SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

Pages: 1 2 3

#26 2012-05-24 13:09:17

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

Seems like the disconnect causes the rfkill lock to hang.
What do you normally do after a disconnect? Do you have to reboot to get the connection working again?

Could be you are experiencing this http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672891, which is still being worked on.

Could you post the output of 'dmesg' after you were disconnected. The ones you posted were from shortly after booting.

bootinfoscript - emacs primer - I ♥ #!

Offline

Be excellent to each other!

#27 2012-05-25 01:54:51

nuxero
#! Member
From: Somewhere
Registered: 2011-12-04
Posts: 60
Website

Re: My wireless disconnects constantly

After a disconnect what normally fix the trouble is a reboot, but not always I'm able to make a reboot :S.

So this is the dmesg output after a disconnect:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.2-686-pae (Debian 3.2.15-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Apr 23 09:33:57 UTC 2012
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f43f000 (usable)
[    0.000000]  BIOS-e820: 000000003f43f000 - 000000003f4bf000 (reserved)
[    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f5bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f5bf000 - 000000003f5ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable)
[    0.000000]  BIOS-e820: 000000003f600000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Mini 110-3500                /1584, BIOS F.14 11/30/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 2ea07000 - 2f770000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 3f5fe120 00074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 3f5fd000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 3f5f2000 07DD6 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 3f583000 00040
[    0.000000] ACPI: HPET 3f5fc000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 3f5fb000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 3f5fa000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 3f5f1000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 3f5f0000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 3f5ef000 00628 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f5ee000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f5ed000 0020F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 3f5ec000 00194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 124MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0003f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f43f
[    0.000000]     0: 0x0003f5ff -> 0x0003f600
[    0.000000] On node 0 totalpages: 259023
[    0.000000] free_area_init_node: node 0, pgdat c1424000, node_mem_map f720d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 249 pages used for memmap
[    0.000000]   HighMem zone: 31049 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7000000 s33088 r0 d24256 u524288
[    0.000000] pcpu-alloc: s33088 r0 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256994
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-686-pae root=UUID=bcfe8b15-4150-4943-ac46-c61d0809638a ro quiet splash splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f600)
[    0.000000] Memory: 1007852k/1038336k available (2925k kernel code, 28240k reserved, 1344k data, 436k init, 125192k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc142c000 - 0xc1499000   ( 436 kB)
[    0.000000]       .data : 0xc12db62d - 0xc142b8c0   (1344 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12db62d   (2925 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f6806000 soft=f6808000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.541 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.08 BogoMIPS (lpj=6650164)
[    0.004015] pid_max: default: 32768 minimum: 301
[    0.008047] Security Framework initialized
[    0.008057] AppArmor: AppArmor disabled by boot time parameter
[    0.008091] Mount-cache hash table entries: 512
[    0.008310] Initializing cgroup subsys cpuacct
[    0.008322] Initializing cgroup subsys memory
[    0.008339] Initializing cgroup subsys devices
[    0.008344] Initializing cgroup subsys freezer
[    0.008349] Initializing cgroup subsys net_cls
[    0.008354] Initializing cgroup subsys blkio
[    0.008366] Initializing cgroup subsys perf_event
[    0.008413] Disabled fast string operations
[    0.008421] CPU: Physical Processor ID: 0
[    0.008425] CPU: Processor Core ID: 0
[    0.008430] mce: CPU supports 5 MCE banks
[    0.008443] CPU0: Thermal monitoring enabled (TM2)
[    0.008449] using mwait in idle threads.
[    0.009713] ACPI: Core revision 20110623
[    0.020100] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063737] CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.064003] ... version:                3
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f68f2000 soft=f68f4000
[    0.064003] Booting Node   0, Processors  #1
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.152070] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152144] Brought up 2 CPUs
[    0.152152] Total of 2 processors activated (6649.98 BogoMIPS).
[    0.152707] devtmpfs: initialized
[    0.152707] PM: Registering ACPI NVS region at 3f4bf000 (1048576 bytes)
[    0.152707] print_constraints: dummy: 
[    0.152707] NET: Registered protocol family 16
[    0.152822] ACPI: bus type pci registered
[    0.152990] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.152999] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.153004] PCI: Using MMCONFIG for extended config space
[    0.153008] PCI: Using configuration type 1 for base access
[    0.154375] bio: create slab <bio-0> at 0
[    0.156110] ACPI: Added _OSI(Module Device)
[    0.156117] ACPI: Added _OSI(Processor Device)
[    0.156122] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156127] ACPI: Added _OSI(Processor Aggregator Device)
[    0.158859] ACPI: EC: Look up EC in DSDT
[    0.164281] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.165386] ACPI: SSDT 3f497790 00731 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.166482] ACPI: Dynamic OEM Table Load:
[    0.166489] ACPI: SSDT   (null) 00731 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.166819] ACPI: SSDT 3f495690 00646 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.167478] ACPI: Dynamic OEM Table Load:
[    0.167485] ACPI: SSDT   (null) 00646 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.188672] ACPI: SSDT 3f496d90 0015F (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.189419] ACPI: Dynamic OEM Table Load:
[    0.189426] ACPI: SSDT   (null) 0015F (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.200252] ACPI: SSDT 3f496f10 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.200941] ACPI: Dynamic OEM Table Load:
[    0.200949] ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.812171] ACPI: Interpreter enabled
[    0.812186] ACPI: (supports S0 S3 S4 S5)
[    0.812247] ACPI: Using IOAPIC for interrupt routing
[    0.837766] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.838057] ACPI: No dock devices found.
[    0.838063] HEST: Table not found.
[    0.838074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.838982] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.839000] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.839005] _OSC request data:1 8 1f 
[    0.839016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.840589] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.840597] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.840604] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.840613] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.840640] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[    0.840707] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[    0.840724] pci 0000:00:02.0: reg 10: [mem 0x56180000-0x561fffff]
[    0.840735] pci 0000:00:02.0: reg 14: [io  0x40c0-0x40c7]
[    0.840745] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[    0.840755] pci 0000:00:02.0: reg 1c: [mem 0x56000000-0x560fffff]
[    0.840807] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[    0.840821] pci 0000:00:02.1: reg 10: [mem 0x56100000-0x5617ffff]
[    0.840936] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.840965] pci 0000:00:1b.0: reg 10: [mem 0x56200000-0x56203fff 64bit]
[    0.841071] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.841080] pci 0000:00:1b.0: PME# disabled
[    0.841119] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.841223] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.841232] pci 0000:00:1c.0: PME# disabled
[    0.841275] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[    0.841386] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.841395] pci 0000:00:1c.2: PME# disabled
[    0.841436] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.841545] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.841553] pci 0000:00:1c.3: PME# disabled
[    0.841596] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.841657] pci 0000:00:1d.0: reg 20: [io  0x4080-0x409f]
[    0.841711] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.841770] pci 0000:00:1d.1: reg 20: [io  0x4060-0x407f]
[    0.841825] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.841883] pci 0000:00:1d.2: reg 20: [io  0x4040-0x405f]
[    0.841934] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.841994] pci 0000:00:1d.3: reg 20: [io  0x4020-0x403f]
[    0.842061] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.842091] pci 0000:00:1d.7: reg 10: [mem 0x56204400-0x562047ff]
[    0.842206] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.842215] pci 0000:00:1d.7: PME# disabled
[    0.842246] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.842352] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[    0.842530] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[    0.842558] pci 0000:00:1f.2: reg 10: [io  0x40b8-0x40bf]
[    0.842575] pci 0000:00:1f.2: reg 14: [io  0x40cc-0x40cf]
[    0.842590] pci 0000:00:1f.2: reg 18: [io  0x40b0-0x40b7]
[    0.842606] pci 0000:00:1f.2: reg 1c: [io  0x40c8-0x40cb]
[    0.842622] pci 0000:00:1f.2: reg 20: [io  0x40a0-0x40af]
[    0.842637] pci 0000:00:1f.2: reg 24: [mem 0x56204000-0x562043ff]
[    0.842697] pci 0000:00:1f.2: PME# supported from D3hot
[    0.842705] pci 0000:00:1f.2: PME# disabled
[    0.842735] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.842810] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.842969] pci 0000:01:00.0: [14e4:4727] type 0 class 0x000280
[    0.843017] pci 0000:01:00.0: reg 10: [mem 0x55000000-0x55003fff 64bit]
[    0.843251] pci 0000:01:00.0: supports D1 D2
[    0.848089] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.848099] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.848108] pci 0000:00:1c.0:   bridge window [mem 0x55000000-0x55ffffff]
[    0.848121] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.848187] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    0.848196] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.848204] pci 0000:00:1c.2:   bridge window [mem 0x54000000-0x54ffffff]
[    0.848216] pci 0000:00:1c.2:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.848356] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[    0.848425] pci 0000:03:00.0: reg 10: [io  0x1000-0x10ff]
[    0.848539] pci 0000:03:00.0: reg 18: [mem 0x52004000-0x52004fff 64bit pref]
[    0.848614] pci 0000:03:00.0: reg 20: [mem 0x52000000-0x52003fff 64bit pref]
[    0.848920] pci 0000:03:00.0: supports D1 D2
[    0.848926] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.848944] pci 0000:03:00.0: PME# disabled
[    0.849121] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    0.849130] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.849138] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff]
[    0.849151] pci 0000:00:1c.3:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.849240] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.849257] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.849264] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.849271] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.849278] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.849311] pci_bus 0000:00: on NUMA node 0
[    0.849319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.849608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.849791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.849915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.850036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.850300] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.850318] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.850322] _OSC request data:1 1f 1f 
[    0.850333]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.850466] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.850482] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.850486] _OSC request data:1 0 1d 
[    0.850497]  pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
[    0.850502] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.856376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.856522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.856665] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.856806] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.856948] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.857091] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.857236] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.857379] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.857735] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.857735] vgaarb: loaded
[    0.857735] vgaarb: bridge control possible 0000:00:02.0
[    0.857735] PCI: Using ACPI for IRQ routing
[    0.866663] PCI: pci_cache_line_size set to 64 bytes
[    0.866780] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.866787] reserve RAM buffer: 000000003f43f000 - 000000003fffffff 
[    0.866795] reserve RAM buffer: 000000003f600000 - 000000003fffffff 
[    0.867051] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.867063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.867074] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.872224] Switching to clocksource hpet
[    0.875468] pnp: PnP ACPI init
[    0.875512] ACPI: bus type pnp registered
[    0.881633] pnp 00:00: [bus 00-ff]
[    0.881641] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.881647] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.881653] pnp 00:00: [io  0x0d00-0xffff window]
[    0.881660] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.881666] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.881676] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.881682] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.881688] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.881694] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.881700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.881706] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.881713] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.881719] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.881725] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.881731] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.881737] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.881743] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.881750] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.881871] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.882163] pnp 00:01: [io  0x164e-0x164f]
[    0.882169] pnp 00:01: [io  0x0061]
[    0.882175] pnp 00:01: [io  0x0070]
[    0.882180] pnp 00:01: [io  0x0080]
[    0.882185] pnp 00:01: [io  0x0092]
[    0.882190] pnp 00:01: [io  0x00b2-0x00b3]
[    0.882196] pnp 00:01: [io  0x0063]
[    0.882201] pnp 00:01: [io  0x0065]
[    0.882206] pnp 00:01: [io  0x0067]
[    0.882211] pnp 00:01: [io  0x0600-0x060f]
[    0.882216] pnp 00:01: [io  0x0610]
[    0.882222] pnp 00:01: [io  0x0800-0x080f]
[    0.882227] pnp 00:01: [io  0x0810-0x0817]
[    0.882233] pnp 00:01: [io  0x0400-0x047f]
[    0.882238] pnp 00:01: [io  0x0500-0x053f]
[    0.882244] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.882250] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.882256] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.882262] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.882268] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.882273] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.882279] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.882316] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.882437] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.882445] system 00:01: [io  0x0610] has been reserved
[    0.882452] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.882459] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.882466] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.882473] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.882482] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.882490] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.882497] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.882505] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.882512] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.882520] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.882528] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.882536] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.882563] pnp 00:02: [io  0x0000-0x001f]
[    0.882569] pnp 00:02: [io  0x0081-0x0091]
[    0.882574] pnp 00:02: [io  0x0093-0x009f]
[    0.882580] pnp 00:02: [io  0x00c0-0x00df]
[    0.882586] pnp 00:02: [dma 4]
[    0.882660] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.882720] pnp 00:03: [io  0x0070-0x0077]
[    0.882795] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.882822] pnp 00:04: [irq 0 disabled]
[    0.882840] pnp 00:04: [irq 8]
[    0.882846] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.882921] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.882951] pnp 00:05: [io  0x00f0]
[    0.882966] pnp 00:05: [irq 13]
[    0.883040] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.883069] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.883141] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.883195] pnp 00:07: [io  0x0060]
[    0.883201] pnp 00:07: [io  0x0064]
[    0.883213] pnp 00:07: [irq 1]
[    0.883291] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.883338] pnp 00:08: [irq 12]
[    0.883415] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3c PNP0f13 (active)
[    0.883531] pnp: PnP ACPI: found 9 devices
[    0.883535] ACPI: ACPI bus type pnp unregistered
[    0.883542] PnPBIOS: Disabled by ACPI PNP
[    0.924857] PCI: max bus depth: 1 pci_try_num: 2
[    0.924917] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.924926] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.924937] pci 0000:00:1c.0:   bridge window [mem 0x55000000-0x55ffffff]
[    0.924946] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.924958] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    0.924966] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.924976] pci 0000:00:1c.2:   bridge window [mem 0x54000000-0x54ffffff]
[    0.924985] pci 0000:00:1c.2:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.924998] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    0.925005] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.925015] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff]
[    0.925024] pci 0000:00:1c.3:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.925036] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.925083] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.925094] pci 0000:00:1c.0: setting latency timer to 64
[    0.925116] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.925126] pci 0000:00:1c.2: setting latency timer to 64
[    0.925146] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.925155] pci 0000:00:1c.3: setting latency timer to 64
[    0.925168] pci 0000:00:1e.0: setting latency timer to 64
[    0.925176] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.925183] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.925189] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.925196] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.925203] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.925209] pci_bus 0000:01: resource 1 [mem 0x55000000-0x55ffffff]
[    0.925216] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.925223] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.925229] pci_bus 0000:02: resource 1 [mem 0x54000000-0x54ffffff]
[    0.925236] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.925242] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.925249] pci_bus 0000:03: resource 1 [mem 0x53000000-0x53ffffff]
[    0.925255] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.925262] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.925269] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.925275] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.925281] pci_bus 0000:04: resource 7 [mem 0x40000000-0xfebfffff]
[    0.925418] NET: Registered protocol family 2
[    0.925570] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.926193] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.927120] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.927549] TCP: Hash tables configured (established 131072 bind 65536)
[    0.927555] TCP reno registered
[    0.927565] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.927583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.927840] NET: Registered protocol family 1
[    0.927882] pci 0000:00:02.0: Boot video device
[    0.927925] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.927951] pci 0000:00:1d.0: PCI INT A disabled
[    0.927984] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.928051] pci 0000:00:1d.1: PCI INT B disabled
[    0.928070] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.928093] pci 0000:00:1d.2: PCI INT C disabled
[    0.928108] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.928133] pci 0000:00:1d.3: PCI INT D disabled
[    0.928150] pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.528030] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.528153] pci 0000:00:1d.7: PCI INT A disabled
[    2.528190] PCI: CLS 64 bytes, default 64
[    2.528312] Unpacking initramfs...
[    3.242480] Freeing initrd memory: 13732k freed
[    3.253302] Simple Boot Flag at 0x44 set to 0x1
[    3.254234] audit: initializing netlink socket (disabled)
[    3.254256] type=2000 audit(1337908070.248:1): initialized
[    3.282986] highmem bounce pool size: 64 pages
[    3.282997] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.287914] VFS: Disk quotas dquot_6.5.2
[    3.287987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.288212] msgmni has been set to 1750
[    3.288622] alg: No test for stdrng (krng)
[    3.288700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.288707] io scheduler noop registered
[    3.288711] io scheduler deadline registered
[    3.288746] io scheduler cfq registered (default)
[    3.288920] pcieport 0000:00:1c.0: setting latency timer to 64
[    3.289000] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    3.289134] pcieport 0000:00:1c.2: setting latency timer to 64
[    3.289206] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    3.289329] pcieport 0000:00:1c.3: setting latency timer to 64
[    3.289400] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    3.289593] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.289661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.289667] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    3.290205] intel_idle: MWAIT substates: 0x20220
[    3.290222] intel_idle: v0.4 model 0x1C
[    3.290227] intel_idle: lapic_timer_reliable_states 0x2
[    3.290232] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    3.290317] ERST: Table is not found!
[    3.290321] GHES: HEST is not enabled!
[    3.290353] isapnp: Scanning for PnP cards...
[    3.644290] isapnp: No Plug & Play device found
[    3.644456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.648774] Linux agpgart interface v0.103
[    3.649001] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    3.649206] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.649463] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    3.649709] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    3.650052] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.659160] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.659176] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.659521] mousedev: PS/2 mouse device common for all mice
[    3.659628] rtc_cmos 00:03: RTC can wake from S4
[    3.659823] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.659863] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.660122] cpuidle: using governor ladder
[    3.660418] cpuidle: using governor menu
[    3.660981] TCP cubic registered
[    3.661098] NET: Registered protocol family 10
[    3.662386] Mobile IPv6
[    3.662393] NET: Registered protocol family 17
[    3.662403] Registering the dns_resolver key type
[    3.662446] Using IPI No-Shortcut mode
[    3.662763] PM: Hibernation image not present or could not be loaded.
[    3.662785] registered taskstats version 1
[    3.665654] rtc_cmos 00:03: setting system clock to 2012-05-25 01:07:51 UTC (1337908071)
[    3.665798] Initializing network drop monitor service
[    3.666032] Freeing unused kernel memory: 436k freed
[    3.666409] Write protecting the kernel text: 2928k
[    3.666472] Write protecting the kernel read-only data: 1088k
[    3.666478] NX-protecting the kernel data: 3216k
[    3.668264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.699764] udev[49]: starting version 164
[    3.828647] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.828698] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.828753] r8169 0000:03:00.0: setting latency timer to 64
[    3.828848] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    3.830396] r8169 0000:03:00.0: eth0: RTL8105e at 0xf8222000, 98:4b:e1:f0:b6:45, XID 00a00000 IRQ 43
[    3.833418] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    3.833436] ACPI: Power Button [PWRB]
[    3.833659] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    3.864421] ACPI: Lid Switch [LID]
[    3.864693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.864713] ACPI: Power Button [PWRF]
[    3.864842] usbcore: registered new interface driver usbfs
[    3.864912] usbcore: registered new interface driver hub
[    3.884261] usbcore: registered new device driver usb
[    3.885654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.885721] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.885771] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.885782] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.885846] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.885902] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    3.885926] ehci_hcd 0000:00:1d.7: debug port 1
[    3.889832] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    3.898882] SCSI subsystem initialized
[    3.922318] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56204400
[    3.931783] [drm] Initialized drm 1.1.0 20060810
[    3.936549] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.936652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.936662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.936671] usb usb1: Product: EHCI Host Controller
[    3.936679] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae ehci_hcd
[    3.936686] usb usb1: SerialNumber: 0000:00:1d.7
[    3.937080] hub 1-0:1.0: USB hub found
[    3.937102] hub 1-0:1.0: 8 ports detected
[    3.946724] uhci_hcd: USB Universal Host Controller Interface driver
[    3.946822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.946849] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.946859] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.946894] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.946945] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004080
[    3.947056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.947065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.947073] usb usb2: Product: UHCI Host Controller
[    3.947081] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae uhci_hcd
[    3.947088] usb usb2: SerialNumber: 0000:00:1d.0
[    3.947286] libata version 3.00 loaded.
[    3.948255] hub 2-0:1.0: USB hub found
[    3.948271] hub 2-0:1.0: 2 ports detected
[    3.948490] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.948516] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.948526] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.948552] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.948631] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004060
[    3.948758] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.948768] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.948776] usb usb3: Product: UHCI Host Controller
[    3.948783] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae uhci_hcd
[    3.948790] usb usb3: SerialNumber: 0000:00:1d.1
[    3.950927] hub 3-0:1.0: USB hub found
[    3.950948] hub 3-0:1.0: 2 ports detected
[    3.951196] ahci 0000:00:1f.2: version 3.0
[    3.951223] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.951335] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    3.951517] ahci: SSS flag set, parallel bus scan disabled
[    3.951571] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    3.951583] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    3.951597] ahci 0000:00:1f.2: setting latency timer to 64
[    3.967424] scsi0 : ahci
[    3.974847] scsi1 : ahci
[    3.976574] scsi2 : ahci
[    3.977030] scsi3 : ahci
[    3.977264] ata1: SATA max UDMA/133 abar m1024@0x56204000 port 0x56204100 irq 44
[    3.977273] ata2: DUMMY
[    3.977279] ata3: DUMMY
[    3.977284] ata4: DUMMY
[    3.977355] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.977383] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.977393] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.977428] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.977512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    3.977626] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.977636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.977645] usb usb4: Product: UHCI Host Controller
[    3.977653] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae uhci_hcd
[    3.977660] usb usb4: SerialNumber: 0000:00:1d.2
[    3.978051] hub 4-0:1.0: USB hub found
[    3.978070] hub 4-0:1.0: 2 ports detected
[    3.978303] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.978332] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    3.978343] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.978375] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.978457] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004020
[    3.978568] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.978579] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.978587] usb usb5: Product: UHCI Host Controller
[    3.978595] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.2-686-pae uhci_hcd
[    3.978602] usb usb5: SerialNumber: 0000:00:1d.3
[    3.979003] hub 5-0:1.0: USB hub found
[    3.979020] hub 5-0:1.0: 2 ports detected
[    3.979279] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.979297] i915 0000:00:02.0: setting latency timer to 64
[    4.034779] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    4.034796] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.034803] [drm] Driver supports precise vblank timestamp query.
[    4.034905] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.248095] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[    4.364160] [drm] initialized overlay support
[    4.385046] fbcon: inteldrmfb (fb0) is primary device
[    4.432056] usb 1-6: New USB device found, idVendor=5986, idProduct=0314
[    4.432068] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    4.432077] usb 1-6: Product: HP Webcam
[    4.432084] usb 1-6: Manufacturer: GenesysLogic Technology Co., Ltd.
[    4.472096] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.473023] ata1.00: ATA-8: ST9250410AS, 0006HPM1, max UDMA/100
[    4.473038] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.474669] ata1.00: configured for UDMA/100
[    4.474993] scsi 0:0:0:0: Direct-Access     ATA      ST9250410AS      0006 PQ: 0 ANSI: 5
[    4.489113] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    4.489335] sd 0:0:0:0: [sda] Write Protect is off
[    4.489344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.489437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.558172]  sda: sda1 sda2 < sda5 sda6 >
[    4.559430] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.700105] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[    4.818982] Console: switching to colour frame buffer device 128x37
[    4.825805] fb0: inteldrmfb frame buffer device
[    4.825810] drm: registered panic notifier
[    4.835044] usb 1-8: New USB device found, idVendor=03f0, idProduct=301d
[    4.835053] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.835059] usb 1-8: Product: lc2000
[    4.835064] usb 1-8: Manufacturer: ðlc2000
[    4.835068] usb 1-8: SerialNumber: 3519120400366430
[    4.843576] acpi device:15: registered as cooling_device0
[    4.847928] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    4.847953] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    4.848118] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.084103] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    5.258574] usb 5-1: New USB device found, idVendor=0a5c, idProduct=21b4
[    5.258587] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.258598] usb 5-1: Product: Broadcom 2070 Bluetooth
[    5.258606] usb 5-1: Manufacturer: Broadcom Corp
[    5.258619] usb 5-1: SerialNumber: CC52AF190392
[    5.425396] thermal LNXTHERM:00: registered as thermal_zone0
[    5.425404] ACPI: Thermal Zone [CPUZ] (34 C)
[    5.428877] thermal LNXTHERM:01: registered as thermal_zone1
[    5.428884] ACPI: Thermal Zone [BATZ] (29 C)
[    5.949997] PM: Starting manual resume from disk
[    5.950006] PM: Hibernation image partition 8:5 present
[    5.950011] PM: Looking for hibernation image.
[    5.950505] PM: Image not found (code -22)
[    5.950509] PM: Hibernation image not present or could not be loaded.
[    6.046887] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.867722] udev[300]: starting version 164
[    8.416827] wmi: Mapper loaded
[    8.452107] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    8.556753] input: HP WMI hotkeys as /devices/virtual/input/input6
[    8.564052] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.667157] ACPI: AC Adapter [AC] (off-line)
[    8.791046] hp_wmi: Unknown event_id - 0 - 0x0
[    8.938108] cfg80211: Calling CRDA to update world regulatory domain
[    9.094033] Linux media interface: v0.10
[    9.195548] cdc_acm 1-8:1.1: ttyACM0: USB ACM device
[    9.203724] cdc_acm 1-8:1.3: ttyACM1: USB ACM device
[    9.218825] cdc_acm 1-8:1.9: ttyACM2: USB ACM device
[    9.234599] Bluetooth: Core ver 2.16
[    9.234904] usbcore: registered new interface driver cdc_acm
[    9.234912] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.235111] cdc_wdm 1-8:1.5: cdc-wdm-176: USB WDM device
[    9.236088] cdc_wdm 1-8:1.8: cdc-wdm-175: USB WDM device
[    9.236156] usbcore: registered new interface driver cdc_wdm
[    9.239786] NET: Registered protocol family 31
[    9.239795] Bluetooth: HCI device and connection manager initialized
[    9.239804] Bluetooth: HCI socket layer initialized
[    9.239810] Bluetooth: L2CAP socket layer initialized
[    9.240424] Bluetooth: SCO socket layer initialized
[    9.266783] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    9.267279] usbcore: registered new interface driver btusb
[    9.337825] ACPI: Battery Slot [BAT0] (battery present)
[    9.491964] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.492115] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    9.492182] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    9.493829] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400
[    9.549056] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    9.629508] cdc_ether 1-8:1.6: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-8, Mobile Broadband Network Device, 02:80:37:ec:02:00
[    9.629580] usbcore: registered new interface driver cdc_ether
[    9.659569] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    9.676444] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.676753] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.709502] Linux video capture interface: v2.00
[    9.726316] uvcvideo: Found UVC 1.00 device HP Webcam (5986:0314)
[    9.771979] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11
[    9.772314] usbcore: registered new interface driver uvcvideo
[    9.772322] USB Video Class driver (1.1.1)
[    9.862471] brcmsmac 0000:01:00.0: bus 1 slot 0 func 0 irq 11
[    9.862504] brcmsmac 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.862523] brcmsmac 0000:01:00.0: setting latency timer to 64
[   10.175875] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.850271] Adding 975868k swap on /dev/sda5.  Priority:-1 extents:1 across:975868k 
[   10.858153] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.189416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.284099] loop: module loaded
[   12.006846] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.927630] fuse init (API version 7.17)
[   15.563331] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[   15.563343] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   15.563962] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   15.564652] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.791028] r8169 0000:03:00.0: eth0: link down
[   15.791517] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.222676] vboxdrv: Found 2 processor cores.
[   17.223919] vboxdrv: fAsync=0 offMin=0x2ee offMax=0x32be
[   17.225193] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.225203] vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
[   17.877032] vboxpci: IOMMU not found (not registered)
[   35.944450] wlan0: authenticate with 00:24:17:8c:df:83 (try 1)
[   35.946634] wlan0: authenticated
[   35.946732] wlan0: associate with 00:24:17:8c:df:83 (try 1)
[   35.950629] wlan0: RX AssocResp from 00:24:17:8c:df:83 (capab=0x411 status=0 aid=3)
[   35.950640] wlan0: associated
[   35.951831] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   35.951847] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   35.951860] ieee80211 phy0: changing basic rates failed: -22
[   35.951870] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   35.952456] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.233304] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[   46.080056] wlan0: no IPv6 routers present
[ 2389.589150] ieee80211 phy0: wl0: brcms_c_watchdog: dead chip
[ 2390.135120] ieee80211 phy0: ops->tx called while down
[ 2390.137558] ieee80211 phy0: ops->tx called while down
[ 2390.992174] ieee80211 phy0: ops->tx called while down
[ 2391.492177] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
[ 2391.492197] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
[ 2391.492209] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
[ 2391.492220] ieee80211 phy0: wl0: brcms_c_wme_setparams : no-clock
[ 2391.492231] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2391.492247] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 2391.492261] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 2391.496909] ieee80211 phy0: ops->tx called while down
[ 2391.496976] cfg80211: Calling CRDA for country: US
[ 2391.652123] ieee80211 phy0: ops->tx called while down
[ 2391.708156] ieee80211 phy0: ops->tx called while down
[ 2391.764186] ieee80211 phy0: ops->tx called while down
[ 2391.820167] ieee80211 phy0: ops->tx called while down
[ 2391.876179] ieee80211 phy0: ops->tx called while down
[ 2391.932154] ieee80211 phy0: ops->tx called while down
[ 2391.988177] ieee80211 phy0: ops->tx called while down
[ 2392.044149] ieee80211 phy0: ops->tx called while down
[ 2392.100176] ieee80211 phy0: ops->tx called while down
[ 2392.156171] ieee80211 phy0: ops->tx called while down
[ 2392.212146] ieee80211 phy0: ops->tx called while down
[ 2392.489321] wlan0: authenticate with 00:24:17:8c:df:83 (try 1)
[ 2392.489354] ieee80211 phy0: ops->tx called while down
[ 2392.688175] wlan0: authenticate with 00:24:17:8c:df:83 (try 2)
[ 2392.688213] ieee80211 phy0: ops->tx called while down
[ 2392.888151] wlan0: authenticate with 00:24:17:8c:df:83 (try 3)
[ 2392.888185] ieee80211 phy0: ops->tx called while down
[ 2393.088157] wlan0: authentication with 00:24:17:8c:df:83 timed out
[ 2402.548158] ieee80211 phy0: ops->tx called while down
[ 2402.604145] ieee80211 phy0: ops->tx called while down
[ 2402.660178] ieee80211 phy0: ops->tx called while down
[ 2402.716170] ieee80211 phy0: ops->tx called while down
[ 2402.772169] ieee80211 phy0: ops->tx called while down
[ 2402.828173] ieee80211 phy0: ops->tx called while down
[ 2402.884174] ieee80211 phy0: ops->tx called while down
[ 2402.940160] ieee80211 phy0: ops->tx called while down
[ 2402.996113] ieee80211 phy0: ops->tx called while down
[ 2403.052076] ieee80211 phy0: ops->tx called while down
[ 2403.108160] ieee80211 phy0: ops->tx called while down
[ 2408.440170] ieee80211 phy0: ops->tx called while down
[ 2408.496153] ieee80211 phy0: ops->tx called while down
[ 2408.552114] ieee80211 phy0: ops->tx called while down
[ 2408.608131] ieee80211 phy0: ops->tx called while down
[ 2408.664179] ieee80211 phy0: ops->tx called while down
[ 2408.720156] ieee80211 phy0: ops->tx called while down
[ 2408.776132] ieee80211 phy0: ops->tx called while down
[ 2408.832171] ieee80211 phy0: ops->tx called while down
[ 2408.888091] ieee80211 phy0: ops->tx called while down
[ 2408.944192] ieee80211 phy0: ops->tx called while down
[ 2409.000167] ieee80211 phy0: ops->tx called while down
[ 2414.336121] ieee80211 phy0: ops->tx called while down
[ 2414.392169] ieee80211 phy0: ops->tx called while down
[ 2414.448204] ieee80211 phy0: ops->tx called while down
[ 2414.504160] ieee80211 phy0: ops->tx called while down
[ 2414.560108] ieee80211 phy0: ops->tx called while down
[ 2414.616099] ieee80211 phy0: ops->tx called while down
[ 2414.672168] ieee80211 phy0: ops->tx called while down
[ 2414.728159] ieee80211 phy0: ops->tx called while down
[ 2414.784100] ieee80211 phy0: ops->tx called while down
[ 2414.840106] ieee80211 phy0: ops->tx called while down
[ 2414.896121] ieee80211 phy0: ops->tx called while down
[ 2420.228170] ieee80211 phy0: ops->tx called while down
[ 2420.284125] ieee80211 phy0: ops->tx called while down
[ 2420.340172] ieee80211 phy0: ops->tx called while down
[ 2420.396163] ieee80211 phy0: ops->tx called while down
[ 2420.452163] ieee80211 phy0: ops->tx called while down
[ 2420.508179] ieee80211 phy0: ops->tx called while down
[ 2420.564169] ieee80211 phy0: ops->tx called while down
[ 2420.620114] ieee80211 phy0: ops->tx called while down
[ 2420.676125] ieee80211 phy0: ops->tx called while down
[ 2420.732157] ieee80211 phy0: ops->tx called while down
[ 2420.788177] ieee80211 phy0: ops->tx called while down
[ 2426.124173] ieee80211 phy0: ops->tx called while down
[ 2426.180176] ieee80211 phy0: ops->tx called while down
[ 2426.236177] ieee80211 phy0: ops->tx called while down
[ 2426.292177] ieee80211 phy0: ops->tx called while down
[ 2426.348174] ieee80211 phy0: ops->tx called while down
[ 2426.404147] ieee80211 phy0: ops->tx called while down
[ 2426.460094] ieee80211 phy0: ops->tx called while down
[ 2426.516187] ieee80211 phy0: ops->tx called while down
[ 2426.572184] ieee80211 phy0: ops->tx called while down
[ 2426.628086] ieee80211 phy0: ops->tx called while down
[ 2426.684078] ieee80211 phy0: ops->tx called while down
[ 2432.020117] ieee80211 phy0: ops->tx called while down
[ 2432.076136] ieee80211 phy0: ops->tx called while down
[ 2432.132109] ieee80211 phy0: ops->tx called while down
[ 2432.188084] ieee80211 phy0: ops->tx called while down
[ 2432.244163] ieee80211 phy0: ops->tx called while down
[ 2432.300180] ieee80211 phy0: ops->tx called while down
[ 2432.356193] ieee80211 phy0: ops->tx called while down
[ 2432.412132] ieee80211 phy0: ops->tx called while down
[ 2432.468197] ieee80211 phy0: ops->tx called while down
[ 2432.524152] ieee80211 phy0: ops->tx called while down
[ 2432.580126] ieee80211 phy0: ops->tx called while down

Offline

#28 2012-05-25 09:16:00

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

[ 2389.589150] ieee80211 phy0: wl0: brcms_c_watchdog: dead chip

Sounds ominous.
That is not the problem described in the bug I mentioned, and I cannot find anything related.
May be worth filing a bug report.

bootinfoscript - emacs primer - I ♥ #!

Offline

#29 2012-05-25 09:17:36

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

[ 2389.589150] ieee80211 phy0: wl0: brcms_c_watchdog: dead chip

Sounds ominous.
That is not the problem described in the bug I mentioned, and I cannot find anything related.
Chip malfunctioning under certain circumstances? Temperature?
May be worth filing a bug report, because the situation is not handled gracefully.

bootinfoscript - emacs primer - I ♥ #!

Offline

#30 2012-06-02 01:21:02

fventura03
New Member
Registered: 2012-05-24
Posts: 5

Re: My wireless disconnects constantly

i am also getting disconnects on two laptops with crunchbang. i normally have to do a reboot to get it going, or else it just keeps asking me for the wireless lan password.

ill try some of the stuff in this thread though.

Offline

#31 2012-06-02 02:10:22

arclance
#! Die Hard
Registered: 2012-03-29
Posts: 820

Re: My wireless disconnects constantly

I had some trouble with disconnects today and I tried setting QoS in my router to give the troublesome computers connection priority (I'm sure no one will notice...).
It seems to have helped some, the occasional quick disconnect-reconnects have stopped timing out my irc connection.
Maybe the kernel module or nm-applet are too sensitive to disconnects?
My desktops were taking turns disconnecting and reconnecting in 2s cycles before.

Building Conky | iCalendar Conky | Weather Script | Background List
Fluxbox | SpaceFM

Offline

#32 2012-06-02 04:59:18

pvsage
Internal Affairs
From: North Carolina
Registered: 2009-10-18
Posts: 9,027

Re: My wireless disconnects constantly

@fventura03:  What wifi cards do you have on the laptops?  The QoS fix mentioned by arclance helped with my BCM4312, but it's very chip-specific (applies only to lp-phy chips), and is only an issue with certain routers.

while ( ! ( succeed = try() ) );
We've earned a reputation as a nice, friendly community; please help us keep it that way.

Offline

#33 2012-06-02 15:28:23

arclance
#! Die Hard
Registered: 2012-03-29
Posts: 820

Re: My wireless disconnects constantly

For reference this is the wireless card I am using.
It has a AR5416+AR2133 chipset.

Building Conky | iCalendar Conky | Weather Script | Background List
Fluxbox | SpaceFM

Offline

#34 2012-06-02 16:11:32

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

^ Post output of

uname -r
lspci -knn  (only the wireless sections)

It does work, but you are frequently disconnected?

bootinfoscript - emacs primer - I ♥ #!

Offline

#35 2012-06-02 16:27:03

arclance
#! Die Hard
Registered: 2012-03-29
Posts: 820

Re: My wireless disconnects constantly

^ Me?
It's fine now it's was being weird yesterday the mass disconnects have stopped.
I think my router causes more problems than my wireless card, I'm kind of at the limit of it's range which doesn't help either.
I still get the occasional half second disconnect maybe once a day but it's fast enough that it does not disrupt anything using the internet.

uname -r
3.3.0-7.dmz.2-liquorix-amd64
lspci -knn
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
    Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
    Kernel driver in use: r8169
09:01.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)
    Subsystem: Atheros Communications Inc. Device [168c:3071]
    Kernel driver in use: ath9k

The ethernet is rock solid but I am not allowed to run cables to the router here.

Building Conky | iCalendar Conky | Weather Script | Background List
Fluxbox | SpaceFM

Offline

#36 2012-06-02 16:54:12

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

I thought you were looking for help big_smile
Seems like you are OK and up-to-date.

bootinfoscript - emacs primer - I ♥ #!

Offline

#37 2012-06-02 17:15:38

arclance
#! Die Hard
Registered: 2012-03-29
Posts: 820

Re: My wireless disconnects constantly

^ Yes it's good now.
Setting QoS in my router to prioritize my computers with connection issues helped alot.
It makes the router try harder to maintain a constant connection to those computers.
Since it helped so much I don't think my problem was due to my wireless card but my router (which is not very good (WRT160N)) and how far I am from it.

Building Conky | iCalendar Conky | Weather Script | Background List
Fluxbox | SpaceFM

Offline

#38 2012-06-07 03:04:01

nuxero
#! Member
From: Somewhere
Registered: 2011-12-04
Posts: 60
Website

Re: My wireless disconnects constantly

I'm trying to make a bug report. I've got stucked in the first question: "Please enter the name of the package in which you have found a problem, or type 'other' to report a more general problem" I don't know what to answer ¬¬

Offline

#39 2012-06-07 06:25:46

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

[ 2389.589150] ieee80211 phy0: wl0: brcms_c_watchdog: dead chip

ieee80211 comes with the kernel. So make it a bug report against the kernel you are running:

uname -r

will give you the package name.

bootinfoscript - emacs primer - I ♥ #!

Offline

#40 2012-07-15 19:19:38

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

fventura03 wrote:

i am also getting disconnects on two laptops with crunchbang. i normally have to do a reboot to get it going, or else it just keeps asking me for the wireless lan password.

ill try some of the stuff in this thread though.

I had the same problem, couldn't fix it. I dual boot, and the problem even made my windows 7 loose internet connectivity (I had to actually remove the power cord and battery, wait a while put it back and turn on the system to get the wireless working - dell studio 1555...).

I installed crunchbang BPO and the problem went away (the password problem). But now it disconnects randomly so I'm looking for a solution. I get the internet back just by turning wifi on and off, but I want to find a permanent solution...

Last edited by hq (2012-07-15 19:20:52)

Dell Studio 1555

Offline

#41 2012-07-15 19:33:01

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

^ Please post output of

uname -r
dmesg
lsmod

bootinfoscript - emacs primer - I ♥ #!

Offline

#42 2012-07-15 19:33:58

arclance
#! Die Hard
Registered: 2012-03-29
Posts: 820

Re: My wireless disconnects constantly

@hq

I found that the network-manager-gnome from unstable was able to recover from the disconnect-reconnect loop I was having problems with.

The loop still happens sometimes but the unstable version does not give up trying to reconnect unlike the version in stable/backports.

With the unstable version once whatever was causing my connection to do that ends network connectivity returns to normal.

I used to have to kill and restart nm-applet or reboot to get the network to work correctly again.

I would use wicd but the last time I checked it could not control two network connections at once and I need to do that at home.

Last edited by arclance (2012-07-15 19:42:20)

Building Conky | iCalendar Conky | Weather Script | Background List
Fluxbox | SpaceFM

Offline

#43 2012-07-19 11:04:59

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

3.2.0-0.bpo.2-amd64

------------------------------------------

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.20-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jun 29 20:42:29 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=3de420a6-e246-475a-9a45-3b91eb4a22ae ro quiet splash

Last edited by hq (2012-07-19 11:05:59)

Dell Studio 1555

Offline

#44 2012-07-19 11:07:22

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable)
[    0.000000]  BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdaa7000 - 00000000bdbba000 (usable)
[    0.000000]  BIOS-e820: 00000000bdbba000 - 00000000bdc0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable)
[    0.000000]  BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf0f000 - 00000000bdf19000 (usable)
[    0.000000]  BIOS-e820: 00000000bdf19000 - 00000000bdf1f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf1f000 - 00000000bdf63000 (usable)
[    0.000000]  BIOS-e820: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdf9f000 - 00000000bdfe3000 (usable)
[    0.000000]  BIOS-e820: 00000000bdfe3000 - 00000000bdfff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Dell Inc. Studio 1555/0J276M, BIOS A12 08/11/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f7900] f7900
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000be000000
[    0.000000]  0000000000 - 00be000000 page 2M
[    0.000000] kernel direct mapping tables up to be000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ bdfdd000-bdfe3000
[    0.000000] RAMDISK: 36c00000 - 375f8000
[    0.000000] ACPI: RSDP 00000000000f7850 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bdff786c 00074 (v01 DELL    QA09    06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bdfe7000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000bdfe8000 072A6 (v02 Intel  CANTIGA  06040000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000bdf9efc0 00040
[    0.000000] ACPI: HPET 00000000bdffed16 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000bdffed4e 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 00000000bdffed8a 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bdffedf2 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bdffee1a 00176 (v01 DELL    QA09    06040000  LTP 00000000)
[    0.000000] ACPI: OSFR 00000000bdffef90 00070 (v01 DELL   DELL     06040000 ASL  00000061)
[    0.000000] ACPI: SSDT 00000000bdfe6000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bdfe5000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bdfe4000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000bdaa1
[    0.000000]     0: 0x000bdaa7 -> 0x000bdbba
[    0.000000]     0: 0x000bdc0f -> 0x000bdd08
[    0.000000]     0: 0x000bdf0f -> 0x000bdf19
[    0.000000]     0: 0x000bdf1f -> 0x000bdf63
[    0.000000]     0: 0x000bdf9f -> 0x000bdfe3
[    0.000000]     0: 0x000bdfff -> 0x000be000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1039564
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3919 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 759160 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bdaa1000 - 00000000bdaa7000
[    0.000000] PM: Registered nosave memory: 00000000bdbba000 - 00000000bdc0f000
[    0.000000] PM: Registered nosave memory: 00000000bdd08000 - 00000000bdf0f000
[    0.000000] PM: Registered nosave memory: 00000000bdf19000 - 00000000bdf1f000
[    0.000000] PM: Registered nosave memory: 00000000bdf63000 - 00000000bdf9f000
[    0.000000] PM: Registered nosave memory: 00000000bdfe3000 - 00000000bdfff000
[    0.000000] PM: Registered nosave memory: 00000000be000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at be000000 (gap: be000000:42000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u1048576
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021639
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=3de420a6-e246-475a-9a45-3b91eb4a22ae ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4015856k/5242880k available (3517k kernel code, 1084624k absent, 142400k reserved, 3216k data, 612k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1994.862 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.72 BogoMIPS (lpj=7979448)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004056] Security Framework initialized
[    0.004063] AppArmor: AppArmor disabled by boot time parameter
[    0.004431] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006743] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008141] Mount-cache hash table entries: 256
[    0.008297] Initializing cgroup subsys cpuacct
[    0.008302] Initializing cgroup subsys memory
[    0.008316] Initializing cgroup subsys devices
[    0.008320] Initializing cgroup subsys freezer
[    0.008322] Initializing cgroup subsys net_cls
[    0.008324] Initializing cgroup subsys blkio
[    0.008333] Initializing cgroup subsys perf_event
[    0.008370] CPU: Physical Processor ID: 0
[    0.008372] CPU: Processor Core ID: 0
[    0.008374] mce: CPU supports 6 MCE banks
[    0.008383] CPU0: Thermal monitoring enabled (TM2)
[    0.008387] using mwait in idle threads.
[    0.009642] ACPI: Core revision 20110623
[    0.016775] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059564] CPU0: Intel Pentium(R) Dual-Core CPU       T4200  @ 2.00GHz stepping 0a
[    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 97000
[    0.148047] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148086] Brought up 2 CPUs
[    0.148089] Total of 2 processors activated (7979.68 BogoMIPS).
[    0.149069] devtmpfs: initialized
[    0.152512] PM: Registering ACPI NVS region at bdf63000 (245760 bytes)
[    0.152512] print_constraints: dummy: 
[    0.152512] NET: Registered protocol family 16
[    0.152512] ACPI: bus type pci registered
[    0.152512] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.152512] PCI: not using MMCONFIG
[    0.152512] PCI: Using configuration type 1 for base access
[    0.152512] dmi type 0xB1 record - unknown flag
[    0.156140] bio: create slab <bio-0> at 0
[    0.156140] ACPI: Added _OSI(Module Device)
[    0.156140] ACPI: Added _OSI(Processor Device)
[    0.156140] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156140] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157510] ACPI: EC: Look up EC in DSDT
[    0.172051] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.177553] ACPI: SSDT 00000000bdf1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.177894] ACPI: Dynamic OEM Table Load:
[    0.177898] ACPI: SSDT           (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.178072] ACPI: SSDT 00000000bdf19620 00575 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.178391] ACPI: Dynamic OEM Table Load:
[    0.178393] ACPI: SSDT           (null) 00575 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.200347] ACPI: SSDT 00000000bdf1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.200709] ACPI: Dynamic OEM Table Load:
[    0.200712] ACPI: SSDT           (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.212143] ACPI: SSDT 00000000bdf1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.212476] ACPI: Dynamic OEM Table Load:
[    0.212479] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.224355] ACPI: Interpreter enabled
[    0.224359] ACPI: (supports S0 S3 S4 S5)
[    0.224385] ACPI: Using IOAPIC for interrupt routing
[    0.224409] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.224868] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.284278] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.284278] ACPI: No dock devices found.
[    0.284278] HEST: Table not found.
[    0.284278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.284616] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.285321] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.285324] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.285327] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.285330] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.285332] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.285335] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.285338] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.285354] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.285378] DMAR: Forcing write-buffer flush capability
[    0.285380] DMAR: Disabling IOMMU for graphics on this chipset
[    0.285411] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[    0.285458] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.285462] pci 0000:00:01.0: PME# disabled
[    0.285523] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.285593] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.285682] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.285740] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.285818] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.285889] pci 0000:00:1a.2: reg 20: [io  0x1840-0x185f]
[    0.285889] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.285889] pci 0000:00:1a.7: reg 10: [mem 0xfc504800-0xfc504bff]
[    0.285889] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1a.7: PME# disabled
[    0.285889] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.285889] pci 0000:00:1b.0: reg 10: [mem 0xfc500000-0xfc503fff 64bit]
[    0.285889] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1b.0: PME# disabled
[    0.285889] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.285889] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1c.0: PME# disabled
[    0.285889] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.285889] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1c.1: PME# disabled
[    0.285889] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[    0.285889] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1c.3: PME# disabled
[    0.285889] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[    0.285889] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1c.5: PME# disabled
[    0.285889] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.285889] pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
[    0.285889] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.285889] pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
[    0.285889] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.285889] pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
[    0.285889] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.285889] pci 0000:00:1d.7: reg 10: [mem 0xfc504c00-0xfc504fff]
[    0.285889] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1d.7: PME# disabled
[    0.285889] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.285889] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.285889] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.285889] pci 0000:00:1f.2: reg 10: [io  0x18f0-0x18f7]
[    0.285889] pci 0000:00:1f.2: reg 14: [io  0x18e4-0x18e7]
[    0.285897] pci 0000:00:1f.2: reg 18: [io  0x18e8-0x18ef]
[    0.285909] pci 0000:00:1f.2: reg 1c: [io  0x18e0-0x18e3]
[    0.285921] pci 0000:00:1f.2: reg 20: [io  0x18c0-0x18df]
[    0.285934] pci 0000:00:1f.2: reg 24: [mem 0xfc504000-0xfc5047ff]
[    0.286005] pci 0000:00:1f.2: PME# supported from D3hot
[    0.286010] pci 0000:00:1f.2: PME# disabled
[    0.286034] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.286058] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[    0.286090] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.286176] pci 0000:01:00.0: [1002:9553] type 0 class 0x000300
[    0.286192] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.286205] pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
[    0.286217] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfc00ffff]
[    0.286257] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.286311] pci 0000:01:00.0: supports D1 D2
[    0.286344] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[    0.286361] pci 0000:01:00.1: reg 10: [mem 0xfc010000-0xfc013fff]
[    0.286473] pci 0000:01:00.1: supports D1 D2
[    0.296037] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.296040] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.296044] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.296049] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.296110] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.296115] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.296120] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.296128] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.296442] pci 0000:04:00.0: [14e4:4315] type 0 class 0x000280
[    0.296508] pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8003fff 64bit]
[    0.296878] pci 0000:04:00.0: supports D1 D2
[    0.296880] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.296892] pci 0000:04:00.0: PME# disabled
[    0.297057] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.297062] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.297067] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.297075] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.297137] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.297142] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.297147] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.297155] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.297404] pci 0000:08:00.0: [14e4:1698] type 0 class 0x000200
[    0.297434] pci 0000:08:00.0: reg 10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.297638] pci 0000:08:00.0: PME# supported from D3hot D3cold
[    0.297645] pci 0000:08:00.0: PME# disabled
[    0.308189] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[    0.308197] pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.308255] pci 0000:09:01.0: [1180:0832] type 0 class 0x000c00
[    0.308273] pci 0000:09:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.308275] pci 0000:09:01.0: MMC cards are now supported by standard SDHCI controller
[    0.308293] pci 0000:09:01.0: reg 10: [mem 0xfc200000-0xfc2007ff]
[    0.308405] pci 0000:09:01.0: supports D1 D2
[    0.308408] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308413] pci 0000:09:01.0: PME# disabled
[    0.308437] pci 0000:09:01.1: [1180:0822] type 0 class 0x000805
[    0.308462] pci 0000:09:01.1: reg 10: [mem 0xfc200800-0xfc2008ff]
[    0.308575] pci 0000:09:01.1: supports D1 D2
[    0.308577] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308583] pci 0000:09:01.1: PME# disabled
[    0.308608] pci 0000:09:01.2: [1180:0592] type 0 class 0x000880
[    0.308633] pci 0000:09:01.2: reg 10: [mem 0xfc201000-0xfc2010ff]
[    0.308744] pci 0000:09:01.2: supports D1 D2
[    0.308746] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308751] pci 0000:09:01.2: PME# disabled
[    0.308776] pci 0000:09:01.3: [1180:0852] type 0 class 0x000880
[    0.308801] pci 0000:09:01.3: reg 10: [mem 0xfc201400-0xfc2014ff]
[    0.308913] pci 0000:09:01.3: supports D1 D2
[    0.308915] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308921] pci 0000:09:01.3: PME# disabled
[    0.308990] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[    0.308998] pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.309007] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.309010] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.309012] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.309015] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.309018] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.309021] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.309024] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.309061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.309206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.309257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.309333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.309386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.309438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.309479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.309537]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.309540]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.309542] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.317651] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.317713] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.317772] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.317829] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.317887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.317945] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.318003] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.318060] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.320615] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.320615] vgaarb: loaded
[    0.320615] vgaarb: bridge control possible 0000:01:00.0
[    0.320615] PCI: Using ACPI for IRQ routing
[    0.338905] PCI: pci_cache_line_size set to 64 bytes
[    0.340038] reserve RAM buffer: 000000000009c400 - 000000000009ffff 
[    0.340041] reserve RAM buffer: 00000000bdaa1000 - 00000000bfffffff 
[    0.340046] reserve RAM buffer: 00000000bdbba000 - 00000000bfffffff 
[    0.340051] reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff 
[    0.340056] reserve RAM buffer: 00000000bdf19000 - 00000000bfffffff 
[    0.340060] reserve RAM buffer: 00000000bdf63000 - 00000000bfffffff 
[    0.340063] reserve RAM buffer: 00000000bdfe3000 - 00000000bfffffff 
[    0.340066] reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
[    0.340205] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.340211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.340216] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.350451] Switching to clocksource hpet
[    0.350451] pnp: PnP ACPI init
[    0.350451] ACPI: bus type pnp registered
[    0.350663] pnp 00:00: [bus 00-ff]
[    0.350666] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.350669] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.350671] pnp 00:00: [io  0x0d00-0xffff window]
[    0.350674] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.350676] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.350679] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.350681] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.350683] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.350686] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.350688] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.350690] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.350693] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.350695] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.350697] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.350700] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.350702] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.350706] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.350708] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.350711] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.350792] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.350854] pnp 00:01: [io  0x0000-0x001f]
[    0.350857] pnp 00:01: [io  0x0081-0x0091]
[    0.350859] pnp 00:01: [io  0x0093-0x009f]
[    0.350861] pnp 00:01: [io  0x00c0-0x00df]
[    0.350864] pnp 00:01: [dma 4]
[    0.350895] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.350986] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    0.351071] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.351075] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.351089] pnp 00:03: [io  0x00f0]
[    0.351101] pnp 00:03: [irq 13]
[    0.351136] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.351151] pnp 00:04: [io  0x002e-0x002f]
[    0.351153] pnp 00:04: [io  0x004e-0x004f]
[    0.351155] pnp 00:04: [io  0x0061]
[    0.351157] pnp 00:04: [io  0x0063]
[    0.351159] pnp 00:04: [io  0x0065]
[    0.351161] pnp 00:04: [io  0x0067]
[    0.351163] pnp 00:04: [io  0x0068]
[    0.351165] pnp 00:04: [io  0x006c]
[    0.351167] pnp 00:04: [io  0x0070]
[    0.351169] pnp 00:04: [io  0x0080]
[    0.351170] pnp 00:04: [io  0x0092]
[    0.351172] pnp 00:04: [io  0x00b2-0x00b3]
[    0.351175] pnp 00:04: [io  0x0400-0x047f]
[    0.351177] pnp 00:04: [io  0x0680-0x069f]
[    0.351179] pnp 00:04: [io  0x0480-0x048f]
[    0.351181] pnp 00:04: [io  0xffff]
[    0.351183] pnp 00:04: [io  0xffff]
[    0.351185] pnp 00:04: [io  0x1000-0x107f]
[    0.351187] pnp 00:04: [io  0x1180-0x11ff]
[    0.351190] pnp 00:04: [io  0x164e-0x164f]
[    0.351192] pnp 00:04: [io  0xfe00]
[    0.351194] pnp 00:04: [io  0x0900-0x097f]
[    0.351269] system 00:04: [io  0x0400-0x047f] has been reserved
[    0.351272] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.351275] system 00:04: [io  0x0480-0x048f] has been reserved
[    0.351278] system 00:04: [io  0xffff] has been reserved
[    0.351281] system 00:04: [io  0xffff] has been reserved
[    0.351284] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.351287] system 00:04: [io  0x1180-0x11ff] has been reserved
[    0.351291] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.351294] system 00:04: [io  0xfe00] has been reserved
[    0.351296] system 00:04: [io  0x0900-0x097f] has been reserved
[    0.351300] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.351311] pnp 00:05: [io  0x0070-0x0077]
[    0.351318] pnp 00:05: [irq 8]
[    0.351350] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.351363] pnp 00:06: [io  0x0060]
[    0.351365] pnp 00:06: [io  0x0064]
[    0.351371] pnp 00:06: [irq 1]
[    0.351404] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.351420] pnp 00:07: [irq 12]
[    0.351454] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.351617] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.351620] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[    0.351622] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[    0.351624] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[    0.351626] pnp 00:08: [mem 0xe0000000-0xefffffff]
[    0.351629] pnp 00:08: [mem 0xfeb00000-0xfeb03fff]
[    0.351631] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.351633] pnp 00:08: [mem 0xfed40000-0xfed44fff]
[    0.351635] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[    0.351712] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.351715] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.351718] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.351721] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.351724] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.351728] system 00:08: [mem 0xfeb00000-0xfeb03fff] has been reserved
[    0.351731] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.351734] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.351737] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.351741] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.352801] pnp: PnP ACPI: found 9 devices
[    0.352803] ACPI: ACPI bus type pnp unregistered
[    0.360314] PCI: max bus depth: 1 pci_try_num: 2
[    0.360380] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
[    0.360390] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff 64bit] (PCI address [0xc0000000-0xc00000ff])
[    0.360395] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.360400] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
[    0.360404] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc020000-0xfc03ffff pref]
[    0.360407] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.360410] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.360414] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.360418] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360423] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.360426] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.360432] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.360437] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.360445] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.360449] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.360455] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.360460] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.360468] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.360471] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.360478] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.360483] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.360491] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[    0.360494] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
[    0.360500] pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.360505] pci 0000:00:1c.5:   bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.360514] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[    0.360520] pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.360546] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.360551] pci 0000:00:01.0: setting latency timer to 64
[    0.360562] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.360567] pci 0000:00:1c.0: setting latency timer to 64
[    0.360575] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.360580] pci 0000:00:1c.1: setting latency timer to 64
[    0.360590] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.360595] pci 0000:00:1c.3: setting latency timer to 64
[    0.360603] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.360608] pci 0000:00:1c.5: setting latency timer to 64
[    0.360616] pci 0000:00:1e.0: setting latency timer to 64
[    0.360620] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.360622] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.360625] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.360627] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.360630] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.360632] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.360634] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.360637] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.360639] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.360642] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360645] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.360647] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.360650] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.360652] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.360655] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.360657] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.360660] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.360662] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.360665] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.360667] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.360670] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
[    0.360672] pci_bus 0000:08: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.360675] pci_bus 0000:09: resource 1 [mem 0xfc200000-0xfc2fffff]
[    0.360677] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[    0.360680] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[    0.360682] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[    0.360684] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.360687] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.360689] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[    0.360692] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.360766] NET: Registered protocol family 2
[    0.360932] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.362278] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.366724] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.367268] TCP: Hash tables configured (established 524288 bind 65536)
[    0.367271] TCP reno registered
[    0.367291] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.367335] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.367524] NET: Registered protocol family 1
[    0.367565] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.367586] pci 0000:00:1a.0: PCI INT A disabled
[    0.367606] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.367625] pci 0000:00:1a.1: PCI INT B disabled
[    0.367634] pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.367655] pci 0000:00:1a.2: PCI INT C disabled
[    0.367666] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.367706] pci 0000:00:1a.7: PCI INT C disabled
[    0.367734] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.367754] pci 0000:00:1d.0: PCI INT A disabled
[    0.367763] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.367783] pci 0000:00:1d.1: PCI INT B disabled
[    0.367795] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.367815] pci 0000:00:1d.2: PCI INT C disabled
[    0.367826] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.367853] pci 0000:00:1d.7: PCI INT A disabled
[    0.367873] pci 0000:01:00.0: Boot video device
[    0.368277] PCI: CLS 64 bytes, default 64
[    0.368335] Unpacking initramfs...
[    0.640676] Freeing initrd memory: 10208k freed
[    0.645519] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.645525] Placing 64MB software IO TLB between ffff8800b9aa1000 - ffff8800bdaa1000
[    0.645527] software IO TLB at phys 0xb9aa1000 - 0xbdaa1000
[    0.645543] Simple Boot Flag at 0x36 set to 0x1
[    0.646104] audit: initializing netlink socket (disabled)
[    0.646119] type=2000 audit(1342697042.640:1): initialized
[    0.671243] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.694470] VFS: Disk quotas dquot_6.5.2
[    0.694512] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.694595] msgmni has been set to 7863
[    0.694775] alg: No test for stdrng (krng)
[    0.694814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.694818] io scheduler noop registered
[    0.694820] io scheduler deadline registered
[    0.694836] io scheduler cfq registered (default)
[    0.694948] pcieport 0000:00:01.0: setting latency timer to 64
[    0.694984] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.695044] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.695100] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.695184] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.695238] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.695321] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.695376] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.695456] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.695510] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    0.695624] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.695655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.695657] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.695907] acpiphp: Slot [1] registered
[    0.696044] intel_idle: MWAIT substates: 0x2220
[    0.696046] intel_idle: does not run on family 6 model 23
[    0.696075] ERST: Table is not found!
[    0.696077] GHES: HEST is not enabled!
[    0.696155] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.744377] Linux agpgart interface v0.103
[    0.744657] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.752734] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.752742] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.752902] mousedev: PS/2 mouse device common for all mice
[    0.752958] rtc_cmos 00:05: RTC can wake from S4
[    0.753099] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.753133] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.753145] cpuidle: using governor ladder
[    0.753146] cpuidle: using governor menu
[    0.753385] TCP cubic registered
[    0.753434] NET: Registered protocol family 10
[    0.753970] Mobile IPv6
[    0.753973] NET: Registered protocol family 17
[    0.753977] Registering the dns_resolver key type
[    0.754145] PM: Hibernation image not present or could not be loaded.
[    0.754157] registered taskstats version 1
[    0.766651] rtc_cmos 00:05: setting system clock to 2012-07-19 11:24:03 UTC (1342697043)
[    0.766721] Initializing network drop monitor service
[    0.768332] Freeing unused kernel memory: 612k freed
[    0.768500] Write protecting the kernel read-only data: 6144k
[    0.770974] Freeing unused kernel memory: 560k freed
[    0.774277] Freeing unused kernel memory: 720k freed
[    0.774812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.790915] udev[49]: starting version 164
[    0.855658] firewire_ohci 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.856738] tg3.c:v3.121 (November 2, 2011)
[    0.856915] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.857125] tg3 0000:08:00.0: setting latency timer to 64
[    0.858819] usbcore: registered new interface driver usbfs
[    0.858854] usbcore: registered new interface driver hub
[    0.859252] SCSI subsystem initialized
[    0.881041] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.881059] b43-pci-bridge 0000:04:00.0: setting latency timer to 64
[    0.884165] sdhci: Secure Digital Host Controller Interface driver
[    0.884168] sdhci: Copyright(c) Pierre Ossman
[    0.888387] usbcore: registered new device driver usb
[    0.889076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.889112] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.889138] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.889142] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.889172] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.889210] ehci_hcd 0000:00:1a.7: debug port 1
[    0.893093] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.897118] libata version 3.00 loaded.
[    0.898241] thermal LNXTHERM:00: registered as thermal_zone0
[    0.898244] ACPI: Thermal Zone [TZ00] (64 C)
[    0.898442] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504800
[    0.902606] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    0.902624] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    0.902642] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    0.902660] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    0.903889] thermal LNXTHERM:01: registered as thermal_zone1
[    0.903892] ACPI: Thermal Zone [TZ01] (53 C)
[    0.906274] thermal LNXTHERM:02: registered as thermal_zone2
[    0.906276] ACPI: Thermal Zone [TZ02] (64 C)
[    0.908105] firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[    0.908135] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[    0.908156] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.909214] mmc0: no vmmc regulator found
[    0.910251] Registered led device: mmc0::
[    0.912103] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.912317] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
[    0.913211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.913215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.913218] usb usb1: Product: EHCI Host Controller
[    0.913220] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[    0.913222] usb usb1: SerialNumber: 0000:00:1a.7
[    0.913358] hub 1-0:1.0: USB hub found
[    0.913363] hub 1-0:1.0: 6 ports detected
[    0.913470] ahci 0000:00:1f.2: version 3.0
[    0.913484] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.913562] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.913654] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    0.913658] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
[    0.913667] ahci 0000:00:1f.2: setting latency timer to 64
[    0.917748] scsi0 : ahci
[    0.917948] scsi1 : ahci
[    0.918073] scsi2 : ahci
[    0.918194] scsi3 : ahci
[    0.918316] scsi4 : ahci
[    0.918435] scsi5 : ahci
[    0.918508] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 45
[    0.918512] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 45
[    0.918514] ata3: DUMMY
[    0.918516] ata4: DUMMY
[    0.918517] ata5: DUMMY
[    0.918521] ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 45
[    0.918681] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.918719] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.918723] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.918737] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.918779] ehci_hcd 0000:00:1d.7: debug port 1
[    0.923522] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.923797] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[    0.933579] tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:fc:d0:f6
[    0.933584] tg3 0000:08:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    0.933587] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.933590] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.940024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.940055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.940058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.940060] usb usb2: Product: EHCI Host Controller
[    0.940062] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[    0.940064] usb usb2: SerialNumber: 0000:00:1d.7
[    0.940207] hub 2-0:1.0: USB hub found
[    0.940212] hub 2-0:1.0: 6 ports detected
[    0.941760] uhci_hcd: USB Universal Host Controller Interface driver
[    0.941815] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.941827] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.941831] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.941847] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.941898] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.941948] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.941951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.941953] usb usb3: Product: UHCI Host Controller
[    0.941955] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.941958] usb usb3: SerialNumber: 0000:00:1a.0
[    0.942096] hub 3-0:1.0: USB hub found
[    0.942101] hub 3-0:1.0: 2 ports detected
[    0.942195] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.942205] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.942208] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.942216] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.942257] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.942296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.942299] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.942301] usb usb4: Product: UHCI Host Controller
[    0.942303] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.942305] usb usb4: SerialNumber: 0000:00:1a.1
[    0.942428] hub 4-0:1.0: USB hub found
[    0.942433] hub 4-0:1.0: 2 ports detected
[    0.942520] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.942529] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.942532] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.942540] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.942571] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.942609] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.942612] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.942614] usb usb5: Product: UHCI Host Controller
[    0.942616] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.942618] usb usb5: SerialNumber: 0000:00:1a.2
[    0.942736] hub 5-0:1.0: USB hub found
[    0.942741] hub 5-0:1.0: 2 ports detected
[    0.942825] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.942834] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.942838] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.942845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.942877] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.942917] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.942920] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.942922] usb usb6: Product: UHCI Host Controller
[    0.942924] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.942926] usb usb6: SerialNumber: 0000:00:1d.0
[    0.943040] hub 6-0:1.0: USB hub found
[    0.943045] hub 6-0:1.0: 2 ports detected
[    0.943127] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.943137] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.943140] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.943148] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.943177] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.943217] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.943219] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.943222] usb usb7: Product: UHCI Host Controller
[    0.943224] usb usb7: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.943226] usb usb7: SerialNumber: 0000:00:1d.1
[    0.943345] hub 7-0:1.0: USB hub found
[    0.943350] hub 7-0:1.0: 2 ports detected
[    0.943434] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.943443] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.943447] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.943457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.943489] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.943530] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.943532] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.943535] usb usb8: Product: UHCI Host Controller
[    0.943537] usb usb8: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 uhci_hcd
[    0.943539] usb usb8: SerialNumber: 0000:00:1d.2
[    0.943656] hub 8-0:1.0: USB hub found
[    0.943662] hub 8-0:1.0: 2 ports detected
[    0.972303] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
[    1.252025] ata6: SATA link down (SStatus 0 SControl 300)
[    1.336022] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[    1.408125] firewire_core: created device fw0: GUID 314fc000185b9e21, S400
[    1.420028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.420050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.433959] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD18, max UDMA/100
[    1.447690] ata2.00: configured for UDMA/100
[    1.469757] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG000D, max UDMA/100
[    1.469760] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.470501] ata1.00: configured for UDMA/100
[    1.470640] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[    1.473230] scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640S HD18 PQ: 0 ANSI: 5
[    1.480519] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.480572] sd 0:0:0:0: [sda] Write Protect is off
[    1.480575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.480597] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.541004] usb 1-6: New USB device found, idVendor=0c45, idProduct=63ea
[    1.541008] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.541010] usb 1-6: Product: Laptop_Integrated_Webcam_2M
[    1.541012] usb 1-6: Manufacturer: CN0K143J724879710CVC
[    1.579196]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    1.579848] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.584551] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[    1.584556] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.584723] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.587743] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.587829] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.644030] Refined TSC clocksource calibration: 1994.999 MHz.
[    1.644036] Switching to clocksource tsc
[    1.652020] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[    1.784936] usb 2-3: New USB device found, idVendor=0781, idProduct=5406
[    1.784939] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.784942] usb 2-3: Product: U3 Cruzer Micro
[    1.784944] usb 2-3: Manufacturer: SanDisk
[    1.784946] usb 2-3: SerialNumber: 077421052D905B6E
[    1.788283] usbcore: registered new interface driver uas
[    1.789502] Initializing USB Mass Storage driver...
[    1.789636] scsi6 : usb-storage 2-3:1.0
[    1.789736] usbcore: registered new interface driver usb-storage
[    1.789738] USB Mass Storage support registered.
[    2.024016] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.201946] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
[    2.201950] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.201952] usb 3-1: Product: BCM2046B1
[    2.201954] usb 3-1: Manufacturer: Broadcom
[    2.205021] hub 3-1:1.0: USB hub found
[    2.206949] hub 3-1:1.0: 3 ports detected
[    2.485950] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[    2.516829] PM: Starting manual resume from disk
[    2.516834] PM: Hibernation image partition 8:5 present
[    2.516835] PM: Looking for hibernation image.
[    2.517048] PM: Image not found (code -22)
[    2.517050] PM: Hibernation image not present or could not be loaded.
[    2.547484] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.607968] usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157
[    2.607972] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.685952] usb 3-1.2: new full-speed USB device number 4 using uhci_hcd
[    2.788581] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[    2.789141] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.789693] sd 6:0:0:0: [sdb] 15753215 512-byte logical blocks: (8.06 GB/7.51 GiB)
[    2.790188] sd 6:0:0:0: [sdb] Write Protect is off
[    2.790191] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    2.790688] sd 6:0:0:0: [sdb] No Caching mode page present
[    2.790752] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.793063] sd 6:0:0:0: [sdb] No Caching mode page present
[    2.793124] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.794705]  sdb: sdb1
[    2.796940] sd 6:0:0:0: [sdb] No Caching mode page present
[    2.797002] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.797062] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    2.810946] usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158
[    2.810949] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.458614] udev[379]: starting version 164
[    4.751054] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.751061] ACPI: Power Button [PWRB]
[    4.751117] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    4.751121] ACPI: Sleep Button [SLPB]
[    4.751181] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    4.751994] ACPI: Lid Switch [LID0]
[    4.752091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.752096] ACPI: Power Button [PWRF]
[    4.821310] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[    4.832292] acpi device:03: registered as cooling_device0
[    4.832384] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[    4.832391] ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
[    4.886517] ACPI: Battery Slot [BAT0] (battery present)
[    4.902167] Monitor-Mwait will be used to enter C-1 state
[    4.902196] Monitor-Mwait will be used to enter C-2 state
[    4.902220] Monitor-Mwait will be used to enter C-3 state
[    4.902226] Marking TSC unstable due to TSC halts in idle
[    4.902243] ACPI: acpi_idle registered with cpuidle
[    4.902270] Switching to clocksource hpet
[    5.091993] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    5.092000] ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[    5.092029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.100138] ACPI: AC Adapter [ADP1] (on-line)
[    5.100548] wmi: Mapper loaded
[    5.626240] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    5.626334] r852: driver loaded successfully
[    5.655051] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.693965] usb 3-1.3: new full-speed USB device number 5 using uhci_hcd
[    5.700635] input: Dell WMI hotkeys as /devices/virtual/input/input6
[    5.836971] usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156
[    5.836977] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.836981] usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[    5.836985] usb 3-1.3: Manufacturer: Dell Computer Corp
[    6.034291] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    6.034417] r592: driver successfully loaded
[    6.036891] Linux media interface: v0.10
[    6.061736] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[    6.107018] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    6.165168] cfg80211: Calling CRDA to update world regulatory domain
[    6.177244] Bluetooth: Core ver 2.16
[    6.177276] NET: Registered protocol family 31
[    6.177278] Bluetooth: HCI device and connection manager initialized
[    6.177282] Bluetooth: HCI socket layer initialized
[    6.177284] Bluetooth: L2CAP socket layer initialized
[    6.177298] Bluetooth: SCO socket layer initialized
[    6.398023] Linux video capture interface: v2.00
[    6.421696] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea)
[    6.426569] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8
[    6.426666] usbcore: registered new interface driver uvcvideo
[    6.426668] USB Video Class driver (1.1.1)
[    6.481237] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.481913] usbcore: registered new interface driver btusb
[    6.522283] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input9
[    6.522406] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[    6.526324] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input10
[    6.526455] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[    6.526478] usbcore: registered new interface driver usbhid
[    6.526480] usbhid: USB HID core driver
[    6.661421] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.661425] Disabling lock debugging due to kernel taint
[    6.751813] [fglrx] Maximum main memory to use for locked dma buffers: 3771 MBytes.
[    6.752362] [fglrx]   vendor: 1002 device: 9553 count: 1
[    6.753181] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[    6.753199] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.753206] pci 0000:01:00.0: setting latency timer to 64
[    6.753541] [fglrx] Kernel PAT support is enabled
[    6.753566] [fglrx] module loaded - fglrx 8.96.4 [Apr  5 2012] with 1 minors
[    6.929442] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.929519] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    6.929553] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.991400] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[    7.065743] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[    7.074477] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.074570] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.074652] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    7.074912] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.075016] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[    7.075047] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    7.107189] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.107808] Registered led device: b43-phy0::tx
[    7.107833] Registered led device: b43-phy0::rx
[    7.107856] Registered led device: b43-phy0::radio
[    7.107876] Broadcom 43xx driver loaded [ Features: PMNLS ]
[    7.234350] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    7.234507] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    9.284589] Adding 3895724k swap on /dev/sda5.  Priority:-1 extents:1 across:3895724k 
[    9.350355] Adding 2032184k swap on /dev/sda8.  Priority:-2 extents:1 across:2032184k 
[    9.354830] EXT4-fs (sda7): re-mounted. Opts: (null)
[   10.055864] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   10.320325] loop: module loaded
[   11.680428] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   11.975061] fuse init (API version 7.17)
[   12.699891] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.900299] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   22.433849] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.438070] tg3 0000:08:00.0: irq 48 for MSI/MSI-X
[   22.543009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.869949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.869953] Bluetooth: BNEP filters: protocol multicast
[   24.914972] Bridge firewalling registered
[   24.920886] Bluetooth: RFCOMM TTY layer initialized
[   24.920891] Bluetooth: RFCOMM socket layer initialized
[   24.920894] Bluetooth: RFCOMM ver 1.11
[   26.738764] lp: driver loaded but no devices found
[   26.808635] ppdev: user-space parallel port driver
[   27.328690] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[   27.329847] [fglrx] Firegl kernel thread PID: 1559
[   27.329985] [fglrx] Firegl kernel thread PID: 1560
[   27.330118] [fglrx] Firegl kernel thread PID: 1561
[   27.330291] [fglrx] IRQ 49 Enabled

Dell Studio 1555

Offline

#45 2012-07-19 11:09:05

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

[   28.158599] [fglrx] Gart USWC size:1232 M.
[   28.158603] [fglrx] Gart cacheable size:487 M.
[   28.158611] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   28.158614] [fglrx] Reserved FB block: Unshared offset:fc20000, size:3db000 
[   28.158617] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 
[   28.373755] sshd (1653): /proc/1653/oom_adj is deprecated, please use /proc/1653/oom_score_adj instead.
[   82.862509] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   83.657179] wlan0: authenticate with f8:d1:11:b9:87:ba (try 1)
[   83.660592] wlan0: authenticated
[   83.660646] wlan0: associate with f8:d1:11:b9:87:ba (try 1)
[   83.663462] wlan0: RX AssocResp from f8:d1:11:b9:87:ba (capab=0x431 status=0 aid=1)
[   83.663466] wlan0: associated
[   83.665700] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   83.848549] Intel AES-NI instructions are not detected.
[   93.876022] wlan0: no IPv6 routers present
[  361.110845] wlan0: deauthenticating from f8:d1:11:b9:87:ba by local choice (reason=3)
[  361.140472] cfg80211: Calling CRDA to update world regulatory domain
[  362.444558] wlan0: authenticate with f8:d1:11:b9:87:ba (try 1)
[  362.446394] wlan0: authenticated
[  362.446437] wlan0: associate with f8:d1:11:b9:87:ba (try 1)
[  362.449256] wlan0: RX AssocResp from f8:d1:11:b9:87:ba (capab=0x431 status=0 aid=1)
[  362.449262] wlan0: associated
[  508.105562] wlan0: deauthenticating from f8:d1:11:b9:87:ba by local choice (reason=3)
[  508.148453] cfg80211: Calling CRDA to update world regulatory domain
[  509.440942] wlan0: authenticate with f8:d1:11:b9:87:ba (try 1)
[  509.444262] wlan0: authenticated
[  509.444310] wlan0: associate with f8:d1:11:b9:87:ba (try 1)
[  509.447106] wlan0: RX AssocResp from f8:d1:11:b9:87:ba (capab=0x431 status=0 aid=1)
[  509.447112] wlan0: associated
[ 4242.523868] CE: hpet increased min_delta_ns to 20113 nsec

Dell Studio 1555

Offline

#46 2012-07-19 11:19:56

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

lsmod

Module                  Size  Used by
snd_seq_dummy          12503  0 
cryptd                 14463  0 
aes_x86_64             16796  2 
aes_generic            37122  1 aes_x86_64
acpi_cpufreq           12893  1 
mperf                  12411  1 acpi_cpufreq
cpufreq_stats          12762  0 
cpufreq_powersave      12454  0 
cpufreq_conservative    13147  0 
cpufreq_userspace      12576  0 
parport_pc             22191  0 
ppdev                  12725  0 
lp                     17190  0 
parport                31650  3 parport_pc,ppdev,lp
rfcomm                 32745  11 
bridge                 69831  0 
stp                    12392  1 bridge
bnep                   17386  2 
fuse                   61427  7 
nls_utf8               12456  1 
nls_cp437              16553  1 
vfat                   17165  1 
fat                    45238  1 vfat
loop                   22699  0 
firewire_sbp2          17741  0 
snd_hda_codec_hdmi     30578  1 
arc4                   12458  2 
snd_hda_codec_idt      57591  1 
b43                   311660  0 
snd_hda_intel          26023  6 
snd_hda_codec          81579  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
fglrx                3193987  132 
snd_hwdep              13148  1 snd_hda_codec
usbhid                 39946  0 
btusb                  17417  2 
mac80211              195629  1 b43
uvcvideo               57559  0 
hid                    80937  1 usbhid
videodev               70686  1 uvcvideo
joydev                 17138  0 
snd_pcm                67465  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
bluetooth             122093  23 rfcomm,bnep,btusb
cfg80211              140318  2 b43,mac80211
snd_seq                44678  1 snd_seq_dummy
media                  18148  2 uvcvideo,videodev
r592                   17576  0 
v4l2_compat_ioctl32    16663  1 videodev
snd_timer              22658  3 snd_pcm,snd_seq
bcma                   23702  1 b43
dell_laptop            17025  0 
rfkill                 18970  5 bluetooth,cfg80211,dell_laptop
dell_wmi               12477  0 
memstick               13726  1 r592
dcdbas                 13256  1 dell_laptop
sparse_keymap          12760  1 dell_wmi
evdev                  17512  21 
r852                   17768  0 
sm_common              16450  1 r852
nand                   44263  2 r852,sm_common
nand_ids               12313  1 nand
mtd                    24206  2 sm_common,nand
nand_ecc               12444  1 nand
tpm_tis                17315  0 
snd_seq_device         13155  2 snd_seq_dummy,snd_seq
psmouse                64191  0 
snd                    52458  19 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
tpm                    17841  1 tpm_tis
i2c_i801               16870  0 
i2c_core               23766  2 videodev,i2c_i801
tpm_bios               12903  1 tpm
wmi                    13243  1 dell_wmi
serio_raw              12875  0 
ac                     12624  0 
processor              27588  3 acpi_cpufreq
battery                13109  0 
rng_core               12614  1 b43
power_supply           13475  3 dell_laptop,ac,battery
video                  17553  0 
soundcore              13014  1 snd
snd_page_alloc         12969  2 snd_hda_intel,snd_pcm
button                 12895  1 fglrx
ext4                  355363  2 
mbcache                12930  1 ext4
jbd2                   60877  1 ext4
crc16                  12343  2 bluetooth,ext4
usb_storage            43590  0 
uas                    13151  0 
sg                     25769  0 
sr_mod                 21824  0 
cdrom                  35139  1 sr_mod
sd_mod                 35644  8 
crc_t10dif             12348  1 sd_mod
uhci_hcd               26529  0 
ahci                   24997  7 
libahci                22714  1 ahci
ehci_hcd               39586  0 
sdhci_pci              17809  0 
sdhci                  26405  1 sdhci_pci
thermal                17330  0 
thermal_sys            17992  3 processor,video,thermal
ssb                    44219  1 b43
libata                139579  2 ahci,libahci
scsi_mod              161684  7 firewire_sbp2,usb_storage,uas,sg,sr_mod,sd_mod,libata
firewire_ohci          35248  0 
mmc_core               71931  4 b43,sdhci_pci,ssb,sdhci
pcmcia                 32719  2 b43,ssb
pcmcia_core            18333  1 pcmcia
tg3                   122366  0 
libphy                 18759  1 tg3
firewire_core          47887  2 firewire_sbp2,firewire_ohci
crc_itu_t              12347  1 firewire_core
usbcore               127444  8 usbhid,btusb,uvcvideo,usb_storage,uas,uhci_hcd,ehci_hcd
usb_common             12354  1 usbcore

Dell Studio 1555

Offline

#47 2012-07-19 19:00:35

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,307

Re: My wireless disconnects constantly

I had an install of statler on a partition that I do not normally use.
Upgraded the kernel to the last one in backports just now.
I use b43, but different card:

03:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
    Subsystem: Wistron NeWeb Corp. TravelMate 290E WLAN Mini-PCI Card [185f:1220]
    Kernel driver in use: b43-pci-bridge

I noticed that the firmware used is really old:

[   12.848052] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)

Now I normally run a crunchified sid version, which uses a much more recent version of firmware.

So. I copied the complete folder /lib/firmware/b43 from the SID install to the statler version.

After reboot, I have

[   15.476040] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)

My card works without problems with the new firmware.
I dont use it intensively enough to have experienced any disconnects.

If you are interested in testing this, you could:
(1) enable unstable
(2) sudo apt-get update
(3) sudo apt-get --reinstall -t unstable firmware-b43-installer
Should install b43-fwcutter, which in turn should install the newer firmware to /lib/firmware/b43
(4) Reboot
(5) Check if wireless works, and check if it is using the new FW:
dmesg|grep firmware.
(6) Test if you still get those disconnects...

(7) To prevent other packages from being installed from unstable:
(a) remove the unstable repo from your apt sources
(b) sudo apt-get update

Should you run into trouble, you can always revert to the old firmware version by re-installing firmware-b43-installer from the stable repo.

Let us know if this works for you.

hth

bootinfoscript - emacs primer - I ♥ #!

Offline

#48 2012-07-20 09:39:10

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

Ok, I'll try that.

The thing is, yesterday it disconnected only about three times in the morning, and later it was fine... or I didn't notice the disconnect.

So I'll try the above and wait one day or so. I'll try doing the same for my bluetooth, maybe I'll finally get that going too.

p.s. the above:

(3) sudo apt-get --reinstall -t unstable firmware-b43-installer

Didn't seem to work so I did it through synaptic

Dell Studio 1555

Offline

#49 2012-07-20 10:19:59

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

Crunch Bang... Just broke something playing around with bluetooth smile But I guess that's something for a new topic...

Dell Studio 1555

Offline

Help fund CrunchBang, donate to the project!

#50 2012-07-20 11:49:34

hq
Member
From: Poland
Registered: 2011-11-30
Posts: 44
Website

Re: My wireless disconnects constantly

Yes! I got my wireless to work again. But I think I messed up some things I will regret in the future...

Synaptic is kinda messed up... I can't quick search and I can't change the repos

Last edited by hq (2012-07-20 11:50:33)

Dell Studio 1555

Offline

Pages: 1 2 3

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo