SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 2013-05-18 01:50:56

plenty
New Member
From: Brighton, United Kingdom
Registered: 2013-05-16
Posts: 9

SOLVED: Realtek r8168/r8169 no Ethernet!

loop
lp
rtc
r8168

Last edited by plenty (2013-05-19 17:59:39)

Offline

Help fund CrunchBang, donate to the project!

#2 2013-05-18 10:45:35

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

You have tried all sorts of things and 'muddled the waters'...

My advice is to re-install, thus establishing a pristine situation.

Post output of

dmesg
lspci -knn | grep -EiA2 'net'

.
Let's take it from there.

Last edited by xaos52 (2013-05-18 10:46:03)

Offline

#3 2013-05-18 15:35:04

plenty
New Member
From: Brighton, United Kingdom
Registered: 2013-05-16
Posts: 9

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

Hey Doc, thanx loads for your interest - it's much appreciated!!

Here is the output from 'lscpi -knn | grep -EiA2 'net'..

plenty@plenty-plentybox:~$ lspci -knn | grep -EiA2 'net'
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
	Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000]
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
plenty@plenty-plentybox:~$ 

Now brace yourself for all the discharge from dmesg..

plenty@plenty-plentybox:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=8ddc98a8-f006-43af-a897-967549f394f6 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000ddbe0000 (usable)
[    0.000000]  BIOS-e820: 00000000ddbe0000 - 00000000ddbe3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ddbe3000 - 00000000ddbf0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000ddbf0000 - 00000000ddc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H57M-USB3/H57M-USB3, BIOS F5 02/12/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0DE000000 mask FFE000000 uncachable
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000de000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xddbe0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5750] f5750
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000ddbe0000
[    0.000000]  0000000000 - 00dda00000 page 2M
[    0.000000]  00dda00000 - 00ddbe0000 page 4k
[    0.000000] kernel direct mapping tables up to ddbe0000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ ddbde000-ddbe0000
[    0.000000] RAMDISK: 36b4e000 - 3759f000
[    0.000000] ACPI: RSDP 00000000000f7110 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000ddbe3040 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000ddbe30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000ddbe3180 054D2 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000ddbe0000 00040
[    0.000000] ACPI: HPET 00000000ddbe87c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000ddbe8840 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: EUDS 00000000ddbe8880 004D0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000ddbe8d50 00A4A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000ddbe86c0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000ddbe97a0 015A0 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [000000011fffb000 - 000000011fffffff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000ddbe0
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 1039213
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 889880 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129280 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000ddbe0000 - 00000000ddbe3000
[    0.000000] PM: Registered nosave memory: 00000000ddbe3000 - 00000000ddbf0000
[    0.000000] PM: Registered nosave memory: 00000000ddbf0000 - 00000000ddc00000
[    0.000000] PM: Registered nosave memory: 00000000ddc00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at ddc00000 (gap: ddc00000:12400000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82944 r8192 d23552 u262144
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1023080
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=8ddc98a8-f006-43af-a897-967549f394f6 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4011416k/4718592k available (3420k kernel code, 561740k absent, 145436k reserved, 3318k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2666.612 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.22 BogoMIPS (lpj=10666448)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000036] Security Framework initialized
[    0.000039] AppArmor: AppArmor disabled by boot time parameter
[    0.000241] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000989] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001297] Mount-cache hash table entries: 256
[    0.001385] Initializing cgroup subsys cpuacct
[    0.001389] Initializing cgroup subsys memory
[    0.001397] Initializing cgroup subsys devices
[    0.001400] Initializing cgroup subsys freezer
[    0.001401] Initializing cgroup subsys net_cls
[    0.001403] Initializing cgroup subsys blkio
[    0.001408] Initializing cgroup subsys perf_event
[    0.001428] CPU: Physical Processor ID: 0
[    0.001430] CPU: Processor Core ID: 0
[    0.001434] mce: CPU supports 9 MCE banks
[    0.001442] CPU0: Thermal monitoring enabled (TM1)
[    0.001448] using mwait in idle threads.
[    0.001756] ACPI: Core revision 20110623
[    0.006324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.046007] CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
[    0.152380] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[    0.152386] ... version:                3
[    0.152387] ... bit width:              48
[    0.152388] ... generic registers:      4
[    0.152390] ... value mask:             0000ffffffffffff
[    0.152391] ... max period:             000000007fffffff
[    0.152392] ... fixed-purpose events:   3
[    0.152393] ... event mask:             000000070000000f
[    0.152549] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152635] Booting Node   0, Processors  #1
[    0.152637] smpboot cpu 1: start_ip = 98000
[    0.260489] NMI watchdog enabled, takes one hw-pmu counter.
[    0.260579]  #2
[    0.260580] smpboot cpu 2: start_ip = 98000
[    0.368425] NMI watchdog enabled, takes one hw-pmu counter.
[    0.368515]  #3
[    0.368516] smpboot cpu 3: start_ip = 98000
[    0.476459] NMI watchdog enabled, takes one hw-pmu counter.
[    0.476486] Brought up 4 CPUs
[    0.476488] Total of 4 processors activated (21332.24 BogoMIPS).
[    0.479273] devtmpfs: initialized
[    0.482559] PM: Registering ACPI NVS region at ddbe0000 (12288 bytes)
[    0.482675] print_constraints: dummy: 
[    0.482723] NET: Registered protocol family 16
[    0.482796] ACPI: bus type pci registered
[    0.482850] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.482852] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.487517] PCI: Using configuration type 1 for base access
[    0.488128] bio: create slab <bio-0> at 0
[    0.488202] ACPI: Added _OSI(Module Device)
[    0.488204] ACPI: Added _OSI(Processor Device)
[    0.488206] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.488208] ACPI: Added _OSI(Processor Aggregator Device)
[    0.488837] ACPI: EC: Look up EC in DSDT
[    0.492342] ACPI Warning: Incorrect checksum in table [TAMG] - 0xFA, should be 0xF9 (20110623/tbutils-314)
[    0.492974] ACPI: Interpreter enabled
[    0.492979] ACPI: (supports S0 S3 S4 S5)
[    0.492994] ACPI: Using IOAPIC for interrupt routing
[    0.496573] ACPI: No dock devices found.
[    0.496575] HEST: Table not found.
[    0.496577] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.496624] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.496724] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.496726] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.496728] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.496730] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.496732] pci_root PNP0A03:00: host bridge window [mem 0xddc00000-0xfebfffff]
[    0.496742] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600
[    0.496789] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[    0.496833] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.496852] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[    0.496902] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[    0.496952] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[    0.497000] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[    0.497044] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[    0.497083] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[    0.497138] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.497165] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.497254] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.497281] pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03
[    0.497319] pci 0000:00:1a.0: reg 20: [io  0xff00-0xff1f]
[    0.497366] pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03
[    0.497407] pci 0000:00:1a.1: reg 20: [io  0xfe00-0xfe1f]
[    0.497455] pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03
[    0.497495] pci 0000:00:1a.2: reg 20: [io  0xfd00-0xfd1f]
[    0.497550] pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03
[    0.497570] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    0.497654] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.497680] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.497693] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.497755] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.497777] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.497840] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.497862] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.497925] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.497945] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.498010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.498035] pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03
[    0.498073] pci 0000:00:1d.0: reg 20: [io  0xfc00-0xfc1f]
[    0.498121] pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03
[    0.498159] pci 0000:00:1d.1: reg 20: [io  0xfb00-0xfb1f]
[    0.498206] pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03
[    0.498245] pci 0000:00:1d.2: reg 20: [io  0xfa00-0xfa1f]
[    0.498293] pci 0000:00:1d.3: [8086:3b39] type 0 class 0x000c03
[    0.498330] pci 0000:00:1d.3: reg 20: [io  0xf900-0xf91f]
[    0.498384] pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03
[    0.498403] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    0.498484] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.498505] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.498561] pci 0000:00:1f.0: [8086:3b08] type 0 class 0x000601
[    0.498675] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
[    0.498691] pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
[    0.498698] pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
[    0.498705] pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
[    0.498712] pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
[    0.498719] pci 0000:00:1f.2: reg 20: [io  0xf400-0xf41f]
[    0.498726] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
[    0.498767] pci 0000:00:1f.2: PME# supported from D3hot
[    0.498783] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.498796] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.498815] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.498874] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[    0.498883] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[    0.498892] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.498901] pci 0000:01:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[    0.498908] pci 0000:01:00.0: reg 24: [io  0xcf00-0xcf7f]
[    0.498914] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.504363] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[    0.504366] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.504369] pci 0000:00:03.0:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.504373] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.504426] pci 0000:02:00.0: [197b:2363] type 0 class 0x000101
[    0.504509] pci 0000:02:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
[    0.504570] pci 0000:02:00.0: PME# supported from D3hot
[    0.504601] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101
[    0.504623] pci 0000:02:00.1: reg 10: [io  0xef00-0xef07]
[    0.504636] pci 0000:02:00.1: reg 14: [io  0xee00-0xee03]
[    0.504649] pci 0000:02:00.1: reg 18: [io  0xed00-0xed07]
[    0.504662] pci 0000:02:00.1: reg 1c: [io  0xec00-0xec03]
[    0.504675] pci 0000:02:00.1: reg 20: [io  0xeb00-0xeb0f]
[    0.504754] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.504766] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.504769] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.504773] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.504828] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.504844] pci 0000:03:00.0: reg 10: [io  0xde00-0xdeff]
[    0.504870] pci 0000:03:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
[    0.504887] pci 0000:03:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
[    0.504898] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.504959] pci 0000:03:00.0: supports D1 D2
[    0.504961] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.512366] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.512370] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.512373] pci 0000:00:1c.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.512378] pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
[    0.512437] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[    0.512463] pci 0000:04:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit]
[    0.512591] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.520367] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.520372] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.520429] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.520437] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.520440] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.520442] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.520444] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.520446] pci 0000:00:1e.0:   bridge window [mem 0xddc00000-0xfebfffff] (subtractive decode)
[    0.520466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.520713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.520754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.520785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.520825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.520925]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.520928]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.520929] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.534364] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.534405] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.534444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.534483] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.534522] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.534562] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[    0.534601] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.534641] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.534729] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.534733] vgaarb: loaded
[    0.534734] vgaarb: bridge control possible 0000:01:00.0
[    0.534765] PCI: Using ACPI for IRQ routing
[    0.536050] PCI: Discovered peer bus 3f
[    0.536078] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600
[    0.536095] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
[    0.536112] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
[    0.536127] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
[    0.536144] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
[    0.536159] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
[    0.536175] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
[    0.536190] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
[    0.536205] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
[    0.536220] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
[    0.536235] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
[    0.536252] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
[    0.536267] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
[    0.536282] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
[    0.536297] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
[    0.536631] PCI: pci_cache_line_size set to 64 bytes
[    0.536733] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.536735] reserve RAM buffer: 00000000ddbe0000 - 00000000dfffffff 
[    0.536836] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.536843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    0.536848] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.540368] hpet: hpet2 irq 40 for MSI
[    0.540493] hpet: hpet3 irq 41 for MSI
[    0.544441] hpet: hpet4 irq 42 for MSI
[    0.548476] hpet: hpet5 irq 43 for MSI
[    0.548501] Switching to clocksource hpet
[    0.549790] pnp: PnP ACPI init
[    0.549800] ACPI: bus type pnp registered
[    0.549859] pnp 00:00: [bus 00-3f]
[    0.549861] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.549863] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.549866] pnp 00:00: [io  0x0d00-0xffff window]
[    0.549868] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.549870] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.549872] pnp 00:00: [mem 0xddc00000-0xfebfffff window]
[    0.549905] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.549982] pnp 00:01: [io  0x0010-0x001f]
[    0.549984] pnp 00:01: [io  0x0022-0x003f]
[    0.549985] pnp 00:01: [io  0x0044-0x005f]
[    0.549987] pnp 00:01: [io  0x0062-0x0063]
[    0.549988] pnp 00:01: [io  0x0065-0x006f]
[    0.549990] pnp 00:01: [io  0x0074-0x007f]
[    0.549991] pnp 00:01: [io  0x0091-0x0093]
[    0.549993] pnp 00:01: [io  0x00a2-0x00bf]
[    0.549994] pnp 00:01: [io  0x00e0-0x00ef]
[    0.549996] pnp 00:01: [io  0x04d0-0x04d1]
[    0.549997] pnp 00:01: [io  0x0290-0x029f]
[    0.549999] pnp 00:01: [io  0x0800-0x087f]
[    0.550000] pnp 00:01: [io  0x0290-0x0294]
[    0.550002] pnp 00:01: [io  0x0880-0x088f]
[    0.550057] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.550059] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.550061] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.550064] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.550066] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.550068] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550078] pnp 00:02: [dma 4]
[    0.550080] pnp 00:02: [io  0x0000-0x000f]
[    0.550082] pnp 00:02: [io  0x0080-0x0090]
[    0.550083] pnp 00:02: [io  0x0094-0x009f]
[    0.550085] pnp 00:02: [io  0x00c0-0x00df]
[    0.550107] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.550150] pnp 00:03: [irq 0 disabled]
[    0.550156] pnp 00:03: [irq 8]
[    0.550158] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.550183] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.550206] pnp 00:04: [io  0x0070-0x0073]
[    0.550231] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.550239] pnp 00:05: [io  0x0061]
[    0.550262] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.550269] pnp 00:06: [io  0x00f0-0x00ff]
[    0.550274] pnp 00:06: [irq 13]
[    0.550299] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.550463] pnp 00:07: [io  0x0400-0x04cf]
[    0.550464] pnp 00:07: [io  0x04d2-0x04ff]
[    0.550513] system 00:07: [io  0x0400-0x04cf] has been reserved
[    0.550516] system 00:07: [io  0x04d2-0x04ff] has been reserved
[    0.550518] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550682] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[    0.550736] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.550739] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550892] pnp 00:09: [mem 0x000d2000-0x000d3fff]
[    0.550894] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[    0.550896] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[    0.550897] pnp 00:09: [mem 0x000fc000-0x000fffff]
[    0.550899] pnp 00:09: [mem 0xddbe0000-0xddbfffff]
[    0.550901] pnp 00:09: [mem 0x00000000-0x0009ffff]
[    0.550902] pnp 00:09: [mem 0x00100000-0xddbdffff]
[    0.550904] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.550906] pnp 00:09: [mem 0xfed10000-0xfed1dfff]
[    0.550907] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[    0.550909] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.550911] pnp 00:09: [mem 0xffb00000-0xffb7ffff]
[    0.550912] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    0.550914] pnp 00:09: [mem 0x000e0000-0x000effff]
[    0.550977] system 00:09: [mem 0x000d2000-0x000d3fff] has been reserved
[    0.550979] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.550982] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.550984] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.550986] system 00:09: [mem 0xddbe0000-0xddbfffff] could not be reserved
[    0.550989] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.550991] system 00:09: [mem 0x00100000-0xddbdffff] could not be reserved
[    0.550994] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.550996] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.550998] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.551000] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.551003] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.551005] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.551007] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    0.551010] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.551027] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[    0.551062] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[    0.551066] pnp: PnP ACPI: found 11 devices
[    0.551068] ACPI: ACPI bus type pnp unregistered
[    0.557263] PCI: max bus depth: 1 pci_try_num: 2
[    0.557295] pci 0000:00:1c.2: BAR 15: assigned [mem 0xddc00000-0xdddfffff 64bit pref]
[    0.557298] pci 0000:00:1c.2: BAR 13: assigned [io  0x1000-0x1fff]
[    0.557301] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdde00000-0xddffffff 64bit pref]
[    0.557304] pci 0000:01:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
[    0.557306] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[    0.557308] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.557312] pci 0000:00:03.0:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.557315] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.557319] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.557321] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.557325] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.557329] pci 0000:00:1c.0:   bridge window [mem 0xdde00000-0xddffffff 64bit pref]
[    0.557334] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref]
[    0.557336] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.557338] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.557342] pci 0000:00:1c.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.557346] pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
[    0.557351] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.557353] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.557357] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.557360] pci 0000:00:1c.2:   bridge window [mem 0xddc00000-0xdddfffff 64bit pref]
[    0.557365] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.557383] pci 0000:00:03.0: setting latency timer to 64
[    0.557389] pci 0000:00:1c.0: setting latency timer to 64
[    0.557398] pci 0000:00:1c.1: setting latency timer to 64
[    0.557403] pci 0000:00:1c.2: enabling device (0006 -> 0007)
[    0.557409] pci 0000:00:1c.2: setting latency timer to 64
[    0.557415] pci 0000:00:1e.0: setting latency timer to 64
[    0.557418] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.557420] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.557422] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.557424] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.557425] pci_bus 0000:00: resource 8 [mem 0xddc00000-0xfebfffff]
[    0.557427] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.557429] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[    0.557431] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.557433] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.557434] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.557436] pci_bus 0000:02: resource 2 [mem 0xdde00000-0xddffffff 64bit pref]
[    0.557438] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.557440] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.557441] pci_bus 0000:03: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
[    0.557443] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.557445] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.557447] pci_bus 0000:04: resource 2 [mem 0xddc00000-0xdddfffff 64bit pref]
[    0.557449] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.557450] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.557452] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.557454] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.557456] pci_bus 0000:05: resource 8 [mem 0xddc00000-0xfebfffff]
[    0.557457] pci_bus 0000:3f: resource 0 [io  0x0000-0xffff]
[    0.557459] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[    0.557507] NET: Registered protocol family 2
[    0.557601] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.558215] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.560405] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.560690] TCP: Hash tables configured (established 524288 bind 65536)
[    0.560692] TCP reno registered
[    0.560699] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.560729] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.560841] NET: Registered protocol family 1
[    0.592520] pci 0000:01:00.0: Boot video device
[    0.592579] PCI: CLS 64 bytes, default 64
[    0.592616] Unpacking initramfs...
[    0.783355] Freeing initrd memory: 10564k freed
[    0.784805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.784809] Placing 64MB software IO TLB between ffff8800d9bde000 - ffff8800ddbde000
[    0.784811] software IO TLB at phys 0xd9bde000 - 0xddbde000
[    0.785219] audit: initializing netlink socket (disabled)
[    0.785228] type=2000 audit(1368843678.632:1): initialized
[    0.797344] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.797800] VFS: Disk quotas dquot_6.5.2
[    0.797824] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.797878] msgmni has been set to 7855
[    0.797988] alg: No test for stdrng (krng)
[    0.798009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.798012] io scheduler noop registered
[    0.798013] io scheduler deadline registered
[    0.798029] io scheduler cfq registered (default)
[    0.798265] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.798282] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.798284] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.798556] intel_idle: MWAIT substates: 0x1120
[    0.798561] intel_idle: v0.4 model 0x1E
[    0.798562] intel_idle: lapic_timer_reliable_states 0x2
[    0.798591] ERST: Table is not found!
[    0.798592] GHES: HEST is not enabled!
[    0.798629] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.984747] Linux agpgart interface v0.103
[    0.984861] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.018105] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.018107] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.268570] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.268656] mousedev: PS/2 mouse device common for all mice
[    1.268691] rtc_cmos 00:04: RTC can wake from S4
[    1.268791] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.268816] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.268878] cpuidle: using governor ladder
[    1.268950] cpuidle: using governor menu
[    1.269090] TCP cubic registered
[    1.269377] NET: Registered protocol family 10
[    1.270030] Mobile IPv6
[    1.270032] NET: Registered protocol family 17
[    1.270034] Registering the dns_resolver key type
[    1.270578] PM: Hibernation image not present or could not be loaded.
[    1.270600] registered taskstats version 1
[    1.271257] rtc_cmos 00:04: setting system clock to 2013-05-18 02:21:19 UTC (1368843679)
[    1.271290] Initializing network drop monitor service
[    1.272411] Freeing unused kernel memory: 576k freed
[    1.272490] Write protecting the kernel read-only data: 6144k
[    1.274653] Freeing unused kernel memory: 660k freed
[    1.276915] Freeing unused kernel memory: 680k freed
[    1.289613] udevd[59]: starting version 175
[    1.302024] usbcore: registered new interface driver usbfs
[    1.302040] usbcore: registered new interface driver hub
[    1.311658] SCSI subsystem initialized
[    1.319027] usbcore: registered new device driver usb
[    1.319328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.319364] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.319367] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.319384] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.319411] ehci_hcd 0000:00:1a.7: debug port 2
[    1.323334] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.328411] libata version 3.00 loaded.
[    1.329357] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    1.329361] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.329370] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    1.329531] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfbefe000
[    1.329590] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[    1.329595] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[    1.329599] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[    1.329603] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[    1.329607] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[    1.329696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.329698] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329700] usb usb2: Product: xHCI Host Controller
[    1.329701] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.329703] usb usb2: SerialNumber: 0000:04:00.0
[    1.329872] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    1.329897] pata_jmicron 0000:02:00.1: setting latency timer to 64
[    1.330143] xHCI xhci_add_endpoint called for root hub
[    1.330144] xHCI xhci_check_bandwidth called for root hub
[    1.330167] hub 2-0:1.0: USB hub found
[    1.330174] hub 2-0:1.0: 2 ports detected
[    1.330241] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.330245] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.332959] scsi0 : pata_jmicron
[    1.333034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.333036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.333038] usb usb3: Product: xHCI Host Controller
[    1.333039] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.333041] usb usb3: SerialNumber: 0000:04:00.0
[    1.333099] xHCI xhci_add_endpoint called for root hub
[    1.333101] xHCI xhci_check_bandwidth called for root hub
[    1.333126] hub 3-0:1.0: USB hub found
[    1.333136] hub 3-0:1.0: 2 ports detected
[    1.333280] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[    1.337172] scsi1 : pata_jmicron
[    1.337636] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[    1.337638] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[    1.340869] uhci_hcd: USB Universal Host Controller Interface driver
[    1.348695] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.348727] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.348732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.348736] usb usb1: Product: EHCI Host Controller
[    1.348740] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.348743] usb usb1: SerialNumber: 0000:00:1a.7
[    1.348941] hub 1-0:1.0: USB hub found
[    1.348946] hub 1-0:1.0: 6 ports detected
[    1.349040] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.349043] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.349049] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    1.349071] ehci_hcd 0000:00:1d.7: debug port 2
[    1.352982] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.352995] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
[    1.368777] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.368810] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.368815] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.368819] usb usb4: Product: EHCI Host Controller
[    1.368823] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.368827] usb usb4: SerialNumber: 0000:00:1d.7
[    1.369017] hub 4-0:1.0: USB hub found
[    1.369021] hub 4-0:1.0: 8 ports detected
[    1.369105] ahci 0000:00:1f.2: version 3.0
[    1.369171] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
[    1.369197] ahci: SSS flag set, parallel bus scan disabled
[    1.384828] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.384837] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
[    1.384844] ahci 0000:00:1f.2: setting latency timer to 64
[    1.425230] scsi2 : ahci
[    1.425541] scsi3 : ahci
[    1.425836] scsi4 : ahci
[    1.426135] scsi5 : ahci
[    1.426398] scsi6 : ahci
[    1.426661] scsi7 : ahci
[    1.426892] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 50
[    1.426894] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 50
[    1.426896] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 50
[    1.426899] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 50
[    1.426901] ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 50
[    1.426903] ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 50
[    1.426982] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.426985] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.426993] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    1.427036] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    1.427087] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.427089] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.427091] usb usb5: Product: UHCI Host Controller
[    1.427093] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.427094] usb usb5: SerialNumber: 0000:00:1a.0
[    1.427257] hub 5-0:1.0: USB hub found
[    1.427261] hub 5-0:1.0: 2 ports detected
[    1.427324] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.427327] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.427332] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    1.427362] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    1.427388] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.427391] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.427392] usb usb6: Product: UHCI Host Controller
[    1.427394] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.427395] usb usb6: SerialNumber: 0000:00:1a.1
[    1.427495] hub 6-0:1.0: USB hub found
[    1.427500] hub 6-0:1.0: 2 ports detected
[    1.427565] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.427567] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.427573] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    1.427594] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    1.427618] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.427620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.427622] usb usb7: Product: UHCI Host Controller
[    1.427624] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.427625] usb usb7: SerialNumber: 0000:00:1a.2
[    1.427714] hub 7-0:1.0: USB hub found
[    1.427718] hub 7-0:1.0: 2 ports detected
[    1.427784] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.427790] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.427795] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.427816] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    1.427840] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.427842] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.427844] usb usb8: Product: UHCI Host Controller
[    1.427845] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.427847] usb usb8: SerialNumber: 0000:00:1d.0
[    1.427938] hub 8-0:1.0: USB hub found
[    1.427942] hub 8-0:1.0: 2 ports detected
[    1.428009] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.428012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.428017] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.428047] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    1.428071] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.428073] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428075] usb usb9: Product: UHCI Host Controller
[    1.428077] usb usb9: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.428078] usb usb9: SerialNumber: 0000:00:1d.1
[    1.428168] hub 9-0:1.0: USB hub found
[    1.428175] hub 9-0:1.0: 2 ports detected
[    1.428238] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.428241] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.428247] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.428268] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    1.428292] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.428295] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428296] usb usb10: Product: UHCI Host Controller
[    1.428298] usb usb10: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.428299] usb usb10: SerialNumber: 0000:00:1d.2
[    1.428606] hub 10-0:1.0: USB hub found
[    1.428610] hub 10-0:1.0: 2 ports detected
[    1.428672] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.428675] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.428680] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 11
[    1.428701] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[    1.428727] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    1.428729] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428731] usb usb11: Product: UHCI Host Controller
[    1.428732] usb usb11: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    1.428734] usb usb11: SerialNumber: 0000:00:1d.3
[    1.428963] hub 11-0:1.0: USB hub found
[    1.428966] hub 11-0:1.0: 2 ports detected
[    1.440798] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.440806] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.440814] ahci 0000:02:00.0: setting latency timer to 64
[    1.441255] scsi8 : ahci
[    1.441450] scsi9 : ahci
[    1.441587] ata9: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
[    1.441591] ata10: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
[    1.744600] ata3: SATA link down (SStatus 0 SControl 300)
[    1.764699] ata10: SATA link down (SStatus 0 SControl 300)
[    1.784601] Refined TSC clocksource calibration: 2666.634 MHz.
[    1.784608] Switching to clocksource tsc
[    1.884598] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[    1.936670] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.942548] ata9.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[    1.942555] ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.948496] ata9.00: configured for UDMA/133
[    2.236597] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.239675] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[    2.243465] ata4.00: configured for UDMA/100
[    2.249545] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN01 PQ: 0 ANSI: 5
[    2.342776] usb 1-6: New USB device found, idVendor=058f, idProduct=6387
[    2.342783] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.342787] usb 1-6: Product: Mass Storage Device
[    2.342791] usb 1-6: Manufacturer: Generic
[    2.342794] usb 1-6: SerialNumber: ZXRIVKVV
[    2.345289] Initializing USB Mass Storage driver...
[    2.345576] usb-storage 1-6:1.0: Quirks match for vid 058f pid 6387: 400
[    2.345789] scsi10 : usb-storage 1-6:1.0
[    2.345888] usbcore: registered new interface driver usb-storage
[    2.345889] USB Mass Storage support registered.
[    2.452594] usb 4-4: new high-speed USB device number 2 using ehci_hcd
[    2.740592] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.746491] ata5.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[    2.746498] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.752457] ata5.00: configured for UDMA/133
[    2.752790] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
[    3.144277] usb 4-4: New USB device found, idVendor=0bda, idProduct=0158
[    3.144284] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.144288] usb 4-4: Product: USB2.0-CRW
[    3.144292] usb 4-4: Manufacturer: Generic
[    3.144295] usb 4-4: SerialNumber: 20060413092100000
[    3.151320] scsi11 : usb-storage 4-4:1.0
[    3.151434] usbcore: registered new interface driver ums-realtek
[    3.244585] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.250920] ata6.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[    3.250926] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.256584] usb 4-5: new high-speed USB device number 3 using ehci_hcd
[    3.257317] ata6.00: configured for UDMA/133
[    3.257641] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
[    3.359761] scsi 10:0:0:0: Direct-Access     Flash    Drive AU_USB20   8.07 PQ: 0 ANSI: 2
[    3.406658] usb 4-5: New USB device found, idVendor=7392, idProduct=7711
[    3.406664] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.406669] usb 4-5: Product: 802.11 n WLAN
[    3.406672] usb 4-5: Manufacturer: Ralink
[    3.406675] usb 4-5: SerialNumber: 1.0
[    3.576582] ata7: SATA link down (SStatus 0 SControl 300)
[    3.648578] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    3.823455] usb 6-1: New USB device found, idVendor=1532, idProduct=010b
[    3.823461] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.823466] usb 6-1: Product: Razer Arctosa
[    3.823469] usb 6-1: Manufacturer: Razer
[    3.849621] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input0
[    3.849809] generic-usb 0003:1532:010B.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer Arctosa] on usb-0000:00:1a.1-1/input0
[    3.854583] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input1
[    3.854721] generic-usb 0003:1532:010B.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer Arctosa] on usb-0000:00:1a.1-1/input1
[    3.854750] usbcore: registered new interface driver usbhid
[    3.854753] usbhid: USB HID core driver
[    3.896689] ata8: SATA link down (SStatus 0 SControl 300)
[    3.897120] scsi 8:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
[    3.900628] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.900667] sd 4:0:0:0: [sda] Write Protect is off
[    3.900670] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.900683] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.900774] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    3.900808] sd 5:0:0:0: [sdb] Write Protect is off
[    3.900810] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.900824] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.900922] sd 8:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.900955] sd 8:0:0:0: [sdd] Write Protect is off
[    3.900957] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.900972] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.902056] sd 10:0:0:0: [sdc] 4095998 512-byte logical blocks: (2.09 GB/1.95 GiB)
[    3.902556] sd 10:0:0:0: [sdc] Write Protect is off
[    3.902558] sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
[    3.903056] sd 10:0:0:0: [sdc] No Caching mode page present
[    3.903103] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[    3.903421] scsi 3:0:0:0: Attached scsi generic sg0 type 5
[    3.903481] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.903530] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    3.903589] sd 10:0:0:0: Attached scsi generic sg3 type 0
[    3.903624] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    3.906052] sd 10:0:0:0: [sdc] No Caching mode page present
[    3.906106] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[    3.907585]  sdc: sdc1
[    3.908019]  sda: sda1 sda2
[    3.908350] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.909827] sd 10:0:0:0: [sdc] No Caching mode page present
[    3.909873] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[    3.909918] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[    3.916664]  sdd: sdd2 sdd3 < sdd5 > sdd4
[    3.917562] sd 8:0:0:0: [sdd] Attached SCSI disk
[    3.934184]  sdb: sdb1 sdb2 sdb3
[    3.935155] sd 5:0:0:0: [sdb] Attached SCSI disk
[    3.939777] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.939780] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.939890] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.068535] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[    4.161254] scsi 11:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.161943] sd 11:0:0:0: Attached scsi generic sg5 type 0
[    4.164424] sd 11:0:0:0: [sde] Attached SCSI removable disk
[    4.242397] usb 6-2: New USB device found, idVendor=1532, idProduct=0016
[    4.242403] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.242408] usb 6-2: Product: Razer DeathAdder
[    4.242411] usb 6-2: Manufacturer: Razer
[    4.249566] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/input/input2
[    4.249785] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.1-2/input0
[    4.687157] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3
[    4.689292] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[    4.689952] microcode: CPU0 updated to revision 0x5, date = 2011-09-01
[    4.689972] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3
[    4.692118] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[    4.692363] microcode: CPU1 updated to revision 0x5, date = 2011-09-01
[    4.692372] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3
[    4.694597] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[    4.695103] microcode: CPU2 updated to revision 0x5, date = 2011-09-01
[    4.695110] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3
[    4.697376] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[    4.697596] microcode: CPU3 updated to revision 0x5, date = 2011-09-01
[    4.697716] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.786495] PM: Starting manual resume from disk
[    4.786498] PM: Hibernation image partition 8:17 present
[    4.786499] PM: Looking for hibernation image.
[    4.786598] PM: Image not found (code -22)
[    4.786600] PM: Hibernation image not present or could not be loaded.
[    4.817086] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
[    5.875723] udevd[496]: starting version 175
[    5.974174] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.974179] ACPI: Power Button [PWRB]
[    5.974228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.974231] ACPI: Power Button [PWRF]
[    6.086786] ACPI: Requesting acpi_cpufreq
[    6.114424] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    6.114443] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.235700] EDAC MC: Ver: 2.1.0
[    6.236722] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[    6.236734] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[    6.236738] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    6.249171] hda_codec: ALC889: BIOS auto-probing.
[    6.257119] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    6.285707] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.319151] iTCO_vendor_support: vendor-support=0
[    6.336116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.336182] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0460)
[    6.336225] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.400594] [drm] Initialized drm 1.1.0 20060810
[    6.408193] wmi: Mapper loaded
[    6.443483] nouveau 0000:01:00.0: setting latency timer to 64
[    6.443513] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0100b1)
[    6.447089] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    6.517893] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    6.517895] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    6.517897] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    6.517899] [drm] nouveau 0000:01:00.0: Bios version 62.00.4c.00
[    6.517901] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    6.518119] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    6.518121] [drm] nouveau 0000:01:00.0: DCB version 4.0
[    6.518123] [drm] nouveau 0000:01:00.0: DCB outp 00: 04000320 00000028
[    6.518125] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000322 00020030
[    6.518126] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011310 00000028
[    6.518128] [drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00020030
[    6.518129] [drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c1c020
[    6.518130] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[    6.518132] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002130
[    6.518133] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000210
[    6.518135] [drm] nouveau 0000:01:00.0: DCB conn 03: 00000211
[    6.518136] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000213
[    6.518138] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000360
[    6.518141] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD073
[    6.548174] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD49E
[    6.550996] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE93B
[    6.551002] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA18
[    6.552002] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAEA
[    6.552004] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB4F
[    6.571846] [drm] nouveau 0000:01:00.0: 0xEB4F: Condition still not met after 20ms, skipping following opcodes
[    6.575683] [TTM] Zone  kernel: Available graphics memory: 2011948 kiB
[    6.575688] [TTM] Initializing pool allocator
[    6.575695] [TTM] Initializing DMA pool allocator
[    6.575705] [drm] nouveau 0000:01:00.0: Detected 896MiB VRAM (GDDR3)
[    6.575710] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    6.575719] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    6.612095] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[    6.612096] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[    6.613695] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.613697] [drm] No driver support for vblank timestamp query.
[    6.734398] adt7475 4-002e: ADT7473 device, revision 1
[    6.737111] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
[    6.737190] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    6.737194] [drm] nouveau 0000:01:00.0: 0: core 300MHz shader 600MHz memory 100MHz voltage 1050mV fanspeed 100%
[    6.737197] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 300MHz voltage 1050mV fanspeed 100%
[    6.737199] [drm] nouveau 0000:01:00.0: 3: core 576MHz shader 1242MHz memory 1015MHz voltage 1120mV fanspeed 100%
[    6.737202] [drm] nouveau 0000:01:00.0: c: core 399MHz shader 810MHz memory 297MHz voltage 1050mV
[    6.902969] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x330000, bo ffff880116d1e400
[    6.903063] fbcon: nouveaufb (fb0) is primary device
[    6.924405] cfg80211: Calling CRDA to update world regulatory domain
[    6.927737] Console: switching to colour frame buffer device 240x67
[    6.930313] fb0: nouveaufb frame buffer device
[    6.930314] drm: registered panic notifier
[    6.930317] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    7.124605] usb 4-5: reset high-speed USB device number 3 using ehci_hcd
[    7.310107] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.310526] Registered led device: rt2800usb-phy0::radio
[    7.310542] Registered led device: rt2800usb-phy0::assoc
[    7.310556] Registered led device: rt2800usb-phy0::quality
[    7.310575] usbcore: registered new interface driver rt2800usb
[    7.595306] cfg80211: World regulatory domain updated:
[    7.595308] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.595310] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.595313] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.595315] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.595317] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.595319] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.424644] Adding 131068k swap on /dev/sdb1.  Priority:-1 extents:1 across:131068k 
[   10.431714] EXT4-fs (sdd2): re-mounted. Opts: (null)
[   10.545689] EXT4-fs (sdd2): re-mounted. Opts: errors=remount-ro
[   10.609384] loop: module loaded
[   10.669496] lp: driver loaded but no devices found
[   11.311213] EXT4-fs (sdd4): mounted filesystem with ordered data mode. Opts: (null)
[   11.328573] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[   13.733276] Bluetooth: Core ver 2.16
[   13.733293] NET: Registered protocol family 31
[   13.733296] Bluetooth: HCI device and connection manager initialized
[   13.733299] Bluetooth: HCI socket layer initialized
[   13.733301] Bluetooth: L2CAP socket layer initialized
[   13.733306] Bluetooth: SCO socket layer initialized
[   13.759566] Bluetooth: RFCOMM TTY layer initialized
[   13.759575] Bluetooth: RFCOMM socket layer initialized
[   13.759578] Bluetooth: RFCOMM ver 1.11
[   13.792560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.792564] Bluetooth: BNEP filters: protocol multicast
[   14.700118] rt2800usb 4-5:1.0: firmware: agent loaded rt2870.bin into memory
[   14.969383] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.801172] wlan0: authenticate with 00:1c:f0:55:c8:f5 (try 1)
[   17.802687] wlan0: authenticated
[   17.856928] wlan0: associate with 00:1c:f0:55:c8:f5 (try 1)
[   17.859813] wlan0: RX AssocResp from 00:1c:f0:55:c8:f5 (capab=0x421 status=0 aid=2)
[   17.859819] wlan0: associated
[   17.888959] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.523836] fuse init (API version 7.17)
[   28.148726] wlan0: no IPv6 routers present
[ 3047.783979] usb 4-5: USB disconnect, device number 3
[ 3047.785124] wlan0: deauthenticating from 00:1c:f0:55:c8:f5 by local choice (reason=3)
[ 3047.798402] cfg80211: Calling CRDA to update world regulatory domain
[ 3047.804458] cfg80211: World regulatory domain updated:
[ 3047.804464] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3047.804469] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3047.804475] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3047.804479] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3047.804484] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3047.804488] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3316.612453] usb 4-5: new high-speed USB device number 4 using ehci_hcd
[ 3316.762454] usb 4-5: New USB device found, idVendor=7392, idProduct=7711
[ 3316.762460] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3316.762465] usb 4-5: Product: 802.11 n WLAN
[ 3316.762468] usb 4-5: Manufacturer: Ralink
[ 3316.762471] usb 4-5: SerialNumber: 1.0
[ 3316.876415] usb 4-5: reset high-speed USB device number 4 using ehci_hcd
[ 3317.035104] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 3317.036045] Registered led device: rt2800usb-phy1::radio
[ 3317.036078] Registered led device: rt2800usb-phy1::assoc
[ 3317.036111] Registered led device: rt2800usb-phy1::quality
[ 3317.079613] rt2800usb 4-5:1.0: firmware: agent loaded rt2870.bin into memory
[ 3317.350084] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3317.949356] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3317.950961] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3317.950967] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3320.058484] wlan0: authenticate with 00:1c:f0:55:c8:f5 (try 1)
[ 3320.060001] wlan0: authenticated
[ 3320.113322] wlan0: associate with 00:1c:f0:55:c8:f5 (try 1)
[ 3320.116119] wlan0: RX AssocResp from 00:1c:f0:55:c8:f5 (capab=0x421 status=0 aid=2)
[ 3320.116124] wlan0: associated
[ 3320.144881] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3330.232700] wlan0: no IPv6 routers present
[ 3370.156889] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3370.158886] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3370.158893] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3422.158534] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3422.160641] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3422.160647] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3474.160385] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3474.162335] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3474.162342] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3526.162003] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3526.163709] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3526.163716] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3578.163508] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3578.165577] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3578.165583] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3578.308499] usb 4-4: reset high-speed USB device number 2 using ehci_hcd
[ 3630.165389] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3630.167336] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3630.167342] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3636.706414] ieee80211 phy1: wlan0: No probe response from AP 00:1c:f0:55:c8:f5 after 500ms, disconnecting.
[ 3636.772618] cfg80211: Calling CRDA to update world regulatory domain
[ 3636.778610] cfg80211: World regulatory domain updated:
[ 3636.778615] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3636.778621] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3636.778626] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3636.778631] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3636.778635] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3636.778640] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3638.196241] wlan0: authenticate with 00:1c:f0:55:c8:f5 (try 1)
[ 3638.197746] wlan0: authenticated
[ 3638.214780] wlan0: associate with 00:1c:f0:55:c8:f5 (try 1)
[ 3638.217787] wlan0: RX ReassocResp from 00:1c:f0:55:c8:f5 (capab=0x421 status=0 aid=1)
[ 3638.217793] wlan0: associated
[ 3682.166366] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3682.168331] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3682.168337] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3734.169961] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3734.171572] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3734.171578] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3786.169378] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3786.171498] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3786.171504] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3838.169081] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3838.171047] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3838.171054] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3890.170063] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3890.171810] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3890.171816] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3942.170990] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3942.172691] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3942.172697] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 3994.171514] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 3994.173545] sd 11:0:0:0: [sde] Asking for cache data failed
[ 3994.173552] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4046.171558] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4046.173180] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4046.173187] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4098.172965] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4098.174796] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4098.174799] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4150.171358] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4150.172894] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4150.172899] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4202.172812] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4202.174433] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4202.174439] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4254.172803] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4254.174421] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4254.174427] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4306.174846] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4306.176553] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4306.176559] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4358.174854] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4358.176774] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4358.176780] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4410.176838] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4410.178780] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4410.178786] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4462.178227] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4462.180188] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4462.180195] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4462.330456] usb 4-4: reset high-speed USB device number 2 using ehci_hcd
[ 4514.176789] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4514.178840] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4514.178847] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4566.179458] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4566.181424] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4566.181431] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4618.181501] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4618.183350] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4618.183356] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4670.182583] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4670.184294] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4670.184300] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4722.183592] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4722.185535] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4722.185542] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4774.185482] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4774.187547] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4774.187553] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4826.187836] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4826.189725] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4826.189732] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4878.188979] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4878.191105] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4878.191111] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4930.189468] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4930.190990] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4930.190995] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 4982.192078] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 4982.193952] sd 11:0:0:0: [sde] Asking for cache data failed
[ 4982.193958] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5034.193819] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5034.195722] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5034.195728] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5086.195595] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5086.197660] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5086.197667] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5138.197847] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5138.199642] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5138.199648] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5190.199532] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5190.201343] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5190.201350] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5242.199198] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5242.201193] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5242.201199] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5294.203338] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5294.205145] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5294.205151] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5346.206450] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5346.208462] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5346.208468] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5398.207418] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5398.209383] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5398.209390] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5418.233821] wlan0: deauthenticating from 00:1c:f0:55:c8:f5 by local choice (reason=3)
[ 5418.241485] cfg80211: Calling CRDA to update world regulatory domain
[ 5418.299452] cfg80211: World regulatory domain updated:
[ 5418.299457] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5418.299463] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5418.299469] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5418.299473] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5418.299478] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5418.299482] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5419.722561] PM: Syncing filesystems ... done.
[ 5419.729533] PM: Preparing system for mem sleep
[ 5419.873498] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5419.889610] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5419.905615] PM: Entering mem sleep
[ 5419.905632] Suspending console(s) (use no_console_suspend to debug)
[ 5419.906068] sd 8:0:0:0: [sdd] Synchronizing SCSI cache
[ 5419.906193] sd 8:0:0:0: [sdd] Stopping disk
[ 5419.906737] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 5419.906859] sd 5:0:0:0: [sdb] Stopping disk
[ 5419.907594] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 5419.907838] sd 4:0:0:0: [sda] Stopping disk
[ 5419.911910] [drm] nouveau 0000:01:00.0: Disabling display...
[ 5419.973410] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[ 5419.973413] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[ 5419.973444] [drm] nouveau 0000:01:00.0: Evicting buffers...
[ 5420.462654] [drm] nouveau 0000:01:00.0: Idling channels...
[ 5420.463198] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[ 5422.310053] [drm] nouveau 0000:01:00.0: And we're gone!
[ 5422.325976] PM: suspend of devices complete after 2420.109 msecs
[ 5422.326222] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[ 5422.341924] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 5422.357729] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 5422.357764] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 5422.357798] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 5422.357830] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 5422.357860] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[ 5422.373729] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[ 5422.373764] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[ 5422.373798] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 5422.373923] PM: late suspend of devices complete after 47.940 msecs
[ 5422.374386] ACPI: Preparing to enter system sleep state S3
[ 5422.375251] PM: Saving platform NVS memory
[ 5422.375298] Disabling non-boot CPUs ...
[ 5422.376148] Broke affinity for irq 41
[ 5422.477652] CPU 1 is now offline
[ 5422.478335] Broke affinity for irq 42
[ 5422.581756] CPU 2 is now offline
[ 5422.583154] Broke affinity for irq 43
[ 5422.685697] CPU 3 is now offline
[ 5422.686418] ACPI: Low-level resume complete
[ 5422.686452] PM: Restoring platform NVS memory
[ 5422.687012] microcode: CPU0 updated to revision 0x5, date = 2011-09-01
[ 5422.687014] Enabling non-boot CPUs ...
[ 5422.687154] Booting Node 0 Processor 1 APIC 0x2
[ 5422.687155] smpboot cpu 1: start_ip = 98000
[ 5422.698180] Calibrating delay loop (skipped) already calibrated this CPU
[ 5422.718547] NMI watchdog enabled, takes one hw-pmu counter.
[ 5422.719363] microcode: CPU1 updated to revision 0x5, date = 2011-09-01
[ 5422.722436] hpet: hpet3 irq 41 for MSI
[ 5422.722511] CPU1 is up
[ 5422.723139] Booting Node 0 Processor 2 APIC 0x4
[ 5422.723143] smpboot cpu 2: start_ip = 98000
[ 5422.734179] Calibrating delay loop (skipped) already calibrated this CPU
[ 5422.754670] NMI watchdog enabled, takes one hw-pmu counter.
[ 5422.755488] microcode: CPU2 updated to revision 0x5, date = 2011-09-01
[ 5422.758512] hpet: hpet4 irq 42 for MSI
[ 5422.758590] CPU2 is up
[ 5422.758961] Booting Node 0 Processor 3 APIC 0x6
[ 5422.758963] smpboot cpu 3: start_ip = 98000
[ 5422.769988] Calibrating delay loop (skipped) already calibrated this CPU
[ 5422.790773] NMI watchdog enabled, takes one hw-pmu counter.
[ 5422.791422] microcode: CPU3 updated to revision 0x5, date = 2011-09-01
[ 5422.794660] hpet: hpet5 irq 43 for MSI
[ 5422.794759] CPU3 is up
[ 5422.797557] ACPI: Waking up from system sleep state S3
[ 5422.797868] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 5422.797894] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[ 5422.797920] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[ 5422.797958] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[ 5422.798112] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 5422.798137] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 5422.798163] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 5422.798188] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 5422.798275] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 5422.798694] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[ 5422.798814] PM: early resume of devices complete after 1.134 msecs
[ 5422.798943] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5422.798957] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5422.798965] usb usb5: root hub lost power or was reset
[ 5422.798980] usb usb6: root hub lost power or was reset
[ 5422.798983] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5422.799000] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5422.799005] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5422.799008] usb usb7: root hub lost power or was reset
[ 5422.799034] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5422.799037] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5422.799049] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 5422.799060] usb usb8: root hub lost power or was reset
[ 5422.799065] usb usb9: root hub lost power or was reset
[ 5422.799071] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5422.799082] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5422.799095] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5422.799097] usb usb10: root hub lost power or was reset
[ 5422.799105] usb usb11: root hub lost power or was reset
[ 5422.799108] pci 0000:00:1e.0: setting latency timer to 64
[ 5422.799112] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 5422.799118] nouveau 0000:01:00.0: setting latency timer to 64
[ 5422.799122] [drm] nouveau 0000:01:00.0: POSTing device...
[ 5422.799124] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD073
[ 5422.799153] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 5422.799243] ahci 0000:00:1f.2: setting latency timer to 64
[ 5422.799255] ahci 0000:02:00.0: setting latency timer to 64
[ 5422.799353] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 5422.800237] sd 4:0:0:0: [sda] Starting disk
[ 5422.800343] sd 5:0:0:0: [sdb] Starting disk
[ 5422.814368] sd 8:0:0:0: [sdd] Starting disk
[ 5422.840589] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD49E
[ 5422.889191] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE93B
[ 5422.889223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA18
[ 5422.890276] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAEA
[ 5422.890278] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB4F
[ 5422.910309] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 5423.118353] ata3: SATA link down (SStatus 0 SControl 300)
[ 5423.134331] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
[ 5423.134344] ata10: SATA link down (SStatus 0 SControl 300)
[ 5423.142332] ata8: SATA link down (SStatus 0 SControl 300)
[ 5423.146440] ata7: SATA link down (SStatus 0 SControl 300)
[ 5423.151311] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 5423.151737] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 5423.302416] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5423.309420] ata4.00: configured for UDMA/100
[ 5423.382543] usb 6-2: reset full-speed USB device number 3 using uhci_hcd
[ 5430.730671] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5430.742493] ata5.00: configured for UDMA/133
[ 5430.994732] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5431.006549] ata9.00: configured for UDMA/133
[ 5432.850745] ata6: softreset failed (device not ready)
[ 5439.391070] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5439.403766] ata6.00: configured for UDMA/133
[ 5439.434129] PM: resume of devices complete after 16634.594 msecs
[ 5439.434300] PM: Finishing wakeup.
[ 5439.434301] Restarting tasks ... done.
[ 5440.007955] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5440.761425] UDF-fs: warning (device sr0): udf_load_vrs: No VRS found
[ 5440.761432] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
[ 5442.644409] wlan0: authenticate with 00:1c:f0:55:c8:f5 (try 1)
[ 5442.645906] wlan0: authenticated
[ 5442.663987] wlan0: associate with 00:1c:f0:55:c8:f5 (try 1)
[ 5442.667639] wlan0: RX AssocResp from 00:1c:f0:55:c8:f5 (capab=0x421 status=0 aid=2)
[ 5442.667645] wlan0: associated
[ 5442.695743] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5450.207581] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5450.209132] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5450.209138] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5452.855590] wlan0: no IPv6 routers present
[ 5502.209318] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5502.211284] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5502.211290] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5554.210541] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5554.212606] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5554.212613] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5606.212138] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5606.213720] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5606.213726] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5658.215268] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5658.216881] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5658.216888] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5710.216627] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5710.218480] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5710.218555] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5762.219269] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5762.221255] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5762.221261] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5814.221225] sd 11:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5814.223240] sd 11:0:0:0: [sde] Asking for cache data failed
[ 5814.223245] sd 11:0:0:0: [sde] Assuming drive cache: write through
plenty@plenty-plentybox:~$

To clarify, this is a desktop rig - the 'wlan0' adapter is a cheap Wireless USB adapter - invaluable kit when this kind of disaster strikes.
Again, thanx in advance for your help.

Offline

#4 2013-05-18 16:13:28

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

Now install package 'firmware-realtek' and post output from

dmesg | grep -Ei 'eth|rtl'

Last edited by xaos52 (2013-05-18 16:15:08)

Offline

#5 2013-05-19 09:05:12

mynis01
#! Die Hard
From: 127.0.0.1
Registered: 2010-07-02
Posts: 2,005

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

sudo apt-get install linux-headers-$(uname -r)

Last edited by mynis01 (2013-05-19 10:02:54)

Offline

#6 2013-05-19 17:53:51

plenty
New Member
From: Brighton, United Kingdom
Registered: 2013-05-16
Posts: 9

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

sudo update-grub

Last edited by plenty (2013-05-19 17:58:23)

Offline

#7 2013-06-21 01:37:57

arkanabar
Member
Registered: 2009-11-29
Posts: 19

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

sudo apt-get install linux-headers-$(uname -r)

Offline

#8 2013-08-20 17:47:50

gyros
New Member
Registered: 2013-08-20
Posts: 1

Re: SOLVED: Realtek r8168/r8169 no Ethernet!

    Module build for the currently running kernel was skipped since the
    kernel source for this kernel does not seem to be installed.

Last edited by gyros (2013-08-20 22:28:19)

Offline

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.
Server: bleh

Debian Logo