Keyboard Inconsistency at Boot?

cJones · 2012-02-28 00:29:29

So this has happened twice now, and am not sure what triggers it but...sometimes when I boot up my laptop and after #! has loaded, at the login screen my keyboard isn't registered or something as I can not type. If I reboot it is fine but am curious as to why this has happened twice

VastOne · 2012-02-28 00:31:21

It will not type anything at all?

If you drop to tty1 can you type there?

cJones · 2012-02-28 00:39:40

VastOne wrote:

It will not type anything at all?
If you drop to tty1 can you type there?

Correct...letters, number, symbols, arrows, anything. Sorry but I am unaware of what tty1 is...and also, sense it does not happen everytime I boot, it will probably be hard to test that. (I've had #! for two weeks, and its only happened twice)

VastOne · 2012-02-28 00:42:12

OK, the next time it does happen, hit ctrl + alt + F1 .... That will drop you to tty1 and a terminal. See if you have any keyboard functions from there...

Good luck

cJones · 2012-02-28 00:43:50

VastOne wrote:

OK, the next time it does happen, hit ctrl + alt + F1 .... That will drop you to tty1 and a terminal. See if you have any keyboard functions from there...
Good luck

Perfect, I will try that if it happens again...thank you

Last edited by cJones (2012-02-28 00:44:33)

VastOne · 2012-02-28 00:45:57

Sure

Just so you know ctrl + alt + f1 through f6 are different and can be used.. ctrl + alt + f7 gets you back to the desktop

cJones · 2012-02-28 00:49:01

VastOne wrote:

Sure
Just so you know ctrl + alt + f1 through f6 are different and can be used.. ctrl + alt + f7 gets you back to the desktop

Thanks again...and as a heads up, what exactly is tty1?

VastOne · 2012-02-28 00:56:10

tty is a Unix command that prints to standard output the name of the terminal connected to standard input. The name of the program comes from teletypewriter, abbreviated "TTY".

cJones · 2012-03-23 08:29:17

So it happened again (haven't rebooted for a while)
@Vast, ctrl+alt+f1 did not work...I should've assumed that sense they are no different from the keys I use to log in haha

None of the keys work when this happens and the only thing I can do is use the touchpad...Anyways, any other ideas?

xaos52 · 2012-03-23 09:25:17

ARe you using a wireless keyboard perhaps?
Post output of

dmesg
cat /var/log/Xorg.0.log

Post between [ code ] brackets please. Those commands produce a lot of output.

cJones · 2012-03-24 06:01:19

Nope, just a laptop.
dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.1-amd64 (Debian 3.2.4-1~bpo60+1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sat Feb 11 08:41:32 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.1-amd64 root=UUID=e85d24a7-f3ca-4420-ac28-93d626fe96a7 ro quiet splash nomodeset radeon.modeset=0
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bba7c000 (usable)
[    0.000000]  BIOS-e820: 00000000bba7c000 - 00000000bba82000 (reserved)
[    0.000000]  BIOS-e820: 00000000bba82000 - 00000000bbbed000 (usable)
[    0.000000]  BIOS-e820: 00000000bbbed000 - 00000000bbc0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bbc0f000 - 00000000bbc6f000 (usable)
[    0.000000]  BIOS-e820: 00000000bbc6f000 - 00000000bbc70000 (reserved)
[    0.000000]  BIOS-e820: 00000000bbc70000 - 00000000bbcf1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bbcf1000 - 00000000bbf0f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bbf0f000 - 00000000bbf18000 (usable)
[    0.000000]  BIOS-e820: 00000000bbf18000 - 00000000bbf1f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bbf1f000 - 00000000bbf82000 (usable)
[    0.000000]  BIOS-e820: 00000000bbf82000 - 00000000bbf9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bbf9f000 - 00000000bbfe0000 (usable)
[    0.000000]  BIOS-e820: 00000000bbfe0000 - 00000000bbfff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bbfff000 - 00000000bc000000 (usable)
[    0.000000]  BIOS-e820: 00000000bc000000 - 00000000be000000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8904000 - 00000000f8905000 (reserved)
[    0.000000]  BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO                           IdeaPad Y560    /KL3                             , BIOS 30CN59WW   06/30/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 0BC000000 mask FFE000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bc000000 - 00000000be000000 (usable) ==> (reserved)
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f6ab0] f6ab0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bc000000
[    0.000000]  0000000000 - 00bc000000 page 2M
[    0.000000] kernel direct mapping tables up to bc000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ bbfda000-bbfe0000
[    0.000000] RAMDISK: 37611000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f6970 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bbff1f58 0005C (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bbfe2000 000F4 (v03 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT 00000000bbfe3000 0CBDE (v02 LENOVO CB-01    06040000 INTL 20060912)
[    0.000000] ACPI: FACS 00000000bbf9bfc0 00040
[    0.000000] ACPI: HPET 00000000bbffed32 00038 (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG 00000000bbffed6a 0003C (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: APIC 00000000bbffeda6 000BC (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bbffee62 00028 (v01 LENOVO CB-01    06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bbffee8a 00176 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000bbfe1000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000bba7c
[    0.000000]     0: 0x000bba82 -> 0x000bbbed
[    0.000000]     0: 0x000bbc0f -> 0x000bbc6f
[    0.000000]     0: 0x000bbf0f -> 0x000bbf18
[    0.000000]     0: 0x000bbf1f -> 0x000bbf82
[    0.000000]     0: 0x000bbf9f -> 0x000bbfe0
[    0.000000]     0: 0x000bbfff -> 0x000bc000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1031297
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3919 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 750893 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bba7c000 - 00000000bba82000
[    0.000000] PM: Registered nosave memory: 00000000bbbed000 - 00000000bbc0f000
[    0.000000] PM: Registered nosave memory: 00000000bbc6f000 - 00000000bbc70000
[    0.000000] PM: Registered nosave memory: 00000000bbc70000 - 00000000bbcf1000
[    0.000000] PM: Registered nosave memory: 00000000bbcf1000 - 00000000bbf0f000
[    0.000000] PM: Registered nosave memory: 00000000bbf18000 - 00000000bbf1f000
[    0.000000] PM: Registered nosave memory: 00000000bbf82000 - 00000000bbf9f000
[    0.000000] PM: Registered nosave memory: 00000000bbfe0000 - 00000000bbfff000
[    0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000be000000
[    0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000bf800000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8904000
[    0.000000] PM: Registered nosave memory: 00000000f8904000 - 00000000f8905000
[    0.000000] PM: Registered nosave memory: 00000000f8905000 - 00000000feaff000
[    0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013372
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.1-amd64 root=UUID=e85d24a7-f3ca-4420-ac28-93d626fe96a7 ro quiet splash nomodeset radeon.modeset=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3982220k/5242880k available (3476k kernel code, 1117692k absent, 142968k reserved, 3256k data, 608k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1596.030 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.06 BogoMIPS (lpj=6384120)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000103] Security Framework initialized
[    0.000107] AppArmor: AppArmor disabled by boot time parameter
[    0.000916] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003172] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004179] Mount-cache hash table entries: 256
[    0.004441] Initializing cgroup subsys cpuacct
[    0.004447] Initializing cgroup subsys memory
[    0.004476] Initializing cgroup subsys devices
[    0.004479] Initializing cgroup subsys freezer
[    0.004482] Initializing cgroup subsys net_cls
[    0.004484] Initializing cgroup subsys blkio
[    0.004550] CPU: Physical Processor ID: 0
[    0.004568] CPU: Processor Core ID: 0
[    0.004573] mce: CPU supports 9 MCE banks
[    0.004600] CPU0: Thermal monitoring enabled (TM1)
[    0.004609] using mwait in idle threads.
[    0.006879] ACPI: Core revision 20110623
[    0.036482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076703] CPU0: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz stepping 05
[    0.183533] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[    0.183541] ... version:                3
[    0.183543] ... bit width:              48
[    0.183561] ... generic registers:      4
[    0.183563] ... value mask:             0000ffffffffffff
[    0.183565] ... max period:             000000007fffffff
[    0.183567] ... fixed-purpose events:   3
[    0.183569] ... event mask:             000000070000000f
[    0.183953] NMI watchdog enabled, takes one hw-pmu counter.
[    0.184187] Booting Node   0, Processors  #1
[    0.184190] smpboot cpu 1: start_ip = 97000
[    0.271473] CPU1: Thermal monitoring handled by SMI
[    0.291651] NMI watchdog enabled, takes one hw-pmu counter.
[    0.291885]  #2
[    0.291887] smpboot cpu 2: start_ip = 97000
[    0.379358] CPU2: Thermal monitoring handled by SMI
[    0.399493] NMI watchdog enabled, takes one hw-pmu counter.
[    0.399743]  #3
[    0.399745] smpboot cpu 3: start_ip = 97000
[    0.487253] CPU3: Thermal monitoring handled by SMI
[    0.507454] NMI watchdog enabled, takes one hw-pmu counter.
[    0.507701]  #4
[    0.507703] smpboot cpu 4: start_ip = 97000
[    0.595148] CPU4: Thermal monitoring handled by SMI
[    0.615287] NMI watchdog enabled, takes one hw-pmu counter.
[    0.615544]  #5
[    0.615545] smpboot cpu 5: start_ip = 97000
[    0.703015] CPU5: Thermal monitoring handled by SMI
[    0.723155] NMI watchdog enabled, takes one hw-pmu counter.
[    0.723408]  #6
[    0.723409] smpboot cpu 6: start_ip = 97000
[    0.810912] CPU6: Thermal monitoring handled by SMI
[    0.831050] NMI watchdog enabled, takes one hw-pmu counter.
[    0.831279]  #7 Ok.
[    0.831298] smpboot cpu 7: start_ip = 97000
[    0.918785] CPU7: Thermal monitoring handled by SMI
[    0.938879] NMI watchdog enabled, takes one hw-pmu counter.
[    0.938945] Brought up 8 CPUs
[    0.938947] Total of 8 processors activated (25552.58 BogoMIPS).
[    0.947202] devtmpfs: initialized
[    0.957195] PM: Registering ACPI NVS region at bbc70000 (528384 bytes)
[    0.957259] PM: Registering ACPI NVS region at bbf82000 (118784 bytes)
[    0.957617] print_constraints: dummy: 
[    0.957775] NET: Registered protocol family 16
[    0.958000] ACPI: bus type pci registered
[    0.958201] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.958205] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    1.100564] PCI: Using configuration type 1 for base access
[    1.102414] bio: create slab <bio-0> at 0
[    1.102741] ACPI: Added _OSI(Module Device)
[    1.102761] ACPI: Added _OSI(Processor Device)
[    1.102765] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.102768] ACPI: Added _OSI(Processor Aggregator Device)
[    1.106951] ACPI: EC: Look up EC in DSDT
[    1.129286] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.130646] ACPI: SSDT 00000000bbf1aa98 002E8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    1.131681] ACPI: Dynamic OEM Table Load:
[    1.131684] ACPI: SSDT           (null) 002E8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    1.132168] ACPI: SSDT 00000000bbf19018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    1.133114] ACPI: Dynamic OEM Table Load:
[    1.133117] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    1.155427] ACPI: SSDT 00000000bbf1a718 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    1.156649] ACPI: Dynamic OEM Table Load:
[    1.156652] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    1.166926] ACPI: SSDT 00000000bbf18d98 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    1.167972] ACPI: Dynamic OEM Table Load:
[    1.167991] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    1.280206] ACPI: Interpreter enabled
[    1.280211] ACPI: (supports S0 S3 S4 S5)
[    1.280247] ACPI: Using IOAPIC for interrupt routing
[    1.297902] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.298206] ACPI: No dock devices found.
[    1.298208] HEST: Table not found.
[    1.298212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.298864] \_SB_.PCI0:_OSC invalid UUID
[    1.298866] _OSC request data:1 8 1f 
[    1.298871] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.299951] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.299955] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.299958] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.299961] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.299964] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.299967] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.299971] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    1.299987] pci 0000:00:00.0: [8086:d132] type 0 class 0x000600
[    1.300053] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[    1.300110] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    1.300115] pci 0000:00:03.0: PME# disabled
[    1.300142] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[    1.300209] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[    1.300275] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[    1.300338] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[    1.300405] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[    1.300456] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[    1.300542] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.300579] pci 0000:00:16.0: reg 10: [mem 0xf8905800-0xf890580f 64bit]
[    1.300678] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.300687] pci 0000:00:16.0: PME# disabled
[    1.300735] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.300766] pci 0000:00:1a.0: reg 10: [mem 0xf8906000-0xf89063ff]
[    1.300869] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.300878] pci 0000:00:1a.0: PME# disabled
[    1.300922] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.300943] pci 0000:00:1b.0: reg 10: [mem 0xf8900000-0xf8903fff 64bit]
[    1.301028] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.301037] pci 0000:00:1b.0: PME# disabled
[    1.301073] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.301156] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.301165] pci 0000:00:1c.0: PME# disabled
[    1.301202] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.301284] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.301293] pci 0000:00:1c.1: PME# disabled
[    1.301330] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    1.301413] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.301422] pci 0000:00:1c.2: PME# disabled
[    1.301459] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    1.301541] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.301550] pci 0000:00:1c.3: PME# disabled
[    1.301587] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    1.301670] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.301679] pci 0000:00:1c.4: PME# disabled
[    1.301723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.301754] pci 0000:00:1d.0: reg 10: [mem 0xf8906400-0xf89067ff]
[    1.301856] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.301865] pci 0000:00:1d.0: PME# disabled
[    1.301904] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.301998] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.302149] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.302178] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    1.302191] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    1.302204] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    1.302218] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    1.302231] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    1.302245] pci 0000:00:1f.2: reg 24: [mem 0xf8905000-0xf89057ff]
[    1.302303] pci 0000:00:1f.2: PME# supported from D3hot
[    1.302312] pci 0000:00:1f.2: PME# disabled
[    1.302349] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.302374] pci 0000:00:1f.3: reg 10: [mem 0xf8906800-0xf89068ff 64bit]
[    1.302401] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    1.302465] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.302498] pci 0000:00:1f.6: reg 10: [mem 0xf8904000-0xf8904fff 64bit]
[    1.302641] pci 0000:01:00.0: [1002:68c0] type 0 class 0x000300
[    1.302656] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.302669] pci 0000:01:00.0: reg 18: [mem 0xf8400000-0xf841ffff 64bit]
[    1.302678] pci 0000:01:00.0: reg 20: [io  0x2000-0x20ff]
[    1.302692] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.302727] pci 0000:01:00.0: supports D1 D2
[    1.302751] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[    1.302766] pci 0000:01:00.1: reg 10: [mem 0xf8420000-0xf8423fff 64bit]
[    1.302829] pci 0000:01:00.1: supports D1 D2
[    1.310994] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[    1.311002] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    1.311009] pci 0000:00:03.0:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.311018] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.311133] pci 0000:03:00.0: [197b:2387] type 0 class 0x000880
[    1.311157] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf80000ff]
[    1.311237] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    1.311362] pci 0000:03:00.2: [197b:2386] type 0 class 0x000805
[    1.311387] pci 0000:03:00.2: reg 10: [mem 0xf8100400-0xf81004ff]
[    1.311577] pci 0000:03:00.3: [197b:2388] type 0 class 0x000880
[    1.311602] pci 0000:03:00.3: reg 10: [mem 0xf8100800-0xf81008ff]
[    1.311792] pci 0000:03:00.4: [197b:2389] type 0 class 0x000880
[    1.311820] pci 0000:03:00.4: reg 10: [mem 0xf8100c00-0xf8100cff]
[    1.319034] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.319051] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.319069] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.319080] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.319206] pci 0000:05:00.0: [8086:0084] type 0 class 0x000280
[    1.319299] pci 0000:05:00.0: reg 10: [mem 0xf8500000-0xf8501fff 64bit]
[    1.319754] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    1.319769] pci 0000:05:00.0: PME# disabled
[    1.327030] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.327058] pci 0000:00:1c.1:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.327134] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[    1.327197] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    1.327206] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.327215] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.327226] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.327343] pci 0000:09:00.0: [14e4:1692] type 0 class 0x000200
[    1.327372] pci 0000:09:00.0: reg 10: [mem 0xf8600000-0xf860ffff 64bit]
[    1.327509] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    1.327519] pci 0000:09:00.0: PME# disabled
[    1.335057] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
[    1.335082] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    1.335168] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[    1.335184] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.335187] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.335190] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.335194] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.335197] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.335200] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.335204] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    1.335244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.335653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.335871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.336105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.336253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.336348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.336442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.336536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.336655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[    1.336822] \_SB_.PCI0:_OSC invalid UUID
[    1.336824] _OSC request data:1 1f 1f 
[    1.336828]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.336886] \_SB_.PCI0:_OSC invalid UUID
[    1.336888] _OSC request data:1 0 1d 
[    1.336892]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.336895] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.352365] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.352475] pci 0000:ff:00.0: [8086:2c52] type 0 class 0x000600
[    1.352501] pci 0000:ff:00.1: [8086:2c81] type 0 class 0x000600
[    1.352527] pci 0000:ff:02.0: [8086:2c90] type 0 class 0x000600
[    1.352550] pci 0000:ff:02.1: [8086:2c91] type 0 class 0x000600
[    1.352575] pci 0000:ff:03.0: [8086:2c98] type 0 class 0x000600
[    1.352599] pci 0000:ff:03.1: [8086:2c99] type 0 class 0x000600
[    1.352622] pci 0000:ff:03.4: [8086:2c9c] type 0 class 0x000600
[    1.352646] pci 0000:ff:04.0: [8086:2ca0] type 0 class 0x000600
[    1.352669] pci 0000:ff:04.1: [8086:2ca1] type 0 class 0x000600
[    1.352691] pci 0000:ff:04.2: [8086:2ca2] type 0 class 0x000600
[    1.352714] pci 0000:ff:04.3: [8086:2ca3] type 0 class 0x000600
[    1.352739] pci 0000:ff:05.0: [8086:2ca8] type 0 class 0x000600
[    1.352761] pci 0000:ff:05.1: [8086:2ca9] type 0 class 0x000600
[    1.352784] pci 0000:ff:05.2: [8086:2caa] type 0 class 0x000600
[    1.352806] pci 0000:ff:05.3: [8086:2cab] type 0 class 0x000600
[    1.352849]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.352853]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.352855] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.353645] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.353726] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.353806] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.353885] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.353966] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.354045] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.354124] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.354203] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.354343] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.354359] vgaarb: loaded
[    1.354360] vgaarb: bridge control possible 0000:01:00.0
[    1.354404] PCI: Using ACPI for IRQ routing
[    1.360993] PCI: pci_cache_line_size set to 64 bytes
[    1.361346] reserve RAM buffer: 000000000009c400 - 000000000009ffff 
[    1.361349] reserve RAM buffer: 00000000bba7c000 - 00000000bbffffff 
[    1.361356] reserve RAM buffer: 00000000bbbed000 - 00000000bbffffff 
[    1.361363] reserve RAM buffer: 00000000bbc6f000 - 00000000bbffffff 
[    1.361368] reserve RAM buffer: 00000000bbf18000 - 00000000bbffffff 
[    1.361373] reserve RAM buffer: 00000000bbf82000 - 00000000bbffffff 
[    1.361376] reserve RAM buffer: 00000000bbfe0000 - 00000000bbffffff 
[    1.361543] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    1.361556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    1.361564] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.366778] hpet: hpet2 irq 40 for MSI
[    1.366991] hpet: hpet3 irq 41 for MSI
[    1.370965] hpet: hpet4 irq 42 for MSI
[    1.375014] hpet: hpet5 irq 43 for MSI
[    1.378992] hpet: hpet6 irq 44 for MSI
[    1.390936] Switching to clocksource hpet
[    1.393034] pnp: PnP ACPI init
[    1.393050] ACPI: bus type pnp registered
[    1.393592] pnp 00:00: [bus 00-fe]
[    1.393595] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.393598] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.393600] pnp 00:00: [io  0x0d00-0xffff window]
[    1.393604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.393607] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.393610] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.393612] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.393615] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.393618] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.393621] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.393623] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.393626] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.393629] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.393632] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.393634] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.393637] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.393640] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.393647] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    1.393649] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.393724] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.393795] pnp 00:01: [io  0x0000-0x001f]
[    1.393798] pnp 00:01: [io  0x0081-0x0091]
[    1.393800] pnp 00:01: [io  0x0093-0x009f]
[    1.393803] pnp 00:01: [io  0x00c0-0x00df]
[    1.393805] pnp 00:01: [dma 4]
[    1.393840] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.393853] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.393887] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.394018] pnp 00:03: [irq 0 disabled]
[    1.394028] pnp 00:03: [irq 8]
[    1.394030] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.394067] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.394082] pnp 00:04: [io  0x00f0]
[    1.394088] pnp 00:04: [irq 13]
[    1.394123] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.394138] pnp 00:05: [io  0x002e-0x002f]
[    1.394141] pnp 00:05: [io  0x004e-0x004f]
[    1.394143] pnp 00:05: [io  0x0061]
[    1.394145] pnp 00:05: [io  0x0063]
[    1.394148] pnp 00:05: [io  0x0065]
[    1.394150] pnp 00:05: [io  0x0067]
[    1.394152] pnp 00:05: [io  0x0070]
[    1.394154] pnp 00:05: [io  0x0080]
[    1.394156] pnp 00:05: [io  0x0092]
[    1.394159] pnp 00:05: [io  0x00b2-0x00b3]
[    1.394161] pnp 00:05: [io  0x0680-0x069f]
[    1.394163] pnp 00:05: [io  0x0500-0x050f]
[    1.394166] pnp 00:05: [io  0x0600-0x0603]
[    1.394168] pnp 00:05: [io  0xffff]
[    1.394170] pnp 00:05: [io  0x0400-0x047f]
[    1.394173] pnp 00:05: [io  0x1180-0x11ff]
[    1.394175] pnp 00:05: [io  0x164e-0x164f]
[    1.394179] pnp 00:05: [io  0xfe00]
[    1.394181] pnp 00:05: [io  0x0068]
[    1.394183] pnp 00:05: [io  0x006c]
[    1.394185] pnp 00:05: [io  0x0700-0x070f]
[    1.394269] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.394272] system 00:05: [io  0x0500-0x050f] has been reserved
[    1.394276] system 00:05: [io  0x0600-0x0603] has been reserved
[    1.394279] system 00:05: [io  0xffff] has been reserved
[    1.394284] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.394288] system 00:05: [io  0x1180-0x11ff] has been reserved
[    1.394291] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.394294] system 00:05: [io  0xfe00] has been reserved
[    1.394298] system 00:05: [io  0x0700-0x070f] has been reserved
[    1.394302] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.394487] pnp 00:06: [io  0x06a0-0x06af]
[    1.394490] pnp 00:06: [io  0x06b0-0x06ff]
[    1.394565] system 00:06: [io  0x06a0-0x06af] has been reserved
[    1.394568] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    1.394572] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.394624] pnp 00:07: [io  0x0070-0x0077]
[    1.394662] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.394706] pnp 00:08: [io  0x0060]
[    1.394708] pnp 00:08: [io  0x0064]
[    1.394718] pnp 00:08: [irq 1]
[    1.394779] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.394845] pnp 00:09: [irq 12]
[    1.394899] pnp 00:09: Plug and Play ACPI device, IDs SYN1039 SYN1000 SYN0002 PNP0f13 (active)
[    1.395570] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.395574] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.395577] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
[    1.395580] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.395583] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.395586] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.395589] pnp 00:0a: [mem 0xc0000000-0xc0000fff]
[    1.395591] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.395594] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[    1.395597] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    1.395599] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.395602] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.395604] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.395715] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.395719] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    1.395723] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    1.395726] system 00:0a: [mem 0xc0000000-0xc0000fff] has been reserved
[    1.395730] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.395734] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.395737] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.395741] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    1.395745] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.395749] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.396007] pnp 00:0b: [bus ff]
[    1.396071] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.397746] pnp: PnP ACPI: found 12 devices
[    1.397749] ACPI: ACPI bus type pnp unregistered
[    1.405619] PCI: max bus depth: 1 pci_try_num: 2
[    1.405692] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[    1.405697] pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
[    1.405702] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0300000-0xc04fffff]
[    1.405707] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.405711] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    1.405716] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[    1.405721] pci 0000:00:1c.1: BAR 13: assigned [io  0x7000-0x7fff]
[    1.405725] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8440000-0xf845ffff pref]
[    1.405729] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[    1.405732] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    1.405737] pci 0000:00:03.0:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.405741] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.405748] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[    1.405751] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.405759] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.405769] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.405778] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.405790] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.405798] pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]
[    1.405808] pci 0000:00:1c.1:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.405817] pci 0000:00:1c.1:   bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[    1.405828] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[    1.405836] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    1.405846] pci 0000:00:1c.2:   bridge window [mem 0xc0300000-0xc04fffff]
[    1.405856] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.405867] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    1.405875] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.405885] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.405894] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.405905] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
[    1.405913] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    1.405924] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    1.405933] pci 0000:00:1c.4:   bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[    1.405944] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    1.405972] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.405977] pci 0000:00:03.0: setting latency timer to 64
[    1.405993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.406002] pci 0000:00:1c.0: setting latency timer to 64
[    1.406023] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.406028] pci 0000:00:1c.1: setting latency timer to 64
[    1.406048] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.406052] pci 0000:00:1c.2: setting latency timer to 64
[    1.406072] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.406077] pci 0000:00:1c.3: setting latency timer to 64
[    1.406092] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.406101] pci 0000:00:1c.4: setting latency timer to 64
[    1.406117] pci 0000:00:1e.0: setting latency timer to 64
[    1.406126] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.406129] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.406131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.406134] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.406137] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.406140] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.406142] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.406145] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.406148] pci_bus 0000:01: resource 1 [mem 0xf8400000-0xf84fffff]
[    1.406151] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.406154] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    1.406157] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf81fffff]
[    1.406160] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.406162] pci_bus 0000:05: resource 0 [io  0x7000-0x7fff]
[    1.406165] pci_bus 0000:05: resource 1 [mem 0xf8500000-0xf85fffff]
[    1.406168] pci_bus 0000:05: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[    1.406171] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    1.406174] pci_bus 0000:06: resource 1 [mem 0xc0300000-0xc04fffff]
[    1.406176] pci_bus 0000:06: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.406179] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    1.406182] pci_bus 0000:07: resource 1 [mem 0xf8200000-0xf83fffff]
[    1.406185] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.406188] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    1.406190] pci_bus 0000:09: resource 1 [mem 0xf8600000-0xf86fffff]
[    1.406193] pci_bus 0000:09: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[    1.406196] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    1.406199] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    1.406202] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    1.406204] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.406207] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.406210] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.406213] pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.406334] NET: Registered protocol family 2
[    1.406521] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.407706] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.411277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.411704] TCP: Hash tables configured (established 524288 bind 65536)
[    1.411706] TCP reno registered
[    1.411719] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.411767] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.411951] NET: Registered protocol family 1
[    1.412144] pci 0000:01:00.0: Boot video device
[    1.412245] PCI: CLS 64 bytes, default 64
[    1.412295] Unpacking initramfs...
[    1.718218] Freeing initrd memory: 10108k freed
[    1.719901] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.719906] Placing 64MB software IO TLB between ffff8800b7a7c000 - ffff8800bba7c000
[    1.719908] software IO TLB at phys 0xb7a7c000 - 0xbba7c000
[    1.719930] Simple Boot Flag at 0x36 set to 0x1
[    1.720901] audit: initializing netlink socket (disabled)
[    1.720912] type=2000 audit(1332535169.496:1): initialized
[    1.743053] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.753626] VFS: Disk quotas dquot_6.5.2
[    1.753673] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.753768] msgmni has been set to 7797
[    1.754023] alg: No test for stdrng (krng)
[    1.754072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.754075] io scheduler noop registered
[    1.754077] io scheduler deadline registered
[    1.754115] io scheduler cfq registered (default)
[    1.754639] intel_idle: MWAIT substates: 0x1120
[    1.754656] intel_idle: v0.4 model 0x1E
[    1.754658] intel_idle: lapic_timer_reliable_states 0x2
[    1.754752] ERST: Table is not found!
[    1.754754] GHES: HEST is not enabled!
[    1.754830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.942959] Linux agpgart interface v0.103
[    1.943142] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2P] at 0x60,0x64 irq 1,12
[    1.949661] i8042: Detected active multiplexing controller, rev 1.1
[    1.953031] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.953039] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.953074] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.953103] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.953131] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.953290] mousedev: PS/2 mouse device common for all mice
[    1.953348] rtc_cmos 00:07: RTC can wake from S4
[    1.953487] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.953527] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.953821] cpuidle: using governor ladder
[    1.954279] cpuidle: using governor menu
[    1.954511] TCP cubic registered
[    1.955084] NET: Registered protocol family 10
[    1.955786] Mobile IPv6
[    1.955788] NET: Registered protocol family 17
[    1.955791] Registering the dns_resolver key type
[    1.956090] PM: Hibernation image not present or could not be loaded.
[    1.956098] registered taskstats version 1
[    1.960828] rtc_cmos 00:07: setting system clock to 2012-03-23 20:39:30 UTC (1332535170)
[    1.960937] Initializing network drop monitor service
[    1.962187] Freeing unused kernel memory: 608k freed
[    1.962257] Write protecting the kernel read-only data: 6144k
[    1.964339] Freeing unused kernel memory: 600k freed
[    1.966961] Freeing unused kernel memory: 716k freed
[    1.993544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.995403] udev[79]: starting version 164
[    2.032719] sdhci: Secure Digital Host Controller Interface driver
[    2.032723] sdhci: Copyright(c) Pierre Ossman
[    2.032836] usbcore: registered new interface driver usbfs
[    2.032867] usbcore: registered new interface driver hub
[    2.033243] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2386] (rev 20)
[    2.033278] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.033316] sdhci-pci 0000:03:00.2: setting latency timer to 64
[    2.033352] mmc0: no vmmc regulator found
[    2.033408] Registered led device: mmc0::
[    2.034065] tg3.c:v3.121 (November 2, 2011)
[    2.034117] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.034131] tg3 0000:09:00.0: setting latency timer to 64
[    2.034197] usbcore: registered new device driver usb
[    2.034459] mmc0: SDHCI controller on PCI [0000:03:00.2] using DMA
[    2.034761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.034795] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.034839] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.034848] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.034886] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.034946] ehci_hcd 0000:00:1a.0: debug port 2
[    2.039030] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.039078] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf8906000
[    2.047206] SCSI subsystem initialized
[    2.047374] tg3 mdio bus: probed
[    2.051440] libata version 3.00 loaded.
[    2.054334] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.054363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.054372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.054378] usb usb1: Product: EHCI Host Controller
[    2.054382] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.1-amd64 ehci_hcd
[    2.054387] usb usb1: SerialNumber: 0000:00:1a.0
[    2.054695] hub 1-0:1.0: USB hub found
[    2.054703] hub 1-0:1.0: 3 ports detected
[    2.054850] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.054878] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.054885] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.054898] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.054940] ehci_hcd 0000:00:1d.0: debug port 2
[    2.059016] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.059040] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf8906400
[    2.068512] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:8b:89:a7
[    2.068517] tg3 0000:09:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=900:01)
[    2.068522] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.068525] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.074370] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.074412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.074419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.074424] usb usb2: Product: EHCI Host Controller
[    2.074429] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.1-amd64 ehci_hcd
[    2.074433] usb usb2: SerialNumber: 0000:00:1d.0
[    2.074704] hub 2-0:1.0: USB hub found
[    2.074713] hub 2-0:1.0: 3 ports detected
[    2.074867] ahci 0000:00:1f.2: version 3.0
[    2.074897] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.075068] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    2.075139] ahci: SSS flag set, parallel bus scan disabled
[    2.075207] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.075218] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    2.075229] ahci 0000:00:1f.2: setting latency timer to 64
[    2.079641] thermal LNXTHERM:00: registered as thermal_zone0
[    2.079644] ACPI: Thermal Zone [TZ00] (62 C)
[    2.099908] scsi0 : ahci
[    2.100485] scsi1 : ahci
[    2.100948] scsi2 : ahci
[    2.101227] scsi3 : ahci
[    2.101505] scsi4 : ahci
[    2.101783] scsi5 : ahci
[    2.102024] ata1: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905100 irq 45
[    2.102035] ata2: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905180 irq 45
[    2.102037] ata3: DUMMY
[    2.102038] ata4: DUMMY
[    2.102045] ata5: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905300 irq 45
[    2.102052] ata6: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905380 irq 45
[    2.366129] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.418198] ata1: SATA link down (SStatus 0 SControl 300)
[    2.498906] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.498914] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.499599] hub 1-1:1.0: USB hub found
[    2.499678] hub 1-1:1.0: 6 ports detected
[    2.610043] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.717776] Refined TSC clocksource calibration: 1595.989 MHz.
[    2.717784] Switching to clocksource tsc
[    2.737847] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.739028] ata2.00: ATA-8: HITACHI HTS725050A9A364, PC4ZC70F, max UDMA/100
[    2.739036] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.740436] ata2.00: configured for UDMA/100
[    2.740910] scsi 1:0:0:0: Direct-Access     ATA      HITACHI HTS72505 PC4Z PQ: 0 ANSI: 5
[    2.742105] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.742112] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.742547] hub 2-1:1.0: USB hub found
[    2.742736] hub 2-1:1.0: 8 ports detected
[    2.814097] usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
[    2.910823] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00d
[    2.910831] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.910836] usb 1-1.6: Product: Broadcom Bluetooth 2.1 Device
[    2.910841] usb 1-1.6: Manufacturer: Broadcom Corp
[    2.910845] usb 1-1.6: SerialNumber: F07BCBE35A82
[    3.013885] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[    3.061434] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.063281] ata5.00: ATAPI: Optiarc DVD RW AD-7700H, A816, max UDMA/100
[    3.070077] ata5.00: configured for UDMA/100
[    3.086296] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7700H  A816 PQ: 0 ANSI: 5
[    3.126874] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0190
[    3.126881] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.126886] usb 2-1.4: Product: Lenovo EasyCamera
[    3.126891] usb 2-1.4: Manufacturer: Bison Corp.
[    3.405162] ata6: SATA link down (SStatus 0 SControl 300)
[    3.411748] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.411936] sd 1:0:0:0: [sda] Write Protect is off
[    3.411940] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.411983] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.428714] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.428721] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.429088] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.445449]  sda: sda1 sda2 sda3 < sda5 > sda4
[    3.447252] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.450617] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.450751] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.982906] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    3.982909] EXT4-fs (sda5): write access will be enabled during recovery
[    5.241296] EXT4-fs (sda5): recovery complete
[    5.242201] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.649946] udev[391]: starting version 164
[    7.026184] Bluetooth: Core ver 2.16
[    7.026201] NET: Registered protocol family 31
[    7.026204] Bluetooth: HCI device and connection manager initialized
[    7.026207] Bluetooth: HCI socket layer initialized
[    7.026209] Bluetooth: L2CAP socket layer initialized
[    7.026215] Bluetooth: SCO socket layer initialized
[    7.162685] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    7.163079] ACPI: Lid Switch [LID]
[    7.163145] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    7.163151] ACPI: Power Button [PWRB]
[    7.163205] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    7.163209] ACPI: Sleep Button [SLPB]
[    7.163262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.163266] ACPI: Power Button [PWRF]
[    7.164214] ACPI: AC Adapter [ACAD] (on-line)
[    7.271532] cfg80211: Calling CRDA to update world regulatory domain
[    7.466664] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.469752] acpi device:03: registered as cooling_device8
[    7.469899] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[    7.470049] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    7.514960] EDAC MC: Ver: 2.1.0
[    7.571370] intel ips 0000:00:1f.6: Non-IPS CPU detected.
[    7.571373] intel ips 0000:00:1f.6: IPS not supported on this CPU
[    7.676816] ACPI: Battery Slot [BAT1] (battery present)
[    7.677038] wmi: Mapper loaded
[    7.704677] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.704690] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[    7.717538] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.717889] usbcore: registered new interface driver btusb
[    7.781280] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[    7.812759] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[    7.929193] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.929200] ACPI: resource 0000:00:1f.3 [io  0x1840-0x185f] conflicts with ACPI region SMBI [io 0x1840-0x184f]
[    7.929203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.070839] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    8.070842] Copyright(c) 2003-2011 Intel Corporation
[    8.070887] iwlwifi 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.070895] iwlwifi 0000:05:00.0: setting latency timer to 64
[    8.070918] iwlwifi 0000:05:00.0: pci_resource_len = 0x00002000
[    8.070921] iwlwifi 0000:05:00.0: pci_resource_base = ffffc90000658000
[    8.070924] iwlwifi 0000:05:00.0: HW Revision ID = 0x0
[    8.070993] iwlwifi 0000:05:00.0: irq 46 for MSI/MSI-X
[    8.071022] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    8.071073] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[    8.083313] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.083395] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    8.083432] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.090471] iwlwifi 0000:05:00.0: device EEPROM VER=0x15d, CALIB=0x6
[    8.090473] iwlwifi 0000:05:00.0: Device SKU: 0X50
[    8.090474] iwlwifi 0000:05:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[    8.090521] iwlwifi 0000:05:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[    8.098679] Linux media interface: v0.10
[    8.117559] Linux video capture interface: v2.00
[    8.119431] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190)
[    8.121555] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8
[    8.121653] usbcore: registered new interface driver uvcvideo
[    8.121657] USB Video Class driver (1.1.1)
[    8.200539] iwlwifi 0000:05:00.0: request for firmware file 'iwlwifi-1000-5.ucode' failed.
[    8.203415] iwlwifi 0000:05:00.0: request for firmware file 'iwlwifi-1000-4.ucode' failed.
[    8.301274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    8.304976] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.305171] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.305556] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.305699] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[    8.305738] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    8.325302] iwlwifi 0000:05:00.0: Firmware has old API version, expected v5 through v6, got v3.
[    8.325385] iwlwifi 0000:05:00.0: New firmware can be obtained from http://www.intellinuxwireless.org/.
[    8.325463] iwlwifi 0000:05:00.0: loaded firmware version 128.50.3.1 build 13488
[    8.325798] Registered led device: phy0-led
[    8.372573] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.375741] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    8.375888] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
[    8.416428] Disabling lock debugging due to kernel taint
[    8.416469] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.454366] [fglrx] Maximum main memory to use for locked dma buffers: 3739 MBytes.
[    8.454728] [fglrx]   vendor: 1002 device: 68c0 count: 1
[    8.455301] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[    8.455312] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.455316] pci 0000:01:00.0: setting latency timer to 64
[    8.455596] [fglrx] Kernel PAT support is enabled
[    8.455609] [fglrx] module loaded - fglrx 8.93.4 [Dec  5 2011] with 1 minors
[    8.629170] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input13
[    9.490958] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0400
[    9.536513] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[    9.819421] EXT4-fs (sda5): re-mounted. Opts: (null)
[    9.933046] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    9.997206] loop: module loaded
[   10.258844] fuse init (API version 7.17)
[   13.179935] CE: hpet increased min_delta_ns to 20113 nsec
[   13.274941] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   13.367923] CE: hpet increased min_delta_ns to 30169 nsec
[   13.368080] CE: hpet increased min_delta_ns to 45253 nsec
[   13.369609] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[   13.471596] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.473000] tg3 0000:09:00.0: irq 49 for MSI/MSI-X
[   13.505512] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.048119] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.048122] Bluetooth: BNEP filters: protocol multicast
[   14.060211] tg3 0000:09:00.0: eth0: Link is down
[   14.091875] Bridge firewalling registered
[   14.456778] Bluetooth: RFCOMM TTY layer initialized
[   14.456791] Bluetooth: RFCOMM socket layer initialized
[   14.456797] Bluetooth: RFCOMM ver 1.11
[   15.714701] lp: driver loaded but no devices found
[   15.839326] ppdev: user-space parallel port driver
[   17.009608] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[   17.010114] [fglrx] Firegl kernel thread PID: 1534
[   17.010415] [fglrx] Firegl kernel thread PID: 1535
[   17.010715] [fglrx] Firegl kernel thread PID: 1536
[   17.010949] [fglrx] IRQ 50 Enabled
[   17.216361] [fglrx] Gart USWC size:1220 M.
[   17.216363] [fglrx] Gart cacheable size:483 M.
[   17.216367] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   17.216369] [fglrx] Reserved FB block: Unshared offset:f92d000, size:3d3000 
[   17.216371] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
[   30.256766] wlan0: authenticate with 00:26:f3:db:ee:98 (try 1)
[   30.260010] wlan0: authenticated
[   30.260294] wlan0: associate with 00:26:f3:db:ee:98 (try 1)
[   30.270580] wlan0: RX AssocResp from 00:26:f3:db:ee:98 (capab=0xc11 status=0 aid=2)
[   30.270587] wlan0: associated
[   30.285980] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   31.291622] Intel AES-NI instructions are not detected.
[   33.582002] iwlwifi 0000:05:00.0: Tx aggregation enabled on ra = 00:26:f3:db:ee:98 tid = 0
[   40.693880] wlan0: no IPv6 routers present
[   72.849499] ACPI: EC: GPE storm detected, transactions will use polling mode
[  318.058690] iwlwifi 0000:05:00.0: Tx aggregation enabled on ra = 00:26:f3:db:ee:98 tid = 6
[  810.968395] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1207.485557] iwlwifi 0000:05:00.0: Tx aggregation enabled on ra = 00:26:f3:db:ee:98 tid = 1

cJones · 2012-03-24 06:02:28

and,
cat /var/log/Xorg.0.log:

[    14.854] 
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    14.854] X Protocol Version 11, Revision 0
[    14.854] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[    14.854] Current Operating System: Linux Carson-PC 3.2.0-0.bpo.1-amd64 #1 SMP Sat Feb 11 08:41:32 UTC 2012 x86_64
[    14.854] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.1-amd64 root=UUID=e85d24a7-f3ca-4420-ac28-93d626fe96a7 ro quiet splash nomodeset radeon.modeset=0
[    14.854] Build Date: 28 August 2011  09:39:43PM
[    14.854] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>) 
[    14.854] Current version of pixman: 0.24.0
[    14.854]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    14.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 20:39:43 2012
[    14.913] (==) Using config file: "/etc/X11/xorg.conf"
[    14.913] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.979] (==) ServerLayout "X.org Configured"
[    14.979] (**) |-->Screen "Screen0" (0)
[    14.979] (**) |   |-->Monitor "<default monitor>"
[    14.979] (**) |   |-->Device "Card0"
[    14.979] (==) No monitor specified for screen "Screen0".
    Using a default monitor configuration.
[    14.979] (**) |-->Input Device "Mouse0"
[    14.979] (**) |-->Input Device "Keyboard0"
[    14.979] (==) Automatically adding devices
[    14.979] (==) Automatically enabling devices
[    15.022] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.022]     Entry deleted from font path.
[    15.038] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.038]     Entry deleted from font path.
[    15.038] (**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    15.038] (**) ModulePath set to "/usr/lib/xorg/modules"
[    15.038] (**) Extension "Composite" is enabled
[    15.038] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.038] (WW) Disabling Mouse0
[    15.038] (WW) Disabling Keyboard0
[    15.038] (II) Loader magic: 0x7d3ae0
[    15.038] (II) Module ABI versions:
[    15.038]     X.Org ANSI C Emulation: 0.4
[    15.038]     X.Org Video Driver: 10.0
[    15.038]     X.Org XInput driver : 12.2
[    15.038]     X.Org Server Extension : 5.0
[    15.040] (--) PCI:*(0:1:0:0) 1002:68c0:17aa:3927 rev 0, Mem @ 0xd0000000/268435456, 0xf8400000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    15.040] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.040] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    15.040] (II) LoadModule: "record"
[    15.092] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.093] (II) Module record: vendor="X.Org Foundation"
[    15.093]     compiled for 1.10.4, module version = 1.13.0
[    15.093]     Module class: X.Org Server Extension
[    15.093]     ABI class: X.Org Server Extension, version 5.0
[    15.093] (II) Loading extension RECORD
[    15.093] (II) LoadModule: "dri"
[    15.093] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.149] (II) Module dri: vendor="X.Org Foundation"
[    15.149]     compiled for 1.10.4, module version = 1.0.0
[    15.149]     ABI class: X.Org Server Extension, version 5.0
[    15.149] (II) Loading extension XFree86-DRI
[    15.149] (II) LoadModule: "dbe"
[    15.149] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.150] (II) Module dbe: vendor="X.Org Foundation"
[    15.150]     compiled for 1.10.4, module version = 1.0.0
[    15.150]     Module class: X.Org Server Extension
[    15.150]     ABI class: X.Org Server Extension, version 5.0
[    15.150] (II) Loading extension DOUBLE-BUFFER
[    15.150] (II) LoadModule: "dri2"
[    15.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.151] (II) Module dri2: vendor="X.Org Foundation"
[    15.151]     compiled for 1.10.4, module version = 1.2.0
[    15.151]     ABI class: X.Org Server Extension, version 5.0
[    15.151] (II) Loading extension DRI2
[    15.151] (II) LoadModule: "glx"
[    15.151] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.268] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    15.269]     compiled for 6.9.0, module version = 1.0.0
[    15.269] (II) Loading extension GLX
[    15.269] (II) LoadModule: "extmod"
[    15.270] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.302] (II) Module extmod: vendor="X.Org Foundation"
[    15.302]     compiled for 1.10.4, module version = 1.0.0
[    15.302]     Module class: X.Org Server Extension
[    15.302]     ABI class: X.Org Server Extension, version 5.0
[    15.302] (II) Loading extension SELinux
[    15.302] (II) Loading extension MIT-SCREEN-SAVER
[    15.302] (II) Loading extension XFree86-VidModeExtension
[    15.302] (II) Loading extension DPMS
[    15.302] (II) Loading extension XVideo
[    15.302] (II) Loading extension XVideo-MotionCompensation
[    15.302] (II) Loading extension X-Resource
[    15.302] (II) LoadModule: "fglrx"
[    15.302] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    15.565] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    15.571]     compiled for 1.4.99.906, module version = 8.93.4
[    15.571]     Module class: X.Org Video Driver
[    15.571] (II) Loading sub module "fglrxdrm"
[    15.571] (II) LoadModule: "fglrxdrm"
[    15.572] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    15.595] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    15.595]     compiled for 1.4.99.906, module version = 8.93.4
[    15.595] (II) ATI Proprietary Linux Driver Version Identifier:8.93.4
[    15.595] (II) ATI Proprietary Linux Driver Release Identifier: 8.93                                 
[    15.595] (II) ATI Proprietary Linux Driver Build Date: Dec  5 2011 21:06:58
[    15.595] (++) using VT number 7

[    15.601] (WW) Falling back to old probe method for fglrx
[    15.703] (II) Loading PCS database from /etc/ati/amdpcsdb
[    15.721] (--) Chipset Supported AMD Graphics Processor (0x68C0) found
[    15.735] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    15.736] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    15.736] (II) AMD Video driver is signed
[    15.736] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    15.736] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    15.736] (II) fglrx(0): pEnt->device->identifier=0x801220
[    15.736] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[    15.736] (II) Loading sub module "vgahw"
[    15.736] (II) LoadModule: "vgahw"
[    15.737] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    15.752] (II) Module vgahw: vendor="X.Org Foundation"
[    15.752]     compiled for 1.10.4, module version = 0.1.0
[    15.752]     ABI class: X.Org Video Driver, version 10.0
[    15.752] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    15.752] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    15.752] (==) fglrx(0): Default visual is TrueColor
[    15.752] (==) fglrx(0): RGB weight 888
[    15.752] (II) fglrx(0): Using 8 bits per RGB 
[    15.752] (==) fglrx(0): Buffer Tiling is ON
[    15.753] (II) Loading sub module "fglrxdrm"
[    15.753] (II) LoadModule: "fglrxdrm"
[    15.753] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    15.753] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    15.753]     compiled for 1.4.99.906, module version = 8.93.4
[    15.772] ukiDynamicMajor: found major device number 251
[    15.772] ukiDynamicMajor: found major device number 251
[    15.772] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    15.772] ukiOpenDevice: node name is /dev/ati/card0
[    15.772] ukiOpenDevice: open result is 9, (OK)
[    15.772] ukiOpenByBusid: ukiOpenMinor returns 9
[    15.772] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    15.773] (==) fglrx(0): NoAccel = NO
[    15.773] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    15.773] (--) fglrx(0): Chipset: "AMD Radeon HD 6570M/5700 Series" (Chipset = 0x68c0)
[    15.773] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3927)
[    15.773] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    15.773] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    15.773] (--) fglrx(0): MMIO registers at 0xf8400000
[    15.773] (--) fglrx(0): I/O port at 0x00002000
[    15.773] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    15.785] (II) fglrx(0): AC Adapter is used
[    15.800] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    15.900] (II) Loading sub module "vbe"
[    15.900] (II) LoadModule: "vbe"
[    15.900] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    16.029] (II) Module vbe: vendor="X.Org Foundation"
[    16.029]     compiled for 1.10.4, module version = 1.1.0
[    16.029]     ABI class: X.Org Video Driver, version 10.0
[    16.030] (II) fglrx(0): VESA BIOS detected
[    16.030] (II) fglrx(0): VESA VBE Version 3.0
[    16.030] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    16.030] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    16.030] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    16.030] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    16.030] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    16.030] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    16.061] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    16.061] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    16.061] (II) fglrx(0): PCIE card detected
[    16.061] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    16.061] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    16.065] (II) fglrx(0): Using adapter: 1:0.0.
[    16.094] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    16.806] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[    16.806] (II) fglrx(0): RandR 1.2 support is enabled!
[    16.807] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    16.807] (==) fglrx(0): Center Mode is disabled 
[    16.807] (II) Loading sub module "fb"
[    16.807] (II) LoadModule: "fb"
[    16.807] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.828] (II) Module fb: vendor="X.Org Foundation"
[    16.828]     compiled for 1.10.4, module version = 1.0.0
[    16.828]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.828] (II) Loading sub module "ddc"
[    16.828] (II) LoadModule: "ddc"
[    16.828] (II) Module "ddc" already built-in
[    16.989] (II) fglrx(0): Finished Initialize PPLIB!
[    16.991] (II) fglrx(0): Output LVDS using monitor section 0-LVDS
[    16.991] (**) fglrx(0): Option "PreferredMode" "1366x768"
[    16.991] (**) fglrx(0): Option "Position" "0 0"
[    16.991] (**) fglrx(0): Option "Disable" "false"
[    16.991] (**) fglrx(0): Option "Rotate" "normal"
[    16.991] (**) fglrx(0): Option "TargetRefresh" "60"
[    16.991] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[    16.991] (**) fglrx(0): Option "PreferredMode" "1280x768"
[    16.991] (**) fglrx(0): Option "Position" "1366 0"
[    16.991] (**) fglrx(0): Option "Disable" "false"
[    16.991] (**) fglrx(0): Option "Rotate" "normal"
[    16.991] (**) fglrx(0): Option "TargetRefresh" "60"
[    16.991] (II) fglrx(0): Output CRT1 has no monitor section
[    16.991] (II) Loading sub module "ddc"
[    16.991] (II) LoadModule: "ddc"
[    16.991] (II) Module "ddc" already built-in
[    16.991] (II) fglrx(0): Connected Display0: LVDS
[    16.992] (II) fglrx(0): Display0 EDID data ---------------------------
[    16.992] (II) fglrx(0): Manufacturer: AUO  Model: 40ec  Serial#: 0
[    16.992] (II) fglrx(0): Year: 2009  Week: 0
[    16.992] (II) fglrx(0): EDID Version: 1.3
[    16.992] (II) fglrx(0): Digital Display Input
[    16.992] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    16.992] (II) fglrx(0): Gamma: 2.20
[    16.992] (II) fglrx(0): No DPMS capabilities specified
[    16.992] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.992] (II) fglrx(0): First detailed timing is preferred mode
[    16.992] (II) fglrx(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    16.992] (II) fglrx(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    16.992] (II) fglrx(0): Manufacturer's mask: 0
[    17.010] (II) fglrx(0): Supported detailed timing:
[    17.010] (II) fglrx(0): clock: 71.9 MHz   Image Size:  344 x 193 mm
[    17.010] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1536 h_border: 0
[    17.010] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 780 v_border: 0
[    17.010] (II) fglrx(0): Supported detailed timing:
[    17.010] (II) fglrx(0): clock: 47.9 MHz   Image Size:  344 x 193 mm
[    17.010] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1536 h_border: 0
[    17.010] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 780 v_border: 0
[    17.010] (II) fglrx(0):  AUO
[    17.010] (II) fglrx(0):  B156XW04 V0
[    17.010] (II) fglrx(0): EDID (in hex):
[    17.010] (II) fglrx(0):     00ffffffffffff0006afec4000000000
[    17.010] (II) fglrx(0):     00130103802213780ad7759355558d29
[    17.010] (II) fglrx(0):     24505400000001010101010101010101
[    17.010] (II) fglrx(0):     010101010101151c56aa50000c303020
[    17.010] (II) fglrx(0):     360058c110000018b91256aa50000c30
[    17.010] (II) fglrx(0):     3020360058c110000018000000fe0041
[    17.010] (II) fglrx(0):     554f0a202020202020202020000000fe
[    17.010] (II) fglrx(0):     004231353658573034205630200a0052
[    17.010] (II) fglrx(0): End of Display0 EDID data --------------------
[    17.011] (II) fglrx(0): EDID for output LVDS
[    17.011] (II) fglrx(0): Manufacturer: AUO  Model: 40ec  Serial#: 0
[    17.011] (II) fglrx(0): Year: 2009  Week: 0
[    17.011] (II) fglrx(0): EDID Version: 1.3
[    17.011] (II) fglrx(0): Digital Display Input
[    17.011] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    17.011] (II) fglrx(0): Gamma: 2.20
[    17.011] (II) fglrx(0): No DPMS capabilities specified
[    17.011] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.011] (II) fglrx(0): First detailed timing is preferred mode
[    17.011] (II) fglrx(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    17.011] (II) fglrx(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    17.011] (II) fglrx(0): Manufacturer's mask: 0
[    17.011] (II) fglrx(0): Supported detailed timing:
[    17.011] (II) fglrx(0): clock: 71.9 MHz   Image Size:  344 x 193 mm
[    17.011] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1536 h_border: 0
[    17.011] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 780 v_border: 0
[    17.011] (II) fglrx(0): Supported detailed timing:
[    17.011] (II) fglrx(0): clock: 47.9 MHz   Image Size:  344 x 193 mm
[    17.011] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1536 h_border: 0
[    17.011] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 780 v_border: 0
[    17.011] (II) fglrx(0):  AUO
[    17.011] (II) fglrx(0):  B156XW04 V0
[    17.011] (II) fglrx(0): EDID (in hex):
[    17.011] (II) fglrx(0):     00ffffffffffff0006afec4000000000
[    17.011] (II) fglrx(0):     00130103802213780ad7759355558d29
[    17.011] (II) fglrx(0):     24505400000001010101010101010101
[    17.011] (II) fglrx(0):     010101010101151c56aa50000c303020
[    17.011] (II) fglrx(0):     360058c110000018b91256aa50000c30
[    17.011] (II) fglrx(0):     3020360058c110000018000000fe0041
[    17.011] (II) fglrx(0):     554f0a202020202020202020000000fe
[    17.011] (II) fglrx(0):     004231353658573034205630200a0052
[    17.011] (II) fglrx(0): EDID vendor "AUO", prod id 16620
[    17.011] (II) fglrx(0): Printing DDC gathered Modelines:
[    17.011] (II) fglrx(0): Modeline "1366x768"x0.0   71.89  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1366x768"x0.0   47.93  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Printing probed modes for output LVDS
[    17.011] (II) fglrx(0): Modeline "1366x768"x60.0   71.89  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1366x768"x40.0   47.93  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "1360x768"x60.0   71.89  1360 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1360x768"x40.0   47.93  1360 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "1280x768"x60.0   71.89  1280 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1280x768"x40.0   47.93  1280 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "1280x720"x60.0   71.89  1280 1414 1446 1536  720 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1280x720"x40.0   47.93  1280 1414 1446 1536  720 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "1024x768"x60.0   71.89  1024 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1024x768"x40.0   47.93  1024 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "1024x600"x60.0   71.89  1024 1414 1446 1536  600 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "1024x600"x40.0   47.93  1024 1414 1446 1536  600 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "800x600"x60.0   71.89  800 1414 1446 1536  600 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "800x600"x40.0   47.93  800 1414 1446 1536  600 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "800x480"x60.0   71.89  800 1414 1446 1536  480 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "800x480"x40.0   47.93  800 1414 1446 1536  480 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): Modeline "640x480"x60.0   71.89  640 1414 1446 1536  480 771 777 780 -hsync -vsync (46.8 kHz)
[    17.011] (II) fglrx(0): Modeline "640x480"x40.0   47.93  640 1414 1446 1536  480 771 777 780 -hsync -vsync (31.2 kHz)
[    17.011] (II) fglrx(0): EDID for output DFP1
[    17.011] (II) fglrx(0): EDID for output CRT1
[    17.011] (II) fglrx(0): Output LVDS connected
[    17.011] (II) fglrx(0): Output DFP1 disconnected
[    17.011] (II) fglrx(0): Output CRT1 disconnected
[    17.011] (II) fglrx(0): Using user preference for initial modes
[    17.011] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    17.011] (II) fglrx(0): Display dimensions: (340, 190) mm
[    17.011] (II) fglrx(0): DPI set to (102, 102)
[    17.011] (II) fglrx(0): Eyefinity capable adapter detected.
[    17.011] (II) fglrx(0): Adapter AMD Radeon HD 6570M/5700 Series has 6 configurable heads and 1 displays connected.
[    17.011] (==) fglrx(0):  PseudoColor visuals disabled
[    17.011] (II) Loading sub module "ramdac"
[    17.011] (II) LoadModule: "ramdac"
[    17.011] (II) Module "ramdac" already built-in
[    17.011] (==) fglrx(0): NoDRI = NO
[    17.011] (==) fglrx(0): Capabilities: 0x00000000
[    17.011] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    17.011] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    17.011] (==) fglrx(0): UseFastTLS=0
[    17.011] (==) fglrx(0): BlockSignalsOnLock=1
[    17.011] (--) Depth 24 pixmap format is 32 bpp
[    17.012] (II) Loading extension ATIFGLRXDRI
[    17.012] (II) fglrx(0): doing swlDriScreenInit
[    17.012] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    17.012] ukiDynamicMajor: found major device number 251
[    17.012] ukiDynamicMajor: found major device number 251
[    17.012] ukiDynamicMajor: found major device number 251
[    17.012] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    17.012] ukiOpenDevice: node name is /dev/ati/card0
[    17.012] ukiOpenDevice: open result is 12, (OK)
[    17.012] ukiOpenByBusid: ukiOpenMinor returns 12
[    17.012] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    17.012] (II) fglrx(0): [uki] DRM interface version 1.0
[    17.012] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    17.012] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    17.012] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fba5c655000
[    17.012] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    17.012] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    17.012] (II) fglrx(0): swlDriScreenInit done
[    17.012] (II) fglrx(0): Kernel Module Version Information:
[    17.012] (II) fglrx(0):     Name: fglrx
[    17.012] (II) fglrx(0):     Version: 8.93.4
[    17.012] (II) fglrx(0):     Date: Dec  5 2011
[    17.012] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    17.012] (II) fglrx(0): Kernel Module version matches driver.
[    17.012] (II) fglrx(0): Kernel Module Build Time Information:
[    17.012] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-0.bpo.1-amd64
[    17.012] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    17.012] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    17.012] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    17.012] (II) fglrx(0): [uki] register handle = 0x00004000
[    17.044] (II) fglrx(0): DRI initialization successfull
[    17.044] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x013b0000
[    17.058] (==) fglrx(0): Backing store disabled
[    17.058] (II) Loading extension FGLRXEXTENSION
[    17.058] (==) fglrx(0): DPMS enabled
[    17.058] (II) fglrx(0): Initialized in-driver Xinerama extension
[    17.058] (**) fglrx(0): Textured Video is enabled.
[    17.058] (II) LoadModule: "glesx"
[    17.058] (II) Loading /usr/lib/xorg/modules/glesx.so
[    17.181] (II) Module glesx: vendor="X.Org Foundation"
[    17.181]     compiled for 1.4.99.906, module version = 1.0.0
[    17.181] (II) Loading extension GLESX
[    17.181] (II) fglrx(0): GLESX enableFlags = 592
[    17.182] (II) fglrx(0): GLESX is enabled
[    17.182] (II) LoadModule: "amdxmm"
[    17.182] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    17.195] (II) Module amdxmm: vendor="X.Org Foundation"
[    17.195]     compiled for 1.4.99.906, module version = 2.0.0
[    17.204] (II) Loading extension AMDXVOPL
[    17.204] (II) Loading extension AMDXVBA
[    17.204] [-     XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[    17.219] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    17.220] (II) fglrx(0): Enable composite support successfully
[    17.229] (II) fglrx(0): X context handle = 0x1
[    17.229] (II) fglrx(0): [DRI] installation complete
[    17.230] (==) fglrx(0): Silken mouse enabled
[    17.237] (==) fglrx(0): Using HW cursor of display infrastructure!
[    17.237] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    17.237] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    17.237] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    17.430] (II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
[    18.370] (--) RandR disabled
[    18.370] (II) Initializing built-in extension Generic Event Extension
[    18.370] (II) Initializing built-in extension SHAPE
[    18.370] (II) Initializing built-in extension MIT-SHM
[    18.370] (II) Initializing built-in extension XInputExtension
[    18.370] (II) Initializing built-in extension XTEST
[    18.370] (II) Initializing built-in extension BIG-REQUESTS
[    18.370] (II) Initializing built-in extension SYNC
[    18.370] (II) Initializing built-in extension XKEYBOARD
[    18.370] (II) Initializing built-in extension XC-MISC
[    18.370] (II) Initializing built-in extension SECURITY
[    18.370] (II) Initializing built-in extension XINERAMA
[    18.370] (II) Initializing built-in extension XFIXES
[    18.370] (II) Initializing built-in extension RENDER
[    18.370] (II) Initializing built-in extension RANDR
[    18.370] (II) Initializing built-in extension COMPOSITE
[    18.370] (II) Initializing built-in extension DAMAGE
[    18.370] ukiDynamicMajor: found major device number 251
[    18.371] ukiDynamicMajor: found major device number 251
[    18.371] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    18.371] ukiOpenDevice: node name is /dev/ati/card0
[    18.371] ukiOpenDevice: open result is 13, (OK)
[    18.371] ukiOpenByBusid: ukiOpenMinor returns 13
[    18.371] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    19.163] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    19.163] (II) SELinux: Disabled on system
[    19.253] (II) fglrx(0): Enable the clock gating!
[    19.254] (II) fglrx(0): Setting screen physical size to 361 x 203
[    19.639] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    19.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.639] (II) LoadModule: "evdev"
[    19.643] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.660] (II) Module evdev: vendor="X.Org Foundation"
[    19.660]     compiled for 1.10.3, module version = 2.6.0
[    19.660]     Module class: X.Org XInput Driver
[    19.660]     ABI class: X.Org XInput driver, version 12.2
[    19.660] (II) Using input driver 'evdev' for 'Power Button'
[    19.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.660] (**) Power Button: always reports core events
[    19.660] (**) Power Button: Device: "/dev/input/event4"
[    19.660] (--) Power Button: Found keys
[    19.660] (II) Power Button: Configuring as keyboard
[    19.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    19.661] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    19.661] (**) Option "xkb_rules" "evdev"
[    19.661] (**) Option "xkb_model" "pc105"
[    19.661] (**) Option "xkb_layout" "us"
[    19.662] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    19.662] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.662] (II) Using input driver 'evdev' for 'Video Bus'
[    19.662] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.662] (**) Video Bus: always reports core events
[    19.662] (**) Video Bus: Device: "/dev/input/event6"
[    19.662] (--) Video Bus: Found keys
[    19.662] (II) Video Bus: Configuring as keyboard
[    19.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[    19.662] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    19.662] (**) Option "xkb_rules" "evdev"
[    19.662] (**) Option "xkb_model" "pc105"
[    19.662] (**) Option "xkb_layout" "us"
[    19.673] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.673] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.673] (II) Using input driver 'evdev' for 'Power Button'
[    19.673] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.673] (**) Power Button: always reports core events
[    19.673] (**) Power Button: Device: "/dev/input/event2"
[    19.673] (--) Power Button: Found keys
[    19.673] (II) Power Button: Configuring as keyboard
[    19.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    19.673] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    19.673] (**) Option "xkb_rules" "evdev"
[    19.673] (**) Option "xkb_model" "pc105"
[    19.673] (**) Option "xkb_layout" "us"
[    19.674] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    19.674] (II) No input driver/identifier specified (ignoring)
[    19.674] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    19.674] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.674] (II) Using input driver 'evdev' for 'Sleep Button'
[    19.674] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.675] (**) Sleep Button: always reports core events
[    19.675] (**) Sleep Button: Device: "/dev/input/event3"
[    19.675] (--) Sleep Button: Found keys
[    19.675] (II) Sleep Button: Configuring as keyboard
[    19.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    19.675] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    19.675] (**) Option "xkb_rules" "evdev"
[    19.675] (**) Option "xkb_model" "pc105"
[    19.675] (**) Option "xkb_layout" "us"
[    19.677] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event12)
[    19.677] (II) No input driver/identifier specified (ignoring)
[    19.679] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    19.679] (II) No input driver/identifier specified (ignoring)
[    19.680] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    19.680] (II) No input driver/identifier specified (ignoring)
[    19.680] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    19.680] (II) No input driver/identifier specified (ignoring)
[    19.683] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event8)
[    19.683] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    19.683] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    19.683] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.684] (**) Lenovo EasyCamera: always reports core events
[    19.684] (**) Lenovo EasyCamera: Device: "/dev/input/event8"
[    19.684] (--) Lenovo EasyCamera: Found keys
[    19.684] (II) Lenovo EasyCamera: Configuring as keyboard
[    19.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8/event8"
[    19.684] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[    19.684] (**) Option "xkb_rules" "evdev"
[    19.684] (**) Option "xkb_model" "pc105"
[    19.684] (**) Option "xkb_layout" "us"
[    19.691] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.691] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.691] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.691] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.691] (**) AT Translated Set 2 keyboard: always reports core events
[    19.691] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    19.691] (--) AT Translated Set 2 keyboard: Found keys
[    19.691] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    19.691] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.691] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    19.691] (**) Option "xkb_rules" "evdev"
[    19.691] (**) Option "xkb_model" "pc105"
[    19.691] (**) Option "xkb_layout" "us"
[    19.692] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event13)
[    19.692] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[    19.692] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[    19.692] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.692] (**) PS/2 Generic Mouse: always reports core events
[    19.692] (**) PS/2 Generic Mouse: Device: "/dev/input/event13"
[    19.692] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[    19.692] (--) PS/2 Generic Mouse: Found relative axes
[    19.692] (--) PS/2 Generic Mouse: Found x and y relative axes
[    19.692] (II) PS/2 Generic Mouse: Configuring as mouse
[    19.692] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[    19.692] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.692] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input13/event13"
[    19.692] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[    19.692] (II) PS/2 Generic Mouse: initialized for relative axes.
[    19.692] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[    19.692] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[    19.692] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    19.692] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    19.692] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[    19.692] (II) No input driver/identifier specified (ignoring)
[    19.693] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[    19.693] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    19.693] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    19.693] (II) LoadModule: "synaptics"
[    19.693] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.711] (II) Module synaptics: vendor="X.Org Foundation"
[    19.711]     compiled for 1.10.3, module version = 1.4.1
[    19.711]     Module class: X.Org XInput Driver
[    19.711]     ABI class: X.Org XInput driver, version 12.2
[    19.711] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    19.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.711] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.711] (**) Option "Device" "/dev/input/event14"
[    19.804] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5512
[    19.804] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4714
[    19.804] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    19.804] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    19.804] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    19.804] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    19.804] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.808] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event14"
[    19.808] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    19.808] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    19.808] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    19.808] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    19.809] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    19.809] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    19.809] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    19.809] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    19.809] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    19.809] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    19.809] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    19.809] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    19.809] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.809] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.809] (**) Option "Device" "/dev/input/mouse1"
[    19.809] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
[    19.809] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
[    19.809] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
[    19.809] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
[    19.830] (EE) Query no Synaptics: 6003C8
[    19.830] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    19.830] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    19.836] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[    19.836] (II) UnloadModule: "synaptics"
[    19.836] (II) Unloading synaptics
[    19.836] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[    19.836] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    19.836] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    19.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.837] (**) Ideapad extra buttons: always reports core events
[    19.837] (**) Ideapad extra buttons: Device: "/dev/input/event7"
[    19.837] (--) Ideapad extra buttons: Found keys
[    19.837] (II) Ideapad extra buttons: Configuring as keyboard
[    19.837] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input7/event7"
[    19.837] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[    19.837] (**) Option "xkb_rules" "evdev"
[    19.837] (**) Option "xkb_model" "pc105"
[    19.837] (**) Option "xkb_layout" "us"
[    19.837] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    19.837] (II) No input driver/identifier specified (ignoring)
[    19.847] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    25.539] (II) fglrx(0): EDID vendor "AUO", prod id 16620
[    25.539] (II) fglrx(0): Printing DDC gathered Modelines:
[    25.539] (II) fglrx(0): Modeline "1366x768"x0.0   71.89  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    25.539] (II) fglrx(0): Modeline "1366x768"x0.0   47.93  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    25.547] (II) fglrx(0): EDID vendor "AUO", prod id 16620
[    25.547] (II) fglrx(0): Printing DDC gathered Modelines:
[    25.547] (II) fglrx(0): Modeline "1366x768"x0.0   71.89  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (46.8 kHz)
[    25.547] (II) fglrx(0): Modeline "1366x768"x0.0   47.93  1366 1414 1446 1536  768 771 777 780 -hsync -vsync (31.2 kHz)
[    42.889] (II) fglrx(0): AC Offline
[    73.600] (II) fglrx(0): AC Online

xaos52 · 2012-03-24 11:13:47

[ 8.200539] iwlwifi 0000:05:00.0: request for firmware file 'iwlwifi-1000-5.ucode' failed.
[ 8.203415] iwlwifi 0000:05:00.0: request for firmware file 'iwlwifi-1000-4.ucode' failed.
[ 8.301274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.304976] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.305171] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.305556] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.305699] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 8.305738] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 8.325302] iwlwifi 0000:05:00.0: Firmware has old API version, expected v5 through v6, got v3.
[ 8.325385] iwlwifi 0000:05:00.0: New firmware can be obtained from http://www.intellinuxwireless.org/.
[ 8.325463] iwlwifi 0000:05:00.0: loaded firmware version 128.50.3.1 build 13488

Still going over the info you posted. Noticed that your wireless is using an older firmware version.
Check if installed 'firmware-iwlwifi' is the latest version:

apt-cache policy firmware-iwlwifi

or
reinstall it so you know it is the latest version:

sudo apt-get --reinstall install firmware-iwlwifi

You said you have to reboot to regain keyboard activity?
In that case, eventual error messages can not be present in the info you posted - my bad.
Can you post the output of

cat /var/log/dmesg.0

after the incident occurred and you have rebooted.

Also post output of

sudo /var/log/messages|grep -i -E 'oops|stack'

x

Last edited by xaos52 (2012-03-24 11:16:01)

cJones · 2012-03-24 22:35:13

Okay so I used the reinstall command, do you want me to repost one of the previous commands?

And as for the new ones, do you want me to run those next time it happens or now?

Ed Flanders · 2012-03-25 02:27:23

Couldn't it be a hardware problem? Try a live cd of another distro and see if the problem appears. Just guessing...

cJones · 2012-03-25 06:03:23

Ed Flanders wrote:

Couldn't it be a hardware problem? Try a live cd of another distro and see if the problem appears. Just guessing...

Doubt it, I have never had this problem with any OS over the last two years

xaos52 · 2012-03-25 15:10:11

Post output of commands after the problem occurred, except for the last command, because info in /var/log/messages is accumulated. It is possible that the command produces no output at all.
x

cJones · 2012-03-26 07:36:27

xaos52 wrote:

Also post output of
sudo /var/log/messages|grep -i -E 'oops|stack'
x

"command not found" I will post the other one when it happens again

xaos52 · 2012-03-26 14:54:07

My bad. Should be:

sudo cat /var/log/messages|grep -i -E 'oops|stack'

x

cJones · 2012-03-27 07:15:43

carson@Carson-PC:~$ sudo cat /var/log/messages|grep -i -E 'oops|stack'
[sudo] password for carson:
carson@Carson-PC:~$

Did I do something wrong or was there just nothing to display?

xaos52 · 2012-03-27 09:40:23

Command is OK. There was nothing to display.
x

CrunchBang Linux

SEARCH

#1 2012-02-28 00:29:29

Keyboard Inconsistency at Boot?

#2 2012-02-28 00:31:21

Re: Keyboard Inconsistency at Boot?

#3 2012-02-28 00:39:40

Re: Keyboard Inconsistency at Boot?

#4 2012-02-28 00:42:12

Re: Keyboard Inconsistency at Boot?

#5 2012-02-28 00:43:50

Re: Keyboard Inconsistency at Boot?

#6 2012-02-28 00:45:57

Re: Keyboard Inconsistency at Boot?

#7 2012-02-28 00:49:01

Re: Keyboard Inconsistency at Boot?

#8 2012-02-28 00:56:10

Re: Keyboard Inconsistency at Boot?

#9 2012-03-23 08:29:17

Re: Keyboard Inconsistency at Boot?

#10 2012-03-23 09:25:17

Re: Keyboard Inconsistency at Boot?

#11 2012-03-24 06:01:19

Re: Keyboard Inconsistency at Boot?

#12 2012-03-24 06:02:28

Re: Keyboard Inconsistency at Boot?

#13 2012-03-24 11:13:47

Re: Keyboard Inconsistency at Boot?

#14 2012-03-24 22:35:13

Re: Keyboard Inconsistency at Boot?

#15 2012-03-25 02:27:23

Re: Keyboard Inconsistency at Boot?

#16 2012-03-25 06:03:23

Re: Keyboard Inconsistency at Boot?

#17 2012-03-25 15:10:11

Re: Keyboard Inconsistency at Boot?

#18 2012-03-26 07:36:27

Re: Keyboard Inconsistency at Boot?

#19 2012-03-26 14:54:07

Re: Keyboard Inconsistency at Boot?

#20 2012-03-27 07:15:43

Re: Keyboard Inconsistency at Boot?

#21 2012-03-27 09:40:23

Re: Keyboard Inconsistency at Boot?

Board footer