driver (1.1.1)
[    5.693683] fixme: max PWM is zero.
[    6.046254] fbcon: inteldrmfb (fb0) is primary device
[    6.060418] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
[    6.135567] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    6.334905] Console: switching to colour frame buffer device 170x48
[    6.337636] fb0: inteldrmfb frame buffer device
[    6.337637] drm: registered panic notifier
[    6.342667] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dswload2-316)
[    6.342673] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110623/psloop-231)
[    6.342677] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03.GBQC] (Node ffff8800bae7b8a8), AE_ALREADY_EXISTS (20110623/psparse-536)
[    6.342685] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[    6.342689] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03._BQC] (Node ffff8800bae7b8d0), AE_ALREADY_EXISTS (20110623/psparse-536)
[    6.342694] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[    6.342699] ACPI Warning: Evaluating _BQC failed (20110623/video-483)
[    6.344892] acpi device:03: registered as cooling_device2
[    6.345209] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    6.345316] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    6.345552] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.345616] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.345690] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    6.345723] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.571642] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    6.595589] HDMI status: Codec=3 Pin=3 Presence_Detect=0 ELD_Valid=0
[    6.595783] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.596056] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.596139] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.978701] Adding 5905404k swap on /dev/sda7.  Priority:-1 extents:1 across:5905404k 
[    6.985084] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.473349] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.554577] loop: module loaded
[    9.490464] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    9.549398] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    9.603451] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.744118] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   10.643349] fuse init (API version 7.17)
[   11.554461] vboxdrv: Found 2 processor cores.
[   11.554699] vboxdrv: fAsync=0 offMin=0x187 offMax=0x3a89
[   11.555198] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   11.555202] vboxdrv: Successfully loaded version 4.0.10_Debian (interface 0x00180000).
[   12.909209] r8169 0000:03:00.0: eth0: link down
[   12.909759] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.986551] Bluetooth: Core ver 2.16
[   14.986582] NET: Registered protocol family 31
[   14.986584] Bluetooth: HCI device and connection manager initialized
[   14.986587] Bluetooth: HCI socket layer initialized
[   14.986589] Bluetooth: L2CAP socket layer initialized
[   14.986595] Bluetooth: SCO socket layer initialized
[   15.025957] Bluetooth: RFCOMM TTY layer initialized
[   15.025962] Bluetooth: RFCOMM socket layer initialized
[   15.025964] Bluetooth: RFCOMM ver 1.11
[   15.089106] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.089109] Bluetooth: BNEP filters: protocol multicast
[   15.110462] Bridge firewalling registered
[  102.973709] r8169 0000:03:00.0: eth0: link up
[  102.974680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Offline

Pages: 1

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo