SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 2012-11-21 19:22:06

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Installer reading HD's wrongly

I have new hardware and am now having trouble with Debian Testing, Aptosid and Crunchbang Waldorf. The installer is reading my sda drive as the sdb drive in each case. Other distros such as Mageia, Linuxmint LMDE and Arch are installing normally.
Are others reporting this? Anything I can do?

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0
00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1
00:15.2 PCI bridge: Advanced Micro Devices [AMD] Device 43a2
00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller

Offline

Be excellent to each other!

#2 2012-11-21 19:45:39

fatmac
#! Die Hard
Registered: 2012-11-14
Posts: 1,948

Re: Installer reading HD's wrongly

If you are installing from pendrive, it sometimes happens on a couple of my machines, try using a different usb port.
Set the hdd to boot before the usb (if no OS installed)
(May or may not work for you.)

Last edited by fatmac (2012-11-21 19:48:16)


Linux since 1999
Currently:  AntiX, & Crunchbang.
A good general beginners book for Linux :- http://rute.2038bug.com/index.html.gz
A good Debian read :- http://debian-handbook.info/get/now/

Offline

#3 2012-11-21 19:46:47

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,748

Re: Installer reading HD's wrongly

So install to sdb. The installer does that sometimes. Make sure you install Grub to the right disk designation. If it's read as sdb, then refuse to install Grub automaticaly, you will be presented with a choice to install it manually, and enter /dev/sdb

Offline

#4 2012-11-22 10:51:25

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

Well, intending to install on sdb instead of sda I tried the install again. This time the installer reported the correct partitions so I installed and updated. When I rebooted for the second time I was given a host of errors. I went back to the first kernel but got more errors.
Something in the system is reading the partitions wrongly. Here are some of the errors:

Target filesystem doesn't have requested /sbin/init

/bin/sh:can't access tty; job control turned off

Begin: running/scripts/init-bottom...mount:mounting /dev on /root/dev/failed: no such file or directory

dmesg /fail
adding 8191996K swap on /dev/sda8 swap

(swap is on sdb8)

Offline

#5 2012-11-22 11:03:34

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,748

Re: Installer reading HD's wrongly

So, I'm guessing you have another install, since swap is on sdb8? Can you run

 sudo blkid

from that install? Then mount your broken install to /mnt and give me

cat /mnt/etc/fstab /mnt/boot/grub.cfg

Offline

#6 2012-11-22 16:03:50

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

I don't use grub2 I installed it on root (sda10). I use an old Mepis to boot from.

sudo blkid

 
/dev/sda1: UUID="C42CB6DA2CB6C6A8" TYPE="ntfs" 
/dev/sda2: UUID="f59738cc-ab4c-4d6e-a7e0-e08da90da7a3" TYPE="ext4" 
/dev/sda5: UUID="c4cab5b6-e490-4b32-9c83-716c2a15206c" TYPE="swap" 
/dev/sda6: UUID="3bbccbfa-6496-4bd9-b333-5fd0593a77ee" TYPE="ext4" 
/dev/sda7: UUID="3138c839-563c-466a-a699-2dbdaf0f4422" TYPE="ext4" 
/dev/sda8: UUID="51920c5c-715b-4ee9-a9d7-2c76899494b5" TYPE="ext4" 
/dev/sda9: UUID="90656682-3fee-4b7b-a743-0588b02fd1ac" TYPE="ext4" 
/dev/sda10: UUID="5bfcff25-6eb8-4fd6-b97c-35f1012d726b" TYPE="ext4" 
/dev/sda11: UUID="a24cc556-a90e-49ab-891b-dc65e147ff21" TYPE="ext4" 
/dev/sdb1: UUID="a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b" TYPE="ext4" 
/dev/sdb2: UUID="874687ad-cc84-46a2-898a-aff54436704a" TYPE="ext4" 
/dev/sdb3: UUID="e3b9ad7f-44d9-4b2a-abb0-8dbd0a988839" TYPE="ext4" 
/dev/sdb5: UUID="e04c1604-dd5d-42a5-8685-37afdff91d69" TYPE="ext4" 
/dev/sdb6: UUID="7b20c24f-cff2-43b4-a32d-9fd237a14949" TYPE="ext4" 
/dev/sdb7: UUID="dc8cf242-2648-41a4-8983-f0562cb39313" TYPE="ext4" 
/dev/sdb8: UUID="84ee20a6-ff06-4fa9-ac0d-9d300e5dc4ae" TYPE="swap" 
/dev/sdb9: UUID="d43f98be-f019-49c5-bf0b-b401853ce280" TYPE="ext4" 
/dev/sdb10: UUID="82530706-ef95-4836-997b-1c91c83136c4" TYPE="ext4" 

cat /mnt/sda10/etc/fstab /mnt/sda10/boot/grub.cfg

cat /mnt/sda10/etc/fstab /mnt/sda10/boot/grub.cfg# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda10 during installation
UUID=5bfcff25-6eb8-4fd6-b97c-35f1012d726b /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda11 during installation
UUID=a24cc556-a90e-49ab-891b-dc65e147ff21 /home           ext4    defaults        0       2

/dev/sda1	/mnt/sda1	ntfs	auto,users,exec,noatime	0 0
/dev/sda2	/mnt/sda2	ext4	auto,users,exec,noatime	0 0
/dev/sda6	/mnt/sda6	ext4    auto,users,exec,noatime	0 0
/dev/sda7	/mnt/sda7	ext4    auto,users,exec,noatime	0 0
/dev/sda8	/mnt/sda8	ext4    auto,users,exec,noatime	0 0
/dev/sda9	/mnt/sda9	ext4    auto,users,exec,noatime	0 0
/dev/sdb1	/mnt/sdb1	ext4	auto,users,exec,noatime	0 0
/dev/sdb2	/mnt/sdb2	ext4	auto,users,exec,noatime	0 0
/dev/sdb3	/mnt/sdb3	ext4	auto,users,exec,noatime	0 0
/dev/sdb5	/mnt/sdb5	ext4	auto,users,exec,noatime	0 0
/dev/sdb6	/mnt/sdb6	ext4	auto,users,exec,noatime	0 0
/dev/sdb7	/mnt/sdb7	ext4	auto,users,exec,noatime	0 0
/dev/sdb9	/mnt/sdb9	ext4	auto,users,exec,noatime	0 0
/dev/sdb10	/mnt/sdb10	ext4	auto,users,exec,noatime	0 0

# swap was on /dev/sdb8 during installation
UUID=84ee20a6-ff06-4fa9-ac0d-9d300e5dc4ae none            swap    sw              0       0
/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
cat: /mnt/sda10/boot/grub.cfg: No such file or directory

Offline

#7 2012-11-22 17:24:17

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,748

Re: Installer reading HD's wrongly

Then it would be

cat /boot/grub/menu.lst

Offline

#8 2012-11-23 15:52:06

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

Do you mean the menu.lst of the old Mepis I am booting from?

timeout 5
color cyan/blue white/blue
foreground ffffff
background 0639a1
default 6

gfxmenu /boot/grub/message

title MEPIS at sda2, newest kernel
root (hd0,1)
kernel /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=normal  
initrd /boot/initrd.img
boot

title Win Vista/7 (loader)  (sda1)
rootnoverify (hd0,0)
chainloader +1

title Mint XFCE4 (sda6)
root (hd0,5)
kernel /boot/vmlinuz-3.2.0-23-generic root=/dev/sda6 
initrd /boot/initrd.img-3.2.0-23-generic

title Mint PekWm (sda8) 
root (hd0,7)
kernel /boot/vmlinuz-3.2.0-33-generic root=/dev/sda8  
initrd /boot/initrd.img-3.2.0-33-generic

title Waldorf Pekwm (sda10)
root (hd0,9)
kernel /boot/vmlinuz-3.2.0-3-amd64 root=UUID=5bfcff25-6eb8-4fd6-b97c-35f1012d726b
initrd /boot/initrd.img-3.2.0-3-amd64

title Manjaro Fluxbox (sdb9)
root (hd1,8)
kernel /boot/vmlinuz-34-x86_64 root=/dev/sdb9
initrd /boot/initramfs-34-x86_64.img

title Mint Fluxbox (sdb6)
root (hd1,5)
kernel /boot/vmlinuz-3.2.0-33-generic root=/dev/sdb6 
initrd /boot/initrd.img-3.2.0-33-generic

title Archbang Fluxbox (sdb3)
root (hd1,2)
kernel /boot/vmlinuz-linux root=/dev/sdb3 quiet
initrd /boot/initramfs-linux.img

title Mint Openbox (sdb1)
root (hd1,0)
kernel /boot/vmlinuz-3.2.0-23-generic root=/dev/sdb1
initrd /boot/initrd.img-3.2.0-23-generic

Offline

#9 2012-11-23 16:20:24

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,748

Re: Installer reading HD's wrongly

When you boot and get to Grub, hit "e" to edit the line for Waldorf, navigate to the kernel line, and change root=long string of numbers to root=/dev/sda10. Then hit Ctrl X to boot. It's my best guess, I'm not that familiar with Grub one, and everything else seems to be in order.

Offline

#10 2012-11-23 21:11:36

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

No luck. The error message is:

/bin/sh: can't access tty; job control turned off

It appears to be the same for all debian based distros. I had no problems of any kind before the hardware upgrade.
Something to do with the EFI Bios?
As I said Aptosid, Crunchbang and Debian itself are all reading the partitions wrongly before anything is installed.

Offline

#11 2012-11-23 21:19:15

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,748

Re: Installer reading HD's wrongly

I have no idea to be honest. If I think of anything else, I'll let you know.

Offline

#12 2012-11-23 23:10:05

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

I was wrong about only Debian based OS's misreading the partitions. I tried a PCLinuxOS live CD today, same thing.

Offline

#13 2012-11-24 09:51:33

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: Installer reading HD's wrongly

Boot from the old Mepis install. Download and run the bootinfo script from my signature and post the output.

Online

#14 2012-11-25 14:01:23

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

Thanks doc,
I have downloaded and extracted your file but since I don't know much about running scripts could you give me exact instructions please.

I think the problem is the EFI mobo. Is there anything I can add at boot which would solve this? Or anything I can change in the Crunchbang .iso before I burn it?
The Manjora installation offers a selection for EFI and it works fine. Sorry if I am not making sense, this is a bit above my paygrade!

Offline

#15 2012-11-25 15:37:22

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: Installer reading HD's wrongly

I have downloaded and extracted your file but since I don't know much about running scripts could you give me exact instructions please.

Open a terminal window.
cd to the directory where you downloaded the script.
Make it executable:

chmod +x ./bootinfoscript

Then run it

Boot Info Script 0.61      [1 April 2012]
  Last git commit:         db4dbe5 Detect grub2's core.img located at /boot/grub2/i386-pc/core.img.
  Retrieved from git on:   2012-07-02 18:41:51

Please use "sudo" or become "root" to run this script.

  Run the script as sudoer:

    sudo ./bootinfoscript <outputfile>

  or if your operating system does not use sudo:

    su -
    ./bootinfoscript <outputfile>

For more info, see the help:

    ./bootinfoscript --help

Post the output.

I have no experience with EFI mobos.
Hope someone who has steps up.

Last edited by xaos52 (2012-11-25 15:38:13)

Online

#16 2012-11-25 18:37:06

fatmac
#! Die Hard
Registered: 2012-11-14
Posts: 1,948

Re: Installer reading HD's wrongly

addr wrote:

The Manjora installation offers a selection for EFI and it works fine. Sorry if I am not making sense, this is a bit above my paygrade!

If this installation created an EFI partition table I don't think you can get at your other distros if they were setup using a DOS partition table.

You either have a DOS partition table or you have a GPT; if you installed Manjora after the other distros & used a GPT partition table the old DOS partition table will have been overwritten.

http://en.wikipedia.org/wiki/Extensible … NU.2FLinux

Last edited by fatmac (2012-11-25 18:38:14)


Linux since 1999
Currently:  AntiX, & Crunchbang.
A good general beginners book for Linux :- http://rute.2038bug.com/index.html.gz
A good Debian read :- http://debian-handbook.info/get/now/

Offline

#17 2012-11-26 12:44:25

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

bootinfoscript

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Grub Legacy (v0.97) is installed in the MBR of /dev/sda and looks on the 
    same drive in partition #2 for /boot/grub/stage2 and /boot/grub/menu.lst.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  MEPIS Linux 8.5
    Boot files:        /boot/grub/menu.lst /etc/fstab

sda3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sda6 
                       and looks at sector 137475404 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos6)/boot/grub on this drive.
    Operating System:  Linux Mint 13 Maya
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sda8 
                       and looks at sector 236264578 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos8)/boot/grub on this drive.
    Operating System:  Linux Mint 13 Maya
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda10: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of 
                       sda10 and looks at sector 346624564 of the same hard 
                       drive for core.img. core.img is at this location and 
                       looks for (,msdos10)/boot/grub on this drive.
    Operating System:  Linux Mint 13 Maya
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Manjaro Linux () ()
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/syslinux/syslinux.cfg

sdb7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Manjaro Linux () ()
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/syslinux/syslinux.cfg

sdb9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb10: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 250.1 GB, 250058268160 bytes
195 heads, 54 sectors/track, 46381 cylinders, total 488395055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             54   116,649,983   116,649,930  83 Linux
/dev/sda2         116,649,984   124,020,735     7,370,752  83 Linux
/dev/sda3         124,022,392   488,390,655   364,368,264   5 Extended
/dev/sda5         124,022,394   132,035,669     8,013,276  82 Linux swap / Solaris
/dev/sda6         132,035,724   152,516,519    20,480,796  83 Linux
/dev/sda7         152,516,574   235,808,819    83,292,246  83 Linux
/dev/sda8         235,808,874   257,026,769    21,217,896  83 Linux
/dev/sda9         257,026,824   340,319,069    83,292,246  83 Linux
/dev/sda10        340,319,124   362,823,679    22,504,556  83 Linux
/dev/sda11        362,825,728   488,390,655   125,564,928  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048    20,482,047    20,480,000  83 Linux
/dev/sdb2          20,482,048    20,502,527        20,480  82 Linux swap / Solaris
/dev/sdb3    *     20,502,528    45,078,527    24,576,000  83 Linux
/dev/sdb4          45,078,528   976,773,119   931,694,592   5 Extended
/dev/sdb5          45,080,576   127,000,575    81,920,000  83 Linux
/dev/sdb6         127,002,624   151,578,623    24,576,000  83 Linux
/dev/sdb7         151,580,672   233,500,671    81,920,000  83 Linux
/dev/sdb8         233,502,720   253,982,719    20,480,000  83 Linux
/dev/sdb9         253,984,768   335,904,767    81,920,000  83 Linux
/dev/sdb10        335,906,816   360,482,815    24,576,000  83 Linux
/dev/sdb11        360,484,864   442,404,863    81,920,000  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        f41908fc-58d6-4d99-aa2d-0af7f1f6b01e   ext4       
/dev/sda10       888f93d8-aabe-4ab1-a2d4-9fd080e39bb1   ext4       
/dev/sda11       9be140c1-2678-467d-b74b-8c72d99e6600   ext4       
/dev/sda2        d373ca90-a6d9-44c4-a212-3d59136f1bab   ext4       
/dev/sda5        aa949b61-6588-4bb9-8bcf-00adf008616a   swap       
/dev/sda6        3bbccbfa-6496-4bd9-b333-5fd0593a77ee   ext4       
/dev/sda7        3138c839-563c-466a-a699-2dbdaf0f4422   ext4       
/dev/sda8        51920c5c-715b-4ee9-a9d7-2c76899494b5   ext4       
/dev/sda9        90656682-3fee-4b7b-a743-0588b02fd1ac   ext4       
/dev/sdb1        3b43c2a5-8571-415a-90e9-92925a0d326a   ext4       
/dev/sdb10       06feecc2-a558-4c2c-a364-f6a0178da277   ext4       
/dev/sdb11       c4bd2d0e-f2d3-461c-9d7f-47ef39abf5df   ext4       
/dev/sdb2        f39be8fa-20a2-49fa-a9f4-0a3fec5aa26e   swap       
/dev/sdb3        88c53091-25cc-4347-aab9-c49613fe71b3   ext4       
/dev/sdb5        e9db3f90-ae26-414b-8b6f-d812e64c763e   ext4       
/dev/sdb6        742a8eae-f18b-40df-8b1e-5f761337a835   ext4       man
/dev/sdb7        c4232987-6709-41f7-9911-a4586a4b326f   ext4       
/dev/sdb8        8827b223-6e83-482f-a83c-98a6d30e8207   ext4       mansan
/dev/sdb9        dc198916-4136-46fa-802e-605a3c99502a   ext4       mansan1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda10       /                        ext4       (rw,errors=remount-ro)
/dev/sda11       /home                    ext4       (rw)
/dev/sda2        /mnt/sda2                ext4       (rw,nosuid,nodev,noatime)
/dev/sda6        /mnt/sda6                ext4       (rw,nosuid,nodev,noatime)
/dev/sda7        /mnt/sda7                ext4       (rw,nosuid,nodev,noatime)
/dev/sda8        /mnt/sda8                ext4       (rw,nosuid,nodev,noatime)
/dev/sda9        /mnt/sda9                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb10       /mnt/sdb10               ext4       (rw,nosuid,nodev,noatime)
/dev/sdb11       /mnt/sdb11               ext4       (rw,nosuid,nodev,noatime)
/dev/sdb1        /mnt/sdb1                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb3        /mnt/sdb3                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb5        /mnt/sdb5                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb6        /mnt/sdb6                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb7        /mnt/sdb7                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb8        /mnt/sdb8                ext4       (rw,nosuid,nodev,noatime)
/dev/sdb9        /mnt/sdb9                ext4       (rw,nosuid,nodev,noatime)


=========================== sda2/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
timeout 10
color cyan/blue white/blue
foreground ffffff
background 0639a1
default 2
gfxmenu /boot/grub/message

#title MEPIS at sda2, newest kernel
#root (hd0,1)
#kernel /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=788 
#initrd /boot/initrd.img
#boot

title MEPIS at sda2, kernel 2.6.32-1-mepis64-smp
root (hd0,1)
kernel /boot/vmlinuz-2.6.32-1-mepis64-smp root=/dev/sda2 nomce quiet splash vga=788 
initrd /boot/initrd.img-2.6.32-1-mepis64-smp
boot

title Mint Pekwm (sda8)
root (hd0,7)
kernel /boot/vmlinuz-3.2.0-23-generic root=/dev/sda8
initrd /boot/initrd.img-3.2.0-23-generic

title Mint Fluxbox (sda10)
root (hd0,9)
kernel /boot/vmlinuz-3.2.0-23-generic root=/dev/sda10
initrd /boot/initrd.img-3.2.0-23-generic

title Mint XFCE (sda6)
root (hd0,5)
kernel /boot/vmlinuz-3.2.0-23-generic root=/dev/sda6
initrd /boot/initrd.img-3.2.0-23-generic

title Manjaro Pekwm (sdb6)
root (hd1,5)
kernel /boot/vmlinuz-34-x86_64 root=/dev/sdb6
initrd /boot/initramfs-34-x86_64.img

title Manjaro Fluxbox (sdb8)
root (hd1,7)
kernel /boot/vmlinuz-34-x86_64 root=/dev/sdb8
initrd /boot/initramfs-34-x86_64.img



--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# Pluggable devices are handled by uDev, they are not in fstab
/dev/sda2 / ext4 defaults,noatime 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0622 0 0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  55.753623962 = 59.864997888   boot/grub/menu.lst                             1
  55.756099701 = 59.867656192   boot/grub/stage2                               1
  57.422557831 = 61.657001984   boot/initrd.img                                1
  57.422557831 = 61.657001984   boot/initrd.img-2.6.32-1-mepis64-smp           1
  55.769401550 = 59.881938944   boot/vmlinuz                                   1
  55.769401550 = 59.881938944   boot/vmlinuz-2.6.32-1-mepis64-smp              1

=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos6)'
  search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
  set locale_dir=($root)/boot/grub/locale
  set lang=en_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'LinuxMint, with Linux 3.2.0-23-generic' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-23-generic
}
menuentry 'LinuxMint, with Linux 3.2.0-23-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	echo	'Loading Linux 3.2.0-23-generic ...'
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root C42CB6DA2CB6C6A8
	chainloader +1
}
menuentry "Mageia Fluxbox (sda10) (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=Mageia_Fluxbox_(sda10) root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a
	initrd (hd0,9)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 nokmsboot failsafe
	initrd (hd0,9)/boot/initrd.img
}
menuentry "linux (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "desktop 3.3.8-2.mga2 (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz-3.3.8-desktop-2.mga2 BOOT_IMAGE=desktop_3.3.8-2.mga2 root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd-3.3.8-desktop-2.mga2.img
}
menuentry "MEPIS at sda2, newest kernel (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=normal
	initrd /boot/initrd.img
}
menuentry "Mageia PekWm (sda10) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz BOOT_IMAGE=Mageia_Fluxbox_(sda10) root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 nokmsboot quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "Mageia Openbox (sdb9) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz BOOT_IMAGE=lMageia_Openbox_(sdb9) root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c nokmsboot quiet resume=UUID=84bc33f0-964c-4b60-87d1-254fb42db366 vga=788
	initrd (hd1,8)/boot/initrd.img
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8) (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8) -- recovery mode (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8) (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8) -- recovery mode (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb1) (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb1) -- recovery mode (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) -- recovery mode (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Mageia Openbox (sdb9) (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root bfa67d0d-9053-4c2a-898b-01f6015faa4c
	linux /boot/vmlinuz BOOT_IMAGE=Mageia_Openbox_(sdb9) root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c splash quiet resume=UUID=84bc33f0-964c-4b60-87d1-254fb42db366 vga=788
	initrd (hd1,8)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root bfa67d0d-9053-4c2a-898b-01f6015faa4c
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c resume=UUID=84bc33f0-964c-4b60-87d1-254fb42db366
	initrd (hd1,8)/boot/initrd.img
}
menuentry "failsafe (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root bfa67d0d-9053-4c2a-898b-01f6015faa4c
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c nokmsboot failsafe
	initrd (hd1,8)/boot/initrd.img
}
menuentry "linux (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root bfa67d0d-9053-4c2a-898b-01f6015faa4c
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c splash quiet resume=UUID=84bc33f0-964c-4b60-87d1-254fb42db366 vga=788
	initrd (hd1,8)/boot/initrd.img
}
menuentry "desktop 3.3.8-2.mga2 (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root bfa67d0d-9053-4c2a-898b-01f6015faa4c
	linux /boot/vmlinuz-3.3.8-desktop-2.mga2 BOOT_IMAGE=desktop_3.3.8-2.mga2 root=UUID=bfa67d0d-9053-4c2a-898b-01f6015faa4c splash quiet resume=UUID=84bc33f0-964c-4b60-87d1-254fb42db366 vga=788
	initrd (hd1,8)/boot/initrd-3.3.8-desktop-2.mga2.img
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda6 during installation
UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda7 during installation
UUID=3138c839-563c-466a-a699-2dbdaf0f4422 /home           ext4    defaults        0       2
# swap was on /dev/sdb8 during installation
UUID=84bc33f0-964c-4b60-87d1-254fb42db366 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  65.553407669 = 70.387435520   boot/grub/core.img                             1
  65.553422928 = 70.387451904   boot/grub/grub.cfg                             1
  67.910249710 = 72.918075392   boot/initrd.img-3.2.0-23-generic               1
  66.182916641 = 71.063365632   boot/vmlinuz-3.2.0-23-generic                  1
  67.910249710 = 72.918075392   initrd.img                                     1
  66.182916641 = 71.063365632   vmlinuz                                        1

=========================== sda8/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos8)'
  search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
  set locale_dir=($root)/boot/grub/locale
  set lang=en_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sda8)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux	/boot/vmlinuz-3.2.0-33-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-33-generic
}
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sda8) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	echo	'Loading Linux 3.2.0-33-generic ...'
	linux	/boot/vmlinuz-3.2.0-33-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-33-generic
}
submenu "Previous Linux versions" {
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux	/boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-32-generic
}
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	echo	'Loading Linux 3.2.0-32-generic ...'
	linux	/boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-32-generic
}
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-23-generic
}
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	echo	'Loading Linux 3.2.0-23-generic ...'
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-23-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root C42CB6DA2CB6C6A8
	chainloader +1
}
menuentry "Mageia Fluxbox (sda10) (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=Mageia_Fluxbox_(sda10) root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a
	initrd (hd0,9)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 nokmsboot failsafe
	initrd (hd0,9)/boot/initrd.img
}
menuentry "linux (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "desktop 3.3.8-2.mga2 (on /dev/sda10)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root c420835b-9ca1-4b14-ac84-874c1899eb02
	linux /boot/vmlinuz-3.3.8-desktop-2.mga2 BOOT_IMAGE=desktop_3.3.8-2.mga2 root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 splash quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd-3.3.8-desktop-2.mga2.img
}
menuentry "MEPIS at sda2, newest kernel (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=normal
	initrd /boot/initrd.img
}
menuentry "Mageia PekWm (sda10) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz BOOT_IMAGE=Mageia_Fluxbox_(sda10) root=UUID=c420835b-9ca1-4b14-ac84-874c1899eb02 nokmsboot quiet resume=UUID=36b6e43b-9e5d-47c8-9752-18767ef1112a vga=788
	initrd (hd0,9)/boot/initrd.img
}
menuentry "LinuxMint, with Linux 3.2.0-23-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "LinuxMint, with Linux 3.2.0-23-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb1) (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb1) -- recovery mode (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=a9f2ed0e-8d2c-4ffb-86e2-7ce1332e128b ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467 (on /dev/sdb3)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos3)'
	search --no-floppy --fs-uuid --set=root e3b9ad7f-44d9-4b2a-abb0-8dbd0a988839
	linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
	initrd /boot/initramfs-linux.img
}
menuentry "Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467 (on /dev/sdb3)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos3)'
	search --no-floppy --fs-uuid --set=root e3b9ad7f-44d9-4b2a-abb0-8dbd0a988839
	linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
	initrd /boot/initramfs-linux-fallback.img
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sdb6) (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sdb6) -- recovery mode (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) -- recovery mode (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 9, 2.6.32-22-generic (/dev/sdb9) (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root 3e1445bb-906c-43f2-bba3-1d9450e54b05
	linux /boot/vmlinuz-2.6.32-22-generic root=UUID=3e1445bb-906c-43f2-bba3-1d9450e54b05 ro quiet splash
	initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry "Linux Mint 9, 2.6.32-22-generic (/dev/sdb9) -- recovery mode (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root 3e1445bb-906c-43f2-bba3-1d9450e54b05
	linux /boot/vmlinuz-2.6.32-22-generic root=UUID=3e1445bb-906c-43f2-bba3-1d9450e54b05 ro single
	initrd /boot/initrd.img-2.6.32-22-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda8/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda8 during installation
#UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 /               ext4    #errors=remount-ro 0       1
# /home was on /dev/sda9 during installation
#UUID=90656682-3fee-4b7b-a743-0588b02fd1ac /home           ext4    #defaults        0       2
/dev/sda8	/	ext4	errors=remount-ro	0 1
/dev/sda9	/home   ext4    defaults		0 2
# swap was on /dev/sda5 during installation
/dev/sda5       none            swap    sw              0 0

/dev/sda2	/mnt/sda2	ext4	auto,users,exec,noatime	0 0
/dev/sda6	/mnt/sda6	ext4    auto,users,exec,noatime	0 0
/dev/sda7	/mnt/sda7	ext4    auto,users,exec,noatime	0 0
/dev/sda10	/mnt/sda10	ext4    auto,users,exec,noatime	0 0
/dev/sda11	/mnt/sda11	ext4	auto,users,exec,noatime	0 0
/dev/sdb1	/mnt/sdb1	ext4    auto,users,exec,noatime	0 0
/dev/sdb3	/mnt/sdb3	ext4    auto,users,exec,noatime	0 0
/dev/sdb5	/mnt/sdb5	ext4    auto,users,exec,noatime	0 0
/dev/sdb6	/mnt/sdb6	ext4    auto,users,exec,noatime	0 0
/dev/sdb7	/mnt/sdb7	ext4    auto,users,exec,noatime	0 0
/dev/sdb8	/mnt/sdb8	ext4	auto,users,exec,noatime	0 0
/dev/sdb9	/mnt/sdb9	ext4	auto,users,exec,noatime	0 0
/dev/sdb10	/mnt/sdb10	ext4	auto,users,exec,noatime	0 0
/dev/sdb11	/mnt/sdb11	ext4	auto,users,exec,noatime	0 0

--------------------------------------------------------------------------------

=================== sda8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 112.659756660 = 120.967492608  boot/grub/core.img                             1
 118.087563515 = 126.795555840  boot/grub/grub.cfg                             1
 118.203213692 = 126.919734272  boot/initrd.img-3.2.0-23-generic               2
 116.543839455 = 125.137994752  boot/initrd.img-3.2.0-32-generic               2
 118.213349342 = 126.930617344  boot/initrd.img-3.2.0-33-generic               2
 120.841568947 = 129.752646656  boot/vmlinuz-3.2.0-23-generic                  1
 115.447060585 = 123.960337408  boot/vmlinuz-3.2.0-32-generic                  1
 118.060341835 = 126.766326784  boot/vmlinuz-3.2.0-33-generic                  1
 118.060341835 = 126.766326784  vmlinuz                                        1
 115.447060585 = 123.960337408  vmlinuz.old                                    1

========================== sda10/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos10)'
  search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
  set locale_dir=($root)/boot/grub/locale
  set lang=en_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda10)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=888f93d8-aabe-4ab1-a2d4-9fd080e39bb1 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.2.0-23-generic
}
menuentry 'Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda10) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
	echo	'Loading Linux 3.2.0-23-generic ...'
	linux	/boot/vmlinuz-3.2.0-23-generic root=UUID=888f93d8-aabe-4ab1-a2d4-9fd080e39bb1 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos10)'
	search --no-floppy --fs-uuid --set=root 888f93d8-aabe-4ab1-a2d4-9fd080e39bb1
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root C42CB6DA2CB6C6A8
	chainloader +1
}
menuentry "MEPIS at sda2, newest kernel (on /dev/sda2)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos2)'
	search --no-floppy --fs-uuid --set=root f59738cc-ab4c-4d6e-a7e0-e08da90da7a3
	linux /boot/vmlinuz root=/dev/sda2 nomce quiet splash vga=normal
	initrd /boot/initrd.img
}
menuentry "LinuxMint, with Linux 3.2.0-23-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "LinuxMint, with Linux 3.2.0-23-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos6)'
	search --no-floppy --fs-uuid --set=root 3bbccbfa-6496-4bd9-b333-5fd0593a77ee
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=3bbccbfa-6496-4bd9-b333-5fd0593a77ee ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sda8) (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sda8) -- recovery mode (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8) (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-32-generic (/dev/sda8) -- recovery mode (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-32-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8) (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sda8) -- recovery mode (on /dev/sda8)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 51920c5c-715b-4ee9-a9d7-2c76899494b5
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=51920c5c-715b-4ee9-a9d7-2c76899494b5 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Manjaro Linux (Kernel 3.4.19-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-true-26c595a8-b856-46ed-9822-1ab3b2f4c5ac (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 26c595a8-b856-46ed-9822-1ab3b2f4c5ac
	linux /boot/vmlinuz-34-x86_64 root=UUID=26c595a8-b856-46ed-9822-1ab3b2f4c5ac ro quiet
	initrd /boot/initramfs-34-x86_64.img
}
menuentry "Manjaro Linux (Kernel 3.4.19-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-fallback-26c595a8-b856-46ed-9822-1ab3b2f4c5ac (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 26c595a8-b856-46ed-9822-1ab3b2f4c5ac
	linux /boot/vmlinuz-34-x86_64 root=UUID=26c595a8-b856-46ed-9822-1ab3b2f4c5ac ro quiet
	initrd /boot/initramfs-34-x86_64-fallback.img
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sdb6) (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-33-generic (/dev/sdb6) -- recovery mode (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-33-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-33-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Linux Mint 13 Xfce 64-bit, 3.2.0-23-generic (/dev/sdb6) -- recovery mode (on /dev/sdb6)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos6)'
	search --no-floppy --fs-uuid --set=root 7b20c24f-cff2-43b4-a32d-9fd237a14949
	linux /boot/vmlinuz-3.2.0-23-generic root=UUID=7b20c24f-cff2-43b4-a32d-9fd237a14949 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry "Manjaro Linux (Kernel 3.4.19-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-true-a27dc0c5-7f46-426a-b502-43a9af1ceac5 (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root a27dc0c5-7f46-426a-b502-43a9af1ceac5
	linux /boot/vmlinuz-34-x86_64 root=UUID=a27dc0c5-7f46-426a-b502-43a9af1ceac5 ro quiet
	initrd /boot/initramfs-34-x86_64.img
}
menuentry "Manjaro Linux (Kernel 3.4.19-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-fallback-a27dc0c5-7f46-426a-b502-43a9af1ceac5 (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set=root a27dc0c5-7f46-426a-b502-43a9af1ceac5
	linux /boot/vmlinuz-34-x86_64 root=UUID=a27dc0c5-7f46-426a-b502-43a9af1ceac5 ro quiet
	initrd /boot/initramfs-34-x86_64-fallback.img
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda10/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda10 during installation
UUID=888f93d8-aabe-4ab1-a2d4-9fd080e39bb1 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda11 during installation
UUID=9be140c1-2678-467d-b74b-8c72d99e6600 /home           ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=c4cab5b6-e490-4b32-9c83-716c2a15206c none            swap    sw              0       0
 
#/dev/sda1	/mnt/sda1	ntfs	auto,users,exec,noatime	0 0
/dev/sda2	/mnt/sda2	ext4	auto,users,exec,noatime	0 0
/dev/sda6	/mnt/sda6	ext4    auto,users,exec,noatime	0 0
/dev/sda7	/mnt/sda7	ext4    auto,users,exec,noatime	0 0
/dev/sda8	/mnt/sda8	ext4    auto,users,exec,noatime	0 0
/dev/sda9	/mnt/sda9	ext4    auto,users,exec,noatime	0 0
/dev/sdb1       /mnt/sdb1	ext4	auto,users,exec,noatime 0 0
/dev/sdb3	/mnt/sdb3	ext4    auto,users,exec,noatime	0 0
/dev/sdb5	/mnt/sdb5	ext4    auto,users,exec,noatime	0 0
/dev/sdb6	/mnt/sdb6	ext4    auto,users,exec,noatime	0 0
/dev/sdb7	/mnt/sdb7	ext4    auto,users,exec,noatime	0 0
/dev/sdb8	/mnt/sdb8	ext4	auto,users,exec,noatime	0 0
/dev/sdb9	/mnt/sdb9	ext4	auto,users,exec,noatime	0 0
/dev/sdb10	/mnt/sdb10	ext4	auto,users,exec,noatime	0 0
/dev/sdb11	/mnt/sdb11	ext4	auto,users,exec,noatime	0 0



--------------------------------------------------------------------------------

=================== sda10: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

 165.283498764 = 177.471805440  boot/grub/core.img                             1
 165.283510208 = 177.471817728  boot/grub/grub.cfg                             1
 166.140474319 = 178.391975936  boot/initrd.img-3.2.0-23-generic               2
 168.718931198 = 181.160572928  boot/vmlinuz-3.2.0-23-generic                  1
 166.140474319 = 178.391975936  initrd.img                                     2
 168.718931198 = 181.160572928  vmlinuz                                        1

=========================== sdb6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="${saved_entry}"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

set menu_color_normal=light-gray/black
set menu_color_highlight=green/black

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
else
  search --no-floppy --fs-uuid --set=root e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
else
  search --no-floppy --fs-uuid --set=root e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
fi
insmod png
background_image -m stretch /usr/share/grub/background.png
set timeout=5
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Manjaro Linux (Kernel: 3.4.18-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.18-1-MANJARO x64-true-e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c' {
	savedefault
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
	else
	  search --no-floppy --fs-uuid --set=root e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
	fi
	echo	'Loading Linux 3.4.18-1-MANJARO x64 ...'
	linux	/boot/vmlinuz-34-x86_64 root=UUID=e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-34-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.4.18-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.18-1-MANJARO x64-fallback-e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
	else
	  search --no-floppy --fs-uuid --set=root e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c
	fi
	echo	'Loading Linux 3.4.18-1-MANJARO x64 ...'
	linux	/boot/vmlinuz-34-x86_64 root=UUID=e45c64b1-018a-42f3-9ef4-1c86ddbcfa4c ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-34-x86_64-fallback.img
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Manjaro Linux (0.8.2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-4e838674-ab30-4315-8ee0-2a3a95a201df' {
	savedefault
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
	else
	  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
	fi
	linux /boot/vmlinuz-37-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
	initrd /boot/initramfs-37-i686.img
}
submenu 'Advanced options for Manjaro Linux (0.8.2)' $menuentry_id_option 'osprober-gnulinux-advanced-4e838674-ab30-4315-8ee0-2a3a95a201df' {
	menuentry 'Manjaro Linux (Kernel 3.7rc5-1-MANJARO x32) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-37-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-37-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-37-i686.img
	}
	menuentry 'Manjaro Linux (Kernel 3.7rc5-1-MANJARO x32 - fallback initramfs) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-37-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-37-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-37-i686-fallback.img
	}
	menuentry 'Manjaro Linux (Kernel 3.6.7-0-MANJARO x32) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-36-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-36-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-36-i686.img
	}
	menuentry 'Manjaro Linux (Kernel 3.6.7-0-MANJARO x32 - fallback initramfs) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-36-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-36-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-36-i686-fallback.img
	}
	menuentry 'Manjaro Linux (Kernel 3.4.19-0-MANJARO x32) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-34-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-34-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-34-i686.img
	}
	menuentry 'Manjaro Linux (Kernel 3.4.19-0-MANJARO x32 - fallback initramfs) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-34-i686--4e838674-ab30-4315-8ee0-2a3a95a201df' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  4e838674-ab30-4315-8ee0-2a3a95a201df
		else
		  search --no-floppy --fs-uuid --set=root 4e838674-ab30-4315-8ee0-2a3a95a201df
		fi
		linux /boot/vmlinuz-34-i686 root=UUID=4e838674-ab30-4315-8ee0-2a3a95a201df ro mhwdfb=uvesafb:1280x1024-32 quiet splash add_efi_memmap resume=/dev/disk/by-uuid/6cc4a375-bf17-4563-b4b8-28e5113e8585
		initrd /boot/initramfs-34-i686-fallback.img
	}
}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb6/etc/fstab: ================================

--------------------------------------------------------------------------------
# 
# /etc/fstab: static file system information
#
# <file system>	<dir>	<type>	<options>	<dump>	<pass>
tmpfs		/tmp	tmpfs	nodev,nosuid	0	0
# DEVICE DETAILS: /dev/sdb2 UUID=f39be8fa-20a2-49fa-a9f4-0a3fec5aa26e LABEL=
# DEVICE DETAILS: /dev/sdb6 UUID=742a8eae-f18b-40df-8b1e-5f761337a835 LABEL=man
# DEVICE DETAILS: /dev/sdb7 UUID=c4232987-6709-41f7-9911-a4586a4b326f LABEL=
/dev/sdb2 swap swap defaults 0 0
/dev/sdb6 / ext4 defaults 0 1
/dev/sdb7 /home ext4 defaults 0 1
--------------------------------------------------------------------------------

======================= sdb6/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
#   * menu.c32 - provides a text menu
#   * vesamenu.c32 - provides a graphical menu
#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
#   * hdt.c32 - hardware detection tool
#   * reboot.c32 - reboots the system
#   * poweroff.com - shutdown the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples

DEFAULT arch
PROMPT 0        # Set to 1 if you always want to display the boot: prompt 
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl

# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux 
UI menu.c32
#UI vesamenu.c32

# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border       30;44   #40ffffff #a0000000 std
MENU COLOR title        1;36;44 #9033ccff #a0000000 std
MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel        37;44   #50ffffff #a0000000 std
MENU COLOR help         37;40   #c0ffffff #a0000000 std
MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07        37;40   #90ffffff #a0000000 std
MENU COLOR tabmsg       31;40   #30ffffff #00000000 std

# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

LABEL arch
	MENU LABEL Arch Linux
	LINUX ../vmlinuz-linux
	APPEND root=/dev/sda3 ro
	INITRD ../initramfs-linux.img

LABEL archfallback
	MENU LABEL Arch Linux Fallback
	LINUX ../vmlinuz-linux
	APPEND root=/dev/sda3 ro
	INITRD ../initramfs-linux-fallback.img

#LABEL windows
#        MENU LABEL Windows
#        COM32 chain.c32
#        APPEND hd0 1

LABEL hdt
        MENU LABEL HDT (Hardware Detection Tool)
        COM32 hdt.c32
 
LABEL reboot
        MENU LABEL Reboot
        COM32 reboot.c32
 
LABEL off
        MENU LABEL Power Off
        COMBOOT poweroff.com
--------------------------------------------------------------------------------

=================== sdb6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  62.687767029 = 67.310477312   boot/grub/grub.cfg                             1
  62.438377380 = 67.042697216   boot/initramfs-34-x86_64-fallback.img          2
  63.210769653 = 67.872047104   boot/initramfs-34-x86_64.img                   1
  62.687755585 = 67.310465024   boot/vmlinuz-34-x86_64                         1

================= sdb6: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

  62.687931061 = 67.310653440   boot/syslinux/syslinux.cfg                     1

=========================== sdb8/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="${saved_entry}"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

set menu_color_normal=light-gray/black
set menu_color_highlight=green/black

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  8827b223-6e83-482f-a83c-98a6d30e8207
else
  search --no-floppy --fs-uuid --set=root 8827b223-6e83-482f-a83c-98a6d30e8207
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd1,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  8827b223-6e83-482f-a83c-98a6d30e8207
else
  search --no-floppy --fs-uuid --set=root 8827b223-6e83-482f-a83c-98a6d30e8207
fi
insmod png
background_image -m stretch /usr/share/grub/background.png
set timeout=5
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Manjaro Linux (Kernel: 3.4.19-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-true-8827b223-6e83-482f-a83c-98a6d30e8207' {
	savedefault
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  8827b223-6e83-482f-a83c-98a6d30e8207
	else
	  search --no-floppy --fs-uuid --set=root 8827b223-6e83-482f-a83c-98a6d30e8207
	fi
	echo	'Loading Linux 3.4.19-1-MANJARO x64 ...'
	linux	/boot/vmlinuz-34-x86_64 root=UUID=8827b223-6e83-482f-a83c-98a6d30e8207 ro  GRUB_CMDLINE_LINUX_DEFAULT= resume=/dev/disk/by-uuid/f39be8fa-20a2-49fa-a9f4-0a3fec5aa26e
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-34-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.4.19-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.4.19-1-MANJARO x64-fallback-8827b223-6e83-482f-a83c-98a6d30e8207' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  8827b223-6e83-482f-a83c-98a6d30e8207
	else
	  search --no-floppy --fs-uuid --set=root 8827b223-6e83-482f-a83c-98a6d30e8207
	fi
	echo	'Loading Linux 3.4.19-1-MANJARO x64 ...'
	linux	/boot/vmlinuz-34-x86_64 root=UUID=8827b223-6e83-482f-a83c-98a6d30e8207 ro  GRUB_CMDLINE_LINUX_DEFAULT= resume=/dev/disk/by-uuid/f39be8fa-20a2-49fa-a9f4-0a3fec5aa26e
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-34-x86_64-fallback.img
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" --class memtest86 --class gnu --class tool {
  insmod part_msdos
  insmod ext2
  set root='hd1,msdos8'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  8827b223-6e83-482f-a83c-98a6d30e8207
  else
    search --no-floppy --fs-uuid --set=root 8827b223-6e83-482f-a83c-98a6d30e8207
  fi
  linux16 ($root)/boot/memtest86+/memtest.bin
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb8/etc/fstab: ================================

--------------------------------------------------------------------------------
# 
# /etc/fstab: static file system information
#
# <file system>	<dir>	<type>	<options>	<dump>	<pass>
tmpfs		/tmp	tmpfs	nodev,nosuid	0	0
# DEVICE DETAILS: /dev/sdb2 UUID=f39be8fa-20a2-49fa-a9f4-0a3fec5aa26e LABEL=
# DEVICE DETAILS: /dev/sdb8 UUID=8827b223-6e83-482f-a83c-98a6d30e8207 LABEL=mansan
# DEVICE DETAILS: /dev/sdb9 UUID=dc198916-4136-46fa-802e-605a3c99502a LABEL=mansan1
/dev/sdb2 swap swap defaults 0 0
/dev/sdb8 / ext4 defaults 0 1
/dev/sdb9 /home ext4 defaults 0 1

/dev/sda2	/mnt/sda2	ext4	auto,users,exec,noatime	0 0
/dev/sda6	/mnt/sda6	ext4    auto,users,exec,noatime	0 0
/dev/sda7	/mnt/sda7	ext4    auto,users,exec,noatime	0 0
/dev/sda8	/mnt/sda8	ext4    auto,users,exec,noatime	0 0
/dev/sda9	/mnt/sda9	ext4    auto,users,exec,noatime	0 0
/dev/sda10	/mnt/sda10	ext4    auto,users,exec,noatime	0 0
/dev/sda11	/mnt/sda11	ext4	auto,users,exec,noatime	0 0
/dev/sdb3	/mnt/sdb3	ext4	auto,users,exec,noatime	0 0
/dev/sdb5	/mnt/sdb5	ext4	auto,users,exec,noatime	0 0
/dev/sdb6	/mnt/sdb6	ext4	auto,users,exec,noatime	0 0
/dev/sdb7	/mnt/sdb7	ext4	auto,users,exec,noatime	0 0
/dev/sdb10	/mnt/sdb10	ext4	auto,users,exec,noatime	0 0
/dev/sdb11	/mnt/sdb11	ext4	auto,users,exec,noatime	0 0



--------------------------------------------------------------------------------

======================= sdb8/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
#   * menu.c32 - provides a text menu
#   * vesamenu.c32 - provides a graphical menu
#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
#   * hdt.c32 - hardware detection tool
#   * reboot.c32 - reboots the system
#   * poweroff.com - shutdown the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples

DEFAULT arch
PROMPT 0        # Set to 1 if you always want to display the boot: prompt 
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl

# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux 
UI menu.c32
#UI vesamenu.c32

# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border       30;44   #40ffffff #a0000000 std
MENU COLOR title        1;36;44 #9033ccff #a0000000 std
MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel        37;44   #50ffffff #a0000000 std
MENU COLOR help         37;40   #c0ffffff #a0000000 std
MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07        37;40   #90ffffff #a0000000 std
MENU COLOR tabmsg       31;40   #30ffffff #00000000 std

# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

LABEL arch
	MENU LABEL Arch Linux
	LINUX ../vmlinuz-linux
	APPEND root=/dev/sda3 ro
	INITRD ../initramfs-linux.img

LABEL archfallback
	MENU LABEL Arch Linux Fallback
	LINUX ../vmlinuz-linux
	APPEND root=/dev/sda3 ro
	INITRD ../initramfs-linux-fallback.img

#LABEL windows
#        MENU LABEL Windows
#        COM32 chain.c32
#        APPEND hd0 1

LABEL hdt
        MENU LABEL HDT (Hardware Detection Tool)
        COM32 hdt.c32
 
LABEL reboot
        MENU LABEL Reboot
        COM32 reboot.c32
 
LABEL off
        MENU LABEL Power Off
        COMBOOT poweroff.com
--------------------------------------------------------------------------------

=================== sdb8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 114.053878784 = 122.464419840  boot/grub/grub.cfg                             1
 113.288085938 = 121.642156032  boot/initramfs-34-x86_64-fallback.img          2
 118.118030548 = 126.828269568  boot/initramfs-34-x86_64.img                   1
 118.163276672 = 126.876852224  boot/vmlinuz-34-x86_64                         1

================= sdb8: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

 117.470340729 = 126.132817920  boot/syslinux/syslinux.cfg                     1

=============================== StdErr Messages: ===============================

xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt

Offline

#18 2012-11-26 13:15:47

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: Installer reading HD's wrongly

You have legacy grub installed in the MBR of sda1.
And grub2 in the 'partition mbr' for a lot of distros.
In this situation I would update the menu.lst file on partition sda2 to try and chainload the grub 2 bootloader from the #! partition.

If that does not work, pick one distro to be your main distro.
Boot from live media to chroot into the distro you chose.
Install grub2 into the MBR of /dev/sda
If that works, you will have a problem booting into your mepis install, because that is still using legacy grub.

Online

#19 2012-11-26 21:27:29

addr
Member
From: Manitoba
Registered: 2010-01-14
Posts: 28

Re: Installer reading HD's wrongly

OK thanks.
My problem still is the system I have has been working flawlessly for 5 or 6 years until the new mobo went in and then almost nothing was being read properly except Windows. The installers from 4 out of the 6 distros I have since tried are reading the disks wrongly before anything is installed at all. Archlinux and the old Mepis were all of Linux that was functioning after the new hardware was installed.
I have to think that the mobo is involved.
However I will put grub2 into the MBR to try out what you say. (I have used it before and didn't like it at all but perhaps I wasn't using it properly.)
Thanks for all your time on this.

Offline

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo