You are not logged in.
- Topics: Active | Unanswered
#1 2011-10-20 16:27:27
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Acer d257 intel n-100 series wifi
Hello,
I've installed crunchbang linux two days ago and it's awesome, but i can not install wifi card on my lappy. I installed debian many timesbefore, but never had trouble with it. I've installed iwlwifi and wicd-curses and rebooted many times, but i cant initialize wlan0. It is not even listed in iwconfig.
I dont know what to do next. I can't use my lappy properly without internet 
But I like this distro so much so I want to stick with it. I've been working on it since yesterday googling whole day but still nothing, so I beg of you, any help?
I am linux noob, but very big fan of it.
Ty for any response! 
Offline
Be excellent to each other!
#2 2011-10-20 16:34:54
- chaanakya
- #! Die Hard
- Registered: 2010-12-30
- Posts: 940
Re: Acer d257 intel n-100 series wifi
You said you've installed firmware-iwlwifi. Try doing
sudo modprobe iwlagnand see if that gets you anywhere.
Last edited by chaanakya (2011-10-20 16:36:25)
Check out Musik - an easy-to-use text-to-music converter!
Join SpiderOak using this link and get an extra 1 GB free: https://spideroak.com/download/referral … 660e787ff1
Offline
#3 2011-10-20 17:44:22
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Re: Acer d257 intel n-100 series wifi
If I use this command and I enter my password, it just skips the line and does nothing
Here goes the screenshot:
Uploaded with ImageShack.us
Last edited by Shomid (2011-10-20 17:51:05)
Offline
#4 2011-10-20 18:43:56
- xaos52
- The Good Doctor
- From: Planet of the @s
- Registered: 2011-06-24
- Posts: 4,602
Re: Acer d257 intel n-100 series wifi
Post output of
dmesgplease
bootinfoscript - emacs primer - wireless problems- I ♥ #!
Offline
#5 2011-10-20 19:14:56
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Re: Acer d257 intel n-100 series wifi
Here it is:
Linux version 2.6.36-2.dmz.5-liquorix-amd64 (Debian 2.6.36-25) (damentz@gmail.com) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 ZEN SMP PREEMPT Tue Dec 14 20:40:25 CST 2010
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-2.dmz.5-liquorix-amd64 root=UUID=0eb8101f-aee8-43c1-bba9-673936241f23 ro quiet splash
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f43f000 (usable)
BIOS-e820: 000000003f43f000 - 000000003f4bf000 (reserved)
BIOS-e820: 000000003f4bf000 - 000000003f5bf000 (ACPI NVS)
BIOS-e820: 000000003f5bf000 - 000000003f5ff000 (ACPI data)
BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable)
BIOS-e820: 000000003f600000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x3f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask FE0000000 write-back
2 base 020000000 mask FE0000000 write-back
3 base 03F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000003f600000
0000000000 - 003f600000 page 2M
kernel direct mapping tables up to 3f600000 @ 8000-a000
RAMDISK: 2e739000 - 2f76f000
ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 000000003f5fe120 00074 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 000000003f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 000000003f5f1000 08569 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FACS 000000003f583000 00040
ACPI: HPET 000000003f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 000000003f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 000000003f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC 000000003f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 000000003f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 000000003f5ee000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000003f5ed000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000003f5ec000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: WDAT 000000003f5eb000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000003f600000
Initmem setup node 0 0000000000000000-000000003f600000
NODE_DATA [00000000017af200 - 00000000017b41ff]
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x0003f43f
0: 0x0003f5ff -> 0x0003f600
On node 0 totalpages: 259038
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3942 pages, LIFO batch:0
DMA32 zone: 3493 pages used for memmap
DMA32 zone: 251547 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [7000 - 77ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000003f43f000 - 000000003f4bf000
PM: Registered nosave memory: 000000003f4bf000 - 000000003f5bf000
PM: Registered nosave memory: 000000003f5bf000 - 000000003f5ff000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001800000 s82496 r8192 d24000 u524288
pcpu-alloc: s82496 r8192 d24000 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 255489
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-2.dmz.5-liquorix-amd64 root=UUID=0eb8101f-aee8-43c1-bba9-673936241f23 ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (50 early reservations)
#1 [0001000000 - 00017ae1c8] TEXT DATA BSS
#2 [002e739000 - 002f76f000] RAMDISK
#3 [000009f800 - 0000100000] BIOS reserved
#4 [00017af000 - 00017af1e4] BRK
#5 [0000001000 - 0000003000] TRAMPOLINE
#6 [0000003000 - 0000007000] ACPI WAKEUP
#7 [00017af200 - 00017b4200] NODE_DATA
#8 [00017b4200 - 00017b5200] BOOTMEM
#9 [00017ae200 - 00017ae2c0] BOOTMEM
#10 [0001fb6000 - 0001fb7000] BOOTMEM
#11 [0001fb7000 - 0001fb8000] BOOTMEM
#12 [0002000000 - 0002e00000] MEMMAP 0
#13 [00017ae2c0 - 00017ae440] BOOTMEM
#14 [00017b5200 - 00017bb200] BOOTMEM
#15 [00017bc000 - 00017bd000] BOOTMEM
#16 [00017ae440 - 00017ae481] BOOTMEM
#17 [00017ae4c0 - 00017ae503] BOOTMEM
#18 [00017ae540 - 00017ae8c0] BOOTMEM
#19 [00017ae8c0 - 00017ae928] BOOTMEM
#20 [00017ae940 - 00017ae9a8] BOOTMEM
#21 [00017ae9c0 - 00017aea28] BOOTMEM
#22 [00017aea40 - 00017aeaa8] BOOTMEM
#23 [00017aeac0 - 00017aeb28] BOOTMEM
#24 [00017aeb40 - 00017aeba8] BOOTMEM
#25 [00017aebc0 - 00017aec28] BOOTMEM
#26 [00017aec40 - 00017aeca8] BOOTMEM
#27 [00017aecc0 - 00017aed28] BOOTMEM
#28 [00017aed40 - 00017aeda8] BOOTMEM
#29 [00017aedc0 - 00017aee28] BOOTMEM
#30 [00017aee40 - 00017aeea8] BOOTMEM
#31 [00017aeec0 - 00017aef28] BOOTMEM
#32 [00017aef40 - 00017aefa8] BOOTMEM
#33 [00017bb200 - 00017bb268] BOOTMEM
#34 [00017aefc0 - 00017aefe0] BOOTMEM
#35 [00017bb280 - 00017bb2a0] BOOTMEM
#36 [00017bb2c0 - 00017bb336] BOOTMEM
#37 [00017bb340 - 00017bb3b6] BOOTMEM
#38 [0001800000 - 000181c000] BOOTMEM
#39 [0001880000 - 000189c000] BOOTMEM
#40 [0001900000 - 000191c000] BOOTMEM
#41 [0001980000 - 000199c000] BOOTMEM
#42 [00017bb3c0 - 00017bb3c8] BOOTMEM
#43 [00017bb400 - 00017bb408] BOOTMEM
#44 [00017bb440 - 00017bb450] BOOTMEM
#45 [00017bb480 - 00017bb4a0] BOOTMEM
#46 [00017bb4c0 - 00017bb5f0] BOOTMEM
#47 [00017bb600 - 00017bb650] BOOTMEM
#48 [00017bb680 - 00017bb6d0] BOOTMEM
#49 [00017bd000 - 00017c5000] BOOTMEM
Memory: 996780k/1038336k available (3914k kernel code, 2184k absent, 39372k reserved, 2414k data, 628k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1662.458 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.91 BogoMIPS (lpj=1662458)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz stepping 0a
Booting Node 0, Processors #1 #2 #3 Ok.
TSC synchronization [CPU#0 -> CPU#3]:
Measured 70 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 4 CPUs
Total of 4 processors activated (13300.51 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000003f497810 00789 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00789 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: SSDT 000000003f496c10 001C3 (v02 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001C3 (v02 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 000000003f496e10 001B5 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B5 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 000000003f495f10 000C9 (v02 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C9 (v02 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
pci 0000:00:02.0: reg 10: [mem 0x56180000-0x561fffff]
pci 0000:00:02.0: reg 14: [io 0x40a0-0x40a7]
pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x56000000-0x560fffff]
pci 0000:00:02.1: reg 10: [mem 0x56100000-0x5617ffff]
pci 0000:00:1b.0: reg 10: [mem 0x56200000-0x56203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.1: reg 20: [io 0x4040-0x405f]
pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
pci 0000:00:1d.7: reg 10: [mem 0x56205000-0x562053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x4098-0x409f]
pci 0000:00:1f.2: reg 14: [io 0x40ac-0x40af]
pci 0000:00:1f.2: reg 18: [io 0x4090-0x4097]
pci 0000:00:1f.2: reg 1c: [io 0x40a8-0x40ab]
pci 0000:00:1f.2: reg 20: [io 0x4080-0x408f]
pci 0000:00:1f.2: reg 24: [mem 0x56204000-0x562043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 18: [mem 0x50004000-0x50004fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0x50000000-0x50003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x55000000-0x55ffffff]
pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0x54000000-0x54001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0x54000000-0x54ffffff]
pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0x53000000-0x53000fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x53000000-0x53ffffff]
pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000003f43f000 - 000000003fffffff
reserve RAM buffer: 000000003f600000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0600-0x060f] has been reserved
system 00:01: [io 0x0610] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0810-0x0817] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x55000000-0x55ffffff]
pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0x54000000-0x54ffffff]
pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x53000000-0x53ffffff]
pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0x55000000-0x55ffffff]
pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x54000000-0x54ffffff]
pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x53000000-0x53ffffff]
pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16600k freed
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1319144518.205:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1979
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1c
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1c
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
Linux agpgart interface v0.103
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
XENFS: not registering filesystem on non-xen platform
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Fixed MDIO Bus: probed
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP vegas registered
TCP yeah registered
Registering the dns_resolver key type
TuxOnIce core not loaded yet.
registered taskstats version 1
Freeing unused kernel memory: 628k freed
CFS CPU scheduler.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[554]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56205000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8101e at 0xffffc9001055a000, e8:9a:8f:94:eb:7b, XID 00a00000 IRQ 43
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.36-2.dmz.5-liquorix-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x56204000 port 0x56204100 irq 44
ata2: SATA max UDMA/133 abar m1024@0x56204000 port 0x56204180 irq 44
ata3: DUMMY
ata4: DUMMY
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
usb 1-3: new high speed USB device using ehci_hcd and address 2
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] set up 7M of stolen space
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
usb 1-3: New USB device found, idVendor=04f2, idProduct=b209
usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-3: Product: WebCam
usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (4)
ata1.00: ATA-8: WDC WD3200BPVT-22ZEST0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (4)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
fbcon: inteldrmfb (fb0) is primary device
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:27: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
PM: Starting manual resume from disk
TuxOnIce core not loaded yet.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
CE: hpet increased min_delta_ns to 7500 nsec
udev[833]: starting version 164
ACPI: acpi_idle yielding to intel_idle
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Linux video capture interface: v2.00
ACPI: WMI: Mapper loaded
uvcvideo: Found UVC 1.00 device WebCam (04f2:b209)
input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: PC Speaker as /devices/platform/pcspkr/input/input7
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC269: SKU not ready 0x598301f0
hda_codec: ALC259: BIOS auto-probing.
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Adding 1979388k swap on /dev/sda6. Priority:-1 extents:1 across:1979388k
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
fuse init (API version 7.15)
r8169 0000:01:00.0: eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 17
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
Stopping fuse filesystems.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Stopping normal filesystems.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
uhci_hcd 0000:00:1d.3: PCI INT D disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of devices complete after 729.530 msecs
r8169 0000:01:00.0: PME# enabled
pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 22.010 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
SMP alternatives: switching to UP code
Back to C!
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20001010, writing 0x1010)
pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
pci 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
pci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
PM: early resume of devices complete after 1.180 msecs
i915 0000:00:02.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
usb usb4: root hub lost power or was reset
ahci 0000:00:1f.2: setting latency timer to 64
pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
r8169 0000:01:00.0: PME# disabled
sd 0:0:0:0: [sda] Starting disk
r8169 0000:01:00.0: eth0: link down
usb 1-3: reset high speed USB device using ehci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
r8169 0000:01:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (4)
ata1.00: unexpected _GTF length (4)
ata1.00: configured for UDMA/133
PM: resume of devices complete after 2799.390 msecs
Restarting all filesystems ...
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
r8169 0000:01:00.0: eth0: link up
r8169 0000:01:00.0: eth0: link up
eth0: no IPv6 routers presentOffline
#6 2011-10-20 19:27:32
- xaos52
- The Good Doctor
- From: Planet of the @s
- Registered: 2011-06-24
- Posts: 4,602
Re: Acer d257 intel n-100 series wifi
No sign of wireless in dmesg.
can you post
lspci -knn
lsusb -voutput.
bootinfoscript - emacs primer - wireless problems- I ♥ #!
Offline
#7 2011-10-20 19:52:18
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Re: Acer d257 intel n-100 series wifi
I surely have wifi and it works, i've tried it in live cd of ubunutu.
Anyway thanks for you help, I really appreciate it and here is the log:
shomid@netbook:~$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Intel Corporation WiFi 100 Series [8086:08ae]
Subsystem: Intel Corporation Device [8086:1005]
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0590]
shomid@netbook:~$ lsusb -v
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 002: ID 04f2:b209 Chicony Electronics Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x04f2 Chicony Electronics Co., Ltd
idProduct 0xb209
bcdDevice 82.57
iManufacturer 3
iProduct 1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 411
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 1
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 85
dwClockFrequency 30.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x00000004
Auto-Exposure Priority
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 6
iTerminal 0
VideoControl Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 4 (SELECTOR_UNIT)
bUnitID 4
bNrInPins 1
baSource( 0) 1
iSelector 0
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 5
bSourceID 4
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000053f
Brightness
Contrast
Hue
Saturation
Sharpness
Gamma
Backlight Compensation
Power Line Frequency
iProcessing 0
bmVideoStandards 0x1b
None
NTSC - 525/60
SECAM - 625/50
NTSC - 625/50
VideoControl Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 6
guidExtensionCode {564c97a7-7ea7-904b-8cbf-1c71ec303000}
bNumControl 16
bNrPins 1
baSourceID( 0) 5
bControlSize 2
bmControls( 0) 0xff
bmControls( 1) 0xff
iExtension 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 231
bEndPointAddress 129
bmInfo 0
bTerminalLink 3
bStillCaptureMethod 0
bTriggerSupport 0
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 5
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 49152000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 12288000
dwMaxBitRate 36864000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 3072000
dwMaxBitRate 9216000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 16220160
dwMaxBitRate 48660480
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 4055040
dwMaxBitRate 12165120
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)Offline
#8 2011-10-20 20:07:33
- el_koraco
- #!/loony/bun
- From: inside Ed
- Registered: 2011-07-25
- Posts: 4,749
Re: Acer d257 intel n-100 series wifi
Stupid question, after you modprobed the firmware, did you bring up your wireless interface? Enter these commands and post the entire output after the last command.
sudo modprobe iwlagn
sudo ifconfig pan0 up
sudo iwconfigIt's normal that you don't get any messages after modprobe, that's to be expected.
Last edited by el_koraco (2011-10-20 20:10:14)
Offline
#9 2011-10-20 20:49:29
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Re: Acer d257 intel n-100 series wifi
no, it makes no difference, here is what it does:
shomid@netbook:~$ sudo modprobe iwlagn
[sudo] password for shomid:
shomid@netbook:~$ sudo ifconfig pan0 up
shomid@netbook:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
shomid@netbook:~$ still no wlan0 to set up
Offline
#10 2011-10-20 21:02:23
- el_koraco
- #!/loony/bun
- From: inside Ed
- Registered: 2011-07-25
- Posts: 4,749
Re: Acer d257 intel n-100 series wifi
Try
sudo ifconfig wlan0 up
after the modprobe, then run sudo iwconfig again.
Offline
#11 2011-10-20 21:19:46
- Shomid
- Member
- Registered: 2011-10-20
- Posts: 16
Re: Acer d257 intel n-100 series wifi
Ok i did this, but friend of mine fiured out, that this wifi card is supported in kernel v2.6.38 and higher. So i had to install debian kernel.
wget http://ftp.cz.debian.org/debian/pool/main/l/linux-2.6/linux-headers-3.0.0-1-amd64_3.0.0-4_amd64.deb so i think i will have to go on with that kernel until next release.
Anyway I really appreciate ur help
Last edited by Shomid (2011-10-20 21:20:26)
Offline
#12 2011-10-20 23:02:26
- el_koraco
- #!/loony/bun
- From: inside Ed
- Registered: 2011-07-25
- Posts: 4,749
Re: Acer d257 intel n-100 series wifi
You can just install the 2.6.39 kernel from the backports repository. Uncomment it in /etc/apt/sources.list, check my sig, apply it, and find and install the kernel and headers in synaptic.
Offline
#13 2011-10-21 02:52:52
- demarsjcd
- #! Member
- Registered: 2011-09-28
- Posts: 94
Re: Acer d257 intel n-100 series wifi
thats weird. I have installeded kernal 2.6.32-5-amd64 and the wifi has worked "out of the box"
Offline
#14 2012-01-07 15:55:24
- YongQing
- New Member
- Registered: 2012-01-07
- Posts: 3
Re: Acer d257 intel n-100 series wifi
Shomid wrote:
Ok i did this, but friend of mine fiured out, that this wifi card is supported in kernel v2.6.38 and higher. So i had to install debian kernel.
wget http://ftp.cz.debian.org/debian/pool/main/l/linux-2.6/linux-headers-3.0.0-1-amd64_3.0.0-4_amd64.debso i think i will have to go on with that kernel until next release.
Anyway I really appreciate ur help
hi
linux newbie here. how do i install a newer kernel?
-edit-
figured it out.
http://ftp.cz.debian.org/debian/pool/main/l/linux-2.6/
I installed linux-image-3.1.0-1-686-pae_3.1.6-1_i386.deb then linux-headers-3.1.0-1-686-pae_3.1.6-1_i386.deb
now wireless is working
Last edited by YongQing (2012-01-07 16:33:59)
Offline
Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.
