SEARCH

Enter your search query in the box above ^, or use the forum search tool.

You are not logged in.

#1 2012-06-10 16:31:17

bedhead
Member
Registered: 2012-06-05
Posts: 21

[Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

3.2.0-0.bpo.2-amd64  system crash on boot

Very often the system does not boot properly, crashing on boot requiring a 4 sec shutdown and re-start up to 5 times before it finally boots.

I have started suspending it rather than using shutdown as it runs fine once booted.

The error screen begins: Pid: 1, comm: swapper/0  Tainted: G  D  3.2.0-0.bpo.2-amd64

I have an image captured but I don't know how to attach it to this new post, please advise ?

Last edited by bedhead (2012-08-15 07:00:03)

Offline

Be excellent to each other!

#2 2012-06-10 16:41:18

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

Online

#3 2012-06-10 16:45:47

pidsley
Window Mangler
Registered: 2012-05-23
Posts: 1,752

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

Offline

#4 2012-06-11 11:33:14

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

Thanks, I will get on to this

Last edited by bedhead (2012-06-11 11:34:27)

Offline

#5 2012-06-11 14:31:30

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

The error message captured is as follows:

tZTkxMw

Offline

#6 2012-06-11 14:32:46

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

Can anyone interpret this for me please and recommend a fix?

Thank you

Offline

#7 2012-06-11 15:39:58

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

This is what is commonly referred to "a kernel panic" or "kernel oops"
Problem is that it canhave several causes. The couple of lines preceding the published ones could make things clearer.

Another option is adding the 'debug' boot parameter:
When you have the grub menu displayed, position your cursor on the line you want to boot,
press 'e'
position the cursor at the end of the line starting with 'linux'
append the parameter 'debug' to the line, preceeded with a space
press F10 or Ctrl+X to boot.

You will be dropped in a a shell environment several times.
Just press CTRL+D to continue.

Try to capture the message that precedes the panic, and publish it on this forum.

hth

Last edited by xaos52 (2012-06-11 15:41:00)

Online

#8 2012-06-24 10:00:16

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

I have been unable to get the debug to freeze the boot up sequence, its runs through regardless.

I have found if i let the bootloader countdown rather than select the OS then it loads most of the time without an issue but if I load the pure Debian image it loads without error every time?

Offline

#9 2012-06-24 15:25:23

xaos52
The Good Doctor
From: Planet of the @s
Registered: 2011-06-24
Posts: 4,602

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

What do you mean by "pure Debian image" ?

Can you give us more details regarding make and model of the computer.

When it has booted up fine, post output of

dmesg
lspci -knn

Wild guess, but could it be a USB device or another device  connected at boot?

Online

#10 2012-07-03 17:56:22

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.18-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sun Jun 3 21:40:57 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=0cba784e-568f-43a4-990c-2e5f8d87fb56 ro i915.lvds_downclock=1 i915.i915_enable_fbc=1 i915.i915_enable_rc6=1 splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000aa5d0000 (usable)
[    0.000000]  BIOS-e820: 00000000aa5d0000 - 00000000aa5d0200 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000aa5d0200 - 00000000aa5d3000 (reserved)
[    0.000000]  BIOS-e820: 00000000aa5d3000 - 00000000aa6d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000aa6d0000 - 00000000aa6f0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000aa6f0000 - 00000000afa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000024fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: TOSHIBA SATELLITE R830/Portable PC, BIOS Version 3.60   01/24/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 uncachable
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0AC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0AB800000 mask FFF800000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask F80000000 write-back
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000ab800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xaa5d0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000aa5d0000
[    0.000000]  0000000000 - 00aa400000 page 2M
[    0.000000]  00aa400000 - 00aa5d0000 page 4k
[    0.000000] kernel direct mapping tables up to aa5d0000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000024fe00000
[    0.000000]  0100000000 - 024fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 24fe00000 @ aa5c5000-aa5d0000
[    0.000000] RAMDISK: 175bc000 - 18040000
[    0.000000] ACPI: RSDP 00000000000f0030 00014 (v00 TOSHIB)
[    0.000000] ACPI: RSDT 00000000aa6ef038 00050 (v01 TOSHIB A007D    00000003      01000013)
[    0.000000] ACPI: FACP 00000000aa6ee000 00081 (v02 TOSHIB A007D    00000003 LOHR 0000005F)
[    0.000000] ACPI: DSDT 00000000aa6dd000 08A46 (v02 TOSHIB A007D    20111220 INTL 20061109)
[    0.000000] ACPI: FACS 00000000aa6be000 00040
[    0.000000] ACPI: HPET 00000000aa6ed000 00038 (v01 TOSHIB A007D    00000001 LOHR 0000005F)
[    0.000000] ACPI: APIC 00000000aa6ec000 000BC (v01 TOSHIB A007D    00000001 LOHR 0000005F)
[    0.000000] ACPI: MCFG 00000000aa6eb000 0003C (v01 TOSHIB A007D    00000001 LOHR 0000005F)
[    0.000000] ACPI: ASF! 00000000aa6ea000 000A0 (v32 TOSHIB A007D    00000001 LOHR 0000005F)
[    0.000000] ACPI: BOOT 00000000aa6e8000 00028 (v01 TOSHIB A007D    00000000 LOHR 0000005F)
[    0.000000] ACPI: SLIC 00000000aa6e7000 00176 (v01 TOSHIB A007D    00000000 LOHR 0000005F)
[    0.000000] ACPI: SSDT 00000000aa6dc000 00395 (v01 TOSHIB SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000aa6d9000 00720 (v01 TOSHIB PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000aa6d7000 0092F (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000aa6d6000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000024fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000024fe00000
[    0.000000]   NODE_DATA [000000024fdfb000 - 000000024fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880247400000-ffff88024e5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0024fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000aa5d0
[    0.000000]     0: 0x00100000 -> 0x0024fe00
[    0.000000] On node 0 totalpages: 2072414
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 678408 pages, LIFO batch:31
[    0.000000]   Normal zone: 18809 pages used for memmap
[    0.000000]   Normal zone: 1356935 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000aa5d0000 - 00000000aa5d1000
[    0.000000] PM: Registered nosave memory: 00000000aa5d1000 - 00000000aa5d3000
[    0.000000] PM: Registered nosave memory: 00000000aa5d3000 - 00000000aa6d0000
[    0.000000] PM: Registered nosave memory: 00000000aa6d0000 - 00000000aa6f0000
[    0.000000] PM: Registered nosave memory: 00000000aa6f0000 - 00000000afa00000
[    0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:48600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88024fa00000 s82304 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2039264
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=0cba784e-568f-43a4-990c-2e5f8d87fb56 ro i915.lvds_downclock=1 i915.i915_enable_fbc=1 i915.i915_enable_rc6=1 splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8086612k/9697280k available (3513k kernel code, 1407624k absent, 203044k reserved, 3220k data, 608k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2095.364 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.72 BogoMIPS (lpj=8381456)
[    0.000127] pid_max: default: 32768 minimum: 301
[    0.000226] Security Framework initialized
[    0.000287] AppArmor: AppArmor disabled by boot time parameter
[    0.001060] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003069] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003957] Mount-cache hash table entries: 256
[    0.004129] Initializing cgroup subsys cpuacct
[    0.004193] Initializing cgroup subsys memory
[    0.004263] Initializing cgroup subsys devices
[    0.004325] Initializing cgroup subsys freezer
[    0.004384] Initializing cgroup subsys net_cls
[    0.004444] Initializing cgroup subsys blkio
[    0.004508] Initializing cgroup subsys perf_event
[    0.004596] CPU: Physical Processor ID: 0
[    0.004654] CPU: Processor Core ID: 0
[    0.004717] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004718] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004846] mce: CPU supports 7 MCE banks
[    0.004915] CPU0: Thermal monitoring enabled (TM1)
[    0.004982] using mwait in idle threads.
[    0.006254] ACPI: Core revision 20110623
[    0.013855] x2apic not enabled, IRQ remapping init failed
[    0.014317] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054006] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
[    0.159384] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.159585] PEBS disabled due to CPU errata.
[    0.159647] ... version:                3
[    0.159706] ... bit width:              48
[    0.159766] ... generic registers:      4
[    0.159827] ... value mask:             0000ffffffffffff
[    0.159888] ... max period:             000000007fffffff
[    0.159949] ... fixed-purpose events:   3
[    0.160008] ... event mask:             000000070000000f
[    0.160213] NMI watchdog enabled, takes one hw-pmu counter.
[    0.160371] Booting Node   0, Processors  #1
[    0.160460] smpboot cpu 1: start_ip = 99000
[    0.271311] NMI watchdog enabled, takes one hw-pmu counter.
[    0.271476]  #2
[    0.271520] smpboot cpu 2: start_ip = 99000
[    0.379194] NMI watchdog enabled, takes one hw-pmu counter.
[    0.379353]  #3
[    0.379397] smpboot cpu 3: start_ip = 99000
[    0.486969] NMI watchdog enabled, takes one hw-pmu counter.
[    0.487058] Brought up 4 CPUs
[    0.487117] Total of 4 processors activated (16761.61 BogoMIPS).
[    0.490656] devtmpfs: initialized
[    0.495704] PM: Registering ACPI NVS region at aa5d0000 (512 bytes)
[    0.495769] PM: Registering ACPI NVS region at aa5d3000 (1036288 bytes)
[    0.496026] print_constraints: dummy: 
[    0.496143] NET: Registered protocol family 16
[    0.496297] ACPI: bus type pci registered
[    0.496434] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.496515] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.503911] PCI: Using configuration type 1 for base access
[    0.504735] bio: create slab <bio-0> at 0
[    0.504886] ACPI: Added _OSI(Module Device)
[    0.504946] ACPI: Added _OSI(Processor Device)
[    0.505007] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.505069] ACPI: Added _OSI(Processor Aggregator Device)
[    0.506406] ACPI: EC: Look up EC in DSDT
[    0.530889] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.532269] ACPI: SSDT 00000000aafd6798 0071E (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.532885] ACPI: Dynamic OEM Table Load:
[    0.533026] ACPI: SSDT           (null) 0071E (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.543209] ACPI: SSDT 00000000aafd7a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.543766] ACPI: Dynamic OEM Table Load:
[    0.543906] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.554980] ACPI: SSDT 00000000aafd5d98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.555468] ACPI: Dynamic OEM Table Load:
[    0.555608] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.567583] ACPI: Interpreter enabled
[    0.567644] ACPI: (supports S0 S3 S4 S5)
[    0.567888] ACPI: Using IOAPIC for interrupt routing
[    0.593631] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.593696] HEST: Table not found.
[    0.593757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.594136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.594813] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.594878] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.594943] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.595019] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.595096] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.595173] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.595251] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[    0.595339] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    0.595379] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[    0.595390] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.595396] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.595401] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.595458] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.595483] pci 0000:00:16.0: reg 10: [mem 0xc4824000-0xc482400f 64bit]
[    0.595562] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.595567] pci 0000:00:16.0: PME# disabled
[    0.595600] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[    0.595619] pci 0000:00:19.0: reg 10: [mem 0xc4800000-0xc481ffff]
[    0.595629] pci 0000:00:19.0: reg 14: [mem 0xc482a000-0xc482afff]
[    0.595638] pci 0000:00:19.0: reg 18: [io  0x3060-0x307f]
[    0.595706] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.595710] pci 0000:00:19.0: PME# disabled
[    0.595737] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.595759] pci 0000:00:1a.0: reg 10: [mem 0xc4829000-0xc48293ff]
[    0.595855] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.595859] pci 0000:00:1a.0: PME# disabled
[    0.595887] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.595903] pci 0000:00:1b.0: reg 10: [mem 0xc4820000-0xc4823fff 64bit]
[    0.595977] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.595982] pci 0000:00:1b.0: PME# disabled
[    0.596010] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.596140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.596145] pci 0000:00:1c.0: PME# disabled
[    0.596182] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.596314] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.596319] pci 0000:00:1c.1: PME# disabled
[    0.596355] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    0.596487] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.596492] pci 0000:00:1c.2: PME# disabled
[    0.596527] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.596612] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.596616] pci 0000:00:1c.4: PME# disabled
[    0.596642] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.596727] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.596731] pci 0000:00:1c.5: PME# disabled
[    0.596757] pci 0000:00:1c.6: [8086:2448] type 1 class 0x000604
[    0.596842] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.596846] pci 0000:00:1c.6: PME# disabled
[    0.596878] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.596901] pci 0000:00:1d.0: reg 10: [mem 0xc4828000-0xc48283ff]
[    0.596997] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.597001] pci 0000:00:1d.0: PME# disabled
[    0.597030] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    0.597163] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    0.597183] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.597191] pci 0000:00:1f.2: reg 14: [io  0x309c-0x309f]
[    0.597200] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.597209] pci 0000:00:1f.2: reg 1c: [io  0x3098-0x309b]
[    0.597217] pci 0000:00:1f.2: reg 20: [io  0x3040-0x305f]
[    0.597226] pci 0000:00:1f.2: reg 24: [mem 0xc4827000-0xc48277ff]
[    0.597274] pci 0000:00:1f.2: PME# supported from D3hot
[    0.597279] pci 0000:00:1f.2: PME# disabled
[    0.597464] pci 0000:01:00.0: [1180:e823] type 0 class 0x000880
[    0.597483] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.597761] pci 0000:01:00.0: reg 10: [mem 0xc4700000-0xc47000ff]
[    0.597962] pci 0000:01:00.0: supports D1 D2
[    0.597963] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.597969] pci 0000:01:00.0: PME# disabled
[    0.602962] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.603031] pci 0000:00:1c.0:   bridge window [mem 0xc4700000-0xc47fffff]
[    0.603110] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.603175] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.603180] pci 0000:00:1c.1:   bridge window [mem 0xc2700000-0xc46fffff]
[    0.603189] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc23fffff 64bit pref]
[    0.603305] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280
[    0.603352] pci 0000:04:00.0: reg 10: [mem 0xc2600000-0xc260ffff 64bit]
[    0.603579] pci 0000:04:00.0: supports D1
[    0.603580] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.603590] pci 0000:04:00.0: PME# disabled
[    0.610719] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.610817] pci 0000:00:1c.2:   bridge window [mem 0xc2600000-0xc26fffff]
[    0.610909] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[    0.610946] pci 0000:05:00.0: reg 10: [mem 0xc2500000-0xc2501fff 64bit]
[    0.611146] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.611152] pci 0000:05:00.0: PME# disabled
[    0.618712] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.618807] pci 0000:00:1c.4:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.618860] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.618926] pci 0000:00:1c.5:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.618980] pci 0000:00:1c.6: PCI bridge to [bus 07-07] (subtractive decode)
[    0.619054] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.619056] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.619059] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.619061] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.619063] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.619066] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.619068] pci 0000:00:1c.6:   bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
[    0.619108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.619390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.619450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.619508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.619568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.619631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.619691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[    0.619771]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.619835]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.619914] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.624819] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.625465] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.626059] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.626708] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[    0.627302] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.627891] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.628576] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[    0.629164] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.629809] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.629895] vgaarb: loaded
[    0.629952] vgaarb: bridge control possible 0000:00:02.0
[    0.630049] PCI: Using ACPI for IRQ routing
[    0.631691] PCI: pci_cache_line_size set to 64 bytes
[    0.632079] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
[    0.632081] reserve RAM buffer: 00000000aa5d0000 - 00000000abffffff 
[    0.632085] reserve RAM buffer: 000000024fe00000 - 000000024fffffff 
[    0.632194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.632618] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.634695] Switching to clocksource hpet
[    0.636604] pnp: PnP ACPI init
[    0.636676] ACPI: bus type pnp registered
[    0.637043] pnp 00:00: [bus 00-3f]
[    0.637046] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.637047] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.637049] pnp 00:00: [io  0x0d00-0xffff window]
[    0.637051] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.637054] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.637055] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.637057] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.637059] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.637061] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.637063] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.637065] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.637068] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.637070] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.637072] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.637074] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.637075] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.637077] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.637079] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[    0.637081] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.637134] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.637244] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.637246] pnp 00:01: [mem 0xfed10000-0xfed17fff]
[    0.637248] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.637250] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.637251] pnp 00:01: [mem 0xafa00000-0xafa00fff]
[    0.637253] pnp 00:01: [mem 0xfeb00000-0xfeb03fff]
[    0.637255] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.637257] pnp 00:01: [mem 0xfed40000-0xfed8ffff]
[    0.637259] pnp 00:01: [mem 0xff000000-0xffffffff]
[    0.637260] pnp 00:01: [mem 0xfee00000-0xfeefffff]
[    0.637307] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.637373] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.637437] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.637502] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.637567] system 00:01: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.637632] system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved
[    0.637697] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.637760] system 00:01: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.637826] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[    0.637892] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.637957] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.638235] pnp 00:02: [io  0x0000-0x001f]
[    0.638237] pnp 00:02: [io  0x0081-0x0091]
[    0.638239] pnp 00:02: [io  0x0093-0x009f]
[    0.638241] pnp 00:02: [io  0x00c0-0x00df]
[    0.638243] pnp 00:02: [dma 4]
[    0.638281] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.638391] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.638448] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.638514] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.638525] pnp 00:04: [io  0x00f0]
[    0.638534] pnp 00:04: [irq 13]
[    0.638570] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.638581] pnp 00:05: [io  0x002e-0x002f]
[    0.638583] pnp 00:05: [io  0x0061]
[    0.638584] pnp 00:05: [io  0x0063]
[    0.638586] pnp 00:05: [io  0x0065]
[    0.638588] pnp 00:05: [io  0x0067]
[    0.638590] pnp 00:05: [io  0x0070]
[    0.638591] pnp 00:05: [io  0x0080]
[    0.638592] pnp 00:05: [io  0x0092]
[    0.638594] pnp 00:05: [io  0x00b2-0x00b3]
[    0.638596] pnp 00:05: [io  0x1000-0x100f]
[    0.638597] pnp 00:05: [io  0xffff]
[    0.638599] pnp 00:05: [io  0xffff]
[    0.638600] pnp 00:05: [io  0x0400-0x047f]
[    0.638602] pnp 00:05: [io  0x0500-0x053f]
[    0.638668] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.638743] system 00:05: [io  0xffff] has been reserved
[    0.638809] system 00:05: [io  0xffff] has been reserved
[    0.638872] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.638935] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.638998] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.639016] pnp 00:06: [io  0x004e-0x004f]
[    0.639017] pnp 00:06: [io  0x0680-0x06ff]
[    0.639019] pnp 00:06: [io  0x01e0-0x01e7]
[    0.639070] system 00:06: [io  0x0680-0x06ff] has been reserved
[    0.639134] system 00:06: [io  0x01e0-0x01e7] has been reserved
[    0.639197] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.639207] pnp 00:07: [io  0x0070-0x0077]
[    0.639212] pnp 00:07: [irq 8]
[    0.639249] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.639259] pnp 00:08: [io  0x0060]
[    0.639261] pnp 00:08: [io  0x0064]
[    0.639266] pnp 00:08: [irq 1]
[    0.639301] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.639314] pnp 00:09: [irq 12]
[    0.639352] pnp 00:09: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
[    0.639397] pnp 00:0a: [mem 0x20000000-0x201fffff]
[    0.639399] pnp 00:0a: [mem 0x40000000-0x401fffff]
[    0.639455] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.639520] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
[    0.639585] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.639722] pnp: PnP ACPI: found 11 devices
[    0.639782] ACPI: ACPI bus type pnp unregistered
[    0.646770] PCI: max bus depth: 1 pci_try_num: 2
[    0.646836] pci 0000:00:1c.5: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
[    0.646917] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.646981] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.647049] pci 0000:00:1c.0:   bridge window [mem 0xc4700000-0xc47fffff]
[    0.647123] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.647186] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.647255] pci 0000:00:1c.1:   bridge window [mem 0xc2700000-0xc46fffff]
[    0.647323] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc23fffff 64bit pref]
[    0.647408] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.647475] pci 0000:00:1c.2:   bridge window [mem 0xc2600000-0xc26fffff]
[    0.647549] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.647614] pci 0000:00:1c.4:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.647684] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.647747] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.647813] pci 0000:00:1c.5:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.647880] pci 0000:00:1c.5:   bridge window [mem 0xafb00000-0xafcfffff 64bit pref]
[    0.647962] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.648047] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.648115] pci 0000:00:1c.0: setting latency timer to 64
[    0.648127] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.648194] pci 0000:00:1c.1: setting latency timer to 64
[    0.648206] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.648274] pci 0000:00:1c.2: setting latency timer to 64
[    0.648281] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.648347] pci 0000:00:1c.4: setting latency timer to 64
[    0.648354] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.648420] pci 0000:00:1c.5: setting latency timer to 64
[    0.648427] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.648494] pci 0000:00:1c.6: setting latency timer to 64
[    0.648498] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.648500] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.648502] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.648504] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.648506] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.648507] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.648509] pci_bus 0000:00: resource 10 [mem 0xafa00000-0xfeafffff]
[    0.648512] pci_bus 0000:01: resource 1 [mem 0xc4700000-0xc47fffff]
[    0.648514] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.648515] pci_bus 0000:02: resource 1 [mem 0xc2700000-0xc46fffff]
[    0.648517] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc23fffff 64bit pref]
[    0.648520] pci_bus 0000:04: resource 1 [mem 0xc2600000-0xc26fffff]
[    0.648522] pci_bus 0000:05: resource 1 [mem 0xc2500000-0xc25fffff]
[    0.648523] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.648525] pci_bus 0000:06: resource 1 [mem 0xc2400000-0xc24fffff]
[    0.648527] pci_bus 0000:06: resource 2 [mem 0xafb00000-0xafcfffff 64bit pref]
[    0.648529] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
[    0.648531] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
[    0.648533] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[    0.648535] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.648537] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.648539] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff]
[    0.648541] pci_bus 0000:07: resource 10 [mem 0xafa00000-0xfeafffff]
[    0.648608] NET: Registered protocol family 2
[    0.648909] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.650056] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.651489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.651683] TCP: Hash tables configured (established 524288 bind 65536)
[    0.651747] TCP reno registered
[    0.651820] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.651920] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.652110] NET: Registered protocol family 1
[    0.652180] pci 0000:00:02.0: Boot video device
[    0.652197] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.652288] pci 0000:00:1a.0: PCI INT A disabled
[    0.652384] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.652470] pci 0000:00:1d.0: PCI INT A disabled
[    0.652678] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.652783] pci 0000:05:00.0: PCI INT A disabled
[    0.652849] PCI: CLS 64 bytes, default 64
[    0.652895] Unpacking initramfs...
[    0.915591] Freeing initrd memory: 10768k freed
[    0.916970] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.917038] Placing 64MB software IO TLB between ffff8800a65c5000 - ffff8800aa5c5000
[    0.917115] software IO TLB at phys 0xa65c5000 - 0xaa5c5000
[    0.917191] Simple Boot Flag at 0x7c set to 0x1
[    0.917778] audit: initializing netlink socket (disabled)
[    0.917850] type=2000 audit(1341336904.760:1): initialized
[    0.939917] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.957147] VFS: Disk quotas dquot_6.5.2
[    0.957240] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.957377] msgmni has been set to 15815
[    0.957591] alg: No test for stdrng (krng)
[    0.957683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.957761] io scheduler noop registered
[    0.957820] io scheduler deadline registered
[    0.957897] io scheduler cfq registered (default)
[    0.958366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.958452] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.958516] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.958776] acpiphp: Slot [1] registered
[    0.958911] acpiphp: Slot [1-1] registered
[    0.959091] intel_idle: MWAIT substates: 0x21120
[    0.959093] intel_idle: v0.4 model 0x2A
[    0.959094] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.959139] ERST: Table is not found!
[    0.959197] GHES: HEST is not enabled!
[    0.959314] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.130466] Linux agpgart interface v0.103
[    1.130603] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.130749] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.131877] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.132051] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.133626] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.135737] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.135803] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.135974] mousedev: PS/2 mouse device common for all mice
[    1.136077] rtc_cmos 00:07: RTC can wake from S4
[    1.136267] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.136358] rtc0: alarms up to one year, 242 bytes nvram, hpet irqs
[    1.136576] cpuidle: using governor ladder
[    1.136863] cpuidle: using governor menu
[    1.137094] TCP cubic registered
[    1.137226] NET: Registered protocol family 10
[    1.137739] Mobile IPv6
[    1.137796] NET: Registered protocol family 17
[    1.137858] Registering the dns_resolver key type
[    1.138172] PM: Hibernation image not present or could not be loaded.
[    1.138183] registered taskstats version 1
[    1.147248] rtc_cmos 00:07: setting system clock to 2012-07-03 17:35:06 UTC (1341336906)
[    1.147396] Initializing network drop monitor service
[    1.148497] Freeing unused kernel memory: 608k freed
[    1.148625] Write protecting the kernel read-only data: 6144k
[    1.150584] Freeing unused kernel memory: 564k freed
[    1.152877] Freeing unused kernel memory: 700k freed
[    1.153237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.213732] udev[61]: starting version 164
[    1.224401] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    1.224471] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    1.224579] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.224659] e1000e 0000:00:19.0: setting latency timer to 64
[    1.224784] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[    1.232618] sdhci: Secure Digital Host Controller Interface driver
[    1.232689] sdhci: Copyright(c) Pierre Ossman
[    1.233053] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.233347] sdhci-pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.233611] sdhci-pci 0000:01:00.0: setting latency timer to 64
[    1.233640] mmc0: no vmmc regulator found
[    1.238583] thermal LNXTHERM:00: registered as thermal_zone0
[    1.238654] ACPI: Thermal Zone [TZ01] (16 C)
[    1.248787] Registered led device: mmc0::
[    1.249553] usbcore: registered new interface driver usbfs
[    1.249641] usbcore: registered new interface driver hub
[    1.252863] usbcore: registered new device driver usb
[    1.253556] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.253659] xhci_hcd 0000:05:00.0: setting latency timer to 64
[    1.253664] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.253748] SCSI subsystem initialized
[    1.253753] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[    1.253994] xhci_hcd 0000:05:00.0: irq 16, io mem 0xc2500000
[    1.254100] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[    1.254106] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[    1.254112] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[    1.254117] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
[    1.254123] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
[    1.260233] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.260472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.260544] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.260627] usb usb1: Product: xHCI Host Controller
[    1.260694] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 xhci_hcd
[    1.260771] usb usb1: SerialNumber: 0000:05:00.0
[    1.261030] xHCI xhci_add_endpoint called for root hub
[    1.261033] xHCI xhci_check_bandwidth called for root hub
[    1.261078] hub 1-0:1.0: USB hub found
[    1.261151] hub 1-0:1.0: 2 ports detected
[    1.261301] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.261375] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    1.261474] xhci_hcd 0000:05:00.0: startup error -19
[    1.261542] xhci_hcd 0000:05:00.0: USB bus 2 deregistered
[    1.261618] xhci_hcd 0000:05:00.0: remove, state 1
[    1.261683] usb usb1: USB disconnect, device number 1
[    1.262111] xHCI xhci_drop_endpoint called for root hub
[    1.262114] xHCI xhci_check_bandwidth called for root hub
[    1.262292] xhci_hcd 0000:05:00.0: USB bus 1 deregistered
[    1.262839] libata version 3.00 loaded.
[    1.309867] xhci_hcd 0000:05:00.0: PCI INT A disabled
[    1.336181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.530370] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:9d:87:ca:7b:2a
[    1.530452] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.530569] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.530689] ahci 0000:00:1f.2: version 3.0
[    1.530714] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.530839] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.530870] ahci: SSS flag set, parallel bus scan disabled
[    1.545512] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0xd impl SATA mode
[    1.545595] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.545679] ahci 0000:00:1f.2: setting latency timer to 64
[    1.562081] scsi0 : ahci
[    1.562312] scsi1 : ahci
[    1.562453] scsi2 : ahci
[    1.562595] scsi3 : ahci
[    1.562730] scsi4 : ahci
[    1.562884] scsi5 : ahci
[    1.563293] ata1: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827100 irq 41
[    1.563370] ata2: DUMMY
[    1.563427] ata3: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827200 irq 41
[    1.563506] ata4: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827280 irq 41
[    1.563582] ata5: DUMMY
[    1.563639] ata6: DUMMY
[    1.563727] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.563845] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.563850] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.563972] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.564077] ehci_hcd 0000:00:1a.0: debug port 2
[    1.568017] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.568023] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4829000
[    1.581411] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.581519] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.581585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.581661] usb usb1: Product: EHCI Host Controller
[    1.581722] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[    1.581786] usb usb1: SerialNumber: 0000:00:1a.0
[    1.582112] hub 1-0:1.0: USB hub found
[    1.582175] hub 1-0:1.0: 3 ports detected
[    1.582316] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.582414] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.582419] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.582493] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.582597] ehci_hcd 0000:00:1d.0: debug port 2
[    1.586544] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.586568] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc4828000
[    1.601378] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.601503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.601568] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.601645] usb usb2: Product: EHCI Host Controller
[    1.601705] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.2-amd64 ehci_hcd
[    1.601769] usb usb2: SerialNumber: 0000:00:1d.0
[    1.602035] hub 2-0:1.0: USB hub found
[    1.602098] hub 2-0:1.0: 3 ports detected
[    1.624896] mmc0: new SDHC card at address e6f0
[    1.626639] mmcblk0: mmc0:e6f0 SD16G 14.8 GiB 
[    1.631722]  mmcblk0: p1
[    1.880959] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.881920] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.882123] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880246c87678), AE_NOT_FOUND (20110623/psparse-536)
[    1.882386] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.882585] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880246c87650), AE_NOT_FOUND (20110623/psparse-536)
[    1.892984] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.912934] Refined TSC clocksource calibration: 2095.240 MHz.
[    1.913017] Switching to clocksource tsc
[    1.925077] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133
[    1.925160] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.927029] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.927229] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880246c87678), AE_NOT_FOUND (20110623/psparse-536)
[    1.927491] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.927688] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880246c87650), AE_NOT_FOUND (20110623/psparse-536)
[    1.928322] ata1.00: configured for UDMA/133
[    1.928659] scsi 0:0:0:0: Direct-Access     ATA      ST9500420AS      0002 PQ: 0 ANSI: 5
[    2.025689] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.025755] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.026174] hub 1-1:1.0: USB hub found
[    2.026404] hub 1-1:1.0: 6 ports detected
[    2.136616] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.248489] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.250538] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ES, 1.20, max UDMA/100
[    2.253301] ata3.00: configured for UDMA/100
[    2.258308] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A2ES  1.20 PQ: 0 ANSI: 5
[    2.268884] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.268974] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.269432] hub 2-1:1.0: USB hub found
[    2.269593] hub 2-1:1.0: 6 ports detected
[    2.340500] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[    2.575951] ata4: SATA link down (SStatus 0 SControl 300)
[    2.581102] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.581249] sd 0:0:0:0: [sda] Write Protect is off
[    2.581316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.581343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.583925] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.584029] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.584277] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.626422] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58e5
[    2.626530] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.626617] usb 1-1.5: Product: TOSHIBA Web Camera
[    2.626691] usb 1-1.5: Manufacturer: YZB5U5AZ
[    2.626756] usb 1-1.5: SerialNumber: 0x0001
[    2.638479]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    2.639486] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.641484] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.641716] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    3.468970] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.054804] udev[353]: starting version 164
[    5.356998] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    5.357088] ACPI: Power Button [PWRB]
[    5.357241] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    5.357358] ACPI: Lid Switch [LID]
[    5.357492] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.357577] ACPI: Power Button [PWRF]
[    5.435208] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.561044] cfg80211: Calling CRDA to update world regulatory domain
[    5.586356] ACPI: AC Adapter [ADP1] (off-line)
[    5.624047] ACPI: Battery Slot [BAT1] (battery present)
[    5.624807] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[    5.629112] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[    5.786995] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[    5.787158] input: Toshiba input device as /devices/virtual/input/input5
[    5.789190] Registered led device: toshiba::illumination
[    5.922816] Linux media interface: v0.10
[    6.005571] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    6.034914] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    6.105029] Linux video capture interface: v2.00
[    6.111633] [drm] Initialized drm 1.1.0 20060810
[    6.112593] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.112735] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    6.112763] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.113234] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera (0bda:58e5)
[    6.120956] input: TOSHIBA Web Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
[    6.121104] usbcore: registered new interface driver uvcvideo
[    6.121167] USB Video Class driver (1.1.1)
[    6.151095] ath9k 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.151188] ath9k 0000:04:00.0: setting latency timer to 64
[    6.203936] ath: EEPROM regdomain: 0x65
[    6.203940] ath: EEPROM indicates we should expect a direct regpair map
[    6.203944] ath: Country alpha2 being used: 00
[    6.203946] ath: Regpair used: 0x65
[    6.223616] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    6.224038] Registered led device: ath9k-phy0
[    6.224045] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900058a0000, irq=18
[    6.780100] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    6.857274] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.857500] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.857811] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.857952] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.858198] i915 0000:00:02.0: power state changed by ACPI to D0
[    6.858269] i915 0000:00:02.0: power state changed by ACPI to D0
[    6.858339] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.858409] i915 0000:00:02.0: setting latency timer to 64
[    6.898085] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[    6.898167] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    6.898527] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    6.898533] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.898597] [drm] Driver supports precise vblank timestamp query.
[    6.898690] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.441220] fbcon: inteldrmfb (fb0) is primary device
[    7.619279] Console: switching to colour frame buffer device 170x48
[    7.622112] fb0: inteldrmfb frame buffer device
[    7.622133] drm: registered panic notifier
[    7.623987] acpi device:05: registered as cooling_device4
[    7.624179] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[    7.624300] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    7.624423] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.904047] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
[    7.956374] EXT4-fs (sda6): re-mounted. Opts: (null)
[    7.996862] usb 2-1.6: New USB device found, idVendor=0930, idProduct=0215
[    7.996926] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.039955] Bluetooth: Core ver 2.16
[    8.039995] NET: Registered protocol family 31
[    8.040017] Bluetooth: HCI device and connection manager initialized
[    8.040047] Bluetooth: HCI socket layer initialized
[    8.040070] Bluetooth: L2CAP socket layer initialized
[    8.040096] Bluetooth: SCO socket layer initialized
[    8.058404] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    8.058474] usbcore: registered new interface driver btusb
[    8.067555] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[    8.116449] Bluetooth: Error loading firmware
[    8.117696] ath3k: probe of 2-1.6:1.0 failed with error -5
[    8.118855] usbcore: registered new interface driver ath3k
[    8.312025] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    8.476239] device-mapper: uevent: version 1.0.3
[    8.477492] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    8.765531] Intel AES-NI instructions are not detected.
[    8.909023] padlock_sha: VIA PadLock Hash Engine not detected.
[    9.140762] loop: module loaded
[    9.199884] Adding 3998716k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:3998716k 
[    9.696902] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.716120] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   10.467195] fuse init (API version 7.17)
[   12.505527] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[   12.561186] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[   12.563019] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.622917] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.251417] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.252480] Bluetooth: BNEP filters: protocol multicast
[   13.279275] Bridge firewalling registered
[   13.325245] Bluetooth: RFCOMM TTY layer initialized
[   13.326668] Bluetooth: RFCOMM socket layer initialized
[   13.326671] Bluetooth: RFCOMM ver 1.11
[   13.523885] lp: driver loaded but no devices found
[   13.546587] ppdev: user-space parallel port driver
[  189.706799] wlan0: authenticate with 00:03:52:ef:13:20 (try 1)
[  189.709352] wlan0: authenticated
[  189.709401] wlan0: associate with 00:03:52:ef:13:20 (try 1)
[  189.711599] wlan0: RX AssocResp from 00:03:52:ef:13:20 (capab=0x1 status=0 aid=6)
[  189.711605] wlan0: associated
[  189.713466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  199.916865] wlan0: no IPv6 routers present
[  225.561622] wlan0: deauthenticating from 00:03:52:ef:13:20 by local choice (reason=3)
[  225.637733] cfg80211: Calling CRDA to update world regulatory domain
[  226.584769] wlan0: authenticate with 00:03:52:ef:13:20 (try 1)
[  226.587601] wlan0: authenticated
[  226.587661] wlan0: associate with 00:03:52:ef:13:20 (try 1)
[  226.589963] wlan0: RX AssocResp from 00:03:52:ef:13:20 (capab=0x1 status=0 aid=6)
[  226.589972] wlan0: associated
[  294.889820] wlan0: deauthenticating from 00:03:52:ef:13:20 by local choice (reason=3)
[  294.941858] cfg80211: Calling CRDA to update world regulatory domain
[  295.893035] wlan0: authenticate with 00:03:52:ef:13:20 (try 1)
[  295.895048] wlan0: authenticated
[  295.895098] wlan0: associate with 00:03:52:ef:13:20 (try 1)
[  295.897408] wlan0: RX AssocResp from 00:03:52:ef:13:20 (capab=0x1 status=0 aid=6)
[  295.897416] wlan0: associated
[  312.727451] wlan0: deauthenticating from 00:03:52:ef:13:20 by local choice (reason=3)
[  312.767300] cfg80211: Calling CRDA to update world regulatory domain
[  313.715456] wlan0: authenticate with 00:03:52:ef:13:20 (try 1)
[  313.717378] wlan0: authenticated
[  313.737978] wlan0: associate with 00:03:52:ef:13:20 (try 1)
[  313.740286] wlan0: RX AssocResp from 00:03:52:ef:13:20 (capab=0x1 status=0 aid=6)
[  313.740294] wlan0: associated
[ 2909.774776] wlan0: deauthenticating from 00:03:52:ef:13:20 by local choice (reason=3)
[ 2909.842413] cfg80211: Calling CRDA to update world regulatory domain
[ 2913.637892] wlan0: Selected IBSS BSSID c2:0f:e7:47:b1:8e based on configured SSID
[ 2913.680025] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3499.524330] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3530.505287] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3579.379528] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3610.360478] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3641.301330] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3699.063970] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3729.989797] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3760.970917] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3818.887281] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3849.816735] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3870.431113] wlan0: Trigger new scan to find an IBSS to join
[ 3871.522775] wlan0: authenticate with 00:00:00:00:00:20 (try 1)
[ 3871.719455] wlan0: authenticate with 00:00:00:00:00:20 (try 2)
[ 3871.919149] wlan0: authenticate with 00:00:00:00:00:20 (try 3)
[ 3872.118929] wlan0: authentication with 00:00:00:00:00:20 timed out
[ 3882.430760] wlan0: authenticate with 00:00:00:00:00:20 (try 1)
[ 3882.626640] wlan0: authenticate with 00:00:00:00:00:20 (try 2)
[ 3882.826422] wlan0: authenticate with 00:00:00:00:00:20 (try 3)
[ 3883.026108] wlan0: authentication with 00:00:00:00:00:20 timed out
[ 3893.341784] wlan0: direct probe to 00:03:52:ef:13:20 (try 1/3)
[ 3893.537870] wlan0: direct probe to 00:03:52:ef:13:20 (try 2/3)
[ 3893.737590] wlan0: direct probe to 00:03:52:ef:13:20 (try 3/3)
[ 3893.937269] wlan0: direct probe to 00:03:52:ef:13:20 timed out
[ 3898.892241] wlan0: Trigger new scan to find an IBSS to join
[ 3902.008984] wlan0: Trigger new scan to find an IBSS to join
[ 3905.075399] wlan0: Trigger new scan to find an IBSS to join
[ 3906.143225] wlan0: direct probe to 00:03:52:ef:13:20 (try 1/3)
[ 3906.342208] wlan0: direct probe to 00:03:52:ef:13:20 (try 2/3)
[ 3906.541878] wlan0: direct probe to 00:03:52:ef:13:20 (try 3/3)
[ 3906.741598] wlan0: direct probe to 00:03:52:ef:13:20 timed out
[ 3917.053357] wlan0: direct probe to 00:03:52:ef:13:20 (try 1/3)
[ 3917.249429] wlan0: direct probe to 00:03:52:ef:13:20 (try 2/3)
[ 3917.449021] wlan0: direct probe to 00:03:52:ef:13:20 (try 3/3)
[ 3917.648816] wlan0: direct probe to 00:03:52:ef:13:20 timed out
[ 3927.974441] wlan0: authenticate with 00:00:00:00:00:a0 (try 1)
[ 3928.172626] wlan0: authenticate with 00:00:00:00:00:a0 (try 2)
[ 3928.372338] wlan0: authenticate with 00:00:00:00:00:a0 (try 3)
[ 3928.571923] wlan0: authentication with 00:00:00:00:00:a0 timed out
[ 3933.517794] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3938.403479] wlan0: direct probe to 00:03:52:ef:13:20 (try 1/3)
[ 3938.600543] wlan0: direct probe to 00:03:52:ef:13:20 (try 2/3)
[ 3938.800249] wlan0: direct probe to 00:03:52:ef:13:20 (try 3/3)
[ 3938.999935] wlan0: direct probe to 00:03:52:ef:13:20 timed out
[ 3949.311807] wlan0: authenticate with 00:00:00:00:00:20 (try 1)
[ 3949.507840] wlan0: authenticate with 00:00:00:00:00:20 (try 2)
[ 3949.707534] wlan0: authenticate with 00:00:00:00:00:20 (try 3)
[ 3949.907223] wlan0: authentication with 00:00:00:00:00:20 timed out
[ 3960.223093] wlan0: authenticate with 00:00:00:00:00:20 (try 1)
[ 3960.419041] wlan0: authenticate with 00:00:00:00:00:20 (try 2)
[ 3960.618686] wlan0: authenticate with 00:00:00:00:00:20 (try 3)
[ 3960.818465] wlan0: authentication with 00:00:00:00:00:20 timed out
[ 4158.656589] wlan0: direct probe to 00:03:52:ef:13:20 (try 1/3)
[ 4158.855466] wlan0: direct probe to 00:03:52:ef:13:20 (try 2/3)
[ 4159.055165] wlan0: direct probe to 00:03:52:ef:13:20 (try 3/3)
[ 4159.254762] wlan0: direct probe to 00:03:52:ef:13:20 timed out
[ 4169.567858] wlan0: authenticate with 00:00:00:00:00:20 (try 1)
[ 4169.766826] wlan0: authenticate with 00:00:00:00:00:20 (try 2)
[ 4169.966522] wlan0: authenticate with 00:00:00:00:00:20 (try 3)
[ 4170.166217] wlan0: authentication with 00:00:00:00:00:20 timed out
[ 4180.482141] wlan0: authenticate with 00:00:00:00:00:a0 (try 1)
[ 4180.678148] wlan0: authenticate with 00:00:00:00:00:a0 (try 2)
[ 4180.877891] wlan0: authenticate with 00:00:00:00:00:a0 (try 3)
[ 4181.077490] wlan0: authentication with 00:00:00:00:00:a0 timed out
[ 4430.495412] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4431.525140] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4431.535920] wlan0: Selected IBSS BSSID 0a:81:2d:f9:5c:f9 based on configured SSID
[ 4431.611353] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 4434.638824] wlan0: Trigger new scan to find an IBSS to join
[ 4435.038890] wlan0: Selected IBSS BSSID 0a:81:2d:f9:5c:f9 based on configured SSID
[ 4435.123663] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 4441.698250] wlan0: no IPv6 routers present

Last edited by bedhead (2012-07-03 17:58:23)

Offline

#11 2012-07-03 17:59:36

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM Controller [8086:0104] (rev 09)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09)
    Subsystem: Toshiba America Info Systems Device [1179:0005]
    Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b4)
    Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b4)
    Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 3 [8086:1c14] (rev b4)
    Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 5 [8086:1c18] (rev b4)
    Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b4)
    Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev b4)
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller [8086:1c49] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c03] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: ahci
01:00.0 System peripheral [0880]: Ricoh Co Ltd Device [1180:e823] (rev 07)
    Subsystem: Toshiba America Info Systems Device [1179:0001]
    Kernel driver in use: sdhci-pci
04:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
    Subsystem: Lite-On Communications Inc Device [11ad:6613]
    Kernel driver in use: ath9k
05:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
    Subsystem: Toshiba America Info Systems Device [1179:0001]

Offline

#12 2012-07-03 18:01:27

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

nothing connected at boot.

Offline

#13 2012-08-15 06:57:55

bedhead
Member
Registered: 2012-06-05
Posts: 21

Re: [Resolved] 3.2.0-0.bpo.2-amd64 system crash on boot

Closing -  as cause can not be identified, a work around is to increase the countdown on the bootlooder before booting into CrunchBang...

Offline

Board footer

Powered by FluxBB

Copyright © 2012 CrunchBang Linux.
Proudly powered by Debian. Hosted by Linode.
Debian is a registered trademark of Software in the Public Interest, Inc.

Debian Logo