SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 2012-05-03 08:14:46

MrHoggsy
New Member
Registered: 2012-05-02
Posts: 4

[SOLVED]uvcvideo failed to initialize the device

Hi

Hope this is the right place for this sorry if its not,
I have been running stable without any issue's so I thought I would give testing a go and have run into one problem, When booting I get the error "uvcvideo failed to initialize the device -5" which holds up the boot  for about 2 minutes before its killed and the boot process completes.

I think this error is to do with the motion eye webcam on my old sony vaio but anyway is there away to stop uvcvideo running on boot or even better a fix for the issue?

I have looked into drivers but can only find one for the older kernel which seemed to cause more problems than they solved.

Cheers

Last edited by MrHoggsy (2012-05-04 09:00:55)

Offline

Be excellent to each other!

#2 2012-05-03 09:37:54

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED]uvcvideo failed to initialize the device

dmesg

Last edited by xaos52 (2012-05-03 09:38:06)

Offline

#3 2012-05-03 18:25:15

falldown
#! Samurai
Registered: 2011-09-01
Posts: 1,727

Re: [SOLVED]uvcvideo failed to initialize the device

Last edited by falldown (2012-05-03 18:59:31)

Offline

#4 2012-05-03 19:26:41

MrHoggsy
New Member
Registered: 2012-05-02
Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP Sun Apr 15 17:56:31 UTC 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
[    0.000000]  BIOS-e820: 000000007feb0000 - 000000007fecb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fecb000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-SZ61WN_C/VAIO                            , BIOS R0091S5 08/27/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7700] f7700
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36c72000 - 37631000
[    0.000000] ACPI: RSDP 000f76d0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7febe3ec 00094 (v01   Sony     VAIO 20070827 PTL  00000000)
[    0.000000] ACPI: FACP 7fec7bd2 000F4 (v03   Sony     VAIO 20070827 PTL  00000001)
[    0.000000] ACPI: DSDT 7fec041a 07744 (v02   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: FACS 7fecafc0 00040
[    0.000000] ACPI: APIC 7fec7cc6 00068 (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: HPET 7fec7d2e 00038 (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: MCFG 7fec7d66 0003C (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: TCPA 7fec7da2 00032 (v01   Sony     VAIO 20070827 PTL  00005A52)
[    0.000000] ACPI: TMOR 7fec7dd4 00026 (v01   Sony     VAIO 20070827 PTL  00000003)
[    0.000000] ACPI: SLIC 7fec7dfa 00176 (v01   Sony     VAIO 20070827 PTL  01000000)
[    0.000000] ACPI: APIC 7fec7f70 00068 (v01   Sony     VAIO 20070827 PTL  00000000)
[    0.000000] ACPI: BOOT 7fec7fd8 00028 (v01   Sony     VAIO 20070827 PTL  00000001)
[    0.000000] ACPI: SSDT 7febfd59 006C1 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febf64b 0070E (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febea0c 0025F (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febe966 000A6 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febe480 004E6 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1156MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0007feb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007feb0
[    0.000000] On node 0 totalpages: 523839
[    0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f5c72200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2314 pages used for memmap
[    0.000000]   HighMem zone: 293800 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f5a00000 s33024 r0 d24320 u1048576
[    0.000000] pcpu-alloc: s33024 r0 d24320 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519745
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=6c51cf76-4fb2-41a7-ab36-45629dcb953a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007feb0)
[    0.000000] Memory: 2062788k/2095808k available (2841k kernel code, 32568k reserved, 1372k data, 412k init, 1184456k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141e000 - 0xc1485000   ( 412 kB)
[    0.000000]       .data : 0xc12c65ac - 0xc141d600   (1372 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c65ac   (2841 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2195.174 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.34 BogoMIPS (lpj=8780696)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004106] Security Framework initialized
[    0.004118] AppArmor: AppArmor disabled by boot time parameter
[    0.004159] Mount-cache hash table entries: 512
[    0.004441] Initializing cgroup subsys cpuacct
[    0.004455] Initializing cgroup subsys memory
[    0.004474] Initializing cgroup subsys devices
[    0.004480] Initializing cgroup subsys freezer
[    0.004485] Initializing cgroup subsys net_cls
[    0.004491] Initializing cgroup subsys blkio
[    0.004505] Initializing cgroup subsys perf_event
[    0.004575] CPU: Physical Processor ID: 0
[    0.004580] CPU: Processor Core ID: 0
[    0.004587] mce: CPU supports 6 MCE banks
[    0.004604] CPU0: Thermal monitoring enabled (TM2)
[    0.004612] using mwait in idle threads.
[    0.005641] ACPI: Core revision 20110623
[    0.020110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020709] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062006] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.064003] PEBS disabled due to CPU errata.
[    0.064003] ... version:                2
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[    0.064003] Booting Node   0, Processors  #1 Ok.
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.156063] NMI watchdog enabled, takes one hw-pmu counter.
[    0.156134] Brought up 2 CPUs
[    0.156141] Total of 2 processors activated (8779.38 BogoMIPS).
[    0.160170] devtmpfs: initialized
[    0.160375] PM: Registering ACPI NVS region at 7feb0000 (110592 bytes)
[    0.160478] print_constraints: dummy: 
[    0.160611] NET: Registered protocol family 16
[    0.160849] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160856] ACPI: bus type pci registered
[    0.161037] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.161045] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.161051] PCI: Using MMCONFIG for extended config space
[    0.161056] PCI: Using configuration type 1 for base access
[    0.164452] bio: create slab <bio-0> at 0
[    0.164452] ACPI: Added _OSI(Module Device)
[    0.164452] ACPI: Added _OSI(Processor Device)
[    0.164452] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164452] ACPI: Added _OSI(Processor Aggregator Device)
[    0.168244] ACPI: EC: Look up EC in DSDT
[    0.174855] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.176856] ACPI: SSDT 7febf309 0027A (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.177649] ACPI: Dynamic OEM Table Load:
[    0.177658] ACPI: SSDT   (null) 0027A (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.178027] ACPI: SSDT 7febec6b 00619 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.180304] ACPI: Dynamic OEM Table Load:
[    0.180313] ACPI: SSDT   (null) 00619 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.180957] ACPI: SSDT 7febf583 000C8 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.181727] ACPI: Dynamic OEM Table Load:
[    0.181735] ACPI: SSDT   (null) 000C8 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.181991] ACPI: SSDT 7febf284 00085 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.182737] ACPI: Dynamic OEM Table Load:
[    0.182745] ACPI: SSDT   (null) 00085 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.183415] ACPI: Interpreter enabled
[    0.183447] ACPI: (supports S0 S3 S4 S5)
[    0.183497] ACPI: Using IOAPIC for interrupt routing
[    0.216765] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.226037] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.226044] HEST: Table not found.
[    0.226058] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.228312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.230081] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.230090] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.230099] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.230107] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.230115] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.230122] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.230130] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.230139] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.230147] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.230155] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[    0.230181] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[    0.230304] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[    0.230421] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.230431] pci 0000:00:01.0: PME# disabled
[    0.230587] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[    0.230779] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.230920] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[    0.231111] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.231296] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[    0.231375] pci 0000:00:1a.7: reg 10: [mem 0xfc304000-0xfc3043ff]
[    0.231731] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.231747] pci 0000:00:1a.7: PME# disabled
[    0.231847] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[    0.231922] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
[    0.232281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.232297] pci 0000:00:1b.0: PME# disabled
[    0.232392] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[    0.232763] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.232778] pci 0000:00:1c.0: PME# disabled
[    0.232885] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[    0.233249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.233264] pci 0000:00:1c.1: PME# disabled
[    0.233364] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[    0.233733] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.233748] pci 0000:00:1c.2: PME# disabled
[    0.233855] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[    0.234223] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.234238] pci 0000:00:1c.3: PME# disabled
[    0.234343] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[    0.234532] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.234670] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[    0.234861] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.234998] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[    0.235185] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.235368] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[    0.235448] pci 0000:00:1d.7: reg 10: [mem 0xfc304400-0xfc3047ff]
[    0.235804] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.235819] pci 0000:00:1d.7: PME# disabled
[    0.235893] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.236217] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[    0.236507] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.236524] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.236542] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f)
[    0.236699] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[    0.236754] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.236794] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.236834] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.236873] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.236913] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.237071] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
[    0.237138] pci 0000:00:1f.2: reg 10: [io  0x18f8-0x18ff]
[    0.237176] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.237215] pci 0000:00:1f.2: reg 18: [io  0x18f0-0x18f7]
[    0.237253] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.237292] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ef]
[    0.237331] pci 0000:00:1f.2: reg 24: [io  0x18d0-0x18df]
[    0.237478] pci 0000:00:1f.2: PME# supported from D3hot
[    0.237493] pci 0000:00:1f.2: PME# disabled
[    0.237541] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[    0.237596] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.237739] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.237977] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
[    0.238010] pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
[    0.238045] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.238080] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
[    0.238105] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.238129] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.244043] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.244054] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.244064] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.244077] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.244276] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.244291] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.244307] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.244333] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.244653] pci 0000:06:00.0: [8086:4222] type 0 class 0x000280
[    0.244724] pci 0000:06:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
[    0.245226] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.245245] pci 0000:06:00.0: PME# disabled
[    0.252114] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    0.252126] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.252138] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.252155] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.252544] pci 0000:07:00.0: [11ab:4363] type 0 class 0x000200
[    0.252749] pci 0000:07:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit]
[    0.252856] pci 0000:07:00.0: reg 18: [io  0x5000-0x50ff]
[    0.253224] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.253797] pci 0000:07:00.0: supports D1 D2
[    0.253804] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.253838] pci 0000:07:00.0: PME# disabled
[    0.260117] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.260133] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.260149] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.260175] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.260377] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[    0.260393] pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
[    0.260409] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc5ffffff]
[    0.260435] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.260597] pci 0000:09:04.0: [104c:8039] type 2 class 0x000607
[    0.260671] pci 0000:09:04.0: reg 10: [mem 0xfc004000-0xfc004fff]
[    0.260791] pci 0000:09:04.0: supports D1 D2
[    0.260797] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.260813] pci 0000:09:04.0: PME# disabled
[    0.260882] pci 0000:09:04.1: [104c:803a] type 0 class 0x000c00
[    0.260952] pci 0000:09:04.1: reg 10: [mem 0xfc006000-0xfc0067ff]
[    0.260993] pci 0000:09:04.1: reg 14: [mem 0xfc000000-0xfc003fff]
[    0.261287] pci 0000:09:04.1: supports D1 D2
[    0.261293] pci 0000:09:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261309] pci 0000:09:04.1: PME# disabled
[    0.261372] pci 0000:09:04.2: [104c:803b] type 0 class 0x000180
[    0.261442] pci 0000:09:04.2: reg 10: [mem 0xfc005000-0xfc005fff]
[    0.261764] pci 0000:09:04.2: supports D1 D2
[    0.261771] pci 0000:09:04.2: PME# supported from D0 D1 D2 D3hot
[    0.261787] pci 0000:09:04.2: PME# disabled
[    0.261971] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[    0.261997] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.262023] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.262031] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.262178] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[    0.262296] pci_bus 0000:00: on NUMA node 0
[    0.262305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.262899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.263074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.263295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.263443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.263591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.263806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.264202]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.264392]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[    0.264398] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.280675] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.280815] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.280952] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281221] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281353] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281488] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281622] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.281846] vgaarb: loaded
[    0.281846] vgaarb: bridge control possible 0000:01:00.0
[    0.281846] PCI: Using ACPI for IRQ routing
[    0.318258] PCI: pci_cache_line_size set to 64 bytes
[    0.318664] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.318672] reserve RAM buffer: 000000007feb0000 - 000000007fffffff 
[    0.318933] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.318951] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.318964] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.324188] Switching to clocksource hpet
[    0.328541] pnp: PnP ACPI init
[    0.328577] ACPI: bus type pnp registered
[    0.329454] pnp 00:00: [bus 00-ff]
[    0.329463] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.329470] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.329477] pnp 00:00: [io  0x0d00-0xffff window]
[    0.329484] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.329491] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.329498] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.329505] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.329511] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.329518] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.329525] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.329532] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.329543] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.329549] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.329556] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.329563] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.329570] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.329577] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.329584] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.329591] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.329598] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.329746] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.329995] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.330003] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.330009] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.330015] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.330021] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.330027] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.330034] pnp 00:01: [mem 0xfed40000-0xfed3ffff disabled]
[    0.330040] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.330183] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.330192] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.330201] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.330209] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.330218] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.330226] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.330235] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.330243] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334905] pnp 00:02: Plug and Play ACPI device, IDs SNY6001 (disabled)
[    0.334945] pnp 00:03: [io  0x0000-0x001f]
[    0.334951] pnp 00:03: [io  0x0081-0x0091]
[    0.334957] pnp 00:03: [io  0x0093-0x009f]
[    0.334963] pnp 00:03: [io  0x00c0-0x00df]
[    0.334969] pnp 00:03: [dma 4]
[    0.335089] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.335115] pnp 00:04: [mem 0xff000000-0xffffffff]
[    0.335237] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.335419] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.335543] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.335574] pnp 00:06: [io  0x00f0]
[    0.335594] pnp 00:06: [irq 13]
[    0.335717] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.335748] pnp 00:07: [io  0x002e-0x002f]
[    0.335754] pnp 00:07: [io  0x004e-0x004f]
[    0.335760] pnp 00:07: [io  0x0061]
[    0.335766] pnp 00:07: [io  0x0063]
[    0.335771] pnp 00:07: [io  0x0065]
[    0.335777] pnp 00:07: [io  0x0067]
[    0.335782] pnp 00:07: [io  0x0080]
[    0.335788] pnp 00:07: [io  0x0092]
[    0.335793] pnp 00:07: [io  0x00b2-0x00b3]
[    0.335800] pnp 00:07: [io  0x0680-0x069f]
[    0.335805] pnp 00:07: [io  0x0800-0x080f]
[    0.335812] pnp 00:07: [io  0x1000-0x107f]
[    0.335817] pnp 00:07: [io  0x1180-0x11bf]
[    0.335823] pnp 00:07: [io  0x1640-0x164f]
[    0.335829] pnp 00:07: [io  0xfe00]
[    0.336079] system 00:07: [io  0x0680-0x069f] has been reserved
[    0.336088] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.336097] system 00:07: [io  0x1000-0x107f] has been reserved
[    0.336105] system 00:07: [io  0x1180-0x11bf] has been reserved
[    0.336116] system 00:07: [io  0x1640-0x164f] has been reserved
[    0.336124] system 00:07: [io  0xfe00] has been reserved
[    0.336133] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336161] pnp 00:08: [io  0x0070-0x0077]
[    0.336175] pnp 00:08: [irq 8]
[    0.336304] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.336396] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[    0.336403] pnp 00:09: [io  0x167e-0x167f]
[    0.336409] pnp 00:09: [io  0x1670-0x167b]
[    0.336422] pnp 00:09: [irq 3]
[    0.336434] pnp 00:09: [irq 5]
[    0.336445] pnp 00:09: [irq 7]
[    0.336451] pnp 00:09: IRQ 9 override to level, high
[    0.336457] pnp 00:09: [irq 9]
[    0.336469] pnp 00:09: [irq 10]
[    0.336480] pnp 00:09: [irq 11]
[    0.336486] pnp 00:09: [irq 13]
[    0.336621] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.336649] pnp 00:0a: [io  0x0060]
[    0.336655] pnp 00:0a: [io  0x0064]
[    0.336668] pnp 00:0a: [irq 1]
[    0.336794] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.336828] pnp 00:0b: [irq 12]
[    0.336956] pnp 00:0b: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.340900] pnp: PnP ACPI: found 12 devices
[    0.340906] ACPI: ACPI bus type pnp unregistered
[    0.340915] PnPBIOS: Disabled by ACPI PNP
[    0.382256] PCI: max bus depth: 2 pci_try_num: 3
[    0.382448] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff]
[    0.382468] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff] (PCI address [0x80000000-0x800000ff])
[    0.382480] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.382493] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.382503] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.382511] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.382519] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.382531] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.382541] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.382554] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.382564] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.382585] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.382602] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.382628] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    0.382639] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.382659] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.382676] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.382704] pci 0000:07:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.382711] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.382722] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.382743] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.382759] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.382785] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[    0.382796] pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
[    0.382816] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc5ffffff]
[    0.382833] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.382866] pci 0000:09:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.382875] pci 0000:09:04.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.382883] pci 0000:09:04.0: BAR 14: assigned [io  0x7000-0x70ff]
[    0.382891] pci 0000:09:04.0: BAR 13: assigned [io  0x7400-0x74ff]
[    0.382898] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[    0.382905] pci 0000:09:04.0:   bridge window [io  0x7400-0x74ff]
[    0.382918] pci 0000:09:04.0:   bridge window [io  0x7000-0x70ff]
[    0.382935] pci 0000:09:04.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.382951] pci 0000:09:04.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.382967] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.382977] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.382998] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.383014] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.383063] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.383073] pci 0000:00:01.0: setting latency timer to 64
[    0.383093] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.383109] pci 0000:00:1c.0: setting latency timer to 64
[    0.383140] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.383156] pci 0000:00:1c.1: setting latency timer to 64
[    0.383187] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.383203] pci 0000:00:1c.2: setting latency timer to 64
[    0.383233] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.383248] pci 0000:00:1c.3: setting latency timer to 64
[    0.383274] pci 0000:00:1e.0: setting latency timer to 64
[    0.383306] pci 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.383325] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.383332] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.383339] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.383346] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[    0.383354] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.383361] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.383368] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.383375] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.383383] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.383389] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.383396] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.383404] pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
[    0.383410] pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.383418] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.383425] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.383431] pci_bus 0000:08: resource 1 [mem 0xc4000000-0xc5ffffff]
[    0.383439] pci_bus 0000:08: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.383446] pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
[    0.383452] pci_bus 0000:09: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.383459] pci_bus 0000:09: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.383466] pci_bus 0000:09: resource 4 [io  0x0000-0xffff]
[    0.383473] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[    0.383480] pci_bus 0000:0a: resource 0 [io  0x7400-0x74ff]
[    0.383487] pci_bus 0000:0a: resource 1 [io  0x7000-0x70ff]
[    0.383494] pci_bus 0000:0a: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.383501] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[    0.383631] NET: Registered protocol family 2
[    0.383781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.384375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.385199] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.385584] TCP: Hash tables configured (established 131072 bind 65536)
[    0.385590] TCP reno registered
[    0.385597] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.385615] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.385791] NET: Registered protocol family 1
[    0.385840] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.385888] pci 0000:00:1a.0: PCI INT A disabled
[    0.385910] pci 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.385954] pci 0000:00:1a.1: PCI INT B disabled
[    0.385980] pci 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    0.386046] pci 0000:00:1a.7: PCI INT C disabled
[    0.386119] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.386164] pci 0000:00:1d.0: PCI INT A disabled
[    0.386184] pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.386230] pci 0000:00:1d.1: PCI INT B disabled
[    0.386252] pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    0.386296] pci 0000:00:1d.2: PCI INT C disabled
[    0.386322] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.386370] pci 0000:00:1d.7: PCI INT D disabled
[    0.386446] pci 0000:01:00.0: Boot video device
[    0.386547] PCI: CLS 64 bytes, default 64
[    0.386666] Unpacking initramfs...
[    1.113141] Freeing initrd memory: 9980k freed
[    1.122475] Simple Boot Flag at 0x36 set to 0x1
[    1.123576] audit: initializing netlink socket (disabled)
[    1.123606] type=2000 audit(1336072300.116:1): initialized
[    1.182086] highmem bounce pool size: 64 pages
[    1.182098] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.195018] VFS: Disk quotas dquot_6.5.2
[    1.195116] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.195293] msgmni has been set to 1734
[    1.195723] alg: No test for stdrng (krng)
[    1.195801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.195810] io scheduler noop registered
[    1.195815] io scheduler deadline registered
[    1.195853] io scheduler cfq registered (default)
[    1.196108] pcieport 0000:00:01.0: setting latency timer to 64
[    1.196190] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.196334] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.196516] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.196768] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.196948] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.197199] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.197379] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    1.197633] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.197815] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    1.198125] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.198200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.198206] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.198739] acpiphp: Slot [1] registered
[    1.199243] acpiphp: Slot [4] registered
[    1.199694] intel_idle: MWAIT substates: 0x22220
[    1.199700] intel_idle: does not run on family 6 model 15
[    1.199769] ERST: Table is not found!
[    1.199773] GHES: HEST is not enabled!
[    1.199807] isapnp: Scanning for PnP cards...
[    1.558255] isapnp: No Plug & Play device found
[    1.558421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.564992] Linux agpgart interface v0.103
[    1.565895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.567837] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.567854] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.568245] mousedev: PS/2 mouse device common for all mice
[    1.568382] rtc_cmos 00:08: RTC can wake from S4
[    1.568657] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.568723] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.568749] cpuidle: using governor ladder
[    1.568754] cpuidle: using governor menu
[    1.569269] TCP cubic registered
[    1.569379] NET: Registered protocol family 10
[    1.570660] Mobile IPv6
[    1.570668] NET: Registered protocol family 17
[    1.570678] Registering the dns_resolver key type
[    1.570716] Using IPI No-Shortcut mode
[    1.571053] PM: Hibernation image not present or could not be loaded.
[    1.571075] registered taskstats version 1
[    1.578827] rtc_cmos 00:08: setting system clock to 2012-05-03 19:11:41 UTC (1336072301)
[    1.578968] Initializing network drop monitor service
[    1.579212] Freeing unused kernel memory: 412k freed
[    1.579577] Write protecting the kernel text: 2844k
[    1.579676] Write protecting the kernel read-only data: 1112k
[    1.579681] NX-protecting the kernel data: 3300k
[    1.596125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.615899] udevd[49]: starting version 175
[    1.691881] sky2: driver version 1.30
[    1.691988] sky2 0000:07:00.0: power state changed by ACPI to D0
[    1.696969] usbcore: registered new interface driver usbfs
[    1.697035] usbcore: registered new interface driver hub
[    1.708127] usbcore: registered new device driver usb
[    1.709162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.709229] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    1.709279] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.709290] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.709347] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.709426] ehci_hcd 0000:00:1a.7: debug port 1
[    1.713341] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.729322] sky2 0000:07:00.0: power state changed by ACPI to D0
[    1.729391] sky2 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.729479] sky2 0000:07:00.0: setting latency timer to 64
[    1.729627] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
[    1.730306] sky2 0000:07:00.0: irq 45 for MSI/MSI-X
[    1.731152] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc304000
[    1.732172] sky2 0000:07:00.0: eth0: addr 00:1a:80:59:e7:4c
[    1.744851] uhci_hcd: USB Universal Host Controller Interface driver
[    1.752252] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.752345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.752353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.752360] usb usb1: Product: EHCI Host Controller
[    1.752366] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[    1.752372] usb usb1: SerialNumber: 0000:00:1a.7
[    1.753061] hub 1-0:1.0: USB hub found
[    1.753076] hub 1-0:1.0: 4 ports detected
[    1.753330] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.753364] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.753375] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.753399] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.753468] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[    1.753562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.753569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.753576] usb usb2: Product: UHCI Host Controller
[    1.753582] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.753588] usb usb2: SerialNumber: 0000:00:1a.0
[    1.753858] hub 2-0:1.0: USB hub found
[    1.753872] hub 2-0:1.0: 2 ports detected
[    1.754065] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.754092] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.754103] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.754121] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    1.754184] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[    1.754273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.754281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754288] usb usb3: Product: UHCI Host Controller
[    1.754293] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.754300] usb usb3: SerialNumber: 0000:00:1a.1
[    1.754578] hub 3-0:1.0: USB hub found
[    1.754589] hub 3-0:1.0: 2 ports detected
[    1.754792] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.754820] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.754830] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.754855] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.754949] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.755038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.755046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755052] usb usb4: Product: UHCI Host Controller
[    1.755058] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.755064] usb usb4: SerialNumber: 0000:00:1d.0
[    1.755335] hub 4-0:1.0: USB hub found
[    1.755347] hub 4-0:1.0: 2 ports detected
[    1.755549] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    1.755575] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.755585] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.755604] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.755668] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001860
[    1.755758] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.755766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755772] usb usb5: Product: UHCI Host Controller
[    1.755778] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.755785] usb usb5: SerialNumber: 0000:00:1d.1
[    1.756093] hub 5-0:1.0: USB hub found
[    1.756105] hub 5-0:1.0: 2 ports detected
[    1.756300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    1.756328] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.756343] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.756622] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.756688] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001880
[    1.756771] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.756779] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.756786] usb usb6: Product: UHCI Host Controller
[    1.756792] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.756798] usb usb6: SerialNumber: 0000:00:1d.2
[    1.757082] hub 6-0:1.0: USB hub found
[    1.757093] hub 6-0:1.0: 2 ports detected
[    1.757851] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.757899] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.757910] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.757932] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    1.758006] ehci_hcd 0000:00:1d.7: debug port 1
[    1.761926] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.772982] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304400
[    1.779235] thermal LNXTHERM:00: registered as thermal_zone0
[    1.779243] ACPI: Thermal Zone [ATF0] (28 C)
[    1.780494] thermal LNXTHERM:01: registered as thermal_zone1
[    1.780502] ACPI: Thermal Zone [DTS0] (23 C)
[    1.781713] thermal LNXTHERM:02: registered as thermal_zone2
[    1.781720] ACPI: Thermal Zone [DTS1] (24 C)
[    1.796054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.796119] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.796128] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.796135] usb usb7: Product: EHCI Host Controller
[    1.796140] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[    1.796147] usb usb7: SerialNumber: 0000:00:1d.7
[    1.796453] hub 7-0:1.0: USB hub found
[    1.796466] hub 7-0:1.0: 6 ports detected
[    1.849705] firewire_ohci 0000:09:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.850491] SCSI subsystem initialized
[    1.859068] libata version 3.00 loaded.
[    1.859895] ata_piix 0000:00:1f.1: version 2.13
[    1.859938] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.860067] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.863586] scsi0 : ata_piix
[    1.863807] scsi1 : ata_piix
[    1.864977] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.864986] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.865041] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.865058] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.904164] firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.020119] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.021013] scsi2 : ata_piix
[    2.021179] scsi3 : ata_piix
[    2.023105] ata3: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 22
[    2.023125] ata4: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 22
[    2.034827] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.90, max UDMA/33
[    2.048505] ata1.00: configured for UDMA/33
[    2.051004] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-852S  1.90 PQ: 0 ANSI: 5
[    2.120050] Refined TSC clocksource calibration: 2194.499 MHz.
[    2.120061] Switching to clocksource tsc
[    2.176029] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    2.311367] usb 1-2: New USB device found, idVendor=05ca, idProduct=183a
[    2.311376] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.404206] firewire_core: created device fw0: GUID 080046030296763b, S400
[    2.552050] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.726561] usb 2-1: New USB device found, idVendor=147e, idProduct=2016
[    2.726569] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.726576] usb 2-1: Product: Fingerprint Sensor   
[    2.726581] usb 2-1: Manufacturer: TouchStrip        
[    2.816204] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.816244] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.824462] ata3.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133
[    2.824470] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.840462] ata3.00: configured for UDMA/133
[    2.840709] scsi 2:0:0:0: Direct-Access     ATA      ST91608220AS     3.AL PQ: 0 ANSI: 5
[    3.120022] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    3.330775] usb 6-1: New USB device found, idVendor=044e, idProduct=300d
[    3.330784] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.330791] usb 6-1: Product: UGX
[    3.330796] usb 6-1: Manufacturer: ALPS
[    3.330801] usb 6-1: SerialNumber: 0106e73d
[    3.368029] ata4.01: failed to resume link (SControl 0)
[    3.381818] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.381866] ata4.01: SATA link down (SStatus 0 SControl 0)
[    3.395198] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.395206] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.395501] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.396200] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.396335] sd 2:0:0:0: [sda] Write Protect is off
[    3.396343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.396402] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.427434]  sda: sda1 sda2 < sda5 sda6 >
[    3.428355] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.140766] PM: Starting manual resume from disk
[    4.140775] PM: Hibernation image partition 8:5 present
[    4.140780] PM: Looking for hibernation image.
[    4.141128] PM: Image not found (code -22)
[    4.141134] PM: Hibernation image not present or could not be loaded.
[    4.180342] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.720821] udevd[287]: starting version 175
[    6.210789] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
[    6.211294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input1
[    6.211310] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[    6.222350] Monitor-Mwait will be used to enter C-1 state
[    6.222408] Monitor-Mwait will be used to enter C-2 state
[    6.222459] Monitor-Mwait will be used to enter C-3 state
[    6.222472] Marking TSC unstable due to TSC halts in idle
[    6.222503] ACPI: acpi_idle registered with cpuidle
[    6.223550] Switching to clocksource hpet
[    6.291277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    6.291294] ACPI: Power Button [PWRB]
[    6.291450] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.293682] ACPI: Lid Switch [LID0]
[    6.363793] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:9008]
[    6.363849] yenta_cardbus 0000:09:04.0: Enabling burst memory read transactions
[    6.363865] yenta_cardbus 0000:09:04.0: Using CSCINT to route CSC interrupts to PCI
[    6.363872] yenta_cardbus 0000:09:04.0: Routing CardBus interrupts to PCI
[    6.363890] yenta_cardbus 0000:09:04.0: TI: mfunc 0x01a21b22, devctl 0x64
[    6.373582] ACPI: AC Adapter [ACAD] (off-line)
[    6.405142] ACPI: Battery Slot [BAT1] (battery present)
[    6.561100] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.596965] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[    6.596977] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[    6.596987] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[    6.597011] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[    6.597019] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff
[    6.601780] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[    6.602172]  0x7400-0x74ff
[    6.609156] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
[    6.609166] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfc0fffff: excluding 0xfc000000-0xfc00ffff
[    6.609208] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[    6.609216] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[    6.846481] iTCO_vendor_support: vendor-support=0
[    6.854604] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    6.854618] ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[    6.854630] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.972805] sony_laptop: Sony Programmable IO Control Driver v0.6
[    6.972852] sony_laptop: detected Type3 model
[    6.975075] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input5
[    6.975311] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[    6.975548] sony_laptop: device allocated minor is 58
[    6.983491] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.983687] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.985315] sony_laptop: Sony Notebook Control Driver v0.6
[    7.001272] cfg80211: Calling CRDA to update world regulatory domain
[    7.010332] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    7.010351] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    7.010375] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    7.010546] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.010639] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.161007] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.161315] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.170487] tifm_7xx1 0000:09:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    7.243837] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[    7.247635] [drm] Initialized drm 1.1.0 20060810
[    7.265064] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[    7.272179] tpm_tis 00:09: Adjusting TPM timeout parameters.
[    7.301736] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    7.301744] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    7.301883] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[    7.301899] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[    7.301927] iwl3945 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.301948] iwl3945 0000:06:00.0: setting latency timer to 64
[    7.358141] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    7.358149] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    7.358335] iwl3945 0000:06:00.0: irq 47 for MSI/MSI-X
[    7.358627] Registered led device: phy0-led
[    7.388835] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    7.432606] Bluetooth: Core ver 2.16
[    7.432648] NET: Registered protocol family 31
[    7.432654] Bluetooth: HCI device and connection manager initialized
[    7.432662] Bluetooth: HCI socket layer initialized
[    7.432667] Bluetooth: L2CAP socket layer initialized
[    7.433082] Bluetooth: SCO socket layer initialized
[    7.465866] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.466642] usbcore: registered new interface driver btusb
[    7.640869] Linux media interface: v0.10
[    7.659431] Linux video capture interface: v2.00
[    7.673639] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183a)
[    7.674370] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[    7.674618] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[    7.674722] uvcvideo: Failed to initialize the device (-5).
[    7.674993] usbcore: registered new interface driver uvcvideo
[    7.674998] USB Video Class driver (1.1.1)
[    7.687498] wmi: Mapper loaded
[    7.985080] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.985095] nouveau 0000:01:00.0: setting latency timer to 64
[    7.989017] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086700a2)
[    8.001369] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    8.061640] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    8.061653] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    8.061660] [drm] nouveau 0000:01:00.0: Bios version 60.86.57.00
[    8.061669] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    8.061676] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    8.061684] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010103f3 00010015
[    8.061691] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02001300 00000028
[    8.061698] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02402312 00020010
[    8.061705] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[    8.061713] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[    8.061721] [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[    8.061730] [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[    8.061738] [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
[    8.061747] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC551
[    8.084868] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8C8
[    8.101618] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD31D
[    8.101636] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD40F
[    8.102725] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD609
[    8.102731] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD66E
[    8.122587] [drm] nouveau 0000:01:00.0: 0xD66E: Condition still not met after 20ms, skipping following opcodes
[    8.122612] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (70600kHz pixel clock)
[    8.141860] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    8.141875] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100%
[    8.141889] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100%
[    8.141902] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 600MHz timing 2 voltage 1150mV fanspeed 100%
[    8.141931] [drm] nouveau 0000:01:00.0: c: core 400MHz shader 800MHz memory 601MHz
[    8.148288] [TTM] Zone  kernel: Available graphics memory: 444362 kiB.
[    8.148296] [TTM] Zone highmem: Available graphics memory: 1036590 kiB.
[    8.148301] [TTM] Initializing pool allocator.
[    8.148327] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[    8.152879] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    8.239920] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.239927] [drm] No driver support for vblank timestamp query.
[    8.297930] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x310000, bo f70d1800
[    8.298135] fbcon: nouveaufb (fb0) is primary device
[    8.372077] cfg80211: World regulatory domain updated:
[    8.372084] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.372092] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.372100] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.372106] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.372113] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.372119] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.342652] Console: switching to colour frame buffer device 160x50
[    9.344105] fb0: nouveaufb frame buffer device
[    9.344110] drm: registered panic notifier
[    9.344123] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   68.289440] Adding 4188156k swap on /dev/sda5.  Priority:-1 extents:1 across:4188156k 
[   68.298896] EXT4-fs (sda1): re-mounted. Opts: (null)
[   68.547885] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   68.664100] loop: module loaded
[   69.777685] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   72.281128] Bluetooth: RFCOMM TTY layer initialized
[   72.281140] Bluetooth: RFCOMM socket layer initialized
[   72.281146] Bluetooth: RFCOMM ver 1.11
[   72.341244] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   72.341252] Bluetooth: BNEP filters: protocol multicast
[   72.423730] lp: driver loaded but no devices found
[   72.431083] ppdev: user-space parallel port driver
[   74.945099] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   75.018648] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   75.029601] sky2 0000:07:00.0: eth0: enabling interface
[   75.030130] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   83.452585] wlan0: authenticate with 00:22:3f:b2:43:a0 (try 1)
[   83.454390] wlan0: authenticated
[   83.458188] wlan0: associate with 00:22:3f:b2:43:a0 (try 1)
[   83.460853] wlan0: RX AssocResp from 00:22:3f:b2:43:a0 (capab=0x411 status=0 aid=4)
[   83.460862] wlan0: associated
[   83.466268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   94.232143] wlan0: no IPv6 routers present

Offline

#5 2012-05-03 19:34:17

falldown
#! Samurai
Registered: 2011-09-01
Posts: 1,727

Re: [SOLVED]uvcvideo failed to initialize the device

sudo apt-get install libglib2.0-dev libusb-dev build-essential gcc automake mercurial

Offline

#6 2012-05-03 19:42:19

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED]uvcvideo failed to initialize the device

Offline

#7 2012-05-04 08:40:42

MrHoggsy
New Member
Registered: 2012-05-02
Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

Thanks for the help I now have a working Webcam smile

Offline

#8 2012-05-04 08:46:25

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [SOLVED]uvcvideo failed to initialize the device

Last edited by xaos52 (2012-05-04 08:47:02)

Offline

#9 2012-12-27 14:54:23

poutinator
New Member
Registered: 2012-11-12
Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

worked fine for me too (on ubuntu 11.10), thanks a lot.

Offline

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.
Server: bleh

Debian Logo