CrunchBang Linux

MrHoggsy

New Member

Registered: 2012-05-02

Posts: 4

[SOLVED]uvcvideo failed to initialize the device

Hi

Hope this is the right place for this sorry if its not,
I have been running stable without any issue's so I thought I would give testing a go and have run into one problem, When booting I get the error "uvcvideo failed to initialize the device -5" which holds up the boot  for about 2 minutes before its killed and the boot process completes.

I think this error is to do with the motion eye webcam on my old sony vaio but anyway is there away to stop uvcvideo running on boot or even better a fix for the issue?

I have looked into drivers but can only find one for the older kernel which seemed to cause more problems than they solved.

Cheers

Last edited by MrHoggsy (2012-05-04 09:00:55)

xaos52

The Good Doctor

From: Planet of the @s

Registered: 2011-06-24

Posts: 4,290

Re: [SOLVED]uvcvideo failed to initialize the device

Post output of

dmesg

please - and put the info between [ code ] tags.

Last edited by xaos52 (2012-05-03 09:38:06)

---

bootinfoscript - emacs primer - I ♥ #!

falldown

#! Samurai

Registered: 2011-09-01

Posts: 1,471

Re: [SOLVED]uvcvideo failed to initialize the device

I think this error is to do with the motion eye webcam on my old sony vaio but anyway is there away to stop uvcvideo running on boot or even better a fix for the issue.

You are right MrHoggsy.
My Sony Vaio has the same issue with The Motion Eye webcam.
It has to do with the sonypi driver. (which also controls the volume and video playback keys)
I will try and find some more info for you on this.

EDIT
Which kernel are you currently using?

Last edited by falldown (2012-05-03 18:59:31)

---

Peachy's v9000 / Conky PitStop / My DA Page / VSIDO
Make it so....

MrHoggsy

New Member

Registered: 2012-05-02

Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

sorry for the delay in replying , work always gets in the way of fun

the output of dmesg is

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP Sun Apr 15 17:56:31 UTC 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
[    0.000000]  BIOS-e820: 000000007feb0000 - 000000007fecb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fecb000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-SZ61WN_C/VAIO                            , BIOS R0091S5 08/27/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7700] f7700
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36c72000 - 37631000
[    0.000000] ACPI: RSDP 000f76d0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7febe3ec 00094 (v01   Sony     VAIO 20070827 PTL  00000000)
[    0.000000] ACPI: FACP 7fec7bd2 000F4 (v03   Sony     VAIO 20070827 PTL  00000001)
[    0.000000] ACPI: DSDT 7fec041a 07744 (v02   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: FACS 7fecafc0 00040
[    0.000000] ACPI: APIC 7fec7cc6 00068 (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: HPET 7fec7d2e 00038 (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: MCFG 7fec7d66 0003C (v01   Sony     VAIO 20070827 PTL  0000005A)
[    0.000000] ACPI: TCPA 7fec7da2 00032 (v01   Sony     VAIO 20070827 PTL  00005A52)
[    0.000000] ACPI: TMOR 7fec7dd4 00026 (v01   Sony     VAIO 20070827 PTL  00000003)
[    0.000000] ACPI: SLIC 7fec7dfa 00176 (v01   Sony     VAIO 20070827 PTL  01000000)
[    0.000000] ACPI: APIC 7fec7f70 00068 (v01   Sony     VAIO 20070827 PTL  00000000)
[    0.000000] ACPI: BOOT 7fec7fd8 00028 (v01   Sony     VAIO 20070827 PTL  00000001)
[    0.000000] ACPI: SSDT 7febfd59 006C1 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febf64b 0070E (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febea0c 0025F (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febe966 000A6 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: SSDT 7febe480 004E6 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1156MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0007feb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007feb0
[    0.000000] On node 0 totalpages: 523839
[    0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f5c72200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2314 pages used for memmap
[    0.000000]   HighMem zone: 293800 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f5a00000 s33024 r0 d24320 u1048576
[    0.000000] pcpu-alloc: s33024 r0 d24320 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519745
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=6c51cf76-4fb2-41a7-ab36-45629dcb953a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007feb0)
[    0.000000] Memory: 2062788k/2095808k available (2841k kernel code, 32568k reserved, 1372k data, 412k init, 1184456k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141e000 - 0xc1485000   ( 412 kB)
[    0.000000]       .data : 0xc12c65ac - 0xc141d600   (1372 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c65ac   (2841 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2195.174 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.34 BogoMIPS (lpj=8780696)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004106] Security Framework initialized
[    0.004118] AppArmor: AppArmor disabled by boot time parameter
[    0.004159] Mount-cache hash table entries: 512
[    0.004441] Initializing cgroup subsys cpuacct
[    0.004455] Initializing cgroup subsys memory
[    0.004474] Initializing cgroup subsys devices
[    0.004480] Initializing cgroup subsys freezer
[    0.004485] Initializing cgroup subsys net_cls
[    0.004491] Initializing cgroup subsys blkio
[    0.004505] Initializing cgroup subsys perf_event
[    0.004575] CPU: Physical Processor ID: 0
[    0.004580] CPU: Processor Core ID: 0
[    0.004587] mce: CPU supports 6 MCE banks
[    0.004604] CPU0: Thermal monitoring enabled (TM2)
[    0.004612] using mwait in idle threads.
[    0.005641] ACPI: Core revision 20110623
[    0.020110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020709] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062006] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.064003] PEBS disabled due to CPU errata.
[    0.064003] ... version:                2
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[    0.064003] Booting Node   0, Processors  #1 Ok.
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.156063] NMI watchdog enabled, takes one hw-pmu counter.
[    0.156134] Brought up 2 CPUs
[    0.156141] Total of 2 processors activated (8779.38 BogoMIPS).
[    0.160170] devtmpfs: initialized
[    0.160375] PM: Registering ACPI NVS region at 7feb0000 (110592 bytes)
[    0.160478] print_constraints: dummy: 
[    0.160611] NET: Registered protocol family 16
[    0.160849] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160856] ACPI: bus type pci registered
[    0.161037] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.161045] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.161051] PCI: Using MMCONFIG for extended config space
[    0.161056] PCI: Using configuration type 1 for base access
[    0.164452] bio: create slab <bio-0> at 0
[    0.164452] ACPI: Added _OSI(Module Device)
[    0.164452] ACPI: Added _OSI(Processor Device)
[    0.164452] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164452] ACPI: Added _OSI(Processor Aggregator Device)
[    0.168244] ACPI: EC: Look up EC in DSDT
[    0.174855] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.176856] ACPI: SSDT 7febf309 0027A (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.177649] ACPI: Dynamic OEM Table Load:
[    0.177658] ACPI: SSDT   (null) 0027A (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.178027] ACPI: SSDT 7febec6b 00619 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.180304] ACPI: Dynamic OEM Table Load:
[    0.180313] ACPI: SSDT   (null) 00619 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.180957] ACPI: SSDT 7febf583 000C8 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.181727] ACPI: Dynamic OEM Table Load:
[    0.181735] ACPI: SSDT   (null) 000C8 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.181991] ACPI: SSDT 7febf284 00085 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.182737] ACPI: Dynamic OEM Table Load:
[    0.182745] ACPI: SSDT   (null) 00085 (v01   Sony     VAIO 20070827 PTL  20050624)
[    0.183415] ACPI: Interpreter enabled
[    0.183447] ACPI: (supports S0 S3 S4 S5)
[    0.183497] ACPI: Using IOAPIC for interrupt routing
[    0.216765] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.226037] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.226044] HEST: Table not found.
[    0.226058] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.228312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.230081] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.230090] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.230099] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.230107] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.230115] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.230122] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.230130] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.230139] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.230147] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.230155] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[    0.230181] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[    0.230304] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[    0.230421] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.230431] pci 0000:00:01.0: PME# disabled
[    0.230587] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[    0.230779] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.230920] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[    0.231111] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.231296] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[    0.231375] pci 0000:00:1a.7: reg 10: [mem 0xfc304000-0xfc3043ff]
[    0.231731] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.231747] pci 0000:00:1a.7: PME# disabled
[    0.231847] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[    0.231922] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
[    0.232281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.232297] pci 0000:00:1b.0: PME# disabled
[    0.232392] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[    0.232763] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.232778] pci 0000:00:1c.0: PME# disabled
[    0.232885] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[    0.233249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.233264] pci 0000:00:1c.1: PME# disabled
[    0.233364] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[    0.233733] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.233748] pci 0000:00:1c.2: PME# disabled
[    0.233855] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[    0.234223] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.234238] pci 0000:00:1c.3: PME# disabled
[    0.234343] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[    0.234532] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.234670] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[    0.234861] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.234998] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[    0.235185] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.235368] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[    0.235448] pci 0000:00:1d.7: reg 10: [mem 0xfc304400-0xfc3047ff]
[    0.235804] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.235819] pci 0000:00:1d.7: PME# disabled
[    0.235893] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.236217] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[    0.236507] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.236524] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.236542] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f)
[    0.236699] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[    0.236754] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.236794] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.236834] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.236873] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.236913] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.237071] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
[    0.237138] pci 0000:00:1f.2: reg 10: [io  0x18f8-0x18ff]
[    0.237176] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.237215] pci 0000:00:1f.2: reg 18: [io  0x18f0-0x18f7]
[    0.237253] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.237292] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ef]
[    0.237331] pci 0000:00:1f.2: reg 24: [io  0x18d0-0x18df]
[    0.237478] pci 0000:00:1f.2: PME# supported from D3hot
[    0.237493] pci 0000:00:1f.2: PME# disabled
[    0.237541] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[    0.237596] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.237739] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.237977] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
[    0.238010] pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
[    0.238045] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.238080] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
[    0.238105] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.238129] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.244043] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.244054] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.244064] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.244077] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.244276] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.244291] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.244307] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.244333] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.244653] pci 0000:06:00.0: [8086:4222] type 0 class 0x000280
[    0.244724] pci 0000:06:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
[    0.245226] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.245245] pci 0000:06:00.0: PME# disabled
[    0.252114] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    0.252126] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.252138] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.252155] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.252544] pci 0000:07:00.0: [11ab:4363] type 0 class 0x000200
[    0.252749] pci 0000:07:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit]
[    0.252856] pci 0000:07:00.0: reg 18: [io  0x5000-0x50ff]
[    0.253224] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.253797] pci 0000:07:00.0: supports D1 D2
[    0.253804] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.253838] pci 0000:07:00.0: PME# disabled
[    0.260117] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.260133] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.260149] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.260175] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.260377] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[    0.260393] pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
[    0.260409] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc5ffffff]
[    0.260435] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.260597] pci 0000:09:04.0: [104c:8039] type 2 class 0x000607
[    0.260671] pci 0000:09:04.0: reg 10: [mem 0xfc004000-0xfc004fff]
[    0.260791] pci 0000:09:04.0: supports D1 D2
[    0.260797] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.260813] pci 0000:09:04.0: PME# disabled
[    0.260882] pci 0000:09:04.1: [104c:803a] type 0 class 0x000c00
[    0.260952] pci 0000:09:04.1: reg 10: [mem 0xfc006000-0xfc0067ff]
[    0.260993] pci 0000:09:04.1: reg 14: [mem 0xfc000000-0xfc003fff]
[    0.261287] pci 0000:09:04.1: supports D1 D2
[    0.261293] pci 0000:09:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261309] pci 0000:09:04.1: PME# disabled
[    0.261372] pci 0000:09:04.2: [104c:803b] type 0 class 0x000180
[    0.261442] pci 0000:09:04.2: reg 10: [mem 0xfc005000-0xfc005fff]
[    0.261764] pci 0000:09:04.2: supports D1 D2
[    0.261771] pci 0000:09:04.2: PME# supported from D0 D1 D2 D3hot
[    0.261787] pci 0000:09:04.2: PME# disabled
[    0.261971] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[    0.261997] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.262023] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.262031] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.262178] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[    0.262296] pci_bus 0000:00: on NUMA node 0
[    0.262305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.262899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.263074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.263295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.263443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.263591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.263806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.264202]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.264392]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[    0.264398] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.280675] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.280815] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.280952] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281221] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281353] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281488] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.281622] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.281846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.281846] vgaarb: loaded
[    0.281846] vgaarb: bridge control possible 0000:01:00.0
[    0.281846] PCI: Using ACPI for IRQ routing
[    0.318258] PCI: pci_cache_line_size set to 64 bytes
[    0.318664] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.318672] reserve RAM buffer: 000000007feb0000 - 000000007fffffff 
[    0.318933] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.318951] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.318964] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.324188] Switching to clocksource hpet
[    0.328541] pnp: PnP ACPI init
[    0.328577] ACPI: bus type pnp registered
[    0.329454] pnp 00:00: [bus 00-ff]
[    0.329463] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.329470] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.329477] pnp 00:00: [io  0x0d00-0xffff window]
[    0.329484] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.329491] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.329498] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.329505] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.329511] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.329518] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.329525] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.329532] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.329543] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.329549] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.329556] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.329563] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.329570] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.329577] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.329584] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.329591] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.329598] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.329746] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.329995] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.330003] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.330009] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.330015] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.330021] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.330027] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.330034] pnp 00:01: [mem 0xfed40000-0xfed3ffff disabled]
[    0.330040] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.330183] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.330192] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.330201] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.330209] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.330218] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.330226] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.330235] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.330243] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334905] pnp 00:02: Plug and Play ACPI device, IDs SNY6001 (disabled)
[    0.334945] pnp 00:03: [io  0x0000-0x001f]
[    0.334951] pnp 00:03: [io  0x0081-0x0091]
[    0.334957] pnp 00:03: [io  0x0093-0x009f]
[    0.334963] pnp 00:03: [io  0x00c0-0x00df]
[    0.334969] pnp 00:03: [dma 4]
[    0.335089] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.335115] pnp 00:04: [mem 0xff000000-0xffffffff]
[    0.335237] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.335419] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.335543] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.335574] pnp 00:06: [io  0x00f0]
[    0.335594] pnp 00:06: [irq 13]
[    0.335717] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.335748] pnp 00:07: [io  0x002e-0x002f]
[    0.335754] pnp 00:07: [io  0x004e-0x004f]
[    0.335760] pnp 00:07: [io  0x0061]
[    0.335766] pnp 00:07: [io  0x0063]
[    0.335771] pnp 00:07: [io  0x0065]
[    0.335777] pnp 00:07: [io  0x0067]
[    0.335782] pnp 00:07: [io  0x0080]
[    0.335788] pnp 00:07: [io  0x0092]
[    0.335793] pnp 00:07: [io  0x00b2-0x00b3]
[    0.335800] pnp 00:07: [io  0x0680-0x069f]
[    0.335805] pnp 00:07: [io  0x0800-0x080f]
[    0.335812] pnp 00:07: [io  0x1000-0x107f]
[    0.335817] pnp 00:07: [io  0x1180-0x11bf]
[    0.335823] pnp 00:07: [io  0x1640-0x164f]
[    0.335829] pnp 00:07: [io  0xfe00]
[    0.336079] system 00:07: [io  0x0680-0x069f] has been reserved
[    0.336088] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.336097] system 00:07: [io  0x1000-0x107f] has been reserved
[    0.336105] system 00:07: [io  0x1180-0x11bf] has been reserved
[    0.336116] system 00:07: [io  0x1640-0x164f] has been reserved
[    0.336124] system 00:07: [io  0xfe00] has been reserved
[    0.336133] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336161] pnp 00:08: [io  0x0070-0x0077]
[    0.336175] pnp 00:08: [irq 8]
[    0.336304] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.336396] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[    0.336403] pnp 00:09: [io  0x167e-0x167f]
[    0.336409] pnp 00:09: [io  0x1670-0x167b]
[    0.336422] pnp 00:09: [irq 3]
[    0.336434] pnp 00:09: [irq 5]
[    0.336445] pnp 00:09: [irq 7]
[    0.336451] pnp 00:09: IRQ 9 override to level, high
[    0.336457] pnp 00:09: [irq 9]
[    0.336469] pnp 00:09: [irq 10]
[    0.336480] pnp 00:09: [irq 11]
[    0.336486] pnp 00:09: [irq 13]
[    0.336621] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.336649] pnp 00:0a: [io  0x0060]
[    0.336655] pnp 00:0a: [io  0x0064]
[    0.336668] pnp 00:0a: [irq 1]
[    0.336794] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.336828] pnp 00:0b: [irq 12]
[    0.336956] pnp 00:0b: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.340900] pnp: PnP ACPI: found 12 devices
[    0.340906] ACPI: ACPI bus type pnp unregistered
[    0.340915] PnPBIOS: Disabled by ACPI PNP
[    0.382256] PCI: max bus depth: 2 pci_try_num: 3
[    0.382448] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff]
[    0.382468] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff] (PCI address [0x80000000-0x800000ff])
[    0.382480] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.382493] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.382503] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.382511] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.382519] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.382531] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.382541] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.382554] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.382564] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.382585] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.382602] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.382628] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    0.382639] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.382659] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.382676] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.382704] pci 0000:07:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.382711] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.382722] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.382743] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.382759] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.382785] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[    0.382796] pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
[    0.382816] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc5ffffff]
[    0.382833] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.382866] pci 0000:09:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.382875] pci 0000:09:04.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.382883] pci 0000:09:04.0: BAR 14: assigned [io  0x7000-0x70ff]
[    0.382891] pci 0000:09:04.0: BAR 13: assigned [io  0x7400-0x74ff]
[    0.382898] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[    0.382905] pci 0000:09:04.0:   bridge window [io  0x7400-0x74ff]
[    0.382918] pci 0000:09:04.0:   bridge window [io  0x7000-0x70ff]
[    0.382935] pci 0000:09:04.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.382951] pci 0000:09:04.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.382967] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.382977] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.382998] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.383014] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.383063] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.383073] pci 0000:00:01.0: setting latency timer to 64
[    0.383093] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.383109] pci 0000:00:1c.0: setting latency timer to 64
[    0.383140] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.383156] pci 0000:00:1c.1: setting latency timer to 64
[    0.383187] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.383203] pci 0000:00:1c.2: setting latency timer to 64
[    0.383233] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.383248] pci 0000:00:1c.3: setting latency timer to 64
[    0.383274] pci 0000:00:1e.0: setting latency timer to 64
[    0.383306] pci 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.383325] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.383332] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.383339] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.383346] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[    0.383354] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.383361] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.383368] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.383375] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.383383] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.383389] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.383396] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.383404] pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
[    0.383410] pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.383418] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.383425] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.383431] pci_bus 0000:08: resource 1 [mem 0xc4000000-0xc5ffffff]
[    0.383439] pci_bus 0000:08: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.383446] pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
[    0.383452] pci_bus 0000:09: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.383459] pci_bus 0000:09: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.383466] pci_bus 0000:09: resource 4 [io  0x0000-0xffff]
[    0.383473] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[    0.383480] pci_bus 0000:0a: resource 0 [io  0x7400-0x74ff]
[    0.383487] pci_bus 0000:0a: resource 1 [io  0x7000-0x70ff]
[    0.383494] pci_bus 0000:0a: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.383501] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[    0.383631] NET: Registered protocol family 2
[    0.383781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.384375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.385199] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.385584] TCP: Hash tables configured (established 131072 bind 65536)
[    0.385590] TCP reno registered
[    0.385597] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.385615] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.385791] NET: Registered protocol family 1
[    0.385840] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.385888] pci 0000:00:1a.0: PCI INT A disabled
[    0.385910] pci 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.385954] pci 0000:00:1a.1: PCI INT B disabled
[    0.385980] pci 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    0.386046] pci 0000:00:1a.7: PCI INT C disabled
[    0.386119] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.386164] pci 0000:00:1d.0: PCI INT A disabled
[    0.386184] pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.386230] pci 0000:00:1d.1: PCI INT B disabled
[    0.386252] pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    0.386296] pci 0000:00:1d.2: PCI INT C disabled
[    0.386322] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.386370] pci 0000:00:1d.7: PCI INT D disabled
[    0.386446] pci 0000:01:00.0: Boot video device
[    0.386547] PCI: CLS 64 bytes, default 64
[    0.386666] Unpacking initramfs...
[    1.113141] Freeing initrd memory: 9980k freed
[    1.122475] Simple Boot Flag at 0x36 set to 0x1
[    1.123576] audit: initializing netlink socket (disabled)
[    1.123606] type=2000 audit(1336072300.116:1): initialized
[    1.182086] highmem bounce pool size: 64 pages
[    1.182098] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.195018] VFS: Disk quotas dquot_6.5.2
[    1.195116] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.195293] msgmni has been set to 1734
[    1.195723] alg: No test for stdrng (krng)
[    1.195801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.195810] io scheduler noop registered
[    1.195815] io scheduler deadline registered
[    1.195853] io scheduler cfq registered (default)
[    1.196108] pcieport 0000:00:01.0: setting latency timer to 64
[    1.196190] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.196334] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.196516] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.196768] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.196948] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.197199] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.197379] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    1.197633] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.197815] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    1.198125] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.198200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.198206] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.198739] acpiphp: Slot [1] registered
[    1.199243] acpiphp: Slot [4] registered
[    1.199694] intel_idle: MWAIT substates: 0x22220
[    1.199700] intel_idle: does not run on family 6 model 15
[    1.199769] ERST: Table is not found!
[    1.199773] GHES: HEST is not enabled!
[    1.199807] isapnp: Scanning for PnP cards...
[    1.558255] isapnp: No Plug & Play device found
[    1.558421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.564992] Linux agpgart interface v0.103
[    1.565895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.567837] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.567854] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.568245] mousedev: PS/2 mouse device common for all mice
[    1.568382] rtc_cmos 00:08: RTC can wake from S4
[    1.568657] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.568723] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.568749] cpuidle: using governor ladder
[    1.568754] cpuidle: using governor menu
[    1.569269] TCP cubic registered
[    1.569379] NET: Registered protocol family 10
[    1.570660] Mobile IPv6
[    1.570668] NET: Registered protocol family 17
[    1.570678] Registering the dns_resolver key type
[    1.570716] Using IPI No-Shortcut mode
[    1.571053] PM: Hibernation image not present or could not be loaded.
[    1.571075] registered taskstats version 1
[    1.578827] rtc_cmos 00:08: setting system clock to 2012-05-03 19:11:41 UTC (1336072301)
[    1.578968] Initializing network drop monitor service
[    1.579212] Freeing unused kernel memory: 412k freed
[    1.579577] Write protecting the kernel text: 2844k
[    1.579676] Write protecting the kernel read-only data: 1112k
[    1.579681] NX-protecting the kernel data: 3300k
[    1.596125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.615899] udevd[49]: starting version 175
[    1.691881] sky2: driver version 1.30
[    1.691988] sky2 0000:07:00.0: power state changed by ACPI to D0
[    1.696969] usbcore: registered new interface driver usbfs
[    1.697035] usbcore: registered new interface driver hub
[    1.708127] usbcore: registered new device driver usb
[    1.709162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.709229] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    1.709279] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.709290] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.709347] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.709426] ehci_hcd 0000:00:1a.7: debug port 1
[    1.713341] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.729322] sky2 0000:07:00.0: power state changed by ACPI to D0
[    1.729391] sky2 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.729479] sky2 0000:07:00.0: setting latency timer to 64
[    1.729627] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
[    1.730306] sky2 0000:07:00.0: irq 45 for MSI/MSI-X
[    1.731152] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc304000
[    1.732172] sky2 0000:07:00.0: eth0: addr 00:1a:80:59:e7:4c
[    1.744851] uhci_hcd: USB Universal Host Controller Interface driver
[    1.752252] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.752345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.752353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.752360] usb usb1: Product: EHCI Host Controller
[    1.752366] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[    1.752372] usb usb1: SerialNumber: 0000:00:1a.7
[    1.753061] hub 1-0:1.0: USB hub found
[    1.753076] hub 1-0:1.0: 4 ports detected
[    1.753330] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.753364] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.753375] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.753399] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.753468] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[    1.753562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.753569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.753576] usb usb2: Product: UHCI Host Controller
[    1.753582] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.753588] usb usb2: SerialNumber: 0000:00:1a.0
[    1.753858] hub 2-0:1.0: USB hub found
[    1.753872] hub 2-0:1.0: 2 ports detected
[    1.754065] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.754092] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.754103] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.754121] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    1.754184] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[    1.754273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.754281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754288] usb usb3: Product: UHCI Host Controller
[    1.754293] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.754300] usb usb3: SerialNumber: 0000:00:1a.1
[    1.754578] hub 3-0:1.0: USB hub found
[    1.754589] hub 3-0:1.0: 2 ports detected
[    1.754792] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.754820] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.754830] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.754855] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.754949] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.755038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.755046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755052] usb usb4: Product: UHCI Host Controller
[    1.755058] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.755064] usb usb4: SerialNumber: 0000:00:1d.0
[    1.755335] hub 4-0:1.0: USB hub found
[    1.755347] hub 4-0:1.0: 2 ports detected
[    1.755549] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    1.755575] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.755585] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.755604] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.755668] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001860
[    1.755758] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.755766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755772] usb usb5: Product: UHCI Host Controller
[    1.755778] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.755785] usb usb5: SerialNumber: 0000:00:1d.1
[    1.756093] hub 5-0:1.0: USB hub found
[    1.756105] hub 5-0:1.0: 2 ports detected
[    1.756300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    1.756328] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.756343] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.756622] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.756688] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001880
[    1.756771] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.756779] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.756786] usb usb6: Product: UHCI Host Controller
[    1.756792] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[    1.756798] usb usb6: SerialNumber: 0000:00:1d.2
[    1.757082] hub 6-0:1.0: USB hub found
[    1.757093] hub 6-0:1.0: 2 ports detected
[    1.757851] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.757899] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.757910] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.757932] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    1.758006] ehci_hcd 0000:00:1d.7: debug port 1
[    1.761926] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.772982] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304400
[    1.779235] thermal LNXTHERM:00: registered as thermal_zone0
[    1.779243] ACPI: Thermal Zone [ATF0] (28 C)
[    1.780494] thermal LNXTHERM:01: registered as thermal_zone1
[    1.780502] ACPI: Thermal Zone [DTS0] (23 C)
[    1.781713] thermal LNXTHERM:02: registered as thermal_zone2
[    1.781720] ACPI: Thermal Zone [DTS1] (24 C)
[    1.796054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.796119] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.796128] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.796135] usb usb7: Product: EHCI Host Controller
[    1.796140] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[    1.796147] usb usb7: SerialNumber: 0000:00:1d.7
[    1.796453] hub 7-0:1.0: USB hub found
[    1.796466] hub 7-0:1.0: 6 ports detected
[    1.849705] firewire_ohci 0000:09:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.850491] SCSI subsystem initialized
[    1.859068] libata version 3.00 loaded.
[    1.859895] ata_piix 0000:00:1f.1: version 2.13
[    1.859938] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.860067] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.863586] scsi0 : ata_piix
[    1.863807] scsi1 : ata_piix
[    1.864977] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.864986] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.865041] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.865058] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.904164] firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.020119] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.021013] scsi2 : ata_piix
[    2.021179] scsi3 : ata_piix
[    2.023105] ata3: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 22
[    2.023125] ata4: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 22
[    2.034827] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.90, max UDMA/33
[    2.048505] ata1.00: configured for UDMA/33
[    2.051004] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-852S  1.90 PQ: 0 ANSI: 5
[    2.120050] Refined TSC clocksource calibration: 2194.499 MHz.
[    2.120061] Switching to clocksource tsc
[    2.176029] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    2.311367] usb 1-2: New USB device found, idVendor=05ca, idProduct=183a
[    2.311376] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.404206] firewire_core: created device fw0: GUID 080046030296763b, S400
[    2.552050] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.726561] usb 2-1: New USB device found, idVendor=147e, idProduct=2016
[    2.726569] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.726576] usb 2-1: Product: Fingerprint Sensor   
[    2.726581] usb 2-1: Manufacturer: TouchStrip        
[    2.816204] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.816244] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.824462] ata3.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133
[    2.824470] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.840462] ata3.00: configured for UDMA/133
[    2.840709] scsi 2:0:0:0: Direct-Access     ATA      ST91608220AS     3.AL PQ: 0 ANSI: 5
[    3.120022] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    3.330775] usb 6-1: New USB device found, idVendor=044e, idProduct=300d
[    3.330784] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.330791] usb 6-1: Product: UGX
[    3.330796] usb 6-1: Manufacturer: ALPS
[    3.330801] usb 6-1: SerialNumber: 0106e73d
[    3.368029] ata4.01: failed to resume link (SControl 0)
[    3.381818] ata4.00: SATA link down (SStatus 0 SControl 300)
[    3.381866] ata4.01: SATA link down (SStatus 0 SControl 0)
[    3.395198] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.395206] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.395501] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.396200] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.396335] sd 2:0:0:0: [sda] Write Protect is off
[    3.396343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.396402] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.427434]  sda: sda1 sda2 < sda5 sda6 >
[    3.428355] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.140766] PM: Starting manual resume from disk
[    4.140775] PM: Hibernation image partition 8:5 present
[    4.140780] PM: Looking for hibernation image.
[    4.141128] PM: Image not found (code -22)
[    4.141134] PM: Hibernation image not present or could not be loaded.
[    4.180342] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.720821] udevd[287]: starting version 175
[    6.210789] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
[    6.211294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input1
[    6.211310] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[    6.222350] Monitor-Mwait will be used to enter C-1 state
[    6.222408] Monitor-Mwait will be used to enter C-2 state
[    6.222459] Monitor-Mwait will be used to enter C-3 state
[    6.222472] Marking TSC unstable due to TSC halts in idle
[    6.222503] ACPI: acpi_idle registered with cpuidle
[    6.223550] Switching to clocksource hpet
[    6.291277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    6.291294] ACPI: Power Button [PWRB]
[    6.291450] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.293682] ACPI: Lid Switch [LID0]
[    6.363793] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:9008]
[    6.363849] yenta_cardbus 0000:09:04.0: Enabling burst memory read transactions
[    6.363865] yenta_cardbus 0000:09:04.0: Using CSCINT to route CSC interrupts to PCI
[    6.363872] yenta_cardbus 0000:09:04.0: Routing CardBus interrupts to PCI
[    6.363890] yenta_cardbus 0000:09:04.0: TI: mfunc 0x01a21b22, devctl 0x64
[    6.373582] ACPI: AC Adapter [ACAD] (off-line)
[    6.405142] ACPI: Battery Slot [BAT1] (battery present)
[    6.561100] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.596965] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[    6.596977] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[    6.596987] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[    6.597011] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[    6.597019] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff
[    6.601780] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[    6.602172]  0x7400-0x74ff
[    6.609156] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
[    6.609166] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfc0fffff: excluding 0xfc000000-0xfc00ffff
[    6.609208] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[    6.609216] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[    6.846481] iTCO_vendor_support: vendor-support=0
[    6.854604] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    6.854618] ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[    6.854630] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.972805] sony_laptop: Sony Programmable IO Control Driver v0.6
[    6.972852] sony_laptop: detected Type3 model
[    6.975075] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input5
[    6.975311] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[    6.975548] sony_laptop: device allocated minor is 58
[    6.983491] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.983687] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.985315] sony_laptop: Sony Notebook Control Driver v0.6
[    7.001272] cfg80211: Calling CRDA to update world regulatory domain
[    7.010332] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    7.010351] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    7.010375] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    7.010546] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.010639] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.161007] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.161315] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.170487] tifm_7xx1 0000:09:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    7.243837] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[    7.247635] [drm] Initialized drm 1.1.0 20060810
[    7.265064] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[    7.272179] tpm_tis 00:09: Adjusting TPM timeout parameters.
[    7.301736] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    7.301744] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    7.301883] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[    7.301899] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[    7.301927] iwl3945 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.301948] iwl3945 0000:06:00.0: setting latency timer to 64
[    7.358141] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    7.358149] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    7.358335] iwl3945 0000:06:00.0: irq 47 for MSI/MSI-X
[    7.358627] Registered led device: phy0-led
[    7.388835] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    7.432606] Bluetooth: Core ver 2.16
[    7.432648] NET: Registered protocol family 31
[    7.432654] Bluetooth: HCI device and connection manager initialized
[    7.432662] Bluetooth: HCI socket layer initialized
[    7.432667] Bluetooth: L2CAP socket layer initialized
[    7.433082] Bluetooth: SCO socket layer initialized
[    7.465866] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.466642] usbcore: registered new interface driver btusb
[    7.640869] Linux media interface: v0.10
[    7.659431] Linux video capture interface: v2.00
[    7.673639] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183a)
[    7.674370] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[    7.674618] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[    7.674722] uvcvideo: Failed to initialize the device (-5).
[    7.674993] usbcore: registered new interface driver uvcvideo
[    7.674998] USB Video Class driver (1.1.1)
[    7.687498] wmi: Mapper loaded
[    7.985080] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.985095] nouveau 0000:01:00.0: setting latency timer to 64
[    7.989017] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086700a2)
[    8.001369] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    8.061640] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    8.061653] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    8.061660] [drm] nouveau 0000:01:00.0: Bios version 60.86.57.00
[    8.061669] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    8.061676] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    8.061684] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010103f3 00010015
[    8.061691] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02001300 00000028
[    8.061698] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02402312 00020010
[    8.061705] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[    8.061713] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[    8.061721] [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[    8.061730] [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[    8.061738] [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
[    8.061747] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC551
[    8.084868] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8C8
[    8.101618] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD31D
[    8.101636] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD40F
[    8.102725] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD609
[    8.102731] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD66E
[    8.122587] [drm] nouveau 0000:01:00.0: 0xD66E: Condition still not met after 20ms, skipping following opcodes
[    8.122612] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (70600kHz pixel clock)
[    8.141860] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    8.141875] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100%
[    8.141889] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100%
[    8.141902] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 600MHz timing 2 voltage 1150mV fanspeed 100%
[    8.141931] [drm] nouveau 0000:01:00.0: c: core 400MHz shader 800MHz memory 601MHz
[    8.148288] [TTM] Zone  kernel: Available graphics memory: 444362 kiB.
[    8.148296] [TTM] Zone highmem: Available graphics memory: 1036590 kiB.
[    8.148301] [TTM] Initializing pool allocator.
[    8.148327] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[    8.152879] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    8.239920] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.239927] [drm] No driver support for vblank timestamp query.
[    8.297930] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x310000, bo f70d1800
[    8.298135] fbcon: nouveaufb (fb0) is primary device
[    8.372077] cfg80211: World regulatory domain updated:
[    8.372084] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.372092] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.372100] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.372106] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.372113] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.372119] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.342652] Console: switching to colour frame buffer device 160x50
[    9.344105] fb0: nouveaufb frame buffer device
[    9.344110] drm: registered panic notifier
[    9.344123] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   68.289440] Adding 4188156k swap on /dev/sda5.  Priority:-1 extents:1 across:4188156k 
[   68.298896] EXT4-fs (sda1): re-mounted. Opts: (null)
[   68.547885] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   68.664100] loop: module loaded
[   69.777685] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   72.281128] Bluetooth: RFCOMM TTY layer initialized
[   72.281140] Bluetooth: RFCOMM socket layer initialized
[   72.281146] Bluetooth: RFCOMM ver 1.11
[   72.341244] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   72.341252] Bluetooth: BNEP filters: protocol multicast
[   72.423730] lp: driver loaded but no devices found
[   72.431083] ppdev: user-space parallel port driver
[   74.945099] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   75.018648] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   75.029601] sky2 0000:07:00.0: eth0: enabling interface
[   75.030130] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   83.452585] wlan0: authenticate with 00:22:3f:b2:43:a0 (try 1)
[   83.454390] wlan0: authenticated
[   83.458188] wlan0: associate with 00:22:3f:b2:43:a0 (try 1)
[   83.460853] wlan0: RX AssocResp from 00:22:3f:b2:43:a0 (capab=0x411 status=0 aid=4)
[   83.460862] wlan0: associated
[   83.466268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   94.232143] wlan0: no IPv6 routers present

EDIT
Which kernel are you currently using?

3.2.0-2-686-pae

cheers for the help

falldown

#! Samurai

Registered: 2011-09-01

Posts: 1,471

Re: [SOLVED]uvcvideo failed to initialize the device

MrHoggsy

First off Thank you for bringing up an issue that I had totally forgotten about.

This worked for me I am using the 3.2 bpo kernel and also worked with my 2.6 kernel.
First install the needed packages:

sudo apt-get install libglib2.0-dev libusb-dev build-essential gcc automake mercurial

Now you need to get the required software:

hg clone http://bitbucket.org/ahixon/r5u87x/

Change to newly downloaded directory :

cd r5u87x

Make the script:

make

and:

sudo make install

Reboot:
Now if all went well you can open your VLC player.. go to Media/Video Capture Device and click play.
Hopefully you will now be looking at yourself.

---

Peachy's v9000 / Conky PitStop / My DA Page / VSIDO
Make it so....

xaos52

The Good Doctor

From: Planet of the @s

Registered: 2011-06-24

Posts: 4,290

Re: [SOLVED]uvcvideo failed to initialize the device

Try instructions in this thread: https://lists.ubuntu.com/archives/kerne … 28364.html

---

bootinfoscript - emacs primer - I ♥ #!

MrHoggsy

New Member

Registered: 2012-05-02

Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

Thanks for the help I now have a working Webcam

xaos52

The Good Doctor

From: Planet of the @s

Registered: 2011-06-24

Posts: 4,290

Re: [SOLVED]uvcvideo failed to initialize the device

Nice.
Have fun with it.

PS: Oh, and mark the thread as [SOLVED]

Last edited by xaos52 (2012-05-04 08:47:02)

---

bootinfoscript - emacs primer - I ♥ #!

poutinator

New Member

Registered: 2012-11-12

Posts: 4

Re: [SOLVED]uvcvideo failed to initialize the device

worked fine for me too (on ubuntu 11.10), thanks a lot.