SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

Pages: 1 2 3 4

#26 2012-05-28 21:09:38

Fetus
Member
Registered: 2012-03-13
Posts: 12

Re: The definitive guide to proprietary AMD graphics drivers

Could someone notify me when this works again?

Tried it today, no hope. Still gave me that error that's been mentioned up there.

Offline

Help fund CrunchBang, donate to the project!

#27 2012-05-28 21:29:35

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,644

Re: The definitive guide to proprietary AMD graphics drivers

Good, AMD is such a piece of ultimate crap.
@Unia, I'm running at 20 percent of CPU for two hours now and 

elkoraco@mrdeb ~/firefox % acpi -t
Thermal 0: ok, 0.0 degrees C
Thermal 1: ok, 0.0 degrees C
Thermal 2: ok, 0.0 degrees C
Thermal 3: ok, 25.0 degrees C
Thermal 4: ok, 37.0 degrees C
Thermal 5: ok, 28.0 degrees C
Thermal 6: ok, 0.0 degrees C
Thermal 7: ok, 35.0 degrees C

Offline

#28 2012-05-28 21:32:21

Unia
#! Die Hard
From: The Netherlands
Registered: 2010-07-17
Posts: 3,102

Re: The definitive guide to proprietary AMD graphics drivers

Oh, nice. I'm having a webcam call for about an hour now:

Thermal 1: ok, 65.0 degrees C

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres
      Github || Deviantart

Offline

#29 2012-06-05 22:06:41

wheelofcheese
New Member
Registered: 2012-06-05
Posts: 5

Re: The definitive guide to proprietary AMD graphics drivers

This is really useful stuff. If only Nvidia had made a decent agp card.

Offline

#30 2012-06-12 22:43:56

beadmaze
#! Junkie
Registered: 2009-10-10
Posts: 325

Re: The definitive guide to proprietary AMD graphics drivers

Unia wrote:

It should appear in a week. On average, it appears between 20-25th of the month. I'm looking forward to it as well, as it's said to bring xorg 1.12 support.

is it on yet?

We are a nice, friendly community here and I hope we stay that way.

Offline

#31 2012-06-12 22:46:54

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,644

Re: The definitive guide to proprietary AMD graphics drivers

Nup, there won't be a 12.5 release, they're going straight for 12.6. There are beta builds, but I haven't looked for them. One should be in the Sid repos I think.

Offline

#32 2012-06-13 13:36:08

Unia
#! Die Hard
From: The Netherlands
Registered: 2010-07-17
Posts: 3,102

Re: The definitive guide to proprietary AMD graphics drivers

I tested it on my laptop and it works good with Xorg 1.12 (don't know which version you have @ Debian though) and kernel 3.3. There are patches to get it working on 3.4 but I didn't look into those yet.

The only issue I had was flashing in Mplayer when watching a movie.

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres
      Github || Deviantart

Offline

#33 2012-06-17 10:10:40

Anakinholland
#! CrunchBanger
Registered: 2011-11-30
Posts: 115

Re: The definitive guide to proprietary AMD graphics drivers

Cheers for this el_koraco!

I just used this manual to run it on Mint 13 (I know, not #!, but debian-through-ubuntu based, so I thought "why the hell not?") and now I came into Limbo...

Kernel 3.2.0-25 won't boot, init just sits there after failing "Loading cpufreq kernel modules", older kernel 3.2.0-24 does boot, even has the setting radeon.modeset=0, but the mouse won't work. Doh!

Rebooted into 3.2.0-25 recovery mode, and start sfgxi again, after which everything went fine, albeit Cinnamon seems to have dropped into some sort of fallback-mode, but that's a different issue I'll look into shortly.

Cheers,

Anakin

Use what you like. If you don't like it, improve it. If you can't, look for something else.

Offline

#34 2012-06-29 22:10:16

z_skie
#! Member
From: Slovenia
Registered: 2012-05-17
Posts: 90

Re: The definitive guide to proprietary AMD graphics drivers

I just did the smxi thing on statler and my ati radeon hd5000 and it worked perfectly!! big_smile
I have to say that this is a pretty good guide! thank you!! smile smile
it got the temperature down by 8-12 °C smile

Last edited by z_skie (2012-07-01 08:57:52)

Live and let love in.

Offline

#35 2012-07-01 12:12:23

protacticus
Member
Registered: 2012-07-01
Posts: 24

Re: The definitive guide to proprietary AMD graphics drivers

Please help me, when I install fglrx (ver. 12.6, first I use smxi methode unsuccessfully, then try with manual methode) my system can not boot properly!?

Please find attached xorg.0.log

Thank you all in advanced


[   197.217] 
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[   197.217] X Protocol Version 11, Revision 0
[   197.217] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[   197.217] Current Operating System: Linux stealth 3.2.0-2-amd64 #1 SMP Mon Jun 11 17:24:18 UTC 2012 x86_64
[   197.217] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=a5f4e4be-8d35-496f-9fbc-f289e9141990 ro quiet nomodeset radeon.modeset=0
[   197.217] Build Date: 20 May 2012  08:57:17AM
[   197.217] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>) 
[   197.217] Current version of pixman: 0.24.4
[   197.217]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   197.217] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   197.217] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  1 13:40:50 2012
[   197.238] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   197.238] (==) No Layout section.  Using the first Screen section.
[   197.238] (==) No screen section available. Using defaults.
[   197.238] (**) |-->Screen "Default Screen Section" (0)
[   197.238] (**) |   |-->Monitor "<default monitor>"
[   197.239] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   197.239] (==) Automatically adding devices
[   197.239] (==) Automatically enabling devices
[   197.239] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   197.239]     Entry deleted from font path.
[   197.239] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   197.239]     Entry deleted from font path.
[   197.239] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   197.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[   197.239] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   197.239] (II) Loader magic: 0x7fc835d8aae0
[   197.239] (II) Module ABI versions:
[   197.239]     X.Org ANSI C Emulation: 0.4
[   197.239]     X.Org Video Driver: 12.0
[   197.239]     X.Org XInput driver : 16.0
[   197.239]     X.Org Server Extension : 6.0
[   197.241] (--) PCI:*(0:1:0:0) 1002:68e0:103c:142d rev 0, Mem @ 0xc0000000/268435456, 0xd4200000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[   197.241] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   197.241] (II) LoadModule: "extmod"
[   197.242] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   197.242] (II) Module extmod: vendor="X.Org Foundation"
[   197.242]     compiled for 1.12.1.902, module version = 1.0.0
[   197.242]     Module class: X.Org Server Extension
[   197.242]     ABI class: X.Org Server Extension, version 6.0
[   197.243] (II) Loading extension SELinux
[   197.243] (II) Loading extension MIT-SCREEN-SAVER
[   197.243] (II) Loading extension XFree86-VidModeExtension
[   197.243] (II) Loading extension XFree86-DGA
[   197.243] (II) Loading extension DPMS
[   197.243] (II) Loading extension XVideo
[   197.243] (II) Loading extension XVideo-MotionCompensation
[   197.243] (II) Loading extension X-Resource
[   197.243] (II) LoadModule: "dbe"
[   197.243] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   197.243] (II) Module dbe: vendor="X.Org Foundation"
[   197.243]     compiled for 1.12.1.902, module version = 1.0.0
[   197.243]     Module class: X.Org Server Extension
[   197.243]     ABI class: X.Org Server Extension, version 6.0
[   197.243] (II) Loading extension DOUBLE-BUFFER
[   197.243] (II) LoadModule: "glx"
[   197.244] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   197.244] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   197.244]     compiled for 6.9.0, module version = 1.0.0
[   197.245] (II) Loading extension GLX
[   197.245] (II) LoadModule: "record"
[   197.245] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   197.245] (II) Module record: vendor="X.Org Foundation"
[   197.245]     compiled for 1.12.1.902, module version = 1.13.0
[   197.245]     Module class: X.Org Server Extension
[   197.245]     ABI class: X.Org Server Extension, version 6.0
[   197.245] (II) Loading extension RECORD
[   197.245] (II) LoadModule: "dri"
[   197.246] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   197.246] (II) Module dri: vendor="X.Org Foundation"
[   197.246]     compiled for 1.12.1.902, module version = 1.0.0
[   197.246]     ABI class: X.Org Server Extension, version 6.0
[   197.246] (II) Loading extension XFree86-DRI
[   197.246] (II) LoadModule: "dri2"
[   197.246] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   197.246] (II) Module dri2: vendor="X.Org Foundation"
[   197.247]     compiled for 1.12.1.902, module version = 1.2.0
[   197.247]     ABI class: X.Org Server Extension, version 6.0
[   197.247] (II) Loading extension DRI2
[   197.247] (==) Matched ati as autoconfigured driver 0
[   197.247] (==) Matched vesa as autoconfigured driver 1
[   197.247] (==) Matched fbdev as autoconfigured driver 2
[   197.247] (==) Assigned the driver to the xf86ConfigLayout
[   197.247] (II) LoadModule: "ati"
[   197.247] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   197.264] (II) Module ati: vendor="X.Org Foundation"
[   197.264]     compiled for 1.12.1.902, module version = 6.14.4
[   197.264]     Module class: X.Org Video Driver
[   197.264]     ABI class: X.Org Video Driver, version 12.0
[   197.264] (II) LoadModule: "radeon"
[   197.265] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   197.327] (II) Module radeon: vendor="X.Org Foundation"
[   197.327]     compiled for 1.12.1.902, module version = 6.14.4
[   197.327]     Module class: X.Org Video Driver
[   197.327]     ABI class: X.Org Video Driver, version 12.0
[   197.327] (II) LoadModule: "vesa"
[   197.327] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   197.335] (II) Module vesa: vendor="X.Org Foundation"
[   197.335]     compiled for 1.12.1, module version = 2.3.1
[   197.335]     Module class: X.Org Video Driver
[   197.335]     ABI class: X.Org Video Driver, version 12.0
[   197.335] (II) LoadModule: "fbdev"
[   197.336] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   197.338] (II) Module fbdev: vendor="X.Org Foundation"
[   197.338]     compiled for 1.12.1, module version = 0.4.2
[   197.338]     ABI class: X.Org Video Driver, version 12.0
[   197.338] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA
[   197.346] (II) VESA: driver for VESA chipsets: vesa
[   197.347] (II) FBDEV: driver for framebuffer: fbdev
[   197.347] (++) using VT number 7

[   197.353] (II) [KMS] drm report modesetting isn't supported.
[   197.353] (WW) Falling back to old probe method for vesa
[   197.353] (WW) Falling back to old probe method for fbdev
[   197.353] (II) Loading sub module "fbdevhw"
[   197.353] (II) LoadModule: "fbdevhw"
[   197.354] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   197.371] (II) Module fbdevhw: vendor="X.Org Foundation"
[   197.371]     compiled for 1.12.1.902, module version = 0.0.2
[   197.371]     ABI class: X.Org Video Driver, version 12.0
[   197.372] (EE) open /dev/fb0: No such file or directory
[   197.372] (II) RADEON(0): TOTO SAYS 00000000d4200000
[   197.372] (II) RADEON(0): MMIO registers at 0x00000000d4200000: size 128KB
[   197.372] (II) RADEON(0): PCI bus 1 card 0 func 0
[   197.372] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   197.372] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   197.372] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   197.372] (==) RADEON(0): Default visual is TrueColor
[   197.372] (II) Loading sub module "vgahw"
[   197.372] (II) LoadModule: "vgahw"
[   197.373] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   197.374] (II) Module vgahw: vendor="X.Org Foundation"
[   197.374]     compiled for 1.12.1.902, module version = 0.1.0
[   197.374]     ABI class: X.Org Video Driver, version 12.0
[   197.374] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   197.374] (==) RADEON(0): RGB weight 888
[   197.374] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   197.374] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[   197.374] (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
[   197.374] (II) RADEON(0): PCIE card detected
[   197.374] (II) Loading sub module "int10"
[   197.374] (II) LoadModule: "int10"
[   197.375] (II) Loading /usr/lib/xorg/modules/libint10.so
[   197.393] (II) Module int10: vendor="X.Org Foundation"
[   197.394]     compiled for 1.12.1.902, module version = 1.0.0
[   197.394]     ABI class: X.Org Video Driver, version 12.0
[   197.394] (II) RADEON(0): initializing int10
[   197.401] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[   197.402] (II) RADEON(0): ATOM BIOS detected
[   197.418] (II) RADEON(0): ATOM BIOS Rom: 
[   197.418]     SubsystemVendorID: 0x103c SubsystemID: 0x142d
[   197.418]     IOBaseAddress: 0x5000
[   197.418]     Filename: BR39119.001 
[   197.419]     BIOS Bootup Message: 
HP Patek ParkXT DDR3 64/128Mx16                                             

[   197.419] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[   197.419] (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
[   197.419] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[   197.419] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
[   197.419] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[   197.419] (II) RADEON(0): Default Engine Clock: 750000
[   197.419] (II) RADEON(0): Default Memory Clock: 800000
[   197.419] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[   197.419] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[   197.419] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 27000
[   197.419] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6750
[   197.419] (II) RADEON(0): Maximum Pixel Clock: 400000
[   197.419] (II) RADEON(0): Reference Clock: 27000
[   197.419] (II) RADEON(0): No DRI yet on Evergreen
[   197.419] (II) RADEON(0): using shadow framebuffer
[   197.419] (II) Loading sub module "shadow"
[   197.419] (II) LoadModule: "shadow"
[   197.420] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   197.421] (II) Module shadow: vendor="X.Org Foundation"
[   197.421]     compiled for 1.12.1.902, module version = 1.1.0
[   197.421]     ABI class: X.Org ANSI C Emulation, version 0.4
[   197.421] (II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
[   197.421] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
[   197.421] (II) RADEON(0): Color tiling disabled
[   197.421] (II) Loading sub module "ddc"
[   197.421] (II) LoadModule: "ddc"
[   197.421] (II) Module "ddc" already built-in
[   197.421] (II) Loading sub module "i2c"
[   197.421] (II) LoadModule: "i2c"
[   197.421] (II) Module "i2c" already built-in
[   197.421] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
[   197.421] (WW) RADEON(0): LVDS Info:
XRes: 1366, YRes: 768, DotClock: 69300
HBlank: 100, HOverPlus: 16, HSyncWidth: 34
VBlank: 20, VOverPlus: 2, VSyncWidth: 6
[   197.421] (II) RADEON(0): Output LVDS has no monitor section
[   197.421] (II) RADEON(0): I2C bus "LVDS" initialized.
[   197.421] (II) RADEON(0): Output HDMI-0 has no monitor section
[   197.421] (II) RADEON(0): I2C bus "HDMI-0" initialized.
[   197.421] (II) RADEON(0): Output VGA-0 has no monitor section
[   197.421] (II) RADEON(0): I2C bus "VGA-0" initialized.
[   197.421] (II) RADEON(0): Port0:
[   197.421]   XRANDR name: LVDS
[   197.421]   Connector: LVDS
[   197.422]   LCD1: INTERNAL_UNIPHY
[   197.422]   DDC reg: 0x6560
[   197.422] (II) RADEON(0): Port1:
[   197.422]   XRANDR name: HDMI-0
[   197.422]   Connector: HDMI-A
[   197.422]   DFP1: INTERNAL_UNIPHY1
[   197.422]   DDC reg: 0x6430
[   197.422] (II) RADEON(0): Port2:
[   197.422]   XRANDR name: VGA-0
[   197.422]   Connector: VGA
[   197.422]   CRT1: INTERNAL_KLDSCP_DAC1
[   197.422]   DDC reg: 0x64d8
[   197.422] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
[   197.425] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[   197.425] finished output detect: 0
[   197.425] (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
[   197.429] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[   197.429] finished output detect: 1
[   197.429] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[   197.439] Dac detection success
[   197.439] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[   197.439] finished output detect: 2
[   197.439] finished all detect
[   197.442] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[   197.442] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[   197.442] (II) RADEON(0): Added native panel mode: 1366x768
[   197.443] (II) RADEON(0): Printing probed modes for output LVDS
[   197.443] (II) RADEON(0): Modeline "1366x768"x60.0   69.30  1366 1382 1416 1466  768 770 776 788 (47.3 kHz eP)
[   197.443] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[   197.443] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz e)
[   197.443] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[   197.443] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[   197.443] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[   197.446] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[   197.446] (II) RADEON(0): EDID for output HDMI-0
[   197.456] Dac detection success
[   197.456] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[   197.456] (II) RADEON(0): EDID for output VGA-0
[   197.456] (II) RADEON(0): Output LVDS connected
[   197.456] (II) RADEON(0): Output HDMI-0 disconnected
[   197.456] (II) RADEON(0): Output VGA-0 disconnected
[   197.456] (II) RADEON(0): Using exact sizes for initial modes
[   197.456] (II) RADEON(0): Output LVDS using initial mode 1366x768
[   197.456] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   197.456] (==) RADEON(0): DPI set to (96, 96)
[   197.456] (II) Loading sub module "fb"
[   197.456] (II) LoadModule: "fb"
[   197.457] (II) Loading /usr/lib/xorg/modules/libfb.so
[   197.474] (II) Module fb: vendor="X.Org Foundation"
[   197.474]     compiled for 1.12.1.902, module version = 1.0.0
[   197.474]     ABI class: X.Org ANSI C Emulation, version 0.4
[   197.475] (II) Loading sub module "ramdac"
[   197.475] (II) LoadModule: "ramdac"
[   197.475] (II) Module "ramdac" already built-in
[   197.475] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[   197.475] (II) UnloadModule: "vesa"
[   197.475] (II) Unloading vesa
[   197.475] (II) UnloadModule: "fbdev"
[   197.475] (II) Unloading fbdev
[   197.475] (II) UnloadSubModule: "fbdevhw"
[   197.475] (II) Unloading fbdevhw
[   197.475] (--) Depth 24 pixmap format is 32 bpp
[   197.475] (II) RADEON(0): RADEONScreenInit c0000000 0 0
[   197.680] Output UNIPHY0 transmitter setup success
[   197.680] Blank CRTC 0 success
[   197.680] Disable CRTC memreq 0 success
[   197.686] Disable CRTC 0 success
[   197.686] Blank CRTC 1 success
[   197.686] Disable CRTC memreq 1 success
[   197.686] Disable CRTC 1 success
[   197.686] Blank CRTC 2 success
[   197.686] Disable CRTC memreq 2 success
[   197.686] Disable CRTC 2 success
[   197.686] Blank CRTC 3 success
[   197.686] Disable CRTC memreq 3 success
[   197.686] Disable CRTC 3 success
[   197.686] Blank CRTC 4 success
[   197.686] Disable CRTC memreq 4 success
[   197.686] Disable CRTC 4 success
[   197.686] Blank CRTC 5 success
[   197.686] Disable CRTC memreq 5 success
[   197.686] Disable CRTC 5 success
[   197.686] (II) RADEON(0): Dynamic Power Management Disabled
[   197.686] mc fb loc is 00df00c0
[   197.686] (II) RADEON(0): RADEONInitMemoryMap() : 
[   197.686] (II) RADEON(0):   mem_size         : 0x20000000
[   197.686] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0
[   197.686] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[   197.686] (II) RADEON(0): Depth moves disabled by default
[   197.686] (II) RADEON(0): Memory manager initialized to (0,0) (1536,8191)
[   197.687] (II) RADEON(0): Reserved area from (0,1366) to (1536,1368)
[   197.687] (II) RADEON(0): Largest offscreen area available: 1536 x 6823
[   197.729] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[   197.729] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x001f0000
[   197.729] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[   197.739] (==) RADEON(0): Backing store disabled
[   197.739] (WW) RADEON(0): Direct rendering disabled
[   197.739] (EE) RADEON(0): Acceleration initialization failed
[   197.739] (II) RADEON(0): Acceleration disabled
[   197.739] (==) RADEON(0): DPMS enabled
[   197.739] (==) RADEON(0): Silken mouse enabled
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 0 at offset 0x00804000
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 1 at offset 0x0080a000
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 2 at offset 0x00810000
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 3 at offset 0x00816000
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 4 at offset 0x0081c000
[   197.739] (II) RADEON(0): Will use 96 kb for hardware cursor 5 at offset 0x00822000
[   197.739] (II) RADEON(0): Largest offscreen area available: 1536 x 6799
[   197.739] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
[   197.743] Output UNIPHY0 transmitter setup success
[   197.743] Output UNIPHY1 transmitter setup success
[   197.743] Output CRT1 disable success
[   197.743] Blank CRTC 0 success
[   197.743] Disable CRTC memreq 0 success
[   197.743] Disable CRTC 0 success
[   197.743] Blank CRTC 1 success
[   197.743] Disable CRTC memreq 1 success
[   197.743] Disable CRTC 1 success
[   197.743] Blank CRTC 2 success
[   197.743] Disable CRTC memreq 2 success
[   197.743] Disable CRTC 2 success
[   197.743] Blank CRTC 3 success
[   197.743] Disable CRTC memreq 3 success
[   197.743] Disable CRTC 3 success
[   197.743] Blank CRTC 4 success
[   197.743] Disable CRTC memreq 4 success
[   197.743] Disable CRTC 4 success
[   197.744] Blank CRTC 5 success
[   197.744] Disable CRTC memreq 5 success
[   197.744] Disable CRTC 5 success
[   197.753] Output UNIPHY0 transmitter setup success
[   197.753] Blank CRTC 0 success
[   197.753] Disable CRTC memreq 0 success
[   197.753] Disable CRTC 0 success
[   197.753] Set CRTC 0 Source success
[   197.753] Mode 1366x768 - 1466 788 0
[   197.753] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[   197.753] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
[   197.753] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[   197.763] Set DCPLL success
[   197.764] Picked PLL 0
[   197.764] before 6930 0x0
[   197.764] after 6930 0 0
[   197.764] best_freq: 69352
[   197.764] best_feedback_div: 131
[   197.764] best_frac_feedback_div: 0
[   197.764] best_ref_div: 3
[   197.764] best_post_div: 17
[   197.764] (II) RADEON(0): crtc(0) Clock: mode 69300, PLL 693520
[   197.764] (II) RADEON(0): crtc(0) PLL  : refdiv 3, fbdiv 0x83(131), fracfbdiv 0, pdiv 17
[   197.768] Set CRTC 0 PLL success
[   197.768] Set DTD CRTC Timing success
[   197.768] Set CRTC 0 Overscan success
[   197.768] Not using RMX
[   197.768] scaler 0 setup success
[   197.768] Set CRTC 0 Source success
[   198.142] Output UNIPHY0 transmitter setup success
[   198.142] Output DIG0 encoder setup success
[   198.142] Output UNIPHY0 transmitter setup success
[   198.690] Output UNIPHY0 transmitter setup success
[   198.690] Output UNIPHY0 transmitter setup success
[   198.690] Enable CRTC 0 success
[   198.690] Enable CRTC memreq 0 success
[   198.690] Unblank CRTC 0 success
[   198.690] Output UNIPHY1 transmitter setup success
[   198.690] Output CRT1 disable success
[   198.690] Blank CRTC 1 success
[   198.690] Disable CRTC memreq 1 success
[   198.690] Disable CRTC 1 success
[   198.690] Blank CRTC 2 success
[   198.690] Disable CRTC memreq 2 success
[   198.690] Disable CRTC 2 success
[   198.690] Blank CRTC 3 success
[   198.690] Disable CRTC memreq 3 success
[   198.690] Disable CRTC 3 success
[   198.690] Blank CRTC 4 success
[   198.691] Disable CRTC memreq 4 success
[   198.691] Disable CRTC 4 success
[   198.691] Blank CRTC 5 success
[   198.691] Disable CRTC memreq 5 success
[   198.691] Disable CRTC 5 success
[   198.691] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   198.691] (--) RandR disabled
[   198.691] (II) Initializing built-in extension Generic Event Extension
[   198.691] (II) Initializing built-in extension SHAPE
[   198.691] (II) Initializing built-in extension MIT-SHM
[   198.691] (II) Initializing built-in extension XInputExtension
[   198.691] (II) Initializing built-in extension XTEST
[   198.692] (II) Initializing built-in extension BIG-REQUESTS
[   198.692] (II) Initializing built-in extension SYNC
[   198.692] (II) Initializing built-in extension XKEYBOARD
[   198.692] (II) Initializing built-in extension XC-MISC
[   198.692] (II) Initializing built-in extension SECURITY
[   198.692] (II) Initializing built-in extension XINERAMA
[   198.692] (II) Initializing built-in extension XFIXES
[   198.692] (II) Initializing built-in extension RENDER
[   198.692] (II) Initializing built-in extension RANDR
[   198.692] (II) Initializing built-in extension COMPOSITE
[   198.692] (II) Initializing built-in extension DAMAGE
[   198.692] (II) SELinux: Disabled on system
[   198.698] (EE) GLX error: Can not get required symbols.
[   198.711] (II) RADEON(0): Setting screen physical size to 361 x 203
[   199.256] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   199.256] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   199.256] (II) LoadModule: "evdev"
[   199.256] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   199.267] (II) Module evdev: vendor="X.Org Foundation"
[   199.267]     compiled for 1.12.1, module version = 2.7.0
[   199.267]     Module class: X.Org XInput Driver
[   199.267]     ABI class: X.Org XInput driver, version 16.0
[   199.267] (II) Using input driver 'evdev' for 'Power Button'
[   199.267] (**) Power Button: always reports core events
[   199.267] (**) evdev: Power Button: Device: "/dev/input/event5"
[   199.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[   199.268] (--) evdev: Power Button: Found keys
[   199.268] (II) evdev: Power Button: Configuring as keyboard
[   199.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[   199.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   199.268] (**) Option "xkb_rules" "evdev"
[   199.268] (**) Option "xkb_model" "pc105"
[   199.268] (**) Option "xkb_layout" "hr"
[   199.548] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[   199.548] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   199.548] (II) Using input driver 'evdev' for 'Video Bus'
[   199.548] (**) Video Bus: always reports core events
[   199.548] (**) evdev: Video Bus: Device: "/dev/input/event7"
[   199.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   199.548] (--) evdev: Video Bus: Found keys
[   199.548] (II) evdev: Video Bus: Configuring as keyboard
[   199.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0b/LNXVIDEO:01/input/input7/event7"
[   199.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   199.548] (**) Option "xkb_rules" "evdev"
[   199.548] (**) Option "xkb_model" "pc105"
[   199.548] (**) Option "xkb_layout" "hr"
[   199.548] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[   199.549] (II) No input driver specified, ignoring this device.
[   199.549] (II) This device may have been added with another device file.
[   199.549] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   199.549] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   199.549] (II) Using input driver 'evdev' for 'Sleep Button'
[   199.549] (**) Sleep Button: always reports core events
[   199.549] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[   199.549] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   199.549] (--) evdev: Sleep Button: Found keys
[   199.549] (II) evdev: Sleep Button: Configuring as keyboard
[   199.549] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[   199.549] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   199.549] (**) Option "xkb_rules" "evdev"
[   199.549] (**) Option "xkb_model" "pc105"
[   199.549] (**) Option "xkb_layout" "hr"
[   199.549] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event15)
[   199.549] (II) No input driver specified, ignoring this device.
[   199.549] (II) This device may have been added with another device file.
[   199.550] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[   199.550] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   199.550] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   199.550] (**) Logitech USB Receiver: always reports core events
[   199.550] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[   199.550] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   199.550] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   199.550] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   199.550] (--) evdev: Logitech USB Receiver: Found relative axes
[   199.550] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   199.550] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   199.550] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   199.550] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   199.550] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   199.550] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input1/event1"
[   199.550] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[   199.550] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   199.550] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   199.550] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   199.550] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   199.550] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   199.550] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   199.550] (II) No input driver specified, ignoring this device.
[   199.550] (II) This device may have been added with another device file.
[   199.551] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[   199.551] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   199.551] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   199.551] (**) Logitech USB Receiver: always reports core events
[   199.551] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[   199.551] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   199.551] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   199.551] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   199.551] (--) evdev: Logitech USB Receiver: Found relative axes
[   199.551] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   199.551] (--) evdev: Logitech USB Receiver: Found absolute axes
[   199.551] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   199.551] (--) evdev: Logitech USB Receiver: Found keys
[   199.551] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   199.551] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   199.551] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   199.551] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   199.551] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   199.551] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input2/event2"
[   199.551] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[   199.551] (**) Option "xkb_rules" "evdev"
[   199.551] (**) Option "xkb_model" "pc105"
[   199.551] (**) Option "xkb_layout" "hr"
[   199.551] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   199.551] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   199.551] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   199.551] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   199.551] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   199.551] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   199.551] (II) config/udev: Adding input device HP Webcam [2 MP Fixed] (/dev/input/event14)
[   199.551] (**) HP Webcam [2 MP Fixed]: Applying InputClass "evdev keyboard catchall"
[   199.551] (II) Using input driver 'evdev' for 'HP Webcam [2 MP Fixed]'
[   199.552] (**) HP Webcam [2 MP Fixed]: always reports core events
[   199.552] (**) evdev: HP Webcam [2 MP Fixed]: Device: "/dev/input/event14"
[   199.552] (--) evdev: HP Webcam [2 MP Fixed]: Vendor 0x4f2 Product 0xb1ac
[   199.552] (--) evdev: HP Webcam [2 MP Fixed]: Found keys
[   199.552] (II) evdev: HP Webcam [2 MP Fixed]: Configuring as keyboard
[   199.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input14/event14"
[   199.552] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Fixed]" (type: KEYBOARD, id 11)
[   199.552] (**) Option "xkb_rules" "evdev"
[   199.552] (**) Option "xkb_model" "pc105"
[   199.552] (**) Option "xkb_layout" "hr"
[   199.552] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[   199.552] (II) No input driver specified, ignoring this device.
[   199.552] (II) This device may have been added with another device file.
[   199.552] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[   199.552] (II) No input driver specified, ignoring this device.
[   199.552] (II) This device may have been added with another device file.
[   199.553] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[   199.553] (II) No input driver specified, ignoring this device.
[   199.553] (II) This device may have been added with another device file.
[   199.553] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   199.553] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   199.553] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   199.553] (**) AT Translated Set 2 keyboard: always reports core events
[   199.553] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   199.553] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   199.553] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   199.553] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   199.553] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   199.553] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   199.553] (**) Option "xkb_rules" "evdev"
[   199.553] (**) Option "xkb_model" "pc105"
[   199.553] (**) Option "xkb_layout" "hr"
[   199.554] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[   199.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   199.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   199.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   199.554] (II) LoadModule: "synaptics"
[   199.554] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   199.574] (II) Module synaptics: vendor="X.Org Foundation"
[   199.574]     compiled for 1.12.1.902, module version = 1.6.2
[   199.574]     Module class: X.Org XInput Driver
[   199.574]     ABI class: X.Org XInput driver, version 16.0
[   199.574] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   199.574] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   199.574] (**) Option "Device" "/dev/input/event10"
[   199.588] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   199.588] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5686
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4548
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   199.588] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[   199.588] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   199.588] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   199.592] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[   199.592] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   199.592] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   199.592] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   199.592] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[   199.593] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   199.593] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   199.593] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   199.593] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   199.593] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   199.594] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   199.594] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   199.595] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[   199.595] (II) No input driver specified, ignoring this device.
[   199.595] (II) This device may have been added with another device file.
[   199.595] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[   199.595] (II) No input driver specified, ignoring this device.
[   199.595] (II) This device may have been added with another device file.
[   199.596] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   199.596] (II) No input driver specified, ignoring this device.
[   199.596] (II) This device may have been added with another device file.
[   199.597] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[   199.597] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   199.597] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[   199.597] (**) HP WMI hotkeys: always reports core events
[   199.597] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event8"
[   199.597] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[   199.597] (--) evdev: HP WMI hotkeys: Found keys
[   199.597] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[   199.597] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[   199.597] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[   199.597] (**) Option "xkb_rules" "evdev"
[   199.597] (**) Option "xkb_model" "pc105"
[   199.597] (**) Option "xkb_layout" "hr"
[   210.297] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[   210.297] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[   210.297] (II) RADEON(0): Added native panel mode: 1366x768
[   210.301] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[   210.311] Dac detection success
[   210.311] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[   210.315] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[   210.315] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[   210.315] (II) RADEON(0): Added native panel mode: 1366x768
[   210.318] (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
[   210.328] Dac detection success
[   210.328] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0

Offline

#36 2012-07-02 09:23:59

wuxmedia
wookiee madclaw
From: Normal for Normandy
Registered: 2012-03-09
Posts: 835
Website

Re: The definitive guide to proprietary AMD graphics drivers

when you say 'not booting' you mean not getting to desktop, or login...?
i'm not much of an expert, but have you tried changing your boot parameters?

[   197.217] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=a5f4e4be-8d35-496f-9fbc-f289e9141990 ro quiet nomodeset radeon.modeset=0

maybe get rid of the modeset stuff. AFAIK if its working (my ATI 9200 is, after running SMXi) i dont recall needing any boot codes...
anyone?

Good Luck

Offline

#37 2012-07-02 09:42:02

Unia
#! Die Hard
From: The Netherlands
Registered: 2010-07-17
Posts: 3,102

Re: The definitive guide to proprietary AMD graphics drivers

Did you create an xorg.conf file? E.g. did you run aticonfig --initial?

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres
      Github || Deviantart

Offline

#38 2012-07-02 18:26:26

protacticus
Member
Registered: 2012-07-01
Posts: 24

Re: The definitive guide to proprietary AMD graphics drivers

Ican login, but I can not get desktop or slim window sad I tried with old boot parameters and  aticonfig --initial but no success still.

Offline

#39 2012-07-08 20:30:44

bklive
Member
From: About
Registered: 2011-04-21
Posts: 36
Website

Re: The definitive guide to proprietary AMD graphics drivers

I ended up installing fglrx-driver. For whatever reason smxi isn't working for me. I just get a washed out screen.

M$ free since 2003, Linux since '96

Offline

#40 2012-07-11 12:32:56

Ezprezo
Member
Registered: 2011-09-10
Posts: 33

Re: The definitive guide to proprietary AMD graphics drivers

Cartman wrote:

hey guys, I'm new to Crunchbang and when installing this driver using smxi I always get the error:

"Dkms part of installation failed"

So the driver actually is installed but there is no 3d acceleration and I cannot watch videos with vlc or xine. My Graphics Card is Mobility Radeon HD 4650 and Im using backports crunchbang x86.Help is very much appreciated.

I have this same unfortunate issue. headers is completely updated. Anyone have any recommendations? I could not use the current 12-6 install due to the fact that the Radeon HD 4650 is no longer supported. I had to install the 12-4 driver.

Offline

#41 2012-07-17 15:31:09

pvsage
Internal Affairs
From: North Carolina
Registered: 2009-10-18
Posts: 9,004

Re: The definitive guide to proprietary AMD graphics drivers

OK, I've finally taken the plunge and installed proprietary drivers (using "older fglrx", since smxi has dropped support for my Radeon HD4250).  Now...how do I take full advantage of the additional processing power?

while ( ! ( succeed = try() ) );
We've earned a reputation as a nice, friendly community; please help us keep it that way.

Offline

#42 2012-07-17 15:50:30

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,644

Re: The definitive guide to proprietary AMD graphics drivers

Enable Tear Free Desktop, maybe up the 3D stuff. But it pretty much takes care of itself.

Offline

#43 2012-07-17 15:53:31

pvsage
Internal Affairs
From: North Carolina
Registered: 2009-10-18
Posts: 9,004

Re: The definitive guide to proprietary AMD graphics drivers

So there aren't like 82 cores in the GPU that can be pressed into service for non-graphics applications like there are on Nvidia cards?

while ( ! ( succeed = try() ) );
We've earned a reputation as a nice, friendly community; please help us keep it that way.

Offline

#44 2012-07-17 16:40:42

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,644

Re: The definitive guide to proprietary AMD graphics drivers

Hell no, the 4250 is worse than your average Intel GPU.

Offline

#45 2012-07-17 17:34:34

pvsage
Internal Affairs
From: North Carolina
Registered: 2009-10-18
Posts: 9,004

Re: The definitive guide to proprietary AMD graphics drivers

/goodbye proprietary drivers then. tongue

while ( ! ( succeed = try() ) );
We've earned a reputation as a nice, friendly community; please help us keep it that way.

Offline

#46 2012-08-02 01:04:23

onionskin
New Member
Registered: 2011-11-26
Posts: 6

Re: The definitive guide to proprietary AMD graphics drivers

@beadmaze and others with unsupported boards:
I used el_koraco's modified manual method using smxi to clean up the system but then grabbed the 12.6 LEGACY driver from AMD's website and ran it manually. 
This worked for my Lenovo x100e w/ HD3200 gpu.  I had to pretty up the tty's by fiddling with /etc/default/grub (I think El_K's guide is pretty much what I did):

GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset radeon.modeset=0"

and set the resolution manually:

GRUB_GFXMODE=1366x768  #my native resolution#
GRUB_GFXPAYLOAD_LINUX=keep

It has goofed up the login screen a bit sending the login off center and the login box shows.  But my lappie runs cooler, the fan seldom runs.  That has gained me around an hour on battery life... pushing 3.5 hrs.  I'm back to where I was on Statler (now on SId + Linux 3.2.0-3-amd64).
Hope this helps.

Offline

#47 2012-08-11 18:26:12

dizzie
#! IRC Mod
From: /usr/local/bin/irc/mod
Registered: 2010-01-25
Posts: 92
Website

Re: The definitive guide to proprietary AMD graphics drivers

Anyone got fglrx working on Wheezy?

what i mean is this!! So far so good, i can somewhat install a driver, but the fun stops quick, as my fans on my 6850 runs at 100% tongue

According to the link above, they dont really seems to keen on fixing it smile

So 1. Debian stable (older #! based on stable) or 2. (not gonna mention distro) where newest fglrx and xorg 1.2-4 works just fine. I really want to run #! to be honest. If i was deaf i wouldnt care, but... DAMN THAT NOISE! lol

CPU : FX-6100 @ 4.0 GHz -.- RAM: Vengeance 8Gb DDR3/1600
GFX: GeForce 660 Ti -.- PSU: Corsair TX 650 + Corsair H80i
CASE: Corsair Carbide 500R -.- HDD: 120Gb Intel SSD
NAS: 6Tb (Raid5 ftw!) <-- Thats 6 x 2Tb WD Blacks smile

Offline

#48 2012-08-11 18:27:43

el_koraco
#!/loony/bun
From: inside Ed
Registered: 2011-07-25
Posts: 4,644

Re: The definitive guide to proprietary AMD graphics drivers

dizziedk wrote:

Anyone got fglrx working on Wheezy?

Install the newest driver from AMD. It does support Xorg 1.12.

Offline

#49 2012-08-18 22:42:26

Serket
New Member
Registered: 2012-08-18
Posts: 4

Re: The definitive guide to proprietary AMD graphics drivers

Well, I follow the steps of "el_koraco" but after reboot I have a black screen.

Offline

Help fund CrunchBang, donate to the project!

#50 2012-09-12 19:53:02

rdias
New Member
Registered: 2012-09-12
Posts: 1

Re: The definitive guide to proprietary AMD graphics drivers

el_koraco thanks, it works for me! lol

my resolution it's so better now, sorry my english!

Offline

Pages: 1 2 3 4

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo